Used Extraction Using Briquette Press for sale (53,587)

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Ffodpjltrmusfx Afnju Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: ready for operation (used), Technical characteristics Ffodpfx Afjtpryyenou Power consumption of hydraulic power pack : 5.5 kW Production capacity depending on material, e.g. for a bulk weight of approx. 250 kg/m3 : 30 to 50 kg/h Briquette diameter : 50 mm 100-liter oil tank built in boiler construction Main cylinder, feed cylinder, gripper cylinder Holding clamp Electrical panel with PLC Temperature and oil level monitoring device, Hardened steel compression cylinder, Automatic briquette length adjustment system Connection for briquette discharge pipe. Insalled options : Bottom plate, screw extraction, silo unloader Hopper 1040 x 1040 mm Paddle level sensor Oil preheating Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Fodpfxjdzqmzo Afnefu Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: new, Year of construction: 2025, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 30-50 kg/hour. The raw material hopper is 1m3, and has an agitator on the bottom. The machine has an oil cooler for the continous work. Fedpfx Asf Hmi Eefnefu

Condition: used, Year of construction: 1996, Manufacturer: Bogma Model: M75 Year of manufacture: 1996 Capacity: 2700 - 3600 kg/h Complete briquette line. - Mooving flor - Screw conveyor - Screw conveyor - Screw conveyor - Feeding system for Bogama 2pc - Three Bogma (briquette press) - One Bogma for spereparts Ffedpfsh A S Ersx Afnju - Pipes for ready briquettes - All hydraulic - All electric, control - Walking platforms etc

Condition: good (used), Year of construction: 1986, Power: 400kN Size of bolster: 900 x 1.280 mm Size of ram: 900 x 1.2200 mm Fodpethdbnjfx Afnjfu Weight of mold: max. 7.000kg Power main motor: 7,5 kW Stroke: 1.000 mm - With movable bolster - Bolster can be swiveled Weight: app. 7.000kg

Condition: used, Name: Filter Press Manufacturer: MSE Type: KFP1000-90/60-25 Year built: 2011 Construction form: Side beam press Filter pressure:: 15 bar Press content: Approx. 1177 liters (expandable to 1766 liters) Cycle: Open Fedpfx Aermmp Iefnofu Filter area: Approx. 101 m2 (expandable to 152 m2) Plate size: 1000 x 1000 mm Number Plates: 60 (expandable to 90) Plate material: Polypropylene Plate Transport: Automatically Filter cloth washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Technical doc.: Yes Accessories: Drip trays, 25 replacement plates, control cabinet, hydraulic system, light curtain Condition: Second hand Price: On demand

Condition: used, Year of construction: 1996, Name: Used filter press Manufacturer: Netzsch Type: 1000 /110 Year built: 1996 Construction form: Side beam press Filter pressure: 15 bar Fodpfxovta Nae Afnjfu Press content: approx. 2509 Liters Cycle: Closed Filter area: Approx. 163 m2 Plate size: 1000 x 1000 mm Number plates: 100 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9.347 x W 2.245 x H 2.435 mm Empty weight: 11.800 kg Technical doc.: Yes Message: It will be available from January 2025 Accessories: A switch cabinet, a control cabinet, a hydraulic system, a light curtain, a filter cloth washing system and drip trays Condition: Second hand Price: On demand

Condition: used, Year of construction: 1991, Name: Used Filter Press Frame Manufacturer: Passavant Type: 1200 x 1200 mm Ffodew Aw Rlspfx Afnou Year built: 1991 Construction form: Bridge beam press Filter pressure: 15 bar Press content: Possible approx. 2200 liters m2 Cycle: Closed Filter area: Possible approx. 160 m2 Plate size: For 1200 x 1200 mm Number plates: Without plates, 66 plates fit with a cake thickness of 30mm Plate transport: Automatic Filter cloth washer: Yes Cake thickness: 30 Possible Dimensions: L 6.700 x W 1.800 (2.400) x H 2.250 + 500 mm Empty weight: Approx. 14000 kg Technical doc.: Yes Message: Without plates but with 66 carriages for hanging the filter plates Accessories: A light curtain, a filter cloth washing system Condition: Second hand Price: On demand

Condition: used, Year of construction: 2000, Name: Used Industrial Filter Press Manufacturer: Simex Sauer Type: SPK 80 Year built: 2000 Construction form: Side beam press Filter pressure: 16 bar Press content: Approx. 1.000 Liters Cycle: Closed Filter area: Approx. 80 m2 Ffodpfexa Dwqox Afnou Plate size: 800 x 800 mm Number plates: 78 Plate material: Polypropylene Plate transport: Manually Filter cloths: No Filter cloth washer: No Plate pack length: 4.400 mm Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 6.400 x W 1.400 x H 1.500 mm Empty weight: 6.000 kg Technical doc.: No Accessories: A control cabinet & a hydraulic system Condition: Second hand Price: On demand

Year of construction: 1989, condition: reconditioned (used), The filter press was revised and checked by our workshop in 2023. Name: Chamber filter press Manufacturer: Passavant Type: AX1200 Year built: 1989 / 2023 Construction form: Bridge beam press Filter pressure:: 15 bar Press content: Approx. 2200 liters Cycle: Closed Filter area: Approx. 155 m2 Plate size: 1200 x 1200 mm Number Plates: 62 Plate material: Polypropylene Plate Transport: Automatic Plate pack length: Approx. 4200 mm Cake thickness: 30 mm Dimensions: L 7600 x W 1600 x H 2250 mm Message: Workshop revised in 2023 Accessories: A control cabinet and a hydraulic system Condition: Used good Price: On demand Fjdpfx Asl Uvxkofnjfu

