Used Embossing Calender for sale (195)

Condition: good (used), Label letterpress printing machine Iwasaki, machine no. 1499, 3 colors, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, in good condition, immediately available. 3 machines available. Working width: 21 cm and 18 cm. Upon request, we are happy to inform you about additional machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Kdjdpfx Aoiphikob Tsh

Condition: excellent (used), Year of construction: 2015, operating hours: 50 h, functionality: fully functional, machine/vehicle number: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. The machine has been tested but was not put into production. It has operated for 50 hours. It is designed for the forming of cold-rolled sections, either open or closed, which are laser-welded. The input material for profile production consists of coils made of black or galvanized steel. Component parts (serial numbers in accordance with technical documentation): 1 - Soprem H1250/D/1700ZR decoiler, serial no.: 20140388/1, year of manufacture: 2014 2 - Soprem CH-2540 strip end welder, serial no.: 20140388/2, year of manufacture: 2014 3 - Dreistern RS616 multi-roll forming machine, serial no.: 15773, year of manufacture: 2015 - base frame, serial no.: N/A, year of manufacture: N/A - P60/80/90 gearbox unit, serial no.: N/A, year of manufacture: N/A - servo drive, serial no.: N/A, year of manufacture: N/A - Dreistern P60 forming, embossing, and perforating stands, serial no.: N/A, year of manufacture: N/A 3 x Dreistern RC1500, RC1501, RC1502 roll forming tools, serial no.: N/A, year of manufacture: N/A 4 - Trumpf TruLaser Cell 1100 laser, serial no.: S1200C0090, year of manufacture: 2014 Kedpfoxz Tuuox Ab Tsdh 5 - Dreistern TS214.10 cut-off machine, serial no.: 15122, year of manufacture: 2015 - Dreistern S 200.10 circular saw, serial no.: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system

Condition: used, Year of construction: 2006, Laminating machine TPM Katana 106 Year of manufacture 2006, approx. 36,000 operating hours For thermal and wet lamination Technical details and equipment: Max. sheet format: 106 x 165 cm Min. sheet format: 44 x 63 cm Feeder: Mabeg Extras: De-powdering and brushing device Laminating unit with drying drum and separate laminating calender. Large counterpressure roller for increased laminating pressure, 2-stage motor hydraulics Kdjdjxdhq Ajpfx Ab Toh Hot water heated cylinders (2 separate temperature control devices) 2-stage air jet drying (separately controllable) Sheet separator with flying knife (cross cutter) and short cut for OPP film Stacker with sheet deformation and stop rollers Central control and operation (Siemens control system / with Profibus) The system has been regularly serviced by the manufacturer and is fully functional.

Condition: good (used), approx. 16,000 pieces, Euro stacking container with 1 side to fold up, UTZ, 600x400x270mm, blue - second-hand - : Price per unit ex location (net): Kjdpfx Ajuw Uafjb Tedh Minimum purchase 6 pallets (min. 168 crates): only 5.-€ (net)! for truck purchase 33 pallets a (approx. 1,188 pieces): only 4.- € (net) for complete purchase: only € 3.25 (net)! One narrow side can be folded up or pushed back, similar to a garage door! Manufacturer: UTZ Type: Eurotec Year of manufacture: unknown Dimensions: L 600x W 400x H 270mm Dimensions inside: approx. L 57cm x W 36cm H 24cm Own weight: 3,62kg Reinforced floor, ribbed, suitable for conveyor technology Height incl. pallet 7 crates stacked high: 1.93m - 8 high approx. 2.18m high / 9 high approx. 2.42m high Approx. new price: 20.-€ (net) Condition: good, with embossed Weltbild logo Available: immediately, partial quantities later Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: excellent (used), EROWA System Plus ER-003467 Holder straight 15 x 15 x 37 Hardened steel, ground, profile for 15mm, embossing 230 pcs. Kodpfx Asw E Hgheb Tedh

Condition: ready for operation (used), Loop stitching heads for calender hooks Kedpfxjir A Hpe Ab Tsdh

