Used Four Pillar Press for sale (16,084)

Year of construction: 2011, condition: used, Technical Data Mains voltage: 400V / 50Hz Control voltage: 24VDC Operating pressure, pneumatics: 5 - 6 bar Operating pressure, hydraulics: 120 bar Connected load: 5.8 KW Cgsdpfjynf Hqex Ab Uor Weight of pressing head column: approx. 200 kg per column Weight of assembly floor: Depends on model 3,175 kg – 4,665 kg Weight of switch cabinet: approx. 180 kg Weight of mounting material: approx. 100 kg Total weight of machine: Depends on model approx. 4,255 kg – 5,745 Assembly floor height: 152mm (+/-20mm) Max. mounting floor size: Art. no.: 282 400: 3000 x 4000mm Min. working area: 620 x 620mm Max. working area: Art. no.: 282 400: 3000 x 4000mm Max. profile height: 250mm Max. profile slot offset: +60mm / -20mm Min. pressing height: 5mm Max. pressing height: 150mm Max. wall strength: 2.4mm (for 7mm pressing tools)

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm Cgedpfx Aox Uru Nob Uor table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Cedpfjwzzzfsx Ab Ujgr Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Year of construction: 2016, condition: ready for operation (used), Max. pressing force: 80kN, stroke: 180mm, power stroke: 12mm, weight: 760kg. Cgedpeifptyefx Ab Usr

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Possible applications: can be used as a deburring press Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates Cgsdpfx Aeu Nfmasb Uor *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm Codpfx Aeu Nfn Reb Uegr clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: good (used), Year of construction: 1983, machine/vehicle number: 809.14, Offer 25461 Technical data: - Max. pressing force: 30 t - Press pressure regulation - Stroke infinitely adjustable up to 200 mm - Stroke speed adjustable - Max. installation height: 450 mm - Machine table with T-slots: W 800 x D 500 mm Cedpfx Aboyff H Ss Usgr - Clearance between columns: 600 mm - Usable table area: W 800 x D 500 mm - Drive: 400 V / 11 kW - Required space approx.: W 1000 x H 2300 x D 1600 mm - Weight approx.: 2500 kg

Year of construction: 1999, condition: used, pressure 630 t passage width 1390 mm stroke 400 mm table surface area 1390x1250 mm Cgsdpfxjlp U R Sj Ab Ujr total power requirement 75 kW weight of the machine ca. 36 t dimensions of the machine ca. BxTxH 3200x2800x4000 mm

Year of construction: 1991, condition: used, pressure 100 t passage width 810 mm stroke 400 mm table surface area 1140x740 mm ram surface 1140x740 mm dayligth 670 mm weight of the machine ca. 8 t dimensions of the machine ca. 1800x1800x3000 mm Cgodpelp U D Nsfx Ab Uor

Condition: used, Year of construction: 1992, pressure 300 t passage width 1350 mm stroke 500 mm column travel -side 830 mm table surface area 1350x1380 (1870x1380) mm table height 1060 mm total power requirement 45 kW weight of the machine ca. 20 t Cgodpfovn U Srex Ab Uor dimensions of the machine ca. BxTxH 2500x2000x3950 mm

Year of construction: 1991, condition: used, pressure 150 t passage width 1100 mm stroke 500 mm table surface area 1100x1070 mm ram surface 1100x1070 mm hole in the table 475x450 mm table height 920 mm dayligth 800 mm weight of the machine ca. 8 t Cgsdpjlp U R Dsfx Ab Uer dimensions of the machine ca. BxTxH 2000x2000x3600 mm

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton Cgodpfx Abowva I Hs Ujr The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: good (used), pressure 250 t Codsxcblwspfx Ab Ujgr passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: new, pressure: 100stroke: 300tappet area: 600 x 900table area: 700 x 1100daylight: 550rapid traverse: 100working speed: 8Return speed: 165motor: 11 - ight curtain - manual and automatic working - manual stroke adjustment by camshaft switch - maintenance free self lubricating 4-fold ram guiding Cedpfxed Ab Ihs Ab Ujgr - polster plate with T-slots - according to CE rules press force:100 tohydraulic pressure:240 bartable:1100 x 700 mmram dimension:900 x 600 mmhole in table:120 mmstroke:300 mmdistance ram-table:550 mmrapid speed:100 mm/sworking speed:8,5 mm/sreturn speed:165 mmmotor:11 kWlength:2.180 mmwidth:1.600 mmheigth:3.150 mmweight:6.500 kg

Condition: new, pressure: 40stroke: 500table area: 700x500daylight: 600rapid traverse: 26working speed: 9motor: 4Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Cjdpfx Ajwwx Areb Usgr Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, die cushion stroke: 200daylight: 600pressure: 60stroke: 350 Codpfod Ab Iiex Ab Uogr

Condition: new, die cushion stroke: 200 Cgedpfx Aod Ab Ikob Usr

Condition: new, die cushion press capacity: ohne Cgjdod Ab Injpfx Ab Usr

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Codpfsmmuq Iox Ab Uegr Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 150stroke: 500table area: 800x600daylight: 630rapid traverse: 22working speed: 3motor: 4messurements (LxWxH): 1800 x 1200 x 2400weight approx.: 4500Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Cgodpfx Abjwwx Afo Usr Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, pressure: 200stroke: 500table area: 1000 x 600daylight: 640rapid traverse: 21working speed: 2motor: 5.5messurements (LxWxH): 1800 x 1300 x 2500weight approx.: 6400Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation Cjdpfx Abewwx Alj Ujgr

Condition: new, pressure: 70stroke: 500table area: 700x500daylight: 600rapid traverse: 25working speed: 5motor: 4messurements (LxWxH): 1400 x 900 x 2250weight approx.: 1900Features:Two-stage hydraulic pump – integrated into the machine frame Cedpowwx Axjfx Ab Uogr Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Codpfx Abed Ab Ile Uogr

Condition: new, die cushion press capacity: ohne Codpfod Ab Ipsx Ab Uogr

Condition: new, pressure: 100stroke: 500table area: 800x600daylight: 615rapid traverse: 26working speed: 4motor: 4messurements (LxWxH): 1600 x 900 x 2300weight approx.: 3100Features:Two-stage hydraulic pump – integrated into the machine frame Lever and push-button control – with simultaneous two-hand operation for safety Cgsdpfx Abswwxz Uj Uor Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation