Used Ergometrics 900 for sale (4,516)

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Nsdpfx Afoxv D Dcezskt Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 25062/2, Year of construction: 2008, operating hours: 9,628 h, load capacity: 8,000 kg, lifting height: 4,250 mm, load center: 900 mm, fuel type: diesel, mast type: triplex, construction height: 2,750 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork length: 2,000 mm, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), Equipment: UVV, cabin, lighting, sideshift, Triplex mast with full free lift, construction height: 2,750 mm, lift height: 4,250 mm, load capacity: 8,000 kg at a load center of 900 mm, side shifter, forks L: 2,000 mm, work lights front and rear, fully enclosed cab with heating, Deutz diesel engine, manual transmission with mono-pedal control, 6 pneumatic tires, operating manual included. Nsdsx Sta Iopfx Afzskt Technical condition at sale: Forklift has been technically overhauled! Major maintenance newly performed! UVV safety inspection passed without defects! Delivery: In flawless condition! 20 years of professional experience! VIEWING AND TEST DRIVE: Available any time during business hours by appointment: Monday to Friday from 8:00 am to 6:00 pm. Saturday from 8:00 am to 1:00 pm. TRANSPORT: Low-loader or tarpaulin truck available at a reasonable price. Dealer’s note: Triplex mast with full free lift, construction height: 2,750 mm, lift height: 4,250 mm, load capacity: 8,000 kg at load center 900 mm, side shifter, forks L: 2,000 mm, work lights front and rear, fully enclosed cab with heating, Deutz diesel engine, manual transmission with mono-pedal, 6 pneumatic tires, operating manual included. Fork positioner available on request (additional cost) Technical condition at sale: Forklift has been technically overhauled! Major maintenance newly performed! UVV safety inspection passed without defects! Delivery: In flawless condition! 20 years of professional experience!

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 5,000 rpm, For sale: Mikron UMS 710-900 machining center The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical data: Nkjdpfx Afett Acgozjt x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: HEIDENHAIN TNC 426 Table size: 1200 x 600 mm Max. table load: 500 kg Spindle mount: SK 40 with ring groove Spindle speed range: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total connected load: 15 kW Machine weight approx.: 5.0 t Floor space required approx.: 2.40 x 3.40 x 2.30 m Chip tray No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids for the machine available on request. Loading and transport can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options...

Condition: used, This listing is for 1 of 2 Morgan Mini Monitor Series 900 Geiger Counter Nksdpfexzgz Iex Afzet Over the years Mini Monitor 900s have earned an excellent reputation for reliability, performance, versatility, ease of use and value for money. The 900 series continues to be a popular choice in education, research, medicine, industry and amongst environmentalists and enthusiasts.

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Njdpsl Dvx Eofx Afzskt Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: repair required (used), Year of construction: 2007, functionality: not functional, type of input current: three-phase, We are offering this Knuth X-Mill 900 CNC portal milling machine, year of manufacture 2007, which is in need of repair. The Z-axis requires repair. Machine type: X-MILL 900 CNC Nodpfx Ajx Stfqofzekt Serial number: 141887 Year of manufacture: 2007 Total power: 12.4 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, ARJES 950 Metallshafts ARJES 950 Starshafts ( wood, waste, tyres ) Arjes 950 TITAN Concret Shafts ( stronger Version ) WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. We manufacture exclusively in Germany using the finest materials, bearing the "MADE IN GERMANY" seal of quality. We impress with our long service life and easy repair. Delivery time by arrangement WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness. Nsdpfx Asiyy I Esfzskt

Condition: good (used), Year of construction: 2013, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, wet-dry vacuum cleaners, liquid and chip vacuum cleaners, water vacuum cleaners, wet vacuum cleaners -Manufacturer: Numatic, industrial vacuum cleaner type WVD 900-2 Njdpfoiaqmfex Afzokt -Connection: 230 volts -Power: 2400 W -Number: 1x industrial vacuum cleaners available -Dimensions: 740/485/H880 mm -Weight: 23 kg

Condition: good (used), Code: 0062 Brand: KUPER Model: FW / J 900 Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Nodpfsx I Dwpox Afzokt Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185

