Used Face Grinding for sale (5,057)

Condition: used, Year of construction: 1952, 220 mm ja weight of the machine ca. 1,4 t Itsdeyn R Nwopfx Ac Ejk

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Iodpfx Aexuv Udoc Ejtk Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Sale only within Germany Control System: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Centre height 175 mm - Clamping collet 3409 - Taper mount SK50 - Through bore Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 arcseconds - Input increment 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct length measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Preparation for stack magazine for indexable inserts Measuring System CCD Area Camera: - Indexing and positioning of tools by coolant channel (from Ø0.8 mm) - Measurement of opening angle - Indexing of multi-groove drilling and reaming tools Renishaw Probe: - Touch-off for workpiece length/tool tip - Scanning of groove pitch - Positioning in coolant channel bore at tool tip Electrical Connection: - 63A main fuse - Mains voltage 400V - Frequency 50 Hz - Control voltage 24V - Rated power 21 kW Weight: 8 t Including: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Pressure plate ----- Operating Procedure – For Drills: - Manual loading of chain magazine outside machine enclosure - Automated workpiece handling system - Automatic collet chuck clamping - Workpiece positioning in the working area - Workpiece machining - Automatic return of workpieces onto powered conveyor belt Operating Procedure – For Solid Carbide Indexable Inserts: Iedpfx Acswpqkro Estk - Manual loading of stack magazine inside working area - Automated workpiece handling system - Automatic clamping with special clamping fixture - Workpiece positioning in the working area - Workpiece machining - Automatic return of processed workpieces onto storage system Drill Grinding: - Grinding of flute profile - Grinding of cutting edge - Grinding of circumference profile - Grinding of relief chamfer - Grinding of periphery chamfer - Cylindrical grinding Indexable Insert Grinding: - Grinding of support face and pin ----- Two additional identical machines are also available for sale!

Condition: like new (used), Hollow face carbide saw grinder VOLLMER model MHZ Isdpfxshcw N Eo Ac Eotk

Condition: good (used), functionality: fully functional, grinding depth: 210 mm, center height: 510 mm, spindle speed (min.): 9,000 rpm, spindle speed (max.): 15,000 rpm, grinding length: 1,800 mm, rotational speed (max.): 15,000 rpm, rotational speed (min.): 9,000 rpm, Spindle Speed Min: 9.000 Rpm / Max: 15.000 Rpm Centre height Min: 230 mm / Max: 510 mm Ijdpoyg Hduefx Ac Ejtk Spindle stroke 210 mm Horiz. Table size 700 x 1.000 mm Table stroke 1.800 mm Featured with : - Feed on table - Feed on hor. Movement - Cooling unit - Safety doors

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Used surface grinding machine Rheinberg 2012-2014 retrofit with €80,000: new Wagner magnetic table New Siemens PLC Itjdpfjycgnrex Ac Esk New filters

Condition: refurbished (used), Year of construction: 2020, Machine Type: Cylindrical Grinding Machine Manufacturer: Schaudt Maschinenbau GmbH Model: PS 4 Year of Original Manufacture: 1986 Renovation/Retrofit: 2020 Control System (Post-Retrofit): Siemens CNC SINUMERIK 840D General Specifications Iedpfx Ajw Avrzjc Eotk Application: External cylindrical grinding Grinding Method: Plunge, traverse, face grinding Control Type: CNC (Siemens retrofit in 2020) Machine Weight: Approx. 3,500 – 4,500 kg Installation Area: Approx. 3.5 m x 2.0 m Workpiece Capacity Center Height: 180 mm Distance Between Centers: 1000 mm (varies by version) Max Workpiece Diameter: 360 mm Max Workpiece Weight: ~150 kg between centers Grinding Spindle Grinding Wheel Diameter: 400 mm Grinding Wheel Width: 50 mm Bore: 127 mm Peripheral Speed: Up to 45 m/s Spindle Drive Power: ~7.5 kW Spindle Speed Range: Up to 1,500 – 2,500 rpm (depending on wheel size) Headstock Type: Fixed or rotating spindle Speed Range (if motorized): ~30 – 500 rpm Taper: MK4 or similar Drive: AC Servo (post-retrofit) Tailstock Type: Manual or hydraulically actuated Quill Stroke: Approx. 50 mm Quill Diameter: ~75 mm Axes X-Axis (infeed): CNC-controlled Z-Axis (longitudinal): CNC-controlled Resolution: 0.001 mm Drive Type: Digital servo motors with ball screw Position Feedback: Absolute/Incremental linear encoders Coolant System Coolant Tank Capacity: Approx. 150 – 250 liters Coolant Pump: High-pressure, with filtration system Other Features (Post-Retrofit) Siemens HMI with touch interface Electronic handwheels (MPG) Updated safety system and enclosure New electrical cabinet with ventilation and cooling Optional AE sensor for gap detection or touch dressing

