Used Frequency Dryer for sale (6,508)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0704-47, fuel type: electric, power: 90 kW (122.37 HP), output voltage: 400 V, output frequency: 50 Hz, total length: 10,500 mm, total width: 2,500 mm, total height: 1,450 mm, temperature: 200 °C, This is a contact dryer, which operates using heat applied from below via an aluminum surface as well as from above with hot air. The heating zone is divided into 3 partitions of 2 m each (total 6 m), which can be controlled independently. The dryer also features an adjustable belt vacuum to ensure stable sheet transport. Fpjdpfsxcwn Iex Ah Usp Belt speed is steplessly adjustable from 0.1 to 20 m/min.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Fsdpfx Aewp Rqfeh Uepp Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Dip drawing system with integrated paint dryer Fsdpfx Ahsxvia Ao Ujpp - Manufacturer: Delta Industrietechnik - Year of manufacture: 2015

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,400 kg, loading space volume: 2.78 m³, inner dimension height: 1,500 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Maximum temperature: 190 °C Interior dimensions Internal usable volume: 2.78 m³ Internal dimensions (H x W x D): 1,500 x 1,600 x 1,100 mm Recirculation fan speed adjustable range min.: 50% Recirculation fan speed adjustable range max.: 120% Minimum exhaust air volume flow (exhaust mode): 360 m³/h Reduced exhaust air volume flow (recirculation mode): 90 m³/h Air change rate: 5 times per 300 sec. Total steam chamber volume: 4.5 m³ MACHINE DETAILS Weight: approx. 1,400 kg Filter class: H13 EQUIPMENT S!MPATI software Vacuum connection Fedpjxurx Sjfx Ah Ujpp Cleanroom certification

Condition: good (used), Year of construction: 1999, Refrigeration dryer Fsdpfxsttwzbj Ah Uopp Manufacturer: KAESER Type: TE 121 Year of manufacture: 1999 Rated motor power: 2.1 kW Serviced by Kaeser.

Condition: new, functionality: fully functional, machine/vehicle number: 01.7366034707.0001.16, overall weight: 7 kg, total length: 293 mm, total width: 105 mm, total height: 354 mm, protection type (IP code): IP20, Equipment: type plate available, We are offering the new MDX61B0055-5A3-4-0T/DEH11B/DFP21B, the control head of a state-of-the-art drive inverter series of the Movidrive B series from SEW Eurodrive, which was specially developed for use in demanding industrial applications and is still in its original packaging. Technical features: - Catalog designation: MDX61B0055-5A3-4-0T/DEH11B/DFP21B - Technology version - Rated current: 11.30 A - Modular device design incl. wide range of options - Encoder slot: DEH11B Permitted encoders: Hiperface, sin/cos, TTL - Fieldbus slot: DFP21B, part number 08242402 Profibus DP and DPV1 protocol Fodpfx Ahouitcms Uepp - Built-in options Scope of delivery: The scope of delivery includes the drive inverter MDX61B0055-5A3-4-0T/DEH11B/DFP21B in its original packaging, as well as detailed operating instructions for installation and commissioning, two DVDs with technical documentation and software, a bag of accessory kits MDX B-00/-0T shielding (ref. no. 08246645.10) and another bag with accessory kit MC07A BG2S (ref. no. 08239606.10).

Year of construction: 2021, condition: used, New: No Empty weight: 5 kg Fpedpfxoxubupj Ah Ujp Part suitable for: trucks Type number: 81521086029, 9325103010 TGX Occ luchtdroger MAN OEM : 81521086029, 9325103010 Article nr.: J100010035-veiling Used air dryer MAN

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. for sale brand new dryer old stock (2019) includes two brand new filters. Fedpfsu Rpg Tsx Ah Uspp capacity : 324 M3/H height : 1285 mm width : 620 mm depth : 571 mm weight: 165 kg connection: 1" 1/2 tested and ready for use.