Condition: new, Laminator 380 Plus - Automatic feeder with suction head - Infeed stacker - Automatic sheet separator - Film rewinding device (including cutting and rewinding knife) - Chrome-plated laminating roller - Touch screen - Anti curling system - Cooling fans for cooling after calendering - Stamping system including rewinder for waste foil - Hydraulic pressure of laminating roller Technical features: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 - 42 μm Film spindle axis: Ø75 mm Maximum film roll diameter: Ø340 mm Material weight: Digital printing paper: 135 - 350 g/m² (135 - 350 g/m²) Other paper: 157 - 350 g/m² (157 - 350 g/m²) Maximum format: 390 x 520 mm Kdjdjr Axv Hjpfx Ab Tjh Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Upper lamination roll diameter: Ø120 mm (chrome-plated and polished) Lower lamination roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC - 50 Hz Weight: 305 kg Dimensions (length x width x height): 1730 x 800 x 1480 mm

Year of construction: 1999, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 with a large number of type wheels, e.g: 563 / 610 697 - 2DP. / 635 564 / 667 610 / 16.. / 634 631 / 169 / 4,3 562 / 697 632 / 697 561 / 695 691-24P / 633 564 / 667 610-16P / 634 631 / 691 / 4,3 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Kdodjwvtqnjpfx Ab Tsh Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa

Condition: ready for operation (used), functionality: fully functional, The TSI Turroques Serge Industrie embosser offers a reliable solution for the continuous shaping of semi-firm food products. It is designed for workshops seeking a stable operating rate, consistent shaping, and controlled visual quality. Thanks to its robust food-grade stainless steel construction, it is ideally suited for environments that adhere to strict hygiene standards. Additionally, its mechanical architecture supports prolonged use, maintaining high productivity without performance loss over multiple cycles. The machine also ensures shape consistency, enhancing the final product’s appearance. This regularity simplifies subsequent cooking, packaging, or presentation processes, as each piece maintains a uniform size. Furthermore, reduced variation helps minimize material waste and weight discrepancies, positively impacting the overall profitability of the production line. As a result, the embosser optimizes process stability and directly contributes to production efficiency. Its design allows for straightforward integration into existing production lines, either upstream or downstream of other equipment such as fillers, conveyors, or packaging systems. This flexibility enables adaptation to different formats, textures, or recipes without major modifications. Easy access to cleaning areas reduces maintenance time and minimizes production downtime. Ultimately, the embosser quickly becomes a strategic asset for workshops aiming to improve process consistency while offering simple and intuitive daily operation. Technical specifications: Height: 1700 mm Width: 600 mm Length: 2340 mm Kdsdpfxjxrtpae Ab Tsh Year of manufacture: 2021 Cylinder diameter: 95 mm Registration: 235EM

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² Kdjdpjwh Tq Sjfx Ab Teh • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm Kdjdet Hw Dwopfx Ab Tsh table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Kjdpou Ttf Njfx Ab Tsdh Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: used, Press system : Continuous / Calender Major suppliers : Bison / Berstorff Design capacity : 160 m³/day Capacity achieved approx. : 200 m³/day Effective working time : 23 h/day Reference thickness : 3,2 mm Max. gross board width : 2500 mm Max. net board length : 2440 mm Max. net board width : Unlimit Kdedpfxjul H Nme Ab Teh Min. net board width : 1220 mm (splitting) Min. board thickness : 2,0 mm Max. board thickness : 10 mm Electric system : 380 V, 50 Hz Year of manufacture : 1985 Major upgrades : 2007-2009, 2016 Operated until : May 2018

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Kdodpfx Aovptbusb Tsh Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: new, pressure 34,0 kN Kdodpfxjfv Avys Ab Teh stroke 40 mm throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Kdsdpfxsfv Avvj Ab Tsh Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or Kjdpet E Nthjfx Ab Todh the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Year of construction: 1994, condition: good (used), machine/vehicle number: 25286, Built in 1994 Equipment: embossing press: • case magazine with case bending device DBA (without feeding conveyor) • foil feeder with two pairs of foil feeding rollers • electric counter • delivery conveyor to the right Ksdpfx Asd R Saqob Tedh