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm Ijdpfx Aezbc I Ssc Estk swing diameter 50 mm centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bore diameter: max. 80 mm Surface grinding device can be swiveled in by hand Iodpfx Aju Ef Dqsc Ejtk Coolant tank with pump without grinding spindle and drive motor was last operated with compressed air spindle Weight: approx. 1400 kg

Condition: used, Year of construction: 2013, grinding diameter 300 mm grinding depth 300 mm Travel distance - Z1 470 mm Travel distance - X1 200 mm Tilt angle - B2 1/1000 ° power capacity 3,5 kW Travel distance - Z2 470 mm Travel distance - X2 325 mm Drive power – External grinding spindles 16,5 kW 120 mm grinding diameter - cylindrical 400 mm sanding belt length 400 mm grinding wheel size Ø 500 x 50 x Ø 127 mm Travel distance - U 470 mm Tilt angle – B1 with longitudinal adjustment -1/+12 ° Tilt angle - B1 with workpiece spindle unit -20/+30 ° Manual longitudinal adjustment of the workpiece sp 470 mm Drive power – workpiece spindle 3,8 kW turning speeds 1-895 U/min Load capacity - Spindle head 200 kg Centre height above the swing bridge 200 mm total power requirement 47 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,54 x 2,83 x 2,3 m Accessories / Equipment: - Pneumatic dressing wheel that extends into the working area (mounted behind the workpiece spindle) - Coolant system with paper belt filter - Central lubrication - Spindle cooling - Documentation Itodpfezfqiwex Ac Esk

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Iedpfx Aceu Su Apo Eotk Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Year of construction: 2002, functionality: fully functional, X-travel 450mm, Z-travel 200mm exhaustion device, extinguishing system, without coolant device weight ca. 4000kg Itodey Ix Ezepfx Ac Esk

Condition: like new (used), Year of construction: 1995, functionality: fully functional, center height: 225 mm, workpiece weight (max.): 100 kg, grinding length: 1,600 mm, CNC cylindrical grinding machine STUDER S40, year of manufacture 1995. The machine is in good used condition. Technical data: • Control: Fanuc Series 16-GC • Required space approx. (Height/Length/Width): 250 cm / 650 cm / 320 cm Axes: • Distance between centers: 1,600 mm • Center height: 225 mm • 4 axes (X, Z, B, C) • Max. workpiece weight approx.: 100 kg Equipment: • 2 grinding wheels + 1 internal grinding stone (selectable via control) • Face, plunge, internal, and cylindrical grinding • Magnetic chuck, three-jaw chuck, collets, between-centers grinding • Automatic dressing device • Steady rest Itsdot N Ivcepfx Ac Eok • Resolution: 0.0001 mm • Polygon grinding • Static balancing unit • Grinding wheels available in corundum, diamond, and CBN • Cycle control • DXF import possible

