Used Electro Geberit Welding Machine for sale (67,338)

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Hjdpfx Afezd Rmge Aenr Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO18 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Hedpszlfv Sjfx Af Aenr We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2009, condition: used, functionality: fully functional, We are offering this used 6-head PVC window and door welding machine from SYMATEC, model SWA-6L-H, manufactured in 2009. If you have any questions or require further information, please do not hesitate to send us a message or call us. Hedpfx Aozk Eabjf Asnr

Condition: ready for operation (used), A DALEX DC spot welding machine is offered, particularly suitable for welding aluminum. Rated power: 96kVA, throat depth: 700mm, cylinder version: DH double-stroke cylinder, maximum electrode stroke: 90mm, pre-stroke: 65mm, working stroke: 25mm, maximum stroke frequency: 400strokes/min, maximum electrode opening: 180mm, minimum/maximum arm spacing: 115mm/415mm, electrode holder diameter: 30mm, control system: DALEX MPS 8043/1. Machine dimensions: approx. 1700mm/850mm/1750mm, weight: 740kg. Inspected in a specialist workshop. An on-site inspection is possible. Hsdpfxszl Em Rj Af Aonr

Condition: good (used), *DESCRIPTION* Hodpfxozczw Is Af Asnr Professional ARO AROMASTER II welding set, year 1997. Medium-frequency spot welding unit, 1000Hz, delivered complete with its 2 original tools. ARO Château-du-Loir brand = a global reference in resistance welding. Robust equipment, spare parts always available. *LOT COMPOSITION* 1. *AROMASTER II Generator* Code ZU182000 - No. 9713221A523 - Year 1997 400V Three-phase 50Hz - 20.7 kVA at 100% / 29.3 kVA max Integrated water cooling - NF A 82-020 standard 2. *ARO YB200450 X-Gun* No. 9712211B669 - Year 1997 Water-cooled - 450mm copper arms - Force ∼300 daN 3. *ARO YB200550 Dent Puller Gun* No. 9712211B640 - Year 1997 For welding pull studs Ø2.5mm *TECHNICAL SPECIFICATIONS* Brand: ARO - Made in France Technology: Medium frequency 1000 Hz Power supply: 400V Three-phase 32A minimum Welding current: ~10,000 A Weldable thicknesses: Steel 0.6 to 2.0 + 2.0 mm Control: Digital - Time/intensity adjustment Cooling: Water - Integrated unit Generator weight: Approximately 110 kg - On castors *CONDITION & WARRANTY* Set in good overall working condition. Tested in the Gortina workshop: cycles with gun and puller OK, pneumatic pressure OK, no water leaks, thyristors OK. Original ARO yellow paint. Cables and wiring in good condition. *ADVANTAGES* 1. *2-in-1 Set*: Spot welding + inertia dent pulling. One generator only. 2. *ARO Reliability*: Industrial construction. National after-sales service. 3. *Economy*: Equivalent new cost 2026 > €15,000 (excluding VAT). 4. *Ready for use*: Generator + gun + puller, original 1997. *APPLICATIONS* Traditional automotive bodywork, vehicles before 2010, vans, 4x4s, restoration of old vehicles. Dent pulling without paint. Training centers.

Condition: good (used), Year of construction: 2000, *TECHNICAL SPECIFICATIONS* Make / Model ARO MC30CSC Year 2000 Serial No. 0001122B122 Type Fixed spot welding machine with swan neck Power Supply 400V Three-phase 50Hz - 50A Power 21 kVA at 100% / 78 kVA max Max. Welding Current 19,000 A Clamping Force 358 daN 358 kg Swan Neck Depth 550 mm Arm Spacing 174 to 489 mm Cooling Water 5 L/min - 6 bar Control ARO Micro 2X16 III digital Multi-parameter programs Weight 270 kg Standards CE - NF A 82-020 - Made in France *SUPPLIED EQUIPMENT* - Complete machine on chassis - 1 pair of mounted, water-cooled copper arms Hnsdpfx Afozczwhe Aor - Micro 2X16 III digital control with key - ARO operating manual *CONDITION* Machine in excellent working condition. Tested and inspected in the workshop: welding cycles OK, pressure build-up OK, no water leaks, thyristors OK. Original yellow ARO paint. Ready for production. *ADVANTAGES* 1. *Power*: 78 kVA for welding steel up to 3+3 mm and stainless steel 2+2 mm. 2. *ARO Reliability*: Leading brand, spare parts always available. 3. *Modern Control*: Micro 2X16 for precise adjustment of time/intensity/force. 4. *Versatile*: 550mm swan neck for large parts. *APPLICATIONS* Manufacturing of grids, baskets, metal frames, assembly of industrial sheet metal, locksmithing, industrial bodywork.