Condition: new, Year of construction: 2025, Fully equipped lathe with a lead screw and a feed shaft. Machine features Precise design 2 axes digital readout Large spindle bore – Ø 36 mm Heavily ribbed prism bed made of gray iron Inductively hardened and precisely ground bed guides Ensured accuracy of spindle tip better than 0.009 mm Accuracy of lathe chuck speed better than 0.04 mm Left/right switch on the control panel With a lead screw for threading or automatic longitudinal feed Lead screw and feed shafts in two sintered bearings Automatic longitudinal and transverse feeds Lead screw and feed shaft guard Knobs by the slides with adjustable 0.04/0.02 precise scaling Included by default set of change gears for threading Emergency stop button Smooth and efficient drive of excellent spindle speed adjustment VARIO model equipped with an inverter for smooth spindle speed adjustment! Digital speed indicator By default comes with a solid steel base Technical data Swing over bed 310 mm Swing over cross slide 190 mm Centre width 900 mm Bed width 180 mm Spindle bore Nedpfjric Idjx Afzekt 38 mm Spindle tip MK5 Spindle speed 80 – 2000 rpm (adjustment in 2 ranges) Metric thread (18) 0.2 – 3.5 mm/turn Inch thread (21) 56 – 8 TPI Longitudinal feed 0.085 – 0.832 mm/turn Transverse feed 0.01 – 0.1 mm/turn Maximum upper slide travel 65 mm Maximum transverse support travel 210 mm Maximum longitudinal support travel 650 mm Tailstock spindle travel 100 mm Tailstock quill diameter 38 mm Tailstock quill taper MK3 Motor power 1.5 kW / 230V Dimensions 1520×675×1320 mm Weight 295 kg

Condition: used, mileage: 54,780 km, power: 81 kW (110.13 HP), first registration: 06/1993, fuel type: diesel, color: blue, Equipment: all wheel drive, tail-lift, * Our internal no.: 1127 * MB Unimog 417/20 * First registered: France - Utility company, in Germany since 2021 and inspected by MB. * Tail lift * Winch - Manufacturer: Werner u. Co. Maschinenfabrik GmbH Seilwindenbau * Very good tires * Battery replaced new at MB, 05/2025 * Year of manufacture: 1992 - First registration: 06/1993 * NEW trailer couplings (2 pieces) included loose. * Driver's door trim included loose, as well as a cover for the cockpit. * etc. * Chassis: clean Nodpfx Aowvd D Eefzskt * Engine: clean / dry * Very good overall condition * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Condition: used, mileage: 54,780 km, power: 81 kW (110.13 HP), first registration: 06/1993, fuel type: diesel, color: blue, Equipment: all wheel drive, tail-lift, * Our internal number: 1127 * PICK UP PRICE – FINAL * MB Unimog 417/20 * First registered in: France – electric utility provider, in Germany since 2021 and fully inspected by MB. Nkjdpswu N Elofx Afzst * Tail lift * Winch – Manufacturer: Werner u. Co. Maschinenfabrik GmbH Seilwindenbau * Very good tires * Battery replaced new by MB in 05/2025 * Year of manufacture: 1992 – First registration 06/1993 * NEW trailer hitches (2 units) included, unattached * Driver’s door trim unattached, cover for cockpit also included unattached * etc. * Chassis: clean * Engine: clean/dry * Very good overall condition * All information without guarantee * We reserve the right to prior sale * Please refer to our terms and conditions

Condition: good (used), Year of construction: 2010, • Brand: Erdwich • Type: M700/1-900 • Year of construction: 2010 • Machinenumber: 2036 • Engine power: 22,0 kW • Single axle Nkjdpfjvmzkxsx Afzet • Hydraulic slide The shredder has been completely serviced at our workshop and fitted with a new sieve bedholder. We currently have 2 sizes of sieves in stock. These sieves are suitable for reducing paper to 20 or 25 mm.

Condition: new, total height: 2,450 mm, overall weight: 1,700 kg, cutting width (max.): 800 mm, power: 22 kW (29.91 HP), number of blades: 2, Mebor board edgers are recognised by their strong and robust construction, giving reliability, high performance and low maintenance costs. VR machines can use up to 3 (5) moveable heads (blades) and are designed for both edging of boards and multi-ripping of cants. Mebor’s precision made frame ensures high precision of cutting and high quality of your products. Simple to highly automated versions are available. Nedsrpmmaopfx Afzskt

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 15,477 h, load capacity: 8,000 kg, lifting height: 6,450 mm, fuel type: gas, mast type: simplex, construction height: 4,580 mm, empty load weight: 14,420 kg, drive type: Treibgas, construction width: 1,870 mm, LPG Forklift Nkjdsxn U Iiepfx Afzot Load Center: 900 Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Cushion Front Tyre Size: 840x350-559, non-marking Rear Tyre Type: Superelastic Rear Tyre Size: 3.00-15, non-marking Description: In addition to this Linde model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts, and side loaders available in our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Attractive lease-purchase and financing options are always available. We are also happy to purchase your used vehicle directly, even if you are not buying one from us. Our owner, Mr. Peter Sawitzki, will gladly advise you in detail about this H80T900. P.S.: Our master forklift workshop specializes in repair, servicing, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to sell your vehicle on commission. Side shifter, fork positioner, Heater, full cabin, New engine at 14,377 operating hours

