Used Edge Glue Machine for sale (65,930)

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Knedpsxc Hhkjfx Ap Doc

Condition: good (used), Year of construction: 1989, Machine with full equipment Length approx. 9 m Jointing Rip sawing Knsdpfof Ua R Hsx Ap Dec Dadoing Rounding Edge profiling Scraping Edge profiling

Condition: used, Year of construction: 2014, functionality: fully functional, Processing material: 1K silicone – Single-component silicone for sealing glass. Knjdpsznbv Tsfx Ap Dsc Silicone application: Sealing the glass. Application along the glass/profile contour. Processing position: Vertical workpiece guidance and processing.

Condition: new, Year of construction: 2025, HEBROCK Edge Bander F2 next with SPS control system (incl. touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: pre-milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable tank incl. glue discharge device, HF cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combi version), robust chain drive, double roller upper pressure with ball bearings, Kodswmdbropfx Ap Donc inspection window on the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Including: F2/500/10 Whispercut pre-milling head F2/500/20 Combination milling head F2/500/2 Radius cutter R=2mm F2/12 Surface scraper (incl. pneumatic lift)

Condition: used, Year of construction: 1997, - Edge banding unit - Cutting unit - Milling unit Ksdpod Inktjfx Ap Dsnc - Fine milling unit - Scraper blade - Buffing unit

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment Kedpei Am U Defx Ap Dsnc (radius, chamfer, flush trimming)

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Kodpfx Apjzq Dczj Djnc Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: used, Year of construction: 1990, Second-hand machine Year of manufacture: 1990 Features and technical specifications: - Automatic edge feeding - Cartridge gluing system - 4-roller pressure unit - Cross-cut saw unit - Flush milling unit - Combined milling unit for flush, chamfer and radius - Radius scraper blade - Sanding unit - Edge banding thickness 0.3–20 mm - Edge banding height: max. 66 mm - Edge banding length: min. 200 mm - Feed rate 8/16 or 12/24 m/min Availability: at short notice Storage location: 63934 Röllbach Knodpfx Aszk N Amep Dec

Condition: new, Year of construction: 2025, Edge banding machine F5 with PLC control (including 15" touchscreen), hot melt adhesive application to the workpiece for edge banding material up to 3 mm: Joint milling cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with interchangeable pot preparation, Knjdpsh Hl Ayjfx Ap Dec including adhesive dispensing device, HF milling station with pneumatic milling adjustment, including corner rounding milling cutter, radius trimming knife, edge trimming knife (including pneumatic extraction device), finishing station Joint head Whispercut Combination milling head Radius milling cutter R=2mm Radius corner milling cutter R=2mm Quick-change preparation for corner milling cutter Radius change motor R=1mm Multi-radius trimming knife R1/R2 Chassis Spray device for release agent (PUR) Spray device for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDING 2nd interchangeable glue pot max. edge thickness 3mm Workpiece thickness 8-50mm min. workpiece length approx. 160mm Feed speed 10m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300x1300x1400mm LxWxH Weight approx. 900kg Extraction port 1 x 140mm

Condition: like new (used), Edge milling machine for deburring/beveling of various internal and external contours Bevel size adjustable up to max. 10 mm at 45° Knodpfxotwcn Ro Ap Dec Cutter 45° / 8 blades double row – KIF/MF. For steel, light metal, stainless steel, cast iron, non-ferrous metals Includes 21 packages of 10 indexable inserts X11.30.35.45 P25 BS TiCN Includes 7 packages of 10 fastening screws for X11.30.35.45 Available at extra cost: 1 milling head 30° 1 milling head 35° 1 milling head 45° 1 milling head 60° Ex works, excl. VAT.

