Used Floating Dredgers for sale (320)

Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth. The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye. As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network. Ksdpfovv Nwxex Ap Dedu

Condition: new, Power that transcends tough terrains: Galen Group's dragline buckets effortlessly handle the heaviest loads with durability and engineering excellence! Please contact us for inquiries. Kdjdpjvzhb Tsfx Ap Deu

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 Kdodpfx Aoz N Sy Dep Dsu BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Condition: excellent (used), functionality: fully functional, For sale: an industrial submersible pump, ORPU Sonel B 60/2, manufactured in Germany, with a maximum flow rate of 80,000 liters per hour. This pump is designed for draining and pumping water. Technical specifications: Brand: ORPU Model: Sonel B 60/2 Maximum flow rate: 80 m³/h – 80,000 l/h Maximum head: 25 m Ksdpez Syk Aofx Ap Dodu Power: 5.2 kW Power supply: 400 V, three-phase Frequency: 50 Hz Manufacturer: Oranienburger Pumpen + Verdichter GmbH Country of origin: Germany The pump is equipped with a metal housing, a lower suction basket, a discharge connection with a quick-release coupling, a power cable, a float switch, and a carrying handle.

Condition: used, functionality: unexamined, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights Kodpfx Ajz S Nbwsp Djdu CEE power plug

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW Kdsdez Dnr Rjpfx Ap Dou MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Ksdpfx Apswm Nd Ee Dsdu

Condition: ready for operation (used), Floating pontoon made from gravel extraction. Ksdozck A Topfx Ap Dodu

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Ksdpfxow D Uggj Ap Dsdu

Condition: new, functionality: fully functional, mileage: 100 km, power: 368 kW (500.34 HP), gearing type: automatic, fuel type: diesel, color: white, axle configuration: 8x4, first registration: 01/2027, Year of construction: 2026, operating hours: 10 h, Equipment: ABS, air conditioning, parking heater, traction control, New vehicle SB 2005 - Available from January 15, 2027 Standard superstructure DINO Vario 12m³ Volvo FH500 8x4-4 NLA MTS suction excavator DINO Vario 12m³ Standard equipment: MTS suction superstructure MTS double fan (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5m³/min, 8 bar POWERARM articulated arm with 7m suction hose 3 stabilizing supports PLC control with remote diagnostics Wireless remote control Set of demolition and air release tools Documentation TÜV inspection Optional extras: Container with stainless steel lining MEGAARM articulated arm Rotating suction pipe system IKE/PERFOR Suction & Drive & Steer HYDROSTAT Kedpsz Ixf Asfx Ap Dodu Full fairing DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full fairing DESIGN Electric steering Storage box made of stainless steel (max. 1,200mm wide) Step ladder with 3 steps under the hose rack Step ladder with 3 steps (on both sides of the machine housing) Industrial equipment: Infinitely variable speed control for special models HBC wireless remote control with display (2x wireless with cable function) Accessories - Lighting: Lighting package I: 3 LED lights on the vehicle frame Lighting package II: 2 LED lights on the center joint of the articulated arm Lighting package III: LED light strips in the tool box Lighting package V: LED lights next to the articulated arm shaft Lighting package VIII: Light bar on the cover (rear) The general terms and conditions of MTS GmbH apply, which can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen New vehicle Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, LiSEC – PKL, SBL, ATL, LBR, GFB-60/30 RE-S, VB-45 Float (Low-E) and Laminated Glass Cutting Line with mobile overhead crane (gantry) with rotating suction frame for automatic pick-up of large-sized glass sheets (jumbo) and automatically movable shelf rack storage systems (LBR). Construction year: 2008 Max. glass size: 6000 x 3210 mm In good condition. Inspection is possible by appointment. Kedpfsy Ruliox Ap Dedu Available: NOW