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, warehouse no.: 503576 manufacturer: ARBURG type: Allrounder 900 T 800-150 controller: year of construction: 2010 operation hours: 72154 h clamping force: 800 kN distance between tie-bars h x v: 900 x 900 mm Nksdpfx Ajx Eyz Eofzot min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 900 mm screw diameter: 25 mm swept volume: 54 ccm injection pressure: 2500 bar equipment included: screen text german air valve 1x machine with rotary index table machine incl. water flow regulator Anti vibration mounts Operation Data Acquisition measures of machine l x w x h: 3.8m x 1.85m x 2.15m total weight: 5000KG

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW Nkjdpfxegv Aa Io Afzjt - Machine Weight : 78.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm. Nkodpfxechb Sbe Afzst

Condition: ready for operation (used), Festo DGPL-32-900-PPV-A-KF-B linear actuator 161793 – 8 bar, used, in good condition, 100% functional, delivery as per photos. Nodpfx Aex Erl Njfzskt

Condition: ready for operation (used), Festo DGPL-32-900-PPV-A-KF-B linear actuator 161793 – 8 bar, used, in good condition, 100% functional, delivery scope as shown in the photos Nodpfxjx Ermao Afzjkt

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 25062/1, Year of construction: 2016, operating hours: 7,158 h, load capacity: 8,000 kg, lifting height: 4,450 mm, load center: 900 mm, fuel type: gas, mast type: mono, construction height: 3,550 mm, motor manufacturer: VW, gearing type: hydrostat, fork length: 2,400 mm, front tire type: superelastic tires (black), empty load weight: 14,130 kg, Equipment: UVV, air conditioning, cabin, seat heater, sideshift, Standard telemast, construction height: 3550 mm, lift height: 4450 mm, load capacity: 8000 kg at load center: 900 mm, double pallet clamp with sideshift, fork length: 2400 mm, road lighting compliant with StVZO, LED work lights front and rear, fully enclosed cab with heating and air conditioning, front and rear cameras, VW LPG engine, manual transmission, monopedal, 6x solid superelastic tires, operator's manual included. Njdex Rrv Eopfx Afzjkt Technical condition at sale: Forklift has been technically overhauled! Major maintenance just completed! UVV safety inspection passed flawlessly! Delivery: In immaculate condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: Available at any time by prior appointment during business hours: Monday to Friday from 8:00 am to 6:00 pm. Saturday from 8:00 am to 1:00 pm. TRANSPORT: Low loader or curtain-sided truck available at low cost.

Condition: good (used), machine/vehicle number: 2856, Year of construction: 1997, load capacity: 10,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,100 mm, total length: 4,910 mm, total width: 2,550 mm, operation weight: 17,600 kg, additional equipment features: Dual tread, Weight system, Warning triangle, Equipment: lighting, SveTruck 10-900 from Uniktruck Nkodpfxotu Nr Ae Afzot

Condition: used, Year of construction: 2008, operating hours: 18,866 h, Liebherr A 900 C ZW Litronic * Year of manufacture: 2008 * Operating hours: 18,866 h Nkjdpfx Afoxz Ihiszjt * Engine: 105 kW (143 hp) Good condition, immediately ready for use Leasing or financing options are available upon request. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale!

Year of construction: 2010, condition: good (used), Industrial PC cabinet Make KAISER+KRAFT PC-900 Nkjdpfx Aemqiz Rsfzjt Dimensions: L 900 mm W 700 H750 mm. weight ca.100 Kg.

Year of construction: 2026, condition: new, Fruit processing where you want! The Mobile MK Fruit Processing Unit can be installed and operated anywhere. For operate, only water, electricity and gas or diesel are needed - then the processing can begin. The processing machines can also be used separately by the Mobile MK fruit processing units independently. All machines are made of stainless steel. The vehicle body is made of aluminum and the box made of plastic. The unit is equipped with high-pressure cleaner, compressor and optional built on customer request with weatherproof pre-tent. Nkedpfx Afed Atf Sozjt - Capacity: 800 kg / hour - Weight: 3.5 tons (depends on the type and number of machines fitted) - Equipped with compressor and high pressure washer - Water, gas (or diesel), 10 KW of energy required for its operation - Unique tent system against weather conditions