Used Finger Jointing Cutter for sale (4,656)

Condition: used, Sauter Type RS semi-automatic finger-jointing machine for joining timber workpieces using finger joints. The machine is suitable for processing offcuts and for producing extended solid timber slats. Consisting of: Fodpfxjz D Dw Aj Am Espp Sauter Type RS-FPEL 130 milling and gluing machine Sauter Type RS-DKPV 6 press Sauter DAS 500 cross-cut saw Technical data: - Milling height: 130 mm - Max. finished length: 3,000 mm - Workpiece width: 45–95 mm - Milling motor: 15 kW

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale: a fully automatic, professional Furnimate NAT-620-F line (company information provided at the end of the ad) for industrial-scale wood joining, specifically for end-to-end joining (so-called micro-splices). The line has been customized by the manufacturer to meet our specific requirements for both vertical and horizontal joining, with a maximum length of 6.6 meters (extended from the factory standard of 620 cm to meet our needs). Output: approximately 1500 linear meters per hour (depending on the cross-section of the material). The length can be automatically divided into 6 sections. Fully functional, in continuous use, and a demonstration of its capabilities is possible on-site at the production facility. High-quality Siemens control electronics. Used sparingly, only a few hours per week. Fodezzw R Hspfx Am Ejpp VAT invoice 23%. Manufactured in Taiwan in 2018. In operation since 2019. All parts and sensors are readily available in both the Polish and international markets. If you have any questions, please contact us by phone or email.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Fjdpjx Idl Hjfx Am Eepp Features: – High-performance production line, – Heavy-duty working units, – High feed rates, – Accelerated handling movements ensure high throughput. Depending on the desired output, additional buffer conveyors can be integrated to speed up the production process. TENONER FC-10KZ-6 Specifications Values Milling spindle 50 x 210 mm; 5,500 rpm Spindle motor 18.5 kW Chipper saw (special) 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Workpiece package height 30 to 150 mm PRESS FC-10PZ6 Specifications Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6,000 mm Line capacity up to 15,000 linear meters/shift The following modifications and upgrades have been made to the machine: - New electrical installation - Machine controller replaced with SIEMENS SIMATIC S7 and SIEMENS SIMATIC HMI panel - New infeed table before the tenoners with buffering system - New board turning mechanism – side feeder after tenoners (chain-driven turning mechanism controlled by frequency inverter) - New chain feeder before the press (length 4,500 mm) - Additional pre-scoring aggregates for finger-joint gluing – furniture board installed at the tenoners Machine dimensions: 16.5 m x 5 m

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Fpsdpovwfaxefx Am Eop

Condition: used, For inquiries regarding the attachment, Mr. Herden (tel. ) will be happy to assist you. Cedima Joint Cutting Machine CF-1020.1 B / Joint Cutter / Milling Machine / Year of Manufacture: 2021 / In stock & immediately available Price: €2,290.00 net / €2,725.10 gross - Machine type: Professional gasoline-powered joint cutter / joint milling machine - Engine: Reliable Honda GX-390 single-cylinder gasoline engine - Engine power: 8.7 kW / 11.8 HP - Starting system: Recoil starter (pull cord) with cyclone air filter - Maximum cutting depth: 200 mm - Saw blade diameter: 350 mm up to a maximum of 500 mm - Blade bore / mounting: 25.4 mm - Blade mounting side: Can be mounted flexibly on the right or left - Cutting depth adjustment: Stepless adjustment via handwheel - Feed: Manual - Water tank capacity: approx. 22 liters (can be easily pivoted to the side for filling) - Weight (empty): approx. 121 kg The water tank is included, but it is not shown in the pictures! We have a very large selection of various machines in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 01562C = Further information = Year of manufacture: 2021 Power: 9 kW (12 HP) Unladen weight: 121 kg Please contact Marius Herden for further information. Fpjdpfxo Aintmo Am Esp