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €39.900net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA Kodpfszzdyzox Ap Dodu • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €39.900 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, axle configuration: 6x2, first registration: 07/2024, emission class: euro6, Year of construction: 2024, operating hours: 680 h, Equipment: ABS, air conditioning, parking heater, traction control, Available from January 1, 2027. Used suction dredger directly from the manufacturer - for sale or rent. Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you will find used suction dredgers directly from the manufacturer - professionally inspected, technically and visually refurbished, and ready for its next assignment. Currently available: MTS DINO VARIO 8 m³ - SB 1612 on Volvo FH 6 x 2 Suction unit: Proven quality directly from the manufacturer 6-month warranty 1 year / 500 operating hours maintenance-free Fan operating hours: 652 h Compressor operating hours: 670 h Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, air compressor 4.5 m³/min, 8 bar POWERARM with 7m suction hose 3 stabilization supports PLC control with remote diagnostics capability Wireless remote control (brand: Gross Funk) Storage option Special module options Container & lid, stainless steel lining Stainless steel toolboxes EVO-POWER ARM Rotating suction pipe system IKE/PERFOR Suction, drive & steer HYDROSTAT Electric steering Volvo Full cladding DESIGN High-tipping system HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment Industrial package II: gas sensor Variable speed control, fan Filtration unit, oil circuit Environmental equipment Hydraulic oil, biodegradable Noise reduction package: sound insulation, container exterior Accessories - Module Container with 2 pneumatic vibrators Access ladder, engine house (2x) Ladder under the hose rack Accessories - Lighting Light package II: 2 LED lights on the center joint of the POWERARM Light package III: LED light strips in the toolbox Light package V: LED lights next to the POWERARM shaft Light package VII: Fire brigade lighting 2x Light package VIII: Light bar at the rear Accessories - Safety 4 flashing beacons Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance The used car general terms and conditions of MTS GmbH apply, which can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment and other details at any time. This information is not binding and does not create any contractual obligations. Kodpjzvw U Uefx Ap Dedu

Year of construction: 2016, operating hours: 9,580 h, condition: excellent (used), functionality: fully functional, Edge Polisher Comandulli Musa 7+4 DX Partially worked meters: 5578 m Total operating hours: 9580 h Working direction: from right to left - Advance/feed speed (conveyor belt): 0 to 3 m/min - Belt width: 600 mm - Working thickness: 10 to 80 mm - Min. working width: 80 mm - Max. working width (without bar): 1200 mm - Max. working width (with bar): 3000 mm - Loading plane height: 750 mm Aggregates: - Calibrating spindle with vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles, no. 7, with floating mechanism – oscillation - Beveling spindles, no. 4. The first two beveling spindles (no. 1 upper and no. 1 lower) are inclined at 45° and equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously generated bevels. Automatic valves for water 2 roller tables, each 1.5 m long Color touch screen Rated output: 22 kW Dimensions (excluding rollers): 5.15 x 1.8 x 1.74 m Kdsdpszipzgsfx Ap Dju Weight: 4000 kg

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Kedpfx Apez Sw Nis Dedu Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: excellent (used), CATALOGUE NUMBER 8017 TECHNICAL DATA - track width 335mm - arbor width 400mm - max. blade diameter 350mm - blade arbor hole diameter 80mm - max. cutting height 120mm - table width with clearance 700mm - table length 1720mm from above: - guides/pawls - roller, sliding pressure, metal - guides/pawls - roller, sliding pressure, metal - arbor with saw blades - sliding pressure arbor, metal, 2 pcs from below: - pneumatic guide rail - sliding metal roller - guides/pawls - track - sliding metal roller, outfeed - electric body lifting 0.35kW - manual arbor lifting with saw blades - central lubrication - stepless feed rate adjustment 1.5kW - main motor 30kW - laser 3 pcs Ksdpfx Apjzrmqwj Dedu - floating blade - additional sleeve for multi-blade saw - saw blade cleaning - extraction nozzle diameter 260mm - overall dimensions L/W/H 2300x2000x2150mm - weight approx. 3000kg ADVANTAGES – German production – floating blade – laser 3 pcs – saw blade cleaning – additional sleeve for multi-blade saw – pneumatically adjustable guide rail – stepless speed adjustment – used multi-blade saw, very good condition Net price: 136900 PLN Net price: 31837 EUR depending on the exchange rate of 4.30 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Kodpfxez Ru Iys Ap Dedu Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK GF1500 PROFESSIONAL CHAIN TRENCHER – POWER, PRECISION AND PRODUCTIVITY The CORMAK GF1500 Chain Trencher is a professional machine designed for digging narrow trenches for cables, pipes, irrigation systems, water supply lines, drainage systems, and other underground utilities. Thanks to its precision, high working speed, and compact dimensions, it can easily operate close to fences, buildings, and other obstacles, even in confined areas with very hard or compacted soil. Key Features and Advantages Powerful 15 HP engine – delivers high cutting chain traction for efficient operation in hard and compacted ground. Precise trench dimensions – digging depth up to 600 mm with a trench width of 100 mm. Heavy-duty cutting system – the chain is equipped with 27 carbide-tipped teeth, allowing it to cut through roots and small stones with ease. Excellent manoeuvrability – the balanced design and compact dimensions make the machine easy to operate in narrow gateways, gardens, and confined working areas. Heavy-duty industrial frame – manufactured from thick-walled steel profiles with a durable powder-coated finish for maximum resistance to mechanical damage and corrosion. Operator safety – equipped with protective guards and ergonomically positioned controls for safe and comfortable operation. Applications It is specifically designed for creating straight, clean, and narrow trenches for: Electrical cables Fibre optic cables Water pipes Gas pipelines Drainage systems Irrigation installations Machine Specifications Specification Value Trenching Width 100 mm Trenching Depth 150 / 300 / 450 / 600 mm Number of Teeth 27 carbide-tipped teeth Chain Length 2,000 mm Maximum Chain Speed 550 m/min Tyres 145/70-6 Machine Height 1,100 mm Machine Length 2,100 mm Machine Width 720 mm Machine Weight Approx. 175 kg Kdjdpfx Apovzqk Re Dsu Engine Specifications Specification Value Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW (12.24 HP) Maximum Engine Power (EPS*) 15 HP Starting System Manual recoil starter Cylinder Cast-iron sleeve Cylinder Bore 90 mm Stroke 60 mm Maximum Engine Speed 3,600 rpm Fuel Tank Capacity 6.5 L Engine Oil Capacity 1.1 L Dry Engine Weight 31 kg Engine Dimensions (L × W × H) 499 × 370 × 433 mm *EPS – Effective Power Solutions Engine Features OHV technology – provides optimum performance, longer engine life, and improved fuel efficiency. Lo-Tone PRO muffler – significantly reduces operating noise for quieter performance. Dual air filtration system – protects the engine from airborne contaminants, extending service life. Automatic governor – maintains stable engine speed and delivers consistent power under demanding working conditions. Cast-iron cylinder sleeve – improves durability, wear resistance, and oil control. Dual ball bearings – increase engine durability and extend service life. Float-type carburettor – ensures precise fuel delivery for easier starting and reduced fuel consumption. High torque output – delivers greater pulling power and improved digging performance. Protective spoil guard – shields the operator from excavated material thrown by the digging chain. The CORMAK GF1500 combines powerful performance, precision trenching, and robust construction, making it an ideal choice for demanding professional applications in construction, utilities, and landscaping.

