Used Ess 240 M for sale (87,968)

Condition: used, Year of construction: 2008, Technical details: pressure: 6 t stroke: 1020 mm total power requirement: 3,5 kW Can only adjust between tips Njdjw Ng D Tjpfx Agzsdf *

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel exit is fully automatic and self-regulating. Nedjx Irw Djpfx Agzedf Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: used, GENERAL Heat exchange surface: 0.99 m² Outer diameter: 200 mm Inner diameter: 86 mm Total length: 2,120 mm Insulation: present Other: Pipe outer diameter approx. 10 mm Location: Bremen Nameplate: Condition: used Last application: pharmaceutical industry INSULATION Insulation jacket material: stainless steel SHELL SIDE Shell volume: 7 liters TUBE SIDE Tube volume: 3 liters Shell material: AISI316 (V4A) 1.4571 Number of tubes: 20 Max. permissible operating overpressure shell side: 6.0 bar Tube length: 1980 mm Tube diameter: 8 mm Max. permissible operating temperature tube side: 144 °C Max. permissible operating overpressure tube side: 7.0 bar Ndsdpfxjxqchvj Agzjf

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 Nedpfehabk Dox Agzodf -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Nedsvai R Tspfx Agzedf Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: as good as new (ex-display), The AHK M 1230 NC is a robust press brake from the renowned KNUTH brand, designed as a modern, cost-effective alternative to traditional CNC press brakes. This versatile machine is well-suited for operators who prefer working without complex CNC programming, featuring a user-friendly touchscreen interface for direct positioning of the back gauge along the X and R axes. The machine's high-precision steel construction and hydraulic design ensure excellent rigidity and durability, accommodating intricate bending sequences. With a pressure force of 30 tons and a bending length of 1,250 mm, it is ideal for processing various materials and contours. Noteworthy standard equipment includes the Weintek 7'' NC control, motorized back gauge, and light curtains, which enhance both safety and productivity. You can confidently order this reliable press brake online to elevate your sheet metal processing capabilities. Ndodpfx Aomf Tilsgzsf

Year of construction: 2012, condition: used, Used equipment Year of manufacture: 2012 Device for easy assembly of drawers Availability: short-term Location: Flörsheim Ndedox H U Nyopfx Agzef

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Ndedpfxex Irlze Agzjf Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: used, Used stainless steel clarifying filter press by Seitz Orion type OF 100/150. Press has 154 stainless steel filter plates with dimensions 1000 mm x 1000 mm and two end plates. Filtration surface approx 310 m2. Machine has hydraulic closure. Mounted on stainless steel frame. Includes feeding connections, manometers and local control panel. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Ndsdpjx Ni Aajfx Agzsf Plate Type: Clarifying Surface Area: 310 m2 Closure: Hydraulic

Condition: excellent (used), Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Manufacturer: Costacurta, Conveyor belt round wire link belt stainless steel 1 roll -Type: VICO FLEX -Width: 457 mm Nodpox Ewrbofx Agzedf -Length: 18.29 m -Height: 35 mm -Submission/Price: complete -Transport dimensions: 800/457/H630 mm -Weight: 75 kg

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HDS SUPER M Eco HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90/155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle Njdexbb A Hepfx Agzodf WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: new, The KNWP 50 M is a top-of-the-line manual workshop press designed for various applications in the Workshop Presses category, particularly in the Manual Workshop Press group. Built in Europe, this robust hydraulic press is ideal for assembly, straightening work, and testing workpieces in mechanical workshops, garages, and locksmiths. Its features include a manually operated hydraulic pump with both hand and foot control, a rigid machine frame made from a carefully machined weldment structure, and adjustable table height for enhanced versatility. The 2-step hydraulics allow you to switch between quick-stroke and work stroke effortlessly. This 50-ton press simplifies tasks such as the removal and installation of bearings and bolt pressing while ensuring safe and professional operations. The included material support and multi-function die enhance productivity, making it an essential tool for professionals. For further inquiries and to explore your options, request a quote today. Njdpfxjuyh Tws Agzsdf