Condition: good (used), Year of construction: 1990, functionality: limited functionality, Name: Chamber filter press Manufacturer: Passavant Ffodpfeq Tab Asx Afnsu Type: AX 1200 Year built: 1990 Construction form: Bridge beam press Filter pressure:: 15 bar Press content: Approx. 1800 liters (expandable to 2500 liters) Cycle: Closed Filter area: Approx. 127 m2 (expandable to 175 m2) Plate size: 1200 x 1200 mm Number Plates: 51 (expandable to 70) Plate material: Polypropylene Plate Transport: Automatic Cake thickness: 30 mm Closing pressure: 360 bar Dimensions: L 8000 x W 1900 / 2500 x H 2300 + 600 mm Technical doc.: Yes Message: Available in mid-February 2024 Accessories: A hydraulic system, a light barrier, high pressure pump Condition: Second hand Price: On demand

Condition: used, Year of construction: 1984, Name: Used filter press Manufacturer: Netzsch Type: 800/32 Year built: 1984 Construction form: Side beam press Filter pressure: 15 bar Press content: Approx. 480 Liters Cycle: Closed Filter area: approx. 34 m2 Plate size: 800 x 800 mm Number plates: 32 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: No Plate pack length: approx. 2000 mm Fsdjw Rb Ehspfx Afnsfu Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4.500 x W 1.700 x H 2.000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light curtain & drip trays. Condition: Second hand Price: On demand

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Ffedpfjwa Rlkex Afnju Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. Fedonxkrbjpfx Afnsfu - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Ffedpfx Asvvk T Iefnju Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Ffjdpfxerhidmj Afnju Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: new, Compressor AIRCRAFT Airprofi 703/100 – used – Galvanised tank, incl. pressure regulator, Fodpfx Afox Sx E Aonjfu Year of manufacture 2018, unused, SPECIAL PRICE instead of promo price 1,699,-- ----- Technical Data ----- Tank capacity: 100 litres, Max. air displacement: 650 litres, Max. pressure: 10 bar, Motor: 4 kW, Speed: 950 rpm, Sound pressure level: 93 dB - new demonstration unit -

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231209, Item Description: Used LNS Express 220 Bar Feeder Year of Manufacture: 2007 Type: Bar Feeder Ffjdpfxjx Sv S Tj Afneu Technical Details: Diameter Range: 2 mm to 20 mm Channel Diameter: 22 mm Maximum Bar Length: 3,000 mm Installation Dimensions (L × W × H): 3,970 × 480 × 1,250 mm Weight: approx. 850 kg Condition: Age-related wear and tear in line with the year of manufacture. Plexiglass cover is damaged; no other known faults. Special Features: Stability and Precision: Structurally identical to the Express 220 and 320, built on the same base as the Express 332. Provides optimal stability and vibration-free operation, ensuring high surface quality and dimensional accuracy at maximum productivity levels. Loading Capacity: Integrated loading ramp with a capacity of 240 mm allows for long periods of autonomous operation. Fast Diameter Changeover: Quick retooling of the channel guide in less than 2 minutes. Complete change of the guide elements possible in under 8 minutes. Guidance for 2–20 mm Bar Stock: Special channel guide system prevents bars from kicking out. Automatic opening of the channel guide during material feed-through. Summary: The LNS Express 220 stands out with its robust construction, ease of use, and high reliability. This used model, despite age-related wear and minor defects, remains a solid basis for precise and efficient production processes. The machine can be inspected under power by appointment. Modifications and errors in technical data and specifications as well as prior sale reserved.

Condition: excellent (used), Compressor AIRCRAFT ACS Duo – used – Galvanised tank, screw compressor, incl. refrigerated dryer, incl. condensate treatment unit, automatic condensate drain ----- Technical Data ----- Tank capacity: 2 x 100 litres, Filling performance: 360 litres, Max. pressure: 10 bar, Motor: 3.5 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg Quality Info: Fsdpfx Afowb Evtenofu - fully cleaned - electrics checked - immediately ready for operation

Condition: used, Year of construction: 2021, Max. pressure 100 ton Max. bending length 3060 mm Ffodpfexr U Nhjx Afneu Distance between uprights 3384 mm X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

Condition: excellent (used), - Dimensions: 486x965x1219 mm - Capacity: 25L of oil Ffedewybzcepfx Afnju - Year: 05/2015 - Model: PFG-800 - Temperature: 20-200°C - Computer with adjustable programs - Power: 0.6 kW - Voltage: 220V - Weight: 135 kg - Refurbished equipment: the equipment is prepared upon order, pick-up and return dates are agreed at that time (please request price after refurbishment)

Condition: good (used), Extractor for laser, welding, dust, high-pressure self-cleaning LINCOLN brand. Cartridge filter cleaned during operation by pulses of compressed air, thus high efficiency of the device. Fsdpfx Asg Th S Ajfnjfu High-pressure turbine motor with 5.5 Kw and a vacuum of 17.650 PA! capacity 500 m3/h

Condition: used, Year of construction: 2004, Name: High pressure pump Manufacturer: Abel Type: HP-K-25-56 Year built: 2004 Delivery pressure: 100 bar Material: Steel Driving force: 55 kW Ffjdpfxevu Ui Ds Afnsu Flow rate: 14.400 l/h Dimensions: L 2.000 x W 1.000 x H 1.000 mm Empty weight: 1.500 kg Technical doc.: Yes Condition: Second hand Price: On demand

Year of construction: 1991, condition: used, High-pressure pumps are used for cleaning machines and apparatuses.
 Vessels, filter cloths of filter presses and pipelines can be cleaned with them. Name: High Pressure Pump Manufacturer: Uraca Type: KD613 Year built: 1991 Ffedehu U Nfopfx Afnou Material: mild steel Driving force: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liter/min Condition: Used Technical documentation: yes Price: on request