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, power: 2 kW (2.72 HP), Equipment: type plate available, Ringler RI 100W2G chip extractor including mechanical float switch (overflow protection) and filter basket. Fully functional, used for extracting chips from machines/coolant systems. Power: 2.0 kW, 230 V Year of manufacture: 2015 Kdjdpfxe Aawbmj Ap Deu Accessories: - Mechanical float switch to prevent overflow - Filter basket - Suction hose - 2x nozzle Shipping via freight forwarder is possible or pick-up in 06112 Halle. Sale to commercial businesses only, excluding any warranty.

Condition: used, mileage: 275,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Kdodjzn El Sepfx Ap Dsu Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components Kjdoz Rv Dpspfx Ap Dodu The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: used, functionality: fully functional, machine/vehicle number: 33142, mileage: 33,900 km, power: 335 kW (455.47 HP), first registration: 11/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, KROLL superstructure with water recovery: The mileage of the offered vehicles may vary, as some vehicles are currently being rented! Ksdps Aaz Scefx Ap Dodu Further comparable vehicles are available upon request. Weight variant 28 t, engine OM470, regulated water pump, engine brake, gearbox lock for auxiliary drive, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assistant, attention assistant, Active Sideguard Assist, starting aid, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable, liftable and load-relieving 9 t trailing axle, axle load measuring device, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: 1st and 3rd axles 385/65R22.5, 2nd axle 315/80R22.5 Total tank volume 14 m³; closure bottom over the entire cross-section of the tank, which can be opened upwards with 2 hydraulic cylinders; lid locking with clamping claws, hammer-head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder; the unlocking can only be done under vacuum; level indicator: with 2 internal floats and an external scale; calibrated in 500 l steps for each piston position; discharge chute made of aluminum; emptying via pneumatically operated piston; piston with manhole DN 450 mm; tank division: locking of the pneumatic piston manually in 3 different positions; vacuum pump: VacuStar WR 2500 (2,500 m³/h at 400 mbar), water-cooled, mechanically driven via cardan shafts, lower and upper suction and discharge connections DN 100 with Perrot M coupling and blind cap, pneumatically operated; suction hose cassette with telescopic boom DN 125: the boom arm can be telescoped hydraulically up to 2,000 mm; the telescopic boom can be swiveled 180°, either together with the high-pressure hose reel or, after releasing a pneumatic lock, also independently of the high-pressure hose reel; the in- and out-movement of the suction hose is carried out hydraulically; incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling; sludge water drain DN 80; high-pressure pump: URACA P 3-45 (approx. 348 l/min at 205 bar), drive mechanically via cardan shafts, pipelines/fittings: water filling via a Storz-C connection; water pressure can be adjusted continuously; large HD hose reel: hydraulically swiveling 180°; hydraulically driven; speed adjustment continuously adjustable; pressure line to the reel in DN 32 mm; sewer cleaning hose: DN 25 mm - 240 m long; small hose reel: hydraulically driven with 60 m HD hose DN 13 mm; spray gun for max. 200 bar operating pressure; low water warning system; residual water emptying pneumatically via the compressed air system of the chassis; water recovery system "Kroll Recycling System WRS 1", all working functions fully automatic combined operation of suction and high-pressure cleaning, variable water and sludge chamber, emptying by discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention; rotating beacon mounted on the rear of the vehicle at the top; halogen work spotlights; removable and swiveling with 20 m cable; ambient lighting: 4 LED spotlights (one each on the right and left and on the boom); switchable from the control panel; control panel: mounted on the rear right of the superstructure and on the high-pressure hose reel; stainless steel with louver; illuminated; radio remote co