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Technical data: Wood infeed length: 150–700 mm Wood width: 40–150 mm Wood thickness: 20–50 mm Press length: 6100 mm Fpsdpfx Amjy N D A Uj Eop Pressing force: 120 kN / 12 t Milling spindle power: 15 kW Chipper power: 5.5 kW Glue application system: Flankenjet / Glue nozzle Performance: Tenoner – 2 bundles per minute Press – 2 cycles per minute

Condition: used, Year of construction: 1997, - Feeding and transport - Milling machine combination with glue application - Transfer station - Infeed station - End face press with stacking Dovetail tenon machine Manufacturer: Grecon Year of manufacture: 1997 Fjdpfszuyw Aox Am Eopp Space requirements for operation and maintenance Length 18500 mm Width 6500 mm Height 2000 mm Weight and floor load Total weight 10500 Kg Floor load dyn. 25 N/cm² Wood data Wood type: Softwood or hardwood Length (min/max) 150 / 2000 mm Width (min/max) 50 / 205 mm Height (min/max) 35 / 50 mm Output length (min/max) 3000 / 6000 mm Machine components Feeding and transport Conveyor belt Type: FB 600 / 1000 Powered conveyor belt with fixed and foldable side guides and a retractable stop for aligning the packages. Technical data Length 1100 mm Width 950 mm Height 1000 mm Power consumption 1.1 kW Feed speed 75 m/min Milling machine Turbo milling combination Type: FDL-F-205/600/500 Two combined milling machines in a heavy-duty design with adjustable tables as workpiece supports, guided by a stable combined ball bearing and roller guide. Each milling machine is equipped with a clamping station, the trimming unit, and the milling unit. Either the second milling machine or both milling machines are equipped with a glue application system. The milling machines can be equipped with a scoring saw. Belts between the milling machines minimize package transport times, thus achieving a fast throughput. A pneumatic vibrating device in the clamping station ensures even alignment of the wood. Horizontal and vertical pressure devices clamp the package. The trimming unit is used to cut a reference edge on the workpiece. This reference edge determines the length of the respective dovetail tenon profile and can be adjusted. The dovetailing is carried out by the milling unit, followed by glue application via a side jet or roller applicator. Technical data Power consumption 63 kW Compressed air consumption 350 NL/min Exhaust diameter 2 x 250 mm Exhaust volume 10600 m³/h Drive Motor 1: Table feed, milling table Manufacturer: SEW Power consumption 1.5 kW Speed 71 rpm Motor 2: Belt drive Manufacturer: SEW Power consumption 1.1 kW Speed 227 rpm Motor 3: Trimming unit motor Manufacturer: Walter Power consumption 5.5 kW Speed 2880 rpm Motor 4: Milling spindle motor Manufacturer: Behnke Power consumption 22.0 kW Speed 3000 rpm Transfer Transfer station Type: ÜL WB 600/1000 Transfer station designed in a robust welded construction with an infeed belt, alignment stop, cross-feed unit, turning device with turning brush, and an outfeed belt, as well as adjustment devices for optimal adaptation to different wood dimensions. The packages of workpieces, which have been milled, are transferred from the milling table of the dovetail tenon milling machine to the conveyor belt of the transfer station and aligned flush with a stop. The aligned wood package is moved transversely to the infeed direction into the area of the turning device by the cross-feed unit. The separation of the wood package is carried out either directly onto the outfeed belt or by turning it 90 degrees and aligning it with a fixed edge. The discharge edge can be adjusted to the wood dimension. The separated wood is transported to the infeed station via a fast-moving conveyor belt. Technical data Power consumption 2.5 kW Compressed air volume 12 m³/h Feed speed 75 m/min Infeed station Infeed station Type: EKK 205 Infeed station with a side chain guide for transporting the separated pieces of wood.

Condition: good (used), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, ram plate width: 1,600 mm, ram plate length: 5,000 mm, Equipment: CE marking, - Bed dimensions: 5000 x 1600 mm - Movable upper bed - Perforated steel beds - Oil-based heating system Fpodpfx Asz Iwucom Esp - Integrated 77 kW boiler - Complete with a loader featuring a pusher and unloading bed - 12 cylinders - 14 side cylinders - Separate control panel with PLC Machine available immediately.

