Used Finisher for sale (3,232)

Condition: like new (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: X60DH3 - For general industry, paints, and contractors. - Maximum flow rate: 13.2 l/min (Output per cycle: 220 cc) Bedpfxez D Tkxs Aknjwu - Xtreme Pump 60:1, cart-mounted - Maximum working pressure: 420 Bar - For high-viscosity paints, polyurethanes, enamels, etc. - Includes new hose, gun, and nozzle - New XTR7 Graco gun - New 15-meter, 500 Bar hose - New XHD519 Graco nozzle - Used product, fully inspected. - 1-year warranty - Shipping or in-store pickup available - VAT not included

Condition: used, functionality: fully functional, This offer is for a used black-and-white production printer, the ‘Ricoh Pro 8300s’ Item for sale: 1 x Ricoh Pro 8300s with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 2,343,873 pages Bwjdoywryqjpfx Akneu Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), functionality: fully functional, Booklet maker for sale. Foldnak Compact with SP plus. Features stitching, folding, trimming, and square folding. Paper format SRA3, maximum thickness of 25 sheets (80 gsm); speed up to 2,000 booklets/hour, stapling heads up to 4 (standard 2) at 6 stapling positions. Also suitable for eye stapling, corner stitching, and block formation. Includes register table, sensor feed, counter, and adjustable belt delivery. Uses inexpensive staples. You are welcome to test this machine at our facility. Bjdpfx Aez E A S Ioknjwu We can arrange transport and packaging and load it onto a truck or container. Please request a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes - Air shock Bodpsw Ec U Ijfx Aknowu web width 360 mm

Condition: excellent (used), overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic Production Booklet Maker (PBM) 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good condition! The machine can be used offline, as shown in the photo, or connected to a machine from the Ricoh Pro 8100/8200, C7100/C7200, or C9100/C9200 series. Counter readings: PBM 350: 187,000 BookFold Module: 176,000 Trimmer Module: 207,000 Produces professionally finished booklets, both inline and offline, with stapling and folding. Bwsdpfjz Atuqox Aknou Capacity: up to 35 sheets of paper (80 g/m²) for folded booklets of approximately 140 pages. Supported paper sizes: width of approximately 206 mm to 320 mm, length up to approximately 457 mm. Suitable for A and B formats and various custom sizes. Are you looking for other options for this machine? We are flexible and can customize the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical service department. Would you like more information? Please feel free to contact us. Worldwide shipping is possible.

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) Bsdpfjzqunzsx Aknewu - The processing trough needs to be replaced.

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. Bodox Syghjpfx Aknswu It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: used, Year of construction: 2019, machine/vehicle number: 138716, functionality: fully functional, power: 2.3 kW (3.13 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 900 mm, total width: 930 mm, total height: 1,850 mm, overall weight: 260 kg, Equipment: CE marking, MACPI 321.715 Industrial Garment Pressing / Finishing Machine (2019) Professional Steam-Pneumatic Finishing Machine for Jeans, Trousers & Workwear The MACPI 321.715 is a professional industrial trouser finishing machine manufactured by MACPI S.p.A., Italy in 2019. Designed for high-volume garment manufacturing, the machine combines steam, compressed air, and pneumatic tensioning to produce consistent, high-quality finishing results for jeans, trousers, chinos, and workwear garments. The unit has been used in professional garment production and remained fully operational until factory shutdown. The machine was tested and video recorded in operation on 05.03.2026. Technical Specifications • Manufacturer: MACPI S.p.A. • Model: 321.715 • Machine Type: Industrial Trouser Finisher • Year: 2019 • Serial Number: 138716 • Country of Manufacture: Italy • Weight: Approximately 260 kg • Power Supply: 400 V, 3-Phase, 50 Hz • Heating System: External Steam Supply • Pneumatic System: External Compressed Air Required • Drive System: Panasonic VF200 Inverter • Control System: Electronic Digital Control Interface Key Features • Professional steam-pneumatic finishing system • Designed for jeans, trousers, chinos, and workwear • Pneumatic garment tensioning system • Adjustable steam and air cycle parameters • Multi-zone finishing process • Digital electronic controls • Panasonic inverter drive • Foot pedal operation • Heavy-duty industrial steel construction • Designed for continuous production environments Includes • MACPI 321.715 finishing machine • Electronic control panel • Panasonic VF200 inverter • Pneumatic clamping system • Steam connection interfaces • Industrial frame • Foot pedal controls • Integrated safety guards Applications • Jeans finishing • Trouser finishing • Chino production • Workwear finishing • Uniform production • Garment manufacturing • Textile finishing departments • Industrial apparel production Condition • Fully functional • Previously used in professional garment production • Tested and video recorded in operation on 05.03.2026 • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use Bwjdpfx Aozidfgsknju • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Bwodpfx Akjzizu Ejneu Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Condition: good (used), Year of construction: 1989, functionality: fully functional, Equipment: cabin, Manufacturer: Garmat Belgium Type: M 6/7A Year of manufacture: 07/1989 Work area volume: 70.5 m³ Fan capacity: 24,000 m³/hour Motor power: 7.5 kW Gas burner: 200 kW Total electrical connection value: 14 kW Operating voltage: 380/220 V The 24,000 m³/hour and 200 kW gas burner make this a serious, professional booth, not a hobby version. Fully functional; Burner and fan are operating; Filter system is complete; Bwjdpfxjzcfp Ie Akneu No significant rust damage. Internal length: approximately 6.70 m Internal width: approximately 4.0 m Internal height: approximately 2.5 m. The dimensions are approximate. External dimensions: 6.85 x 600 x 310 (approx.) The booth can be inspected, and it must be dismantled by the buyer. We will arrange for a forklift to load it.