Condition: used, Year of construction: 2016, Power: 11 kW (15 HP) // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) – Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% – 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L – EN 1.4404 Vacuum seals: PTFE and FEP Fpedpfx Aoxn Az Reh Uep Jacket material: AISI 304 – EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit – AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar – Jacket temperature: 142°C – Surface area: 1.65 m² Cooler, mounted on the heater: cold water or brine – Pipe jacket pressure: 12 barg – Jacket temperature: 142°C – Pipe temperature: -10°C /+ 99°C – Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, machine/vehicle number: 05-96, MASPELL DRYER TYPE PRESS M: Wood capacity: 1.6 m3 Hot water heating system, Fodpjxuv Nnofx Ah Uspp New heating element, 5 plates of 1000 x 5000, Stainless steel chamber dimensions: 6000 x 1700 x 1000

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Lenze, Control Unit Powerlink -Type: i550 see photo type plate -Input: 1/N/PE 230/240V AC 50/60Hz 5.7A -Output: 0-230/240V AC 0-599Hz 2.4A 0.37kW -Number: 1x frequency converter available Fpedpfxoxn If Ij Ah Uop -Dimensions: 185/60/H135 mm -Weight: 0.8 kg.

Condition: new, functionality: fully functional, machine/vehicle number: 01.7366034706.0001.16, overall weight: 4 kg, total length: 249 mm, total width: 95 mm, total height: 374 mm, protection type (IP code): IP20, Equipment: type plate available, We are offering the new MDX61B0011-5A3-4-00/DFP21B, a state-of-the-art drive inverter from SEW Eurodrive's renowned Movidrive series, which is still in its original packaging and has been specially developed for use in demanding industrial applications. Technical features: - Catalog designation: MDX61B0011-5A3-4-00/DFP21B - Standard version - Rated current: 2.80 A input / 3.10 A output - Wide mains voltage and power range: 3x AC 380 V - 500 V: 0.55 kW - 315 kW - Flexible use with synchronous and asynchronous motors - Safe Torque Off (STO) EN ISO 13849-1 PL d - Modular device design incl. wide range of options Fieldbus interfaces Encoder interfaces Built-in options for functional safety technology Input/output expansions - Fieldbus slot: DFP21B, part number 08242402 Profibus DP and DPV1 protocol Fedpfxjuitalj Ah Ujpp Scope of delivery: The scope of delivery includes the drive inverter MDX61B0011-5A3-4-00/DFP21B in its original packaging, as well as detailed operating instructions for installation and commissioning, a DVD with technical documentation and software and an accessory kit MDX BG0 (ref. no. 08245479).

Year of construction: 2017, condition: used, New: No Empty weight: 5 kg Fsdpfx Ahoxubq Dj Uspp Part suitable for: trucks Type number: 1889796, 4728900500 R Occ ECAS ELC4 magneetventiel Scania OEM : 1889796, 4728900500 Article nr.: J100006047-veiling Used ECAS ELC4 solenoid valve Scania

Condition: used, Year of construction: 2013, Compressed air refrigeration dryer Model: MG 110 Year of construction: 2013 Air volume flow 6,600 m³/h or 110.0 m³/min Nominal power: 8.99 kW Fsdpfju Rn Trex Ah Ujpp The air dryer is functional and was regularly serviced and checked until it was decommissioned

Condition: used, Year of construction: 1992, 4 motor grinding spindles (liquid-cooled, purge air / oil mist lubrication) including the REFU HF frequency converter, e.g. for supplying the spindles of a Voumard 400 CNC T4. Fpsdpfx Aol Tn Afoh Uep Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-150 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter for supplying the motor spindles GMN tool spindle A bundle of various grinding spindle shafts / holding arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request Subject to errors and typographical mistakes in all technical data. We sell exclusively to countries within the European Union.