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 Iodpfjwu Nw Ujx Ac Eetk x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: used, Year of construction: 1970, Technical details: grinding length: 1000 mm grinding width: 400 mm workpiece height: 500 mm Table dimensions: 2230 x 670 mm table surface area: 1340 x 400 mm magnetic plate size: 1000 x 410 mm table load: 450 kg throat of the spindle nose: max 330 mm grinding spindle speed: 1440 U/min total power requirement: 18,2 kW weight of the machine ca.: 3,5 nur Maschine t dimension machine xH: 1,9 x 3,3 x 2,25 m dimensions electric cabinet LxWxH: 1,0 x 0,4 x 1,4 m Itjdpfx Acex Afpao Ejk Precision surface grinding machine Possible surface grinding operations: -cross grinding; plunge grinding; face grinding and grinding with a straight grinding track Further specifications: -hydraulic table speed, infinitely variable 1...30 or 2...30 m/min. -Largest table stroke 1150 mm -Manual cross feed 0.01 mm -Manual vertical infeed of the grinding wheel 0.002mm and minimum infeed 0.001mm -Automatic infeed 0.001...0.1mm -Largest selectable total infeed amount 5.0mm -Coolant system (tank with pump) -hydr. aggregate -control cabinet *

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Itodpfsxzuzcox Ac Eek Dimensions (L/W/H) 3600 x 1900 x 2100 mm weight of the machine ca. 2,25 t

Condition: good (used), Year of construction: 1989, functionality: fully functional, total width: 14,600 mm, total length: 35,350 mm, total height: 18,700 mm, grinding length: 320 mm, grinding wheel diameter: 200 mm, Shaft and bore grinder. Prod. STANKO(USSR) - 1989. Diameter of the ground hole 50 - 300mm. Max. diameter of the workpiece 560mm. Distance between table and spindle 340mm. Maximum length of the workpiece 320mm. Upper diameter of the inner grinding head 125; 100; 80mm. Distance from the front face of the grinding head to the spindle flange 150 - 400mm. Size of grinding disc 200 x 75 x 63 mm. Workpiece spindle speed range 60 - 600 rpm. Table movement 800mm. Iedpfstzwzxox Ac Eotk Power of main motor 7,5 kW Total required power 14,63 kW Dimensions of the machine (Length x Width X Height) 3535 x 1460 x 1870 mm Weight of the machine 6400kg.

Condition: used, Year of construction: 2000, functionality: fully functional, Used Cylindrical Grinding Machine Reckord M 1432 B The Reckord M 1432 B is a high-performance universal cylindrical grinding machine that combines maximum precision with robust construction. With a minimum infeed setting of just 0.0025 mm and outstanding roundness accuracy, it is ideal for demanding grinding tasks in both single-part and series production. Your advantages at a glance: Maximum precision: Minimum grinding wheel infeed of 0.0025 mm ensures top surface finishes and form accuracy. Exceptional flexibility: External, internal, and face grinding – swiveling workhead (+90° / -30°) and table (+3° / -6°) for tapers and complex geometries. Robust construction: Heavy-duty machine bed weighing approx. 4,000 kg for maximum rigidity and vibration damping. Powerful drive: 4 kW grinding wheel motor for rapid stock removal and short machining times. Ergonomic operation: Clearly arranged controls for rapid operator familiarization and intuitive handling. Technical Data Manufacturer: Reckord Model: M 1432 B (Model 1000) Type: Universal cylindrical grinding machine Centre height: 180 mm Max. grinding length: 1000 mm Max. grinding diameter: 315 mm Max. workpiece weight: 150 kg Workhead speeds: 40, 72, 128, 228 rpm Grinding wheel dimensions: 400 x 50 x 203 mm Grinding motor output: 4 kW Total power consumption: 7.8 kW Machine weight: approx. 4,000 kg Machine dimensions (L x W x H): 3240 x 1760 x 1680 mm Colour: Blue (as existing) Condition: Used, fully checked and operational Availability: Immediately ex stock Stockstadt Additional Information Itjdpfx Aceyxglde Eek Scope of delivery: Cylindrical grinding machine Reckord M 1432 B including standard accessories as per the operating manual. Fully checked and operational. Technical documentation: Supplied in German. Optional services: Commissioning and training by experienced technicians, maintenance contract, as well as financing and leasing options on request. Inspection: The machine can be inspected by appointment in Stockstadt am Rhein.