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Cutter condition: Poor Fedpfx Ams Aithts Ejpp Technical data: - Blade: WP - Flight circle (ø): 125 mm - Bore: 40 mm - Length: 30 mm - Material: Steel

Condition: excellent (used), DIMTER HK 400 – AUTOMATIC FINGER JOINTING LINE Fpodpfx Amsxvniij Esp For sale is a fully automatic finger jointing line for wood, DIMTER Type HK 400 E/D. This is an advanced system designed to maximize efficiency and quality in the jointing of both hardwood and softwood.

Year of construction: 1997, condition: ready for operation (used), Workpiece dimensions: 150-1000x50-205x35-50mm, end length: 3000-6000mm, connected load: 80kW, length: 15,480mm, width: 5500mm, height: 2000mm, weight: 10.5t, including documentation. Fpsdpfxsign Efj Am Esp

Condition: used, Year of construction: 2020, Working width from to 50 x 150 mm Working height from to 20 - 50 mm Fodpsyhq Umjfx Am Eepp

Condition: ready for operation (used), -packet-jointing line Fjdebqqzgopfx Am Eepp -for timber infeed 900-5.100 mm -double-roller conveyor -cut saw with marking recognition 15 KW -packaged -finger jointing milling automate 80 KW -singling cross conveyor -roller conveyor -cycle press hydraulic 20 KW -automatic under table circular saw 5 KW -wood widths of 70 - 255 mm -wood thickness from 22 to 140 mm -wood input from 900 to 5100 mm -pressing force 12 tons -capacity from 7.000 to 10.000 meters / 8 h -options example cycle press 25 to or 40 to

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: Fpsdpfxs Aitm Hs Am Eep - Blade: WP Z4 V2 - Flight circle (ø): 125 mm - Bore: 40 mm - Marking: MAN - Length: 60 mm - Material: Steel

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Grooving Line – Double Unit DP20 An industrial dovetail grooving and gluing machine – developed for maximum precision and efficiency. Technical specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail design: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connection power: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of supply: WEINIG NKT Double Unit DP20 including control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-damping and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous output. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Fodpjz E Awqofx Am Ejpp Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range of chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Condition: used, Year of construction: 2004, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 150/500 - CE - Wood entry length 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Wood exit length 3,000 - 6,100 Fpsdpfxewry I Eo Am Esp - Press length 6100mm - Press force 105 kN - Milling unit motor 15Kw - Scoring unit 5.5Kw - Year 2004 CE

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter Fsdjhzzb Rjpfx Am Eepp -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F 1 tilting table with pneumatic material pressure. Automatic cutting saw from bottom. Tenoning milling head able to do the finger-joint as well. Fpjdpfx Aehw Dfnjm Eop Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Feeding automatic. Positioning on end-sensors. Available immediately.

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Fodpfx Amsmig Tdj Ejpp Strong construction. Very good condition. Available immediately.

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Location: Customer Fpedsvvi Tyopfx Am Eop

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: WP Z4 V4 - Flight circle (ø): 150 mm - Bore: 40 mm - Marking: BG-Test Fodpfx Ame Af H Ume Eopp - Length: 50 mm - Material: Steel

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: WP Z2 Fpedpo Aifcxjfx Am Esp - Flight diameter (ø): 125 mm - Bore: 30 mm - Length: 50 mm - Material: Steel

Condition: like new (used), Handling equipment for a finger jointing line. Fsdpfxsd Duz Eo Am Espp Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor, trim saws, etc. See pictures. With documentation. Good condition, made by Martek in Finland.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, MLKT tenoning machine automatic, after complete overhaul, with automatic glue feed Fodpfxoyhnpno Am Espp

Condition: good (used), Grecon notching system Infeed with cross buffer for packet formation 2 milling machines connected, 600 mm table width each milling machine with glue rollers - automatic transfer - continuous press feed - crosscut saw - outfeed roller conveyor with cross transfer Input widths 500 - 4000 mm Fodpfx Amsh I Dufo Ejpp The system has been dismantled and is available for immediate delivery. The control system is defective; a new control system with program is included. It has not been installed, and the program has not been tested.