Used Electronic Pressure Sensor for sale (24,256)

Condition: ready for operation (used),

Condition: used, Quantity: 2 units available Functionally tested; item originates from the dismantling of equipment belonging to an automotive supplier. Manufacturer: SPS electronic Type: RL42-L Function: High-voltage relay for insulation and dielectric strength testing Switching voltage: up to 5 kV DC Switching current: up to 10 mA Coil voltage: 24 V DC Application: High-voltage test equipment, safety circuits Ijdpfezmm Ixjx Ap Djtn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Itedpfx Ajzgq Szsp Den

Condition: used, Year of construction: 2020, general refurbished, Itedpfx Apez S Rb Sj Den very good condition with preevacuation filling valves: 16 working direction: right-left (CCW)

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old * Used for only 5 working days * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 Iedpfx Apsz Aupio Dstn * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Filip Khol rohrsanierung1a.de

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min Itodpfx Aez Egmcop Den 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) New engine installed in September 2026, invoice available Imported to Sweden from Germany in 2021.

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Itsdoz Egw Uspfx Ap Den Owned by the same operator since new For cold water only; can be retrofitted for heating water.

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel steam sterilization autoclave Pass-through autoclave, GXMQ-KK.13.8JS Itsdpfxsz Td Alo Ap Den Model: STAU-26.3 Serial No.: G2310 Power: 11 kW Voltage: 380V/50Hz & 230V/50Hz Operating pressure: +0.5 bar / -0.88 bar Weight: 20,000 kg Self-dismantling and removal included.

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included Itodpfsz Nd Ndsx Ap Dsn * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling Isdpjz Dhrqjfx Ap Dotn * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Itodpsz Ega Nofx Ap Dsn Maximum pressure: 500 bar 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed.

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 Ijdpfx Aewkqmiep Detn -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 including a second pair of clamping jaws, width 200 mm Jaw width 200 mm Base body, type LC 160/200 (for jaw widths of 160 and 200) Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Itsdpfozfimuex Ap Den Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition optional: Clamping jaws, width 160 mm, height 50 mm, new € 200.00 Aluminum jaws, width 200, height 60 mm, height 80 mm, new € 200.00 Worm gear € 100.00

Condition: good (used), Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Manufacturer: Bernstein, Inductive proximity switch -Type: M30AS/010-LSD -Number: 5x sensor available -Price: per piece Ijdpfx Aeuypyfjp Dotn -Dimensions: 115/55/H36 mm -Weight: 0.3 kg/piece

Condition: ready for operation (used), machine/vehicle number: XLRAE55GF0L350661, mileage: 161,802 km, power: 163 kW (221.62 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 11,290 kg, Year of construction: 2009, For sale is a used vacuum truck/vacuum vehicle, ideally suited for construction sites, tunnel construction, sewer cleaning, or industrial vacuuming applications. Vehicle details: Vehicle type: Vacuum truck Superstructure: Cylindrical tank with pump and suction system Application area: Tunnel construction, construction site, industry Condition: Used, fully functional Robust design for heavy-duty applications Ijdpfozcvvlox Ap Djtn Suction and emptying system included

Condition: used, Year of construction: 1985, machine/vehicle number: 324-016, filling valves: 24 capacity / hour ca.: 4500 working direction: left-right filling system: vacuum filling Iedpfx Aoz S Rd Hjp Djtn Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale Höhenverstellung 1,80 Breit, 1,80 Tief, 2,50 Höhe

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Iodsflpmqepfx Ap Djtn ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: good (used), Year of construction: 1975, turning length 1000 mm turning diameter over bed 430 mm turning diameter over slide rest 235 mm spindle turning speed range 11.2 - 2.000 U/min spindle bore 56.0 mm morse taper 4 MK quill stroke 135 mm bed width 333 mm spindle taper DIN 55022 Gr. 6 total power requirement 7.75 kW weight of the machine ca. 1950 kg From a maintenance workshop Good condition (!!) Features: - Heavy-duty, robust conventional lead/feed screw machine - 3-jaw chuck, Ø 250 mm, including replacement jaws - "RSF Elektronik" digital display Type Z735 - MULTIFIX tool holder, with 5 inserts - "FINN SAFETY" foldable chuck guard Type SPS 400 - Sliding tailstock * Includes RÖHM rotating center point - Freely adjustable machine lamp Itodpoz I Uckefx Ap Dsn - 1x chuck key - Chip guard - Sliding bed stop - Coolant system with drip pan

Condition: excellent (used), functionality: fully functional, For sale is a Keyence IV2-G500CA vision sensor, color version, from the high-performance IV2 series by Keyence. The device is in excellent optical and technical condition – tested, clean, and free of damage. The IV2-G500CA is a compact color vision sensor with integrated illumination, ideal for use in industrial image processing, quality control, and automation applications. Technical specifications: Model: IV2-G500CA Type: Color camera / vision sensor Manufacturer: Keyence Corporation (Japan) Series: IV2 Series Compact design with integrated lens and illumination CE and KC certified Connection via Keyence IV2 connection cable (not included) Scope of delivery: Itsdpsx Hyt Rsfx Ap Don 1× Keyence IV2-G500CA sensor head (without controller, cable, or additional accessories) Note: A compatible IV2 controller (e.g., IV2-500C or IV2-500MA) and a connection cable are required for operation. The device offered here is the sensor head only, not a complete system.

Condition: used, mileage: 206,700 km, power: 205 kW (278.72 HP), first registration: 08/2005, fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 6x2, wheelbase: 5,550 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 9,080 mm, total width: 2,480 mm, Year of construction: 2005, Equipment: ABS, air conditioning, electric window regulation, = Additional Options and Accessories = - 6x2 - Digital tachograph - Lift axle - Air suspension - PTO - Radio/CD player - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Axle Configuration Tire size: 315/80 R 22.5 Front axle: Steered; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle 1: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Isdpfxjz Rmzlo Ap Djtn Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Air suspension Weights Unladen weight: 15,040 kg Payload: 11,960 kg GVWR: 27,000 kg Condition Damage: none

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA Itjdezd Uh Iepfx Ap Djn The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Mazak Yamazaki 7780002000 B-02 Power Unit Itedpez St Tkefx Ap Don

Condition: good (used), Pressure shoe for Weinig planer and moulder Iodsyryzkepfx Ap Dstn

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Itjdpfxofz Ax So Ap Don ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Inductive sensor, electronics sensor -High temperature resistant: 230 °C -Cable length: 10 m -Manufacturer designation: Cable socket 10 m -Type: VK A0 69 41 -Number: 16x available -Price: per piece -Weight: 250 g Itsdpfxjd Tvufs Ap Den