Used Edge Machine for sale (65,494)

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: Fpodpfozk Nmrex Al Uen - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Fpjdpfxjyga T Nj Al Usn Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Fpjdpfxjy Dd Igo Al Uon Location: Nattheim

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Fedpfx Aezwt Rbsl Uopn

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Fedpfezy E D Sex Al Uopn Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Fedpszuyhnofx Al Uepn Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Fodozz Rh Sspfx Al Uepn Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Condition: good (used), Year of construction: 2006, functionality: fully functional, PRAWEMA 2005 204 HS-W Fpsdpfx Aljvm Efao Ujn PRAWEMA 2006 SYNCHROFINE 205 HS

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Fsdeuhv R Depfx Al Uspn Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Fjdovvkfqspfx Al Uopn

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Fpedpfx Aezk N Eusl Ujn Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Fpodpfxjzidi Ss Al Ujn

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fodpfx Aovvkfdsl Uopn

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 Fsdpfxjwlzz To Al Uspn max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Fjdpfjzuyhhsx Al Ujpn Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder/Hammer edge sanding machine HS 950 for edge, surface, and contour sanding in woodworking shops. Suitable for finishing workpiece edges, moldings, frames, and wood components. Key technical data - Machine type: Edge sanding machine / oscillating belt sander - Model: Hammer HS 950 / Felder HS 950; according to the inventory note, the model is not clearly identifiable. - Sanding belt dimensions: approx. 2515 x 150 mm - Sanding table length: approx. 950 mm - Sanding belt speed: approx. 17 m/s - Motor power: approx. 2.2 kW - Table height adjustment: approx. 0–150 mm - Sanding unit tilt: approx. 45°–90° or continuously adjustable up to 90° - Dust extraction port: approx. 120 mm - Dimensions: approx. 1540 x 530 x 1235 mm - Weight: approx. 165 kg Features Fpodpfx Ajztxqfel Usn - Switchable oscillation for a uniform sanding pattern and longer sanding belt life - A useful addition for clean edge processing and finishing work - Of interest for carpentry shops, training workshops, and woodworking shops No guarantee.

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Fpedpfx Aleu Ngfde Ujn Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: new, 0 0,4 - 3 mm Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. Fpedey Ay Akepfx Al Usn total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: as good as new (ex-display), Edge banding machine as demo unit 5 units (aggregates): Joint trimming unit incl. AIGNER diamond joint cutter heads, with Konstantin DIA interchangeable knife system and controlled edge air-blast nozzle behind the second joint cutter head. End trimming unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, incl. - Extraction device with chip collection box for scraper shavings - with Easy Set adjustment system - 2 digital readouts Flat scraper unit with 4-way usable scraper blades. The unit is retractable. General features: - High-gloss package: tracing rollers for the radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety enclosure for all processing units and the glue pot - Teflon-coated glue pot with energy-saving mode in standby - Glue application roller with feed screw for long and tall workpieces - Pressure zone with motor-driven 1st steel pressure roller + 1 rubber roller - Reel shear for edging 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Fpodpfx Aew Rcmyol Uon Feed speed: 7 m/min Extraction connections: 3 x 150 mm Connection: 8 kW - 400 V / pneumatic: 6 bar

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air Fpjdpfxjzk N Ehj Al Uen - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: used, LASM belt edge grinder, Fodpozxz Tasfx Al Uopn Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, 150mm wide abrasive belt, Oscillation, Angle-adjustable table, Used machine, ready for operation.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) Fpjdpfx Ajzuyk Nol Uen EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2016, condition: ready for operation (used), Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t. Fsdpsin U I Ujfx Al Uopn

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Fpodpfx Aljw Tfw Ho Uen Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Fpedpfou Rc Ansx Al Uen Buffing unit SZ 30 (Kw 0,37 x 2)