Used Factory for sale (1,751)

Condition: new, functionality: fully functional, empty load weight: 105 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, Technical Data: Condition: NEW Catalog Number: 1.030-500.0 Power Type (Ph/V/Hz): 1 / 230 / 50 Connected Load (kW): 0.3 Inlet Temperature (max.): 50°C Inlet Flow Rate (min.): 400 l/h Water Flow Rate (l/h): 400-1000 Safety Valve Operating Pressure (max.): 200 bar Hot Water Operating Temperature (max.): 95°C Burner Output: 43 kW Heating Oil Consumption (max.): 3.5 kg/h Fuel Tank: 20 L Fuel: Heating Oil EL or Diesel Operating Weight: 105 kg Length x Width x Height (mm): 880 x 680 x 860 Hsdpfx Aoxtc Rcsf Aofk Scope of Delivery: Classic Hand Spray Gun - M22 Thread Spray Lance: 1050 mm Hose: 10 m - DN8 - 250 bar - 100°C - M22/M22 Hose (connection between high-pressure cleaner and hot water generator) - 3 m - DN8 - 315 bar - 60°C Durable unit: - The robust frame provides protection during continuous and intensive use. - All parts requiring maintenance are easily accessible. - Integrated fuel filter and the option to remove the fuel tank for cleaning.

Year of construction: 2026, condition: new, Fruit processing where you want! The Mobile MK Fruit Processing Unit can be installed and operated anywhere. To operate, only water, electricity and gas or diesel are needed - then the processing can begin. The processing machines can also be used separately by the Mobile MK fruit processing units independently. All machines are made of stainless steel. The vehicle body is made of aluminum and the box made of plastic. The unit is equipped with high-pressure cleaner, compressor and optional built on customer request with weatherproof pre-tent. Hedpjd Arutefx Af Ajfk - Capacity: 600 kg / hour - Weight: 3 tons (depends on the type and number of machines fitted) - Equipped with compressor and high-pressure washer - Water, gas (or diesel), 10 KW of energy required for its operation - Unique tent system against weather conditions

Year of construction: 2026, condition: new, Fruit processing where you want! The Mobile MK Fruit Processing Unit can be installed and operated anywhere. For operate, only water, electricity and gas or diesel are needed - then the processing can begin. The processing machines can also be used separately by the Mobile MK fruit processing units independently. All machines are made of stainless steel. The vehicle body is made of aluminum and the box made of plastic. The unit is equipped with high-pressure cleaner, compressor and optional built on customer request with weatherproof pre-tent. - Capacity: 800 kg / hour - Weight: 3.5 tons (depends on the type and number of machines fitted) - Equipped with compressor and high pressure washer Hsdpfxjd Atf Ss Af Aofk - Water, gas (or diesel), 10 KW of energy required for its operation - Unique tent system against weather conditions

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Hedpfx Asxqd T Hef Aefk Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: used, Year of construction: 2013, Full original line, used straw pellet production line. Also suitable and for wood pellet ( after ring die changes) Hodpezcnwzofx Af Asfk Pellet mill/granulator: OGM 1,5, 75 kw. Capacity about 1 tone/hour. Straw shredder line with hammer mill 55 kw. Orignal control panel. Condition good, pellet mill ful set, with automatic lubrication system.

Year of construction: 2020, condition: good (used), Well-maintained Leica DM IL LED Cellfactory inverted microscope, suitable for cell culture, phase contrast, and routine live-cell observation. Configuration: HI PLAN 4x/0.10 PH0 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 20x/0.30 PH1 objective HI PLAN I 40x/0.50 PH2 objective S40/0.45 Leica condenser (521251) HC C-mount 0.50x Slider HC Plan 10x/20 eyepiece(s) Flexacam C1 with remote control Various accessories A robust setup for laboratories, biotechnology, research, and cell culture applications. Hjdpezhia Hjfx Af Ajfk

Year of construction: 2017, operating hours: 5,000 h, condition: ready for operation (used), functionality: fully functional, Three Geneglace machines installed in one insulated container with ice-collector screw bellow allowing ice for direct drop into ice-bin or to a rotary valve that blows the ice to location (up to 60 meter). The icemachines are connected to a Bitzer screw compressor unit in a pumpsystem using a horisontal liquid separator. The system has a air-cooled condenser in cascade with a schell&tube condenser. If used for leisure snow machine, this is a 100% mobile unit and makes 100m3 meter of dry sub-cooled ice pr. day Machiner is for Freon only, like R449a or R404a or similar. Hjdpfxow R Da Ue Af Ajfk

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Hfsdowcfgbjpfx Af Aek Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. Hfedpjv Nw Npefx Af Ajk The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: good (used), functionality: fully functional, AMF Bakery Tromp puff pastry line direct from major factory. Has been producing 2 tonnes per hour of 90-100 layer puff pastry. Other machinery available from the same line including 2 x Syspal bowl tippers (2024), 2 x Diosna WV240 A Premium wendel mixers (stainless steel model), 2 x Siloba 75 tonne flour silos, 2 x Siloba flour stations. All being removed at the end of August '26. Hedpfszumifex Af Asfk

