Used Embossing Calender for sale (185)

Year of construction: 2002, condition: used, Working widths 1800 mm roll surface width 2000 mm Number of rollers 2 St./ea Upper roll Gravur oder Stahl dia diameter of upper rolls 210 mm Heating - upper roll Elektro Lower roll Gummiert dia diameter of lower rolls 300 mm Roller covering - soft rubber 95 °Sh weight 2 t dimensions of the machine ca. 3,0 x 1,5 x 1,8 m Embossing Calender with exchangeable top roll, Gjlst An E Rshcdw Aokd The following spare rollers are included with the machine: • 1 x steel roll, chrome plated • 3 x engraving rolls, various designs • 1 x spare bottom roll - rubber coated On the outlet side there is a small batch - rising batch winder ATTENION: the electrical control unit is defective, still needs to be replaced, therefore SPECIAL PRICE for self-repair

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll to roll (100m/min). sheet material can also be processed, separate insertion tables are included exchange cassette (structure fine linen) The machine is in a very good condition, few operating hours Gkslshr Rlyshcdw Ajd machine book / instruction manual

Year of construction: 2017, operating hours: 10,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 2017344, Calender used for: transfer printing, direct inks reactivation, thermosetting – heatsetting, heatsetting of 'crush' effect. Gelhcsxb A Tyjdw Askd

Year of construction: 2021, condition: good (used), Die cutting and embossing machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Sheet size min.: 300 x 350 mm Sheet size max.: 760 x 1,060 mm Maximum machine speed: 8,000 sheets/h Maximum die cutting pressure: 2.6 MN / 260 t Materials and pile height (incl. pallet) Paper min.: 90 g/m² Gslhovxu Smecdw Aokd Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Maximum feeder pile weight: 1,500 kg Without blanking station Without MasterSet

Condition: used, Year of construction: 1973, Continuously overhauled/upgraded Gelhcjxcnf Dodw Aekd

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Gkelhcdwjtrpiie Aod Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 14-10-11, Thermopress calender for sublimation Cylinder width (mm) 1800 (71") Gslsxnklqehcdw Aokd Maximum working width (mm) 1600 (63") Mechanical speed (m/min.) (inch/min.) 0,1 ÷ 1,7 Total installed power (Kw) 10,5 Average consumption (Kw) 6,5 Maximum current absorption (Amp.) In 400 V= 14,5 A In 230 V= 25 A Cable section for connection (mm²) 400 V = 4 mm² 230 V = 10 mm² Printing roller electric motor power (Kw) 0,37 Printing roller heating element power (Kw) 9 Fabric winding electric motor power (Kw) 0,55 Transformers (Kw) 0,2+0,1 Net weight of machine body (Kg) 800

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-Roll Mechanical Plate Rolling Machine. Available for immediate delivery unless previously sold. Model: FX4.90.1330. Double pre-bending. Working width: 1330 mm. Top and bottom roll diameter: 90 mm. Lateral roll diameter: 95 mm. Plate thickness capacity: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Top and bottom rolls are motorized with identical power output. Side rolls are motorized for vertical movement (up/down). Front opening for the top roll. Rolls are induction hardened to HRC 55/60, 2 mm depth. Special bearings for the side rolls. External lever for roll tilt adjustment. Sheet clamping with bearing-equipped device. 2-pedal foot control. Electrical cabinet compliant with CE regulations. Millimeter scale for sheet clamping readout. 4-ROLL MECHANICAL PLATE ROLLING MACHINE with complete double pre-bending and front-release system. The top roll is stationary, while the lifting/lowering movement is applied to the side and lower rolls. Sheet clamping is simple: after inserting the sheet between the top and bottom rolls, the bottom roll lifts to secure the sheet. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Machine includes: - Front conical bending device on the top roll. - 2 digital readouts for side roll positions. - Roll grinding/turning after hardening treatment. Gkelhefh Skpjcdw Aod - Roll hardening.

Condition: good (used), Year of construction: 1995, Calender with 3 rollers Fasti main features: Length 1860 Sheet metal thickness max. mm. 0,75 Upper roller diameter mm. 40 Gjlhof Slq Sjcdw Ajkd Several LED ceiling light templates

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Gkjlhcdsw Tc R Row Ajd

Condition: used, Year of construction: 1971, Documented modifications / upgrades: Year Modification / Upgrade 1971 Installation of four-roll calender 18" × 54" (Comerio) 1971 Safety enhancements for CTI – SQ 1986 Manual gauge monitoring system 1990 Width measuring unit 1993 Upgrade to eliminate internal blistering 1994 Modification of calender for single turn 2001 Upgrade MMI-Gum-Calender Y2000 2009 Cassette winders (2) incl. control cabinets 2009 Material width measuring system (SQ1) 2010 Overhaul gum calender (SQ-Cal.) 2012 Control system adaptation feed extruder SQ-calender 2012 Mechanical upgrade SQ-calender 2012 Gauge measurement system SQ-calender 2013 Overhaul of cooling line for gum calender (SQ-Cal.) 2014 Optimization of spool winder at SQ-calender 2018 New calender rolls Control system: Various modernizations (MMI 2001, control upgrade 2012) Gkslhcdexf Ap Nsw Aod Technical data: Roll diameter 18", roll length 54" Maintenance / condition: Regular overhauls and modernizations documented 1971–2018 Accessories / options: Cassette winders, width measuring unit, cooling line, spool winder, gauge & width measuring systems

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring Gslhcdwehrakvs Askd - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. Gkslhcsvt Rpqjdw Ajd You are welcome to view the machine in our company by prior appointment.

Condition: excellent (used), We offer you: Golew Ra Hqshcdw Askd Embossing device for achieving form-fit connections Manufacturer: HWR Type: SOLIDStamp Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Year of construction: 1984, condition: used, Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press Gkelhcdwed Hp Tzs Aod - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Condition: ready for operation (used), A fully automatic hot stamping and punching machine Baier Maschinenfabrik is available. Max. material width: 250mm, max. punching width: 240mm, heating power: 2200W, stamping force: 100kN. On-site inspection is possible. Golhowlihzscdw Ajkd

Condition: used, Meyer Press Type AHV-CPL 8050 Gkolhcdwjbq A A Ne Aod Machine number: 697102

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Gkelov Uraajhcdw Aod Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Gkelewtw E Dshcdw Aod Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2006, condition: used, Printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, die cutter, pneumatic die cutter -Manufacturer: Stommel 6 Voos, embossing press, rail stamping machine on a solid base -Type: SV700/6/PE/EF -Band width: 13 mm, convertible -Individual components: see photos -Accessories: without other accessories -Dimensions: 820/520/H1680 mm -Weight: approx. 154 kg Golskyy Ufjhcdw Aokd

Year of construction: 1985, condition: ready for operation (used), Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible. Gkolsrm S Exjhcdw Aod

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Gkelhcsh Uhqyodw Ajd Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Online-Video-Inspection by Skype-Video Gslhcdjh Ax N Nsw Ajkd We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1965, condition: ready for operation (used), Suitable for the production of rigid PVC films with a minimum plasticizer content of 3%, number of rollers: 5, with documentation, retrofit 2003 and 2017. Gkelhcdsquu Ttsw Aed

Condition: used, Year of construction: 1967, machine/vehicle number: 3659, Kalenderstanze - Calender Punch Machine Renz Super 520Year 1967 - Serial-No. 3659 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gelheh Axcyjcdw Aokd