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Kedpfx Apswiv Dko Donc Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Weight kg 1500

Condition: excellent (used), Year of construction: 2015, Glass thickness: Adjustable from 3 to 28 mm Max. sheet dimensions: Up to 2000 x 3000 mm Power consumption: Approx. 13.8 kW This 8-spindle machine is well-maintained and in good condition. Approx. 15,000 m run. Last service in fall 2025. Accessories: Water tank, pump, and spare parts. Dimensions: Width: 6,500 mm Depth: 1,600 mm Height: 2,600 mm Kedpfxez Ekcbj Ap Donc Weight: 3,200 kg Condition: Very good, second-hand

Condition: new, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Exhibition machine- New: GLUJET GJ725 Kodpju R Sy Asfx Ap Denc This offer includes an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Joiner milling unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Glu Jet GJ725 NC PUR PRO adhesive application system - Press unit 1912-3 pneumatic - Trimming unit 1918 pneumatic 60 mm - Multifunction milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, R 2, left-hand rotation - Diamond cutter Ø 56/60 mm, R 2, right-hand rotation - Corner copying unit FF301 MOT1 - Scraping blade unit ZK301 MOT4 incl. high-gloss package - Tungsten carbide inserts for scraping blade carrier - Chip collection box for scraping blade unit - Buffing unit 1940 - Spray device TR301 for the infeed and outfeed area - Motorized adjustment of the pressure beam - iTronic adaptive pressure and adhesive quantity control - Infeed fence long 1,252 mm - Motorized adjustment of the infeed fence - Press unit DW301 with motorized NC axis - Extraction hoods for trimming unit 1918 - Shelving program - Surface scraping blade FK701 - Spray device GM301 after the press unit - new exhibition machine -

Condition: good (used), 1 x Edge grinding machine Christen KB 2 Technical data: Working area: Guide rail length: 370 mm Sheet metal thickness: 0 to 2 mm, max. edge passage with guide rails fully open: 3 mm Speed: 3400 rpm Grinding wheel: 150 x 125 x 42 mm + 125 x 90 x 42 mm Accessories: 2 x grinding wheel with flange 1 x additional flange 1 x wrench for changing grinding wheels Knjdpfxofwx Dae Ap Dec The machine can be inspected while powered on.

Condition: used, Year of construction: 1990, Storage location: Nattheim Kodpfx Apsz H Tw De Djnc

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Knodop N D Ngspfx Ap Dec Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Kodezwt Rbopfx Ap Donc

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction Knjdszpblqopfx Ap Doc - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Condition: good (used), Year of construction: 1995, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg Knsdpfxscg Al Sj Ap Dsc

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Manufacturer: Tünkers GmbH Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Knsdpfx Apsz Sm U Aj Djc Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Kedpfx Aozy E D Ssp Dsnc Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2019, Edge banding machine Manufacturer: SCM Type: Minimax E10 Year of manufacture: 2019 Technical data Edge thickness (strip material): 0.4 - 3.0 mm Edge thickness with shear cutter at 80 mm edge height: 0.4 - 1.5 mm Edge thickness with shear cutter at 50 mm edge height: 0.4 - 2.5 mm Edge thickness with shear cutter at 45 mm edge height: 0.4 - 3.0 mm Edge height: 10 - 84 mm Workpiece thickness: 8 - 80 mm Minimum workpiece width: 50 mm Minimum edge length: 210 mm Knsdpfxszuykpo Ap Doc Minimum inner radius (concave) at 0.4 mm edge: 25 mm Minimum outer radius (convex) at 0.4 mm edge: 5 mm Feed speed: 4 / 8 m/min Processing temperature: 140 - 220 °C Edge feed Integrated shear cutter for cutting edge material from the roll. Roll table for holding roll material. Suitable for ABS edges, melamine edges, veneer edges, and other pre-fabricated edge strips. Gluing system Teflon-coated glue tank below the table top. Continuous glue circulation to prevent glue deposits. Fast heating time of approx. 7 minutes. Standby function with timer. Glue tank capacity: 1.5 liters. Pressure system Motor-driven glue application roller. One free-running pressure roller. Foot pedal for start and stop control of the working cycle. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Knjdpfx Apolht H No Dsc Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2011, Edge banding, profile milling, corner copying, pull blade. Connected load: 10 kW. Dust extraction diameter: 1x 120 / 3x 60 / 1x 100 mm. Kodpfx Apezx Tlns Dsnc Feed rate: 10 m/min. Workpiece thickness: 8 - 50 mm. Edge thickness: 0.4 - 3.0 mm. Roller separation: max. 0.4 - 3.0 mm x 45 mm. Working height: 950 mm. Dimensions: 4280 x 1300 x 2180 mm. Weight: approx. 1400 kg. Location: Nattheim.

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: Kedjzuyilspfx Ap Dsnc The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.