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Hfedpfx Aszt N R Nof Ask

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Hfedpfsinwwzsx Af Aek Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Condition: used, diameter 250 mm boring diameter / mm - / hollow 65 mm Forkardt power chuck including flange Type: 3NHF250-65-Z8-S12 nmax: 4500/min Diameter: 250mm Hodpfxsy S D Eue Af Aefk Passage: 65mm Factory no.: Y615126

Condition: used, functionality: fully functional, mileage: 385,244 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Hfodpszt H Dtefx Af Aek Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 351,512 km, power: 331 kW (450.03 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Hfodpfxszt H Dgs Af Aok Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 8 mm Front right - 8 mm Rear left inner - 11 mm Rear left outer - 5 mm Rear right inner - 11 mm Rear right outer - 11 mm

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 745 h, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 1,464 mm, fuel type: electric, mast type: triplex, construction height: 2,004 mm, fork length: 1,150 mm, empty load weight: 907 kg, total length: 756 mm, drive type: Elektro, construction width: 770 mm, High-lift stacker Load center: 600 mm Mast type: Triplex Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Rear tyres type: Polyurethane Rear tyres condition: 100% Hfodpfx Asy Et Ursf Aek Battery voltage: 24V Battery capacity: 225Ah Battery year: 2026 Description: Factory-refurbished used machine by Toyota, including new inspection and new approval according to FEM (formerly UVV). Pulse control, full free lift, CE certificate.

Year of construction: 2023, operating hours: 770 h, condition: ready for operation (used), Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details. • Type: Automatic production line for wooden garden screens (custom-made) • Process: Manual loading of planks and intermediate slats into magazines; fully automatic production thereafter • Features: • Automatic discharge and stacking of finished screens • Tilting stacks for efficient processing • Adjustable for 5 different screen types Hodpfjzuhfbox Af Ajfk • Last maintenance: June 2025 • Documentation: User manual, spare parts list, technical drawings, CE dossier

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) Hjdpfxezuhbio Af Ajfk • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Year of construction: 2018, condition: ready for operation (used), This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine. • Operating Principle: Continuous cycle, high-speed automated assembly • Control System: Industrial PC (IPC) with proprietary software and PLC integration Hfjdpfx Ajzug Rijf Ask • Wood Feed System: Automatic hopper or magazine feed for boards and blocks • Nailing Heads: Multi-head pneumatic or hydraulic nailing system • Nail Feed: Automatic bulk nail feeder and sorting system • Stacking System: Integrated automated stacking, accumulating, and conveying • Safety Features: Full perimeter guarding, emergency stops, safety light curtains • Maximum Pallet Production Rate: Up to 1500 - 2000 pallets per 8-hour shift (dependent on pallet size and complexity) • Minimum Pallet Dimensions (L x W): Approximately 600 mm x 600 mm • Maximum Pallet Dimensions (L x W): Approximately 1500 mm x 1500 mm • Total Installed Power: Typically 20 - 40 kW (depending on configuration) • Required Air Pressure: 6 - 8 bar • Machine Footprint (Approx. L x W): Highly variable, typically 20 m x 5 m (production line layout)

Year of construction: 2000, condition: ready for operation (used), This ERREBI TM5 was manufactured in 2000. Designed for wooden pallet and packaging production, it operates on multiple workstations for simultaneous component nailing. Featuring a CNC system, it ensures all movements are controlled with no manual adjustments needed, allowing quick format changes. Optional tools like drills and saws can be added. Contact us for more information about this machine. • Model: TM5 CNC nailing machine for wooden pallets and packaging • Multi-station operation: works on two or more workstations • Capabilities: repeated production of the same component or simultaneous nailing of different parts • Control: CNC-managed movements with no manual adjustments required • Quick changeover: formats recalled from CNC memory for fast setup • Setup aids: production can start in minutes using jigs/templates Additional equipment Hjdpfx Afozug Dvj Aefk • Optional tools: drills, milling units, circular saws, and other equipment • Auxiliary tooling/fixtures: semi-automatic jigs or pre-mounted templates (if available)

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Machine Benefits Technical Machine Benefits • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt Hodezug Dpopfx Af Aefk

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) Hfjdpfx Aozugz Usf Ajk • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Raw mother-board width before longitudinal ripping: 900–1260 mm • Panels are longitudinally divided prior to digital printing and coating operations • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal ripping system with up to 5 saw cuts plus 2 trimming units for production of finished plank widths from 160–510 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) / Alternative stacking configuration maximum stack weight: 3500 kg • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: used, functionality: fully functional, mileage: 287,319 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Hfedpfxsztm I Ej Af Ajk Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Hedpfx Ajc S N Rijf Ajfk Cycle time per part: 15 seconds Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!

Condition: excellent (used), JBT Tipper Tie TN4200LP automatic whole muscle stuffer, netter, clipper and rucker for producing high quality hams. Extremely rare machine on the used market. Has come direct from a UK ham factory which closed in June 2026. Very well looked after since bought new in 2016. Hfedjzh N Hyopfx Af Ajk