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t Ndodpfx Asx H Iu Nsgzof

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lifting-tilting device Technical Data: Manufacturer: Presto Nodpfx Agex Iri Hjzedf Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput capacity at bulk weight: - 35 kg/m³: 1.3 t - 60 kg/m³: 1.7 t - 100 kg/m³: 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find a video on our website or YouTube channel. Viewings, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for an additional fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays from 08:00 to 13:00. Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: refurbished (used), Refurbished DKV III through-feed press with brake unit Optionally with original hydraulic motors or conversion to servo motors Options: - Chain threading - Traveling cross-cut saw Function: For pressing finger joints without stopping (in through-feed). The upper and lower plate chains generate feed force. Downstream brake plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite relatively slow feed rate - Absolutely no vertical tine offset of the finger joints Technology: Heavy 2" plate chain, pneumatically raised and lowered Floating brake elements Nedpfov T Aqysx Agzsdf Pressing force measurement via contact pressure gauge Electric height adjustment Maximum pressing force adjustable and dependent on feed speed and wood cross-section: 4500 daN at 32 m/min 2200 daN at 70 m/min Adjustable feed speed: 10-70 m/min Drive power: Feed unit adjustment: 1 kW Brake adjustment: 1 kW Hydraulic motors: 45 kW Technical specifications: Log width: 90 - 180 mm Log thickness: 20 - 80 mm Thickness to width ratio: 6:10 Maximum wood cross-section with 15/16.5 mm tines: 90 cm²

Year of construction: 1996, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Nodpevam Hlsfx Agzedf -Manufacturer: Piller, double radial fan. -Type: 2 M 10 1800 -Engine power: 15 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 160 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 900/1150/H1275 mm -Weight: 367 kg

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture 2008 - Very good condition, rarely used * Type KT-MB-28/15-240 * With automatic pin system and in-line turner * 2 tables with automatic Vario-Pin system * With Teflon coating for pre-glued foil * Foil laying system for pin table (pre-glued foil) * Heating plate size: 2800 x 1500mm * Max. workpiece size: 2,540 x 1,250mm * Membrane: yes * Cutting station * Foil carousel storage, 3.2m height with 14 suspension rods * PLC control Siemens S7 * Control unit for PLC SIEMENS TP 270 (Touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Max. chamber pressure: 6 bar * Max. press opening: 150mm Nedpfjxbcudjx Agzedf * 6 cylinders with Ø 125mm * Operating voltage: 400V 50/60Hz * Chamber height: 40/60mm * Max. pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar

Condition: new, The AHK M 2160 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brake category. This machine balances proven technology with modern safety standards, offering an inexpensive NC alternative to traditional CNC press brakes. With its robust, stress-relieved welded steel construction and precise upper beam positioning thanks to a torsion shaft, it ensures top performance for bending operations. The user-friendly touchscreen interface allows operators to directly position the back gauge in the X and R axes, or utilize stored bending sequences for automatic operation. Each machine features a motorized back gauge and supports extensive bending tools, significantly reducing tool-changing times. Safety is paramount, with features compliant with the latest CE regulations. Whether you’re working on recurring materials or complex contours, the AHK M 2160 NC excels in productivity and precision. Order online today to enhance your sheet metal processing capabilities with this reliable press brake. Nsdpfx Ageuyin Njzsdf

Condition: used, Insulated Stainless Steel Tanks – 60 m³ (304L & 316L) Manufacturer Not specified (industrial-grade – food-safe compliant) Type Vertical stainless steel storage tanks with complete thermal insulation. Industrial Applications - Hot water or thermal fluid storage - Food and beverage processing - Chemical and cosmetics industries - Thermal management systems - Pharmaceutical manufacturing Main Technical Specifications - Unit capacity: 60,000 liters (60 m³) - Materials: - 1 tank in stainless steel 304L - 1 tank in stainless steel 316L - Dimensions: - Diameter: 3.40 m - Height: 7.00 m - Insulation: Full thermal insulation (calorifuge) - Previous use: Hot water - Compliance: Food-grade certified - Condition: Second-hand, sold as is (not loaded) - Location: Goussainville (95190), France Nodpfx Agjx A Itzjzodf - Transport: Loading and category 2 exceptional transport available - Availability: Immediate Machine Usage These 60 m³ insulated stainless steel tanks are designed for storage and temperature control of hot or heat-sensitive liquids in industrial or food-grade applications. Their insulation ensures efficient thermal retention and consistent process performance. Features / Differentiators - Dual stainless steel grades (304L & 316L) for optimal versatility and corrosion resistance. - Efficient thermal insulation minimizing heat loss. - Medium-size design suitable for space-limited facilities. - Clean usage history (hot water only), food-safe compliant. - Immediate availability with optional specialized transport management.

