Used Four Side Planer for sale (20,231)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20190824, feed rate X-axis: 33 m/min, overall weight: 2,800 kg, rotational speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, workpiece width (max.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely adjustable feed speed: 8-33 m/min Spindle diameter: 40 mm Spindle 1 - bottom: Ø125 mm (Ø152 mm groove cutter), 4 kW Spindle 2 - right: Ø115-170 mm, 4 kW Spindle 3 - left: Ø115-170 mm, 4 kW Blodpfx Aeyu Ii Iepboh Spindle 4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Roller feed system dimensions: Ø140x35x50 mm Extraction connection diameter: 4 x 120 mm MACHINE DETAILS Feed motor power: 3 kW Total electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Solid cast and welded steel frame Chromed worktable for secure material feeding Side guide rollers for material with pneumatic drive Professional cardan shaft drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Electric adjustment of working height Ergonomically positioned control panel according to EU standard

Condition: good (used), working width 180 mm working height 120 mm 1 lower spindle 3.7 kW 2 right spindle 3 kW 3 left spindle 3.7 kW 4 upper spindle 3.7 kW two feed speeds: 6 and 12 m/min Bedpfsyncgbex Apbjlh

Condition: good (used), WEINIG PROFIMAT 22N four-side planer - DTR - German production - adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm Blodpoh Akbaefx Apbjh spindle diameter 40 mm 1) 4 kW lower head 2) right head 3) 5.5 kW left head 4) 4 kW upper head 5) universal head 360 ° 4 kW 2.2 kW feed motor feed speed 5 - 20 m / min four upper drawing steel rollers two upper pulling rubber rollers one pull roller in the table top feed on cardan shafts electric height adjustment pre-table length 1970 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 380/200/170 cm weight ~ 2000 kg

Condition: like new (used), Year of construction: 1991, functionality: fully functional, Weinig PROFIMAT 22N four-sided planer - overhauled - very good condition - DTR TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm diameter of spindles 40 mm bottom head 4 kW right head left head 11 kW top head 5.5 kW bottom head 4 kW feed motor 2.2 kW feed rate 6-22 m/min four steel top draw rollers one rubber top pulling roller feed on cardan shafts pneumatic pressure electrical height adjustment length of the worktop 2485 mm overall dimensions of the machine (length / width / height) 400 / 180 / 170 cm Bjdpfothfh Ejx Apbslh weight ~ 1800 kg

Condition: used, Year of construction: 1994, Used machine Bljdpfxsx Enrfe Apbsh Year of manufacture: 1994 Features and Technical Data: - Length of jointer table: 2100 mm - Spindle diameter: 30 mm - Planing head diameter: 100 mm - Planer spindle speed: 6000 rpm - Working width: 30 - 180 mm - Working height: 6 - 120 mm - Motor power, bottom/left/right: 3.7 kW each - Motor power, top (thicknessing shaft): 5.5 kW - Feed speed: 6 and 12 m/min - Electric height adjustment - With 1/10 step control - Including electronically controlled infeed roller - Including planing heads - Extraction connectors: 160/120/120/140 mm Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Workingwidth: max. 230 mm / min. 18 mm. Workingheight: max. 150 mm / min. 8 mm el height adjustable Speed 7-36 m/min. 3,7 kw motor, cardan Blsdpfsxr U Azsx Apbeh 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen see all technical features attached file

Condition: like new (used), Feeder for four-sided planer VANHOLD, 0.55 kW Bledpfx Aeyq Hxmspbsh

Condition: used, Technical specifications: Max. planing width: 240 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: bottom right left top bottom Each spindle driven by a separate motor Number of upper steel feed rollers: 4 Number of upper rubber feed rollers: 2 Extraction port diameter: 150 mm Infinitely variable feed speed control Feed through cardan shafts Lubrication pump for the work table Pressure: 6 atm Electric lifting of machine body Power supply: 380 V Total power: 31 kW Bledpfx Aov Hzh Dopbeh Overall dimensions: Length: 4000 mm Width: 1740 mm Height: 1730 mm

Condition: excellent (used), planing width 230mm feed on gimbals (7.5 kW) 10 heads: 1 bottom 7,5 kW 2 right 7,5 kW 3 left 7,5 kW 4 right 7.5 kW 5 left 7.5 kW Blsdpfjuldn Hsx Apbeh 6 top 7.5 kW 7 bottom 7.5 kW 8 top 7.5 kW 9 bottom 7.5 kW 10 universal 4 kW

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 9409009, working width: 260 mm, planing height: 150 mm, planing width: 260 mm, working height: 150 mm, power of feed motor: 11 W, workpiece height (max.): 150 mm, workpiece width (max.): 260 mm, Equipment: rotational speed infinitely variable, For sale: four-sided planer, maximum planing dimensions 150x260 mm. Feed speed 6 – 36 meters per minute, infinitely variable. Motor 1 Bottom spindle 11 kW Motor 2 Right side 11 kW Motor 3 Bsdpfxexlf E To Apbolh Left side 11 kW Motor 4 Top spindle 11 kW Motor 5 Right side Frequency controlled 11 kW Motor 6 Left side Frequency controlled 11 kW missing Motor 7 Right side Frequency controlled Saw spindle 18.5 kW Motor 8 Left side Frequency controlled Saw spindle 18.5 kW Spindles 7 and 8 can saw over 200 mm wide together. All bottom feed wheels are driven, including a profile wheel for the first spindle.