Condition: like new (used), Power at 50%: 35kVA Short circuit-current: 15,5kA Electrode force: 470daN / double stroke Throat depth: 400mm --- Weld control: TE 101 (8-times, 100-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock Hnsdpozl A S Rofx Af Ajr

Condition: like new (used), Year of construction: 2021, Power at 50%: 50kVA Short circuit-current: 25kA Electrode force: 420daN Throat depth: 380-700mm --- Hodpfx Aozl A Rtof Ajnr Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0720, Year of construction: 2015, overall weight: 370 kg, laser power: 200 W, travel distance Z-axis: 570 mm, laser source model: LS-PEC 200, A comprehensive service costing €5,000 was recently performed on the system by the manufacturer. The lamp, mirror, and cooling circuit pump were replaced. The system was initially used as an exhibit from 2015 to 2018. From 2020, the system was used at approximately 50% capacity, and from 2023, only one day per week! Ideal for toolmaking, repair, or die-casting part refurbishment! TECHNICAL DETAILS Laser type: Nd:YAG Laser source: LS-PEC 200 Average power max.: 200 W Pulse peak power: 9 kW Pulse energy: max. 100 J Pulse duration: 0.4–20 ms Pulse frequency: 1–20 Hz (100 Hz) Focus diameter: 0.2–2.0 mm Positioning speed: 0.5–15 mm/s X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 570 mm MACHINE DETAILS Electrical connection data Mains voltage: 400 V Phases: 3 Mains frequency: 50 Hz Dimensions & weight Dimensions (L x W x H): 950 x 1,550 x 1,250 mm Weight: 370 kg Hedozlqt Nopfx Af Asnr Total pulses: 56,527,413 EQUIPMENT Joystick control LED lighting Swivel device for the resonator to weld large molds Protective gas supply directly controlled via a solenoid valve Heavy-duty castors Laser resonator including resonator mechanics Laser rod Resonator cavity Resonator mirror Safety shutter Power supply including mains fuse Mains switch Emergency stop switch Motor protection switch Interface with hardware monitoring function Lamp switch Industrial controller Capacitor bank

Condition: good (used), - Capacity 100 kVA - Pneumatic Hedjykcnqjpfx Af Aenr - Throat depth 570 mm - 380 V

Condition: used, SURFACING AND JIG BORING MACHINE DUAP ZS 80/1400 Hjdpjzcprmofx Af Aenr • Maximum piece length: 1500 mm • Minimum piece length: 70 mm • Maximum piece diameter: 80 mm • Minimum piece diameter: 10 mm

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Hnodpfx Ajx Ic T Aof Aor Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Year of construction: 1999, condition: excellent (used), Spot welding machine NIMAK PMP 5/35 + water cooling unit Year of construction approx. 1980 Power at 50% ED 35 kVA Projection 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely adjustable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insertion electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Hnsdsium Nispfx Af Aor Adjustability of the electrode holder 200 mm Connected load 83 KVA Mains connection 380 volts, 50 Hz - 4-time control - stepless power adjustment - Single points and series points - parallel electrode guidance - Water-cooled (without cooling unit) - electric foot switch Weight 300kg

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: GN2.372.44.32, Schlatter roll seam welding machine, type no. GN2.372.44.32 Very well-maintained machine in good working order, with product cooling and extraction system. Hjdpfxsy U Uz Sj Af Ajnr Complete documentation is available. See the photo of the type plate for all details. For more information, please contact Theo Ligtenberg.

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg Hnedpjwyktnefx Af Ajr - Documentation available: No - CE certificate present: No - Serial number: 4234 - Power [A]: 450 - Power [kVa]: 50 - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, Laser welding machine with 200 watts of laser power - lamp-pumped - spot welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - weld spot from 0.1 to 3 mm - for virtually all metals (steel, stainless steel, silver, gold, titanium, etc.) Hodpeflrnisfx Af Asnr - incl. optical microscope (10x) - additionally CCD microscope with crosshair - current, pulse width, repetition rate, and frequency adjustable on the control panel - incl. protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - external cooling - power connection 230 volts / 32 amps Please also note our favorable leasing/rent-to-own offers. Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approx. 150 kg

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Hjdpfx Afszkqm He Aenr

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm Hedpfx Afjtqgnye Ajnr - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Condition: good (used), nominal power at 50% duty cycle: 8 kVA, – Capacity: 8 kVA Hsdpfevbr Dljx Af Ajnr – Timer – 380 V

Condition: excellent (used), Year of construction: 1999, 1 used, very good condition water-cooled multi-function system with MIG/MAG pulse and standard welding, MIG brazing, stick electrode welding … Manufacturer: DALEX, Made in Germany Model: VARIO MIG 400 L(W)/DV 36 L(W) Year of manufacture: 1999 This multi-function system is characterized by the following welding technologies: Hedpfx Asyrgu Rsf Aenr • Easy operation • Multi-function display • Various welding processes can be selected: o MIG/MAG o Pulse o ALU o MIG brazing o Stick electrode welding • Reduction of operating costs by 30% Technical data: Welding current range, stepless 10 - 400 A Duty cycle 100% 315 A / 30 V Duty cycle 60% 400 A / 34 V Primary voltage: 3 x 400 V Dimensions L x W x H approx. 1030 x 480 x 1300 mm Total weight approx. 125 kg Accessories / Special features: • Water cooling • Separate wire feeder DALEX DV-36 L(W) with 4-roller wire feed • Hose length 3 m • Pressure reducer • Ground cable • Chassis • Cylinder holder • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS Hnjdpfjmxkdpex Af Aor MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Hnjdomxkggepfx Af Aor Gouging (up to Ø 6.5 mm).

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine / welding system Hnjdsu Hg Aqopfx Af Aer Technical data can be found in image no. 2 You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid is available. Sale subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: ready for operation (used), Migatronic MTE 440 WIG AC/DC welding machine for steel and aluminum. Water cooling system: Migatronic CTU 3000. The maximum welding current is 440 A. Inspected by EWM Service. Hsdpfxoh Ib Ids Af Ajnr You are welcome to visit us for an inspection. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. If you have any questions, please do not hesitate to contact us by phone. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change. Shipping is exclusively to business customers; for private consumers, only collection is possible.

Condition: refurbished (used), Bag Machine , retrofit , 680mm working whidth. Hnedsxf Txhjpfx Af Aer