Used Press Frame for sale (19,312)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 Fedjcmat Uspfx Aarsfw pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 400,000 kg, Portaalrichtpers 400 ton Model: GANTRY-400T Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder - 100 mm slak per cilinder - Druk 300 kg/cm² Fjdpfxsytkcuj Aarjfw - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: ready for operation (used), total height: 3,550 mm, passage width: 3,000 mm, empty load weight: 25,000 kg, load capacity: 575,000 kg, with 6 oil heated plates, thickness 50 mm (drilled with oil canals) 8 cilinders with a dia each of 150 mm closing time: 24 seconds Ffsdpfx Aeyru Hhoarow Optional: Boiler to heat up oil which is used inside the tables -click here Furnierpressen - Conveyor press - Composit press - Heizplattenpressen Max ram adjustment: 520 mm Max distance between table - ram: 700mm Dimensions of the table: 3000 x 1650mm

Condition: ready for operation (used), total width: 2,600 mm, total length: 3,100 mm, passage width: 1,250 mm, empty load weight: 25,000 kg, Model: HZPUX 150/100-1250/1000 Capacity: 230T Max ram adjustment: 1100 mm Fedpfsyru Hzox Aarofw Max distance between table - ram: 2250 mm Dimensions of the table: 1000 x 1250 mm dimensions stamp: 1000 x 770 mm Electric motor (power): 70 CV Courant needed: 380 V Height: 6200 + 1250 mm

Condition: ready for operation (used), total height: 2,800 mm, total width: 1,800 mm, total length: 4,300 mm, empty load weight: 8,000 kg, Forming press for leather, textiles, hardboard etc... + roller system width 2500 mm Capacity: 50 Ton Max distance between table - ram: 175 mm Ffsdpfxsyru Hbe Aarew Dimensions of the table: 2850 x 1250 mm dimensions stamp: 800 x 800 mm

Condition: ready for operation (used), total height: 2,200 mm, total width: 1,000 mm, total length: 2,500 mm, passage width: 1,570 mm, power: 11 kW (14.96 HP), empty load weight: 2,100 kg, load capacity: 200,000 kg, movable cilinder Max ram adjustment: 300 mm Ffedpjygyxlofx Aarsw Drawningspeed: 9 mm/sec Workingspeed: 5 mm/sec Returningspeed: 10 mm/sec Max distance between table - ram: 760 mm Dimensions of the table: 1570 x 490 mm

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Ffjdoyl A Exepfx Aarjw Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: ready for operation (used), 6-kolomspers met 4 hydraulische zuigers opwaartse slag diameter van de zuiger: 450 mm slag: 550 mm Maximale kracht van 2000 ton max opening zonder verwarmde tafels: 780 mm max opening met verwarmde tafels: 655 mm Verwarmde tafels met stoom of olie Maximale temperatuur: 300° C Totale oppervlakte: 2000 x 2000 mm Twee tafels van 2000 x 1000 mm (kunnen samen of apart gebruikt worden) 2x 11 kW hydraulisch vermogen Fodjv Rwftepfx Aarefw met invoerroltafel: 4260 x 1550 x 1250 mm Olietank op platform: 2000 x 2000 x 2500 mm Totale hoogte van de pers: 3600 mm De pers zit 920 mm in de grond Werkhoogte is 750 mm Toepassingen: - composietmateriaal - vulkaniseren - buigen / strekken

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Ffedpsxc Rbbjfx Aarew Returningspeed: 9,06 mm/sec

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing Ffedsk S Htxjpfx Aarjw - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: new, Year of construction: 2026, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L, built 2026 ----- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal Fedpewg Hr Tefx Aarjfw cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder ...

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Features and technical data: - Electro-hydraulic - Automatic final pressure release and follow-up switching for constant pressure maintenance - Central pressure beam with quick-adjustment cylinder, pressure cylinder, and abutment - Additional horizontal pressure cylinder - Press area approx. 3000 x 2250 mm Fjdpfoyq T Hwex Aarofw - External dimensions 4000 x 2750 x 850 mm - Equipped with 3 horizontal pressure cylinders - Equipped with 2 vertical pressure cylinders - Cylinder stroke 150 mm - Pressure force per cylinder: 2000 kp at 100 bar - Working pump pressure capacity: 100 bar - Support and pressure plate depth: 100 mm - Electric connection: 1.5 kW Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders vertical: 4 Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Machine length: 4000 mm Machine width: 750 mm Ffodpfeiwfhwsx Aarjw Machine height: 2250 mm

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system Fedpfxjdzqmzo Aarjfw - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator Ffodpfx Aash U Dtujrow - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine Ffodpfxsh Uhqys Aarjw - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system - Measuring system for stroke adjustment Ffjdpjhrakvjfx Aarjw - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release Fodpfx Aajv Uraaerjfw (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Ffsdpfsvvkmbox Aarew

Condition: used, NICO DUIN frame press Fjdpfx Aaeytc Snorefw

Condition: excellent (used), Working height 150 cm Working length 600 cm Working width 10 cm, max. 14 cm with clamp 8 cylinders 4 side clamps 1.5 kW motor Dimensions Width 140 cm Height 250 cm Fsdpfsytc Nysx Aarsfw Length 650 cm

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. Fjdpfxsyr Ek Rs Aarsfw C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, pressing force: 51 t, table width: 400 mm, table length: 500 mm, stroke length: 200 mm, input voltage: 400 V, pressing speed: 18 mm/s, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 500 kN (approx. 51 tons) Maximum pressure: 25 MPa Ffjdsyr D R Nspfx Aarow Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 19 mm/s Return speed: 18 mm/s Motor power: 4 kW

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Ffodpfoxrnvbjx Aarew Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the machining of larger components and convenient handling of materials from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and better access to the working area. Fedeyrr Rkopfx Aarjfw Solid steel frame – ensures durability and operational safety. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – suitable for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 1000 kN (approx. 102 tons) Maximum pressure: 25 MPa Maximum opening: 600 mm Stroke: 300 mm Table dimensions: 700 × 500 mm Throat depth: 250 mm Downward speed: 11 mm/s Return speed: 25 mm/s Motor power: 5.5 kW Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.