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Blodpjwz Nzmjfx Apbeh Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: excellent (used), Four side planer KP5-220 made in Taiwan max planing width 230mm max planing height 130mm Bedpfx Apjk Ttknobjlh 2 sliding rollers in the tabletop number of spindles 5 motor of the fifth spindle is mounted on the floor feed on cardan shafts with smooth adjustment fully adjustable spindles machine works quietly without vibration, checked in very good condition, chrome tops

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width Bledpforigxyox Apbsh 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment Blsdev Hqn Topfx Apboh electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: excellent (used), functionality: fully functional, Min./max. workpiece height: 15-100 mm Min./max. workpiece length: 500-2000 mm Bsdpfx Apoymn Rcobelh Min./max. workpiece width: 25-230 mm Feed speed: 5-36 m/min

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, feed rate X-axis: 24 m/min, working width: 230 mm, working height: 120 mm, spindle speed (max.): 6,800 rpm, table length: 2,500 mm, TECHNICAL DETAILS Working width: 20-230 mm Working height: 8-120 mm Bedpsw R T Uzefx Apbjlh Spindle speed: 6,800 rpm Feed speed: 5-24 m/min Table length: 2,500 mm MACHINE DETAILS Spindle connection power: 11 kW Number of spindles: 6 EQUIPMENT ATS system with automatic 2-axis positioning for spindle 3 and 4 Mechanical brake for all motors Spindle can be used universally, 360° Note: The U-spindle is not included. A new one costs approximately €5,000.

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Bljdpfxsxz Ax No Apbeh Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Condition: excellent (used), Guilliet KXR four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 5.5kw Bottom 5.5kw Universal 5.5kw Blsdpfen Tph Eex Apbeh Feed rate adjustable on variator 6-27m/min Feed motor 2.2kw Feed on cardan shafts Pneumatic stops Worktop lubrication

Condition: excellent (used), - Number of spindles: 4. - Planing width: max 120 mm. - Planing height: max 100 mm. Blsdpfx Aoygy Tpspbjh - Motor power: typically 4 x 3 kW. - 4 feed speeds - Spindle diameter: 30 mm.

Year of construction: 1989, condition: excellent (used), 8 heads The last universal head. Max planing height 130mm Max planing width 240mm Driven rollers in the table - for wet wood Repeatable heads, two on each side Smooth adjustment of the feed speed Cardan feed Blodemi A Dzspfx Apbeh

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 96123, Connected load 380V 46A planing width 180 mm planing height 120 mm length of table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds electric height adjustment 4x star-delta switch 2x low pressure holder 1x side pressure holder 2x steel feed shafts 1x rubberized pull-out roller Suction connection 4x120 mm Bjdpfsh U Db Iex Apbslh

Condition: repair required (used), Four-Side Planer / Moulder SCM P64 Specification: • Condition: Requires inspection, maintenance and minor repairs • Manufacturer: SCM • Model: P64 • Working width: 180 mm • Working height: 120 mm • Motors for vertical spindles: 1 x 9.0 kW • Motors for horizontal spindles: 4.0 and 5.5 kW • Feed motor: 1.5 kW • Electric adjustment for planing height • Manual adjustment for planing width • 4 spindles, diameter 35 mm • Vertical profiling heads, height adjustable (as in a spindle moulder) • Long infeed table, dimensions 19 x 230 cm • 2 feed speeds (6 and 12 m/min) • Spring-loaded feed rollers • Table lubrication pump • Extraction ports Ø120 mm and Ø150 mm • Weight: approx. 1,110 kg • Overall dimensions: 332 x 113 x 170 cm (L x W x H) Additional information: • The machine requires inspection; it can be started but needs servicing, maintenance, and replacement of bearings, etc. Bodswgdfqjpfx Apbjlh • The attached photos show the actual condition of the machine for sale • Machine available immediately

Condition: good (used), max width of workpiece 230mm max workpiece height 130mm 6 spindles 1) Horizontal bottom 230mm 5.5kW 2) vertical right 130mm + Bsdpfx Aerqzvcspbslh 3) vertical left 130mm; (2nd and 3rd spindle) 11kW 4) horizontal top 230mm 7.5kW 5) horizontal bottom 230mm 7,5kW 6) universal 230mm, adjustable 360° 7,5kW

Year of construction: 1997, condition: excellent (used), max width of the workpiece 23cm max height of the workpiece 18cm Blsdpfx Aok Dxraepbeh 1 lower horizontal spindle 2 right vertical spindle 3 left vertical spindle 4 top horizontal spindle heads adjustable up / down, right / left spindle diameter 40mm Hydraulic side feed on the feeding table

Year of construction: 1985, condition: excellent (used), Planing width 230 mm Planing height 130 mm A set of heads included in the price Smooth feed regulation Elek. lifting Elek. sliding left head Cardan feed Bodpfeh Apqyox Apbolh The order of the spindles - Lower 5.5kW - Right / Left 5.5kW - Upper 5.5kW