Condition: used, different typesmore information under Download Fsdpfx Ahedc A Rqo Ujpp

Condition: good (used), Year of construction: 2020, Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Lenze, frequency inverter Inverter Profinet -Type: I55AE175F1AV1000LS -Max. power: 0.75 kW -Input: 3/PE AC 400/480V 3.3/2.8A 50/60Hz -Output: 0-400/480V 2.4/2.1 A 2.2 kW 0-599 Hz -Number: 6x inverters available -Price: per piece -Dimensions: 130/60/H210 mm Fpodjxn Ia Sopfx Ah Ujp -Weight: 1.1 kg/piece

Condition: new, functionality: fully functional, machine/vehicle number: 01.7366034705.0001.16, overall weight: 3 kg, total length: 249 mm, total width: 82 mm, total height: 374 mm, protection type (IP code): IP20, Equipment: type plate available, We are offering the new MDX61B0005-5A3-4-00/DFP21B, a state-of-the-art drive inverter from SEW Eurodrive's renowned Movidrive series, which is still in its original packaging and has been specially developed for use in demanding industrial applications. Technical features: - Catalog designation: MDX61B0005-5A3-4-00/DFP21B - Standard version - Rated current: 1.80 A input / 2.00 A output Fjdjuitb Njpfx Ah Uepp - Wide mains voltage and power range: 3x AC 380 V - 500 V: 0.55 kW - 315 kW - Flexible use with synchronous and asynchronous motors - Safe Torque Off (STO) EN ISO 13849-1 PL d - Modular device design incl. wide range of options Fieldbus interfaces Encoder interfaces Built-in options for functional safety technology Input/output expansions - Fieldbus slot: DFP21B, part number 08242402 Profibus DP and DPV1 protocol Scope of delivery: The scope of delivery includes the drive inverter MDX61B0005-5A3-4-00/DFP21B in its original packaging, as well as detailed operating instructions for installation and commissioning, a DVD with technical documentation and software and an accessory kit MDX BG0 (ref. no. 08245479).

Condition: new, Year of construction: 2022, functionality: fully functional, NEW GOODS Fodjxqbxtjpfx Ah Uepp

Condition: excellent (used), Year of construction: 2013, Screen printing dryer Acosgraf Infradryer TS3010 perfect for plastisol inks, quick curing 350-500 pieces an hour Fsdpfxjxtwtxj Ah Uopp Low energy consumption year 2013 27kw air circulation exhaust blower 3 different heating zones belt 100cm wide heat length 3 meters Très bon état

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 Fpsdsxn Nlvspfx Ah Uep - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight Materials: stainless steel Filter area: 6.4 m² Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Extraction screw Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Full technical documentation (paper and digital versions) Fpsdpfx Ahjxnc Nhe Uep Electrical cabinet

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter, Movidrive -Manufacturer: SEW Eurodrive, Movidrive inverter type MDX91A-0020-5E3-4-XXX -Power: 0.55 kW/1.4 kVA -Input: 3x 380- 500 V 50/60 Hz -Output: 0-599 Hz -Control head:Type: MDX91 A-0020-5E3-4-T01/CFN21A -Dimensions: 350/95/H210 mm Fpsdpfx Aexnw Tzoh Uep -Weight: 4.1 kg

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 32 -Type: ATV320U11N4B -Power: 7.5 kW -Input: 380-500V / 50/60Hz / 5 A -Output: 380-480V / 0-599 Hz / 3 A -Quantity: 1 frequency converter available Fpodpsxnlwusfx Ah Uop -Dimensions: 320/45/H230 mm -Weight: 1.7 kg

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Schneider Electric, frequency converter Altivar 32 -Type: ATV320U30N4B -Power: 3 kW -Input: 380-500V / 50/60Hz / 11.1A -Output: 380-480V / 0-599 Hz / 7.1 A Fsdpfx Aoxnlvqjh Ujpp -Number: 2 frequency converters available -Price: per piece -Dimensions: 320/60/H230 mm -Weight: 2.1 kg/piece