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 030-062962, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 6,000 mm, LiSEC ESL-6030RS-L – Automatic Glass Cutting Line Complete automatic LiSEC line for precise and high-speed cutting of float, Low-E and laminated glass. Manufactured in 2013, the line consists of four interconnected components that together form a complete system for glass loading, transport, cutting and breaking. The cutting table is equipped with a magnetic drive and a Low-E coating removal head, allowing coating removal and glass cutting within the same process. Line Components: 1. Float and Low-E Glass Cutting Table - Model: LiSEC ESL-60/30RS-L - Serial number: 030-062962 - Year of manufacture: 2013 - Glass thickness: 2–19 mm - Cutting of straight and irregular shapes - Low-E coating removal system 2. Laminated Glass Cutting Table - Model: LiSEC VB-33 - Serial number: 040-014769 - Year of manufacture: 2013 - Designed for cutting laminated glass - Supported configurations: 33, 44, 55, 66 and 88 3. Glass Breaking Table - Model: LiSEC BTS-37/33 - Serial number: 054-054715 - Year of manufacture: 2013 - Weight: 1,525 kg - Maximum load: 55 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 10.89 kVA - Operating pressure: 8 bar - Protection rating: IP32 Kdsdpsz Ilriofx Ap Dou 4. Tilting and Transport Table - Model: LiSEC ATH-60/30FD - Type: Double-Sided Moveable Glass Un/Loading Station - Serial number: 011-071248 - Year of manufacture: 2013 - Weight: 6,040 kg - Maximum load: 48 kg/m² - Power supply: 400 V, 50 Hz - Connected load: 7.80 kVA - Operating pressure: 6 bar - Equipped with new mechanisms and vacuum suction cups for handling glass sheets Condition: - The complete production line is in good working condition and fully operational, - Documentation and additional technical information are available upon request, - A set of spare parts is included with the production line, along with an estimated value of the spare parts, - The production line will be available for collection from December 2026, - On-site inspection of the machinery is possible by prior arrangement. Note: - Glass racks for jumbo glass sheets are not included in the sale (we provide drawings for their construction) - The metal guideways in the floor for the Tilting and Transport Table are not included in the sale

Condition: excellent (used), CATALOGUE NUMBER 7890 Technical specifications: - track width 245mm - shaft width for the edger 380mm - shaft width for the multi-blade saw 320mm - max. blade diameter 350mm - blade arbor diameter for the edger 80mm - blade arbor diameter for the multi-blade saw 65mm - max. cutting height 120mm - table width with clearance 900mm - table length 1780mm – from above: - feed rollers/ejectors - smooth pressure shaft - feed rollers - smooth pressure shaft - insert for short pieces - shaft with saws - 2 smooth pressure shafts – from below: - guide - feed rollers/ejectors - track - central lubrication - laser - stepless feed speed adjustment - feed motor 1.1kW - main motor 30kW - manual lifting of the machine body - manual lifting of the saw shaft - dust extraction nozzle diameter 210mm - overall dimensions L/W/H 1900x1500x1800mm - weight approx. 2000kg ADVANTAGES - German production - stepless feed speed adjustment - floating blade shaft for edging - multi-blade saw sleeve included Ksdpfx Apezhvhke Djdu - laser - insert for short pieces - multi-blade saw, used, very good condition Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, The STF 3.0 float-sink separator with a highly efficient SP1000 Mk2 centrifuge and VS1 water screen. A compact yet powerful washing system that requires little maintenance and can wash and sort up to 3,000 kg/h of hard plastics. Kodpfx Aoxhf H Njp Dedu The machines are constructed entirely from 304 stainless steel, allowing salt solutions to be used without any issues. A zinc float tank with centrifuge, water screen and big bag station is in stock and available for immediate delivery; further machines are available to order. Please contact us for further information.