Condition: excellent (used), Year of construction: 2013, operating hours: 15,159 h, machine/vehicle number: 61600, A trough vibrator (vibratory finishing machine) including centrifuge from the manufacturer Rösler is for sale. The machine is in very good condition and can be inspected on site by telephone appointment. Bwedpfx Ajqrr A Rekneu

Condition: good (used), operating hours: 243 h, The EK-40 is a centrifugal drying system for the rapid and spotlessly clean hot air drying of metal and other materials that are wet or damp after surface treatment. It enables the drying of parts in a rapidly rotating drum, using centrifugal force and hot air. It is preferably used for drying and/or degreasing parts in small to medium quantities and is recommended as a supplement for perfect surface treatment. The centrifuge can be operated with the attached Leister hot air blower to increase the drying speed. Alternatively, it can be used with the included heating coil, or without any heating/ventilation. Bjdpfxez Eqc Ij Aknswu Similar to Steimel centrifuges, Dittmann centrifuges, and Rösler centrifuges – also suitable for oil removal.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold Bodpfszz Rp Asx Aknjwu Meter readings: Total: Approx. 4187 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control Bwjdpszubtljfx Aknou • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, Year of construction: 2015, HORIZON VAC-100 Booklet Making System – 5 Towers / 50 Stations Manufacturer: Horizon Model: VAC-100a + VAC-100m × 4 Towers Year of Manufacture: 2010 Number of Towers: 5 Towers Number of Stations: 50 Bins Bwsdpfx Akozyfvueneu * Finishing System: ST-CV Conveyor ST-40 Stacker SPF-200A Stitcher & Folder HP-200A Punch Unit FC-200A Trimmer LC-200 Long Conveyor PK-30 Preset Kicker Year of Finishing Units: 2015 * Machine Configuration: VAC-100a + VAC-100m × 4 + ST-CV + ST-40 + SPF-200A + HP-200A + FC-200A + LC-200 + PK-30 * Main Functions: Suction-feed collation Automatic booklet making Stitching and folding Hole punching Trimming Condition: Used, inspected, and serviced Availability: Available immediately Location: JCM Corporation showroom, South Korea Packing: Vacuum-packed and export-standard wooden cases

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, C.P. Bourg booklet maker line. In good working condition; can be inspected at our location in Amsterdam. Bwodpfx Aszx Rhyjknou

Condition: excellent (used), Year of construction: 2025, operating hours: 3,700 h, functionality: fully functional, machine/vehicle number: 21220, total height: 1,310 mm, tank capacity: 450 l, usable tank capacity: 310 l, input voltage: 400 V, outer diameter: 1,480 mm, We offer this very well-maintained rotary vibrator RA21, manufactured in 2025. This rotary vibrator is a versatile finishing machine for deburring, rounding, and polishing parts. It offers high finishing performance, easy operation, and reliable processes. Bsdpfx Aezgti Aoknjwu The rotary vibrator has a sloped container bottom, which reliably guides the workpieces to the integrated screening area. The large screening area with a tangential outlet ensures safe separation of workpieces and grinding media. An automatic washing system is installed, which automatically removes grinding dust from the parts. The cleaning centrifuge is used to process contaminated process fluids. These systems are characterized by their high cleaning performance and are equipped with a separate process water tank for dirty and clean water. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Pallet feeder PF Touch screen Navigation with auto set plates rollers Bedsyx Nltjpfx Aknjwu 4 plates 2 knives Side pocket heidelberg presser stacker delivery

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). Bwjdpfjx H T H Rex Aknou FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 1976, Trovalizing machine WALTHER E 5, serial number 12.238, power 0.25 kW, year of manufacture 1976. Bodpfx Akoztc Axjnswu

Condition: like new (used), Plockmatic BLM 500 + TR500 + BF500 + RCT 500 Including: Trimmer, Creaser, Rotate unit. Can be attached to Ricoh Production Machines but can also be used as an offline machine! Very cost-effective booklet maker. The RCT unit is available separately and can be placed between your Ricoh and Plockmatic! Bwodpfxjxf Hqkj Aknju

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Polishing machine, TROMA Model T 60-1 - Capacity: 60 liters - Stepless speed control via frequency inverter - Trough diameter: 680 mm - Overall height: 750 mm - Drive power: 1.1 kW - Drain valve - Total weight: 110 kg Errors and omissions excepted. Bwjdpozzqa Iefx Aknou

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon imagePRESS C710” colour production system Item for sale: 1 x Canon imagePRESS C710 with the following specifications: incl. multi-drawer paper deck incl. Fiery E-400-10 Includes Duplex ADF / R-ADF Includes Staple Finisher W1 Pro Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,382,879 pages Black: Approx. 323,301 pages Colour: Approx. 1,059,578 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Bjdpfoz Aqi Eex Aknswu Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 Bjdpfxjyngite Aknowu 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker Bedpfx Akezzp Scjnjwu VFX high-performance feeder with vacuum feeder CST 5000 creasing and 2-sided trimming module for head and foot trimming FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000