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Kdodsv T T N Hopfx Ab Tsh Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, total height: 4,300 mm, ram adjustment: 100 mm, installation height: 500 mm, table height: 1,000 mm, total width: 2,200 mm, table length: 1,400 mm, pressing force: 200 t, control cabinet width: 2,000 mm, stroke length: 160 mm, clearance between the columns: 1,450 mm, working width: 1,100 mm, distance between side stands: 400 mm, overall weight: 27,000 kg, height adjustment type: electric, space requirement height: 4,500 mm, space requirement length: 2,200 mm, space requirement width: 1,800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolyzers. Kdjdpfxjt Nf Age Ab Tsh hydrogen electrolyzers. The press is also suitable for (smooth) fineblanking, stroke rate 1 - 70 /min. Eccentric loads are also possible without any problems thanks to 4 connecting rod rams. It is also not possible for the press to jam. The press is completely overhauled and supplied with a new Siemens S7 control system.

Year of construction: 2000, condition: good (used), Equipment: Unwind Guide system 1 Hot foil (or embossing) unit 1 Flexo unit 6 offset waterless printing units UV dryers 1 Hot foil (or embossing) unit 1 Embossing unit 1 Flat bed die cutting unit 1 Varnish unit - UV/IR Rewind Kjdpjumwn Aefx Ab Tjdh

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JV3D5274-099, For sale is a digital finishing system with hot stamping foil module in very good condition including spare parts dispenser. It has been completely overhauled and is ready for use. Technical data: Make: Mgi Jetvarnish JV3D5274 incl. IFoil module (from Körapackmat) Year of manufacture: iFoil 2014 SN: 3649 / Jetvarnsih 2014 SN: JV3D5274-099 Digital single pass inkjet printing with UV varnish using 8 piezo print heads from Konica Minolta type IHM 1024i (2 x 512 nozzles per head) Mechanical sheet transport with automatic sheet feed on the middle/left or right with ultrasonic Kdjdpfoqfddbsx Ab Tsh double sheet detection. Feeder and stacker with a capacity of 4000 sheets at 135gr/m² (sheet stack up to 60cm high) Pixel-accurate sheet detection with laser keyence sensors for varnish form positioning Dual camera system for print mark detection for print data alignment Flat sheet guide with conveyor belt over a vacuum table that can be adjusted to the sheet width using blinds Air-cooled LED pre-drying directly behind the print head bar Infrared unit for surface varnish application Air-cooled high power UV drying from market leader IST-Metz Connected foiling unit for hot foil embossing including sleeking option. Heating roller newly installed Dec 2019 (ran approx. 2 km since then) Intuitive production software with an editor for pixel-accurate editing of the varnish layer.

Condition: used, empty load weight: 6,722 kg, maximum load weight: 32,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,700 mm, Year of construction: 2018, Equipment: ABS, Tare weight: 6722kg, GVW: 39000kg, Loading area (L W H): 13,620 mm x 2,480 mm x 2,730 mmTyre size: 385/65 R22.5, Loading area volume: 92 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Electronic Brake System EBS, Toolbox 2x, Spare wheel carrier double, Ferry lashings, Bolted chassis, 1x15 and 2x7 pin plug, Antispray, 400mm wear plate to reinforce last floor section (crash plate). Tarpaulin quick tensioner, front . 1 additional bulkhead reinforcement made of plywood, 1,250 mm high. lashing rings 5/15 pairs of traction each lug. 2 units of LED reversing lights. one-piece stainless steel lamp panel with "SCHMITZ"-embossed., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Kodpfx Abjxc Ai Do Tsdh

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: Kdodpfxer Nv Ice Ab Toh max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station - Cooling station after sealing - Index after sealing - Embossing station -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing Ksdeilqvrepfx Ab Tjdh - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils