Used Felder Kappa 400 for sale (142)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits Hnsdpfx Aoyf A N Djhlor - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Hnjdpfx Aheyzdnbjlor Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Hsdpfx Ajwa Rlkehlsnr Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: excellent (used), Thickness planer Felder D963 Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition. Hnodpfxjxdmu Te Ahler

Condition: excellent (used), Felder RL 250 Extraction Unit Capacity: 6200 m³/h Extraction port: 250 mm Chip container capacity: 500 L Hnsdpfxox A Exuo Ahlsr Fire extinguishing system with water connection Motor: 5.5 kW Weight: 750 kg Very good condition

Condition: excellent (used), Felder F 700 Z Spindle Moulder 205 cm sliding table integrated in the worktop, Spindle adjustable in height and tiltable 0-45 degrees, Hedpjyn Iu Rjfx Ahlsnr Interchangeable 30 mm spindle, 7.3 kW motor, electric brake, Forward and reverse rotation, 4 spindle speeds, Very good condition, fully ready for operation.

Condition: used, Felder AD 741 Surface and Thickness Planer Spiral cutter block Main motor 4 kW, Surface planer table length 2000 mm, Planing width 410 mm, Hnedpsxxavmsfx Ahlor Thicknessing capacity height 230 mm, 1 feed speed, Manual thickness table adjustment with digital height indicator Machine ready for operation, quiet

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Hsdpfxsvph Hxo Ahlonr

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive Hnsdpfxjxzu Nme Ahljr

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm Hnodpfx Ajy Dawkjhler motor power 7,35kW angle regulated fence year 2008 iron cast tables

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Hedsy Agp Dspfx Ahlonr Technical Data Dimensions [mm]: 1660 x 1020 Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Device description Table width - 850mm Hodpfxoyxc Hqo Ahlsnr Drill stroke - max 70mm Number of spindles - 21 Distance between spindles - 32mm 4 pneumatic clamps Drilling depth adjustment Vertical, horizontal and angle drilling 1.5kW main engine Pneumatically adjustable drilling speed Pneumatically adjustable drilling angle Quick-release drill attachment

Year of construction: 2006, condition: used, functionality: fully functional, Planer, jointer FELDER plan51 Hjdpfx Ahoyy Sr Sjlsnr Specification: • Condition – used, after inspection • Manufacturer – FELDER • Model – plan51 • Working width – 510 mm • Table length – 2250 mm • Adjustable tilting fence • Motor power – 7.35 kW • Spindle speed – 5000 rpm • Chip thickness indicator • Max cutting depth – 8 mm • Noise-reducing combs at the shaft • Motor brake • 4-knife shaft, 120 mm diameter, compatible with Tersa knives • Start/stop 0-1 • Chip extraction outlet – diameter 140 mm • Year of manufacture – 2006 • Overall dimensions: 225 x 105 x 125 cm (L x W x H) Additional information: • The machine is in perfect technical condition and ready for immediate use • Photos shown reflect the actual condition of the item • Possibility to run and test the machine on site • Free operator training provided at the company headquarters • Listed price does not include VAT or transport costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financing options available: lease or lease loan

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Hsdjtt Nq Dopfx Ahljnr Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2011, It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Hodpfxexwqmaj Ahlonr

Condition: like new (used), Year of construction: 2023, Felder FB 510 Professional Wood Band Saw – 2023 – Made in Austria For sale: Felder FB 510 professional band saw, manufactured by Felder Group (Austria). This is a high-quality, industrial woodworking machine designed for precise cutting and heavy-duty workshop use. The machine features a robust frame and a large cast iron table, ensuring stability, accuracy, and a long service life. Technical Specifications Model: Felder FB 510 Year of manufacture: 2023 Motor power: 3.0 kW Power supply: 400 V / 3 Phase / 50 Hz Current: 6.4 A Blade length: 4293 – 4343 mm Blade width: 6 – 25 mm Max cutting height: approx. 410 mm Max cutting width: approx. 490 mm Heavy-duty cast iron table Made in Austria Condition This machine is in very good working condition, well-maintained and ready for immediate use. Hnodoyq N Azepfx Ahler Ideal for: Carpentry workshops Furniture production Wood processing facilities Professional woodworking applications

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing Hnjdpeyddqmefx Ahlor CE marking