Used Edge Machine for sale (64,825)

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Ijdpfx Ajxy Tm Ijbrohu

Condition: used, Year of construction: 2015, Brand: Piovan Type: Dryer HR2000651 Model: HRM200 Serial No.: 08 020 044/07 0135 Dry Air Quantity: 200 m³/h Hopper capacity: 3 × 300 dm³ Connected load max: 38 kW Year of manufacture: 2015 Isdpfxexvdh Ij Abrjhu and Model: PTUSET Year of manufacture: 2017 Connected load max: 9.0 kW

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Ihedpfx Ajq Ny R Ssbrsu

Condition: like new (used), We are offering a lightly used glass grinding machine with 8 spindles from Bohle. Year of manufacture: 2012. Iodpfx Aeyi Dxhebrshu

Condition: good (used), Year of construction: 1999, Very well maintained machine. With water tank and pump Ihsdpeyic S Defx Abreu (without water treatment system) Total length: 6000 mm Height: 3100 mm

Year of construction: 2015, condition: ready for operation (used), A CNC contour processing system HML for precise edge processing and contour milling of technical laminates or printed circuit boards (PCBs) is available. Weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Ihodpexd Avmjfx Abrju

Year of construction: 2006, condition: ready for operation (used), Glue type: PUR glue, glue application system: cartridges, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Including various spare parts and Ligmatec return. Documentation available. On-site inspection is possible. Iodpfx Absugmw Ejrjhu

Condition: good (used), Year of construction: 2007, functionality: fully functional, 10 cup wheels vertiocal glass edging machine glass thikness : 3 - 30 mm min. glass size : 50 x 50 mm max. glass weight : 1000 kg working height : 812 mm Ihedpfx Asyhpqaobrsu total power : 16,3 Kw water tank capacity : 422 L working speed : 0,5 - 5,5 m/min. weight : 2890 kg The machine has worked with a flocculant .

Condition: used, Year of construction: 2022, 0,4 - 5 mm Workingpiece thickness from to 10 - 45 mm Iedpexpn Ufofx Abrehu Feed speed 8 m/min.

Condition: good (used), Year of construction: 2018, 0,4 - 6 mm Workingpiece thickness from to 8-60 mm Total length 3960 mm Feed speed 10 m/min. Iedpfxex I Sgrs Abrehu Weight 1055 kg

Condition: good (used), Year of construction: 1998, 0.4-5 mm Workingpiece thickness from to 10-50 mm Iedpfox Tu Rdex Abrohu Total length 2730 mm Weight 720 kg

Year of construction: 2016, condition: ready for operation (used), Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t. Ijdpfein U I Uox Abrehu

Condition: good (used), Year of construction: 2002, functionality: fully functional, Veneer sanding unit, 4 kW, 400 Volt, oscillation, chassis, motor power 2.2 kW, 4-roller feed, Haffner stepless feed, sanding belt 2640 x 150 mm, table 960 x 460 mm, swiveling range 45°-90°, 2 x 100 mm ø extraction ports, length 1800 x 1000 mm, weight 310 kg, good condition. Price ex works. Transport available at extra cost! Isdpfxoyayuto Abrehu

Condition: used, Storage location: Sonnefeld Iedpfx Asway Dcjbrjhu

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Ihodpfx Absvvkd Torsu Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Iodpfx Absvvkfdjrehu

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Ihedjvvkfqjpfx Abrsu Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Iodjvvkfwspfx Abrohu Storage location: Nattheim

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Ijdexyiilopfx Abrehu

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Ihjdpfx Aevvkg Ijbrju Storage location: Nattheim

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis stone CNC machine for edge finishing/ tap and sink holes - fits BT40ER40/80 - 15 tool holders included - vacuum pump included - including automatic zero point determination via compressed air cylinders - excluding water installation - control cabinet dimensions 900x600x1800 mm Ihsdev Dulqepfx Abrsu

Condition: excellent (used), Edge Sander De Stefani MVT Ihodpfx Asydkbfebreu 2 sanding units Maximum workpiece height: 80mm Self-adjusting sanding unit Manual adjustment of sanding unit Manual angle adjustment of unit Oscillating sanding units Feed speed controlled by variator Feed motor power: 0.74 kW

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, grinding belt length: 2,600 mm, grinding belt width: 200 mm, grinding height: 200 mm, power: 2.85 kW (3.87 HP), Edge sander WEGOMA model KS2600/KS2600FU with oscillation. Feature Technical Data Sanding belt dimensions: 2600 x 200 mm Motor power (belt): approx. 2.25 kW Oscillation: electromechanical, can be switched off separately Oscillation motor: approx. 0.25 kW Belt speed: approx. 15 m/sec Main table size: 935 x 460 mm Auxiliary table: 350 x 300 mm (often at the belt tensioning roller) Swivel range: Aggregates adjustable via hand wheel (0° to 90°) Ijdsyhglzepfx Abrohu Weight: approx. 260 kg

Condition: used, Year of construction: 1978, sheet width . mm Ihsdpfx Asucgvaobrou plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Ihjdpfxsw Aig Se Abrsu