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Itedpfxoh Rit Es Ac Esk Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-cutter 10 end faces 4 chamfers 2 water jets Itodozpy Drepfx Ac Eok Calibration support Belt feed direction from left to right

Year of construction: 2009, operating hours: 11,720 h, condition: used, functionality: fully functional, machine/vehicle number: 2008/065, 1 thread grinding support, 1 water groove support, 7 face grinding supports, 3 upper chamfers, 3 lower chamfers, table extension console, belt running direction from right to left. Itsdpfxew Exx As Ac Eok

Condition: good (used), Year of construction: 2022, operating hours: 7,400 h, machine/vehicle number: 100644, grinding length: 600 mm, workpiece length between centers: 600 mm, feed length X-axis: 650 mm, feed length Z-axis: 1,000 mm, overall weight: 10,000 kg, Control, monitoring, and operating data o NC control: SIEMENS, Type 840 D SL o Year of manufacture: 2022 o Serial number: 100644 o Recorded operating hours: 7,315 o Monitoring system: MARPOSS, Type P7 Travel ranges o X-axis: 650 mm o Z-axis: 1,000 mm Axis speeds o X and Z axis max.: 15,000 mm/min o X and Z axis min.: 0.01 mm/min Working area o Max. grinding length: 600 mm o Center distance: 225 mm Performance data o Grinding spindle: 1 tool for external cylindrical grinding o Tool dimensions: Ø 760 x 250 x Ø 304.8 mm o Cutting speed: 60 m/s o Power: 30 kW Itjdozgbw Iopfx Ac Eok o Max. grinding wheel speed according to text: approx. 80 m/s Workpiece spindle o Axis speed: 5 - 1,000 min⁻¹ o Taper: 5 Morse o Motor torque: 16 N.m Tailstock & facing tool o Taper: 5 Morse o Max. tailstock quill travel: 80 mm o Diamond wheel profiler Saddle drives o Torque of X-axis motor: 28 N.m o Torque of Z-axis motor: 16 N.m Operating data o Year of manufacture: 2022 o Recorded operating hours: 7,315 o Operating pressure: approx. 6 bar General data o 3 x 400 VAC / 50 Hz / 72 kW / 119 A o Weight: 10,000 kg Peripherals • Automated workpiece removal station, JOVI, Type 1113B, year of manufacture 2022, weight approx. 300 kg • Air filter unit, IFS, Type M 1600, year of manufacture 2022, serial no. 567663, weight approx. 85 kg, connection power 380 - 460 V, 50 / 60 Hz, 0.7 kW, 1.5 - 2.1 A • Hydraulic unit, REXROTH, Type Deposito HE-16120 • Coolant filter unit, MICRONFILTER, Type EASY 250 / KMT350, year of manufacture 2022, serial no. 0201, tank volume approx. 2,300 l, connection power 400 V / 50 Hz, 2.44 kW • Immersion cooler, HASCH, Type MCS-120ST-05AOP6R7S7UZ1-3405C, year of manufacture 2022, serial no. 1003220300954, weight approx. 206 kg • Magnetic separator, MICRONFILTER, Type KMT350, serial no. 0211 • Tool loading unit, DANOBAT, Type rotary table lift, year of manufacture 2022, serial no. 3130490901, weight approx. 350 kg, max. load capacity approx. 360 kg

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. Ijdoxq R Haepfx Ac Estk The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø Ijdpfxjw Intas Ac Eotk --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: excellent (used), Year of construction: 1994, internal diameter 300 mm Itedpfxoyrtwrj Ac Eek grinding depth 450 mm swing diameter 660 mm