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt, belt conveyor, incline conveyor, incline conveyor -Conveyor belt: conveyor belt, housing VA -Speed: 10.6m/min -Conveyor belt width: 195 mm -Conveyor belt length: 2910 mm, dimensions see photo techn. drawing -Outlet height: 585 mm -Individual components: see photos -Total dimensions: 3190/620/H710 mm Nedjlw Azuepfx Agzedf -Weight: 330 kg

Condition: new, The KNWP 30 M is a reliable manual workshop press within the Workshop Presses category, ideal for various pressing tasks, including assembly, testing, and straightening workpieces. Made in Europe, this robust machine combines a rigid, machined weldment structure with a versatile hydraulic pump, which can be operated via both hand and foot controls. Its sophisticated two-step hydraulics allow for seamless transitions between quick-stroke and work stroke, while an automatic reset piston ensures efficient operation, adjustable via a throttle valve. The support table, easily adjustable in height, enhances usability and comes with a multi-function die for effective straightening of both flat materials and corrugation. Whether for straightening beams or material testing, the KNWP 30 M provides the power of a 30 t pressure force with a total piston stroke of 160 mm, making it a must-have in any mechanical workshop, garage, or locksmith's shop. For more information or to place your order, please request a quote today. Ndjdpfxjuyh Sgo Agzsf

Condition: used, Insulated Stainless Steel Tank – 120 m³ (304L & 316L) Manufacturer Not specified (industrial-grade – food-safe compliant) Ndodpfx Ajx A Irqogzjf Type Large-capacity vertical insulated stainless steel storage tanks Industrial Applications - Hot water storage - Food and beverage processing - Pharmaceutical industry - Thermal treatment systems - Chemical and cosmetic sectors Main Technical Specifications: - Unit capacity: 120,000 liters (120 m³) - Materials: - Tank 1: Stainless steel 304L - Tank 2: Stainless steel 316L - Insulation: Full thermal insulation (calorifuge) - Previous use: Hot water - Compliance: Food-grade compatible - Condition: Second-hand, excellent condition - Location: Goussainville (95190), France - Transport: Exceptional transport (category 2 or 3) available upon request Machine Usage High-capacity insulated stainless steel tanks suitable for thermal fluid storage in food-grade or industrial environments, enabling stable temperature management during processing. Features / Differentiators - Two grades of stainless steel (304L & 316L) for varied chemical or thermal resistance. - Advanced insulation reduces thermal losses. - Rare XXL 120 m³ volume. - Clean usage history (hot water only), food-safe certified. - Immediate availability with optional logistics for exceptional transport.

Condition: new, The AHK M 1230 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brakes category. This machine offers a modern, cost-effective NC alternative to traditional CNC press brakes, making it ideal for operators accustomed to manual programming. Featuring a high-precision, stress-relieved steel frame and hydraulic cylinders, the AHK M 1230 NC excels in handling complex bending sequences effortlessly. Enhanced safety features, including light curtains and a CE-compliant design, ensure operator protection while maintaining productivity. The NC control system, complete with a user-friendly touchscreen, allows for easy input of bending sequences, accommodating up to 500 programmable data sets. You can confidently handle a variety of materials and shapes thanks to Promecam tool mounts and an adjustable back gauge with motorized X and R axes. With features designed for ease of use and reliability, now is the perfect time to request a quote for the AHK M 1230 NC press brake, ensuring your workshop benefits from superior capabilities in sheet metal processing. Njdoqc S Naspfx Agzjdf

Condition: new, The KNWP 15 M is a reliable manual hydraulic workshop press designed for versatile applications within the Workshop Presses category and specifically under Manual Workshop Presses group. Engineered in Europe, this robust machine is ideal for general assembly, straightening tasks, and workpiece testing, ensuring professional usability in mechanical workshops, garages, and locksmiths. The KNWP 15 M supports a pressure force of 15 tons and features a total piston stroke of 160 mm, enabling efficient removal and installation of press-fit bearings, as well as straightening beams and shafts. Equipped with both hand and foot control, this press includes a rigid machine frame and an adjustable-height support table, making it easy to handle. You will appreciate the versatility of its multi-function die for straightening various materials. For your needs in power and precision, you can easily order online or request a quote. Experience the quality and utility that the KNWP 15 M offers today in the Workshop Presses category and Manual Workshop Press group. Nedponcdu Nofx Agzodf

Condition: as good as new (ex-display), The AHK M 1230 NC incl. AKAS – LC II M is a highly efficient press brake designed for sheet metal processing, offering a modern and cost-effective NC solution for bending tasks. This robust machine combines advanced technology with safety features, allowing for user-friendly operation without the need for CNC programming. Built from stress-relieved welded steel, the AHK M series provides a rigid frame and hydraulic system, which ensures precise upper beam positioning through a torsion shaft connected to the depth stops. Operators can easily manipulate the back gauge in the X- and R-axes via a touchscreen or access stored bending sequences for automatic operations. This model is ideal for producing workpieces with consistent materials and shapes, while its manual quick-action clamping system significantly reduces tool change times. Complimented by features such as an emergency stop switch and a reliable optical safety system, the AHK M 1230 NC press brake is engineered for high productivity and safety. For those looking for a superior press brake, request a quote today and enhance your sheet metal processing capabilities. Ndodpfxsv Rbv Ae Agzef