Used Friction for sale (274)

Condition: used, mileage: 674,000 km, first registration: 05/2020, fuel type: diesel, fuel: diesel, Year of construction: 2020, DAF XF 530 FT 3-axle Euro 6 SuperSpaceCab (SSC) MEGA/LOW semi-trailer with MEUSBURGER 4-axle gooseneck flatbed trailer for special transports, up to 5 m wide DAF tractor unit features: • Euro standard: EURO 6D • Power: 390 kW / 530 hp • Engine displacement: 12,902 cm³ • SuperSpaceCab (SSC) cab • ZF Intarder • AS-Tronic 12-speed automatic transmission • Brakematic • ABS/ASR/EBS • EBV • ESTEPE (2nd axle): Leading/Steering/Lift axle! • Adaptive cruise control • Lane departure warning system • Brake assist system • Collision warning system • BRIGADE turning assistant • Differential lock • TC traction control • Hill start assist • Full air suspension • Cab spoiler • Automatic climate control • Auxiliary heater • Navigation system • TV • Microwave • CB radio • Multifunction steering wheel • Driver airbag • Leather seats • Driver and passenger comfort seats • 2 bunks • Stainless steel diesel tank: 600 liters • Tire size: 1st axle: 355/50 R22.5 2nd axle: 235/75 R17.5 Ijdpfjzyz U Hex Ap Detn 3rd axle: 295/60 R22.5 • Tire tread depth: 13/13 8/8 10/11/10/11 mm • Wheelbase: 3,800 mm • Unladen weight: 9,120 kg • GVWR: 23,900 kg • Technically possible gross combination weight: 50,000 kg / 68,000 kg • Vehicle dimensions (external): 6,200 x 2,550 x 3,950 mm MEUSBURGER - Special trailer • Year of manufacture 2016 • Trailer can be widened to 5 meters electrically and pneumatically • No vehicle hydraulics required - the vehicle has an electro-pneumatic pump! • Internal height: 3,250 mm (3,730 mm possible!) • External dimensions: 13,810 x 2,550 x 4,000 mm • Internal dimensions: 13,480 (gooseneck 3,480 mm + low bed platform 10,000 mm) x 2,490 x 3,250 mm • EDSCHA tarpaulin • Electric/hydraulic lift roof • Anodized/galvanized frame! • Sliding lashing points • 2 x lashing rail on the side • 2 x lashing rail in the middle • 2 x 9 folding lashing rings on the side on the low bed • 2 x 4 lashing rings in the gooseneck • 4 x twin-tired and air-suspended BPW - ECO PLUS axles • Electrically steerable • Disc brakes • Aluminum rims • 1st axle can be lifted • 3rd + 4th axles are steerable - friction-steered! • Tire size: 205/65 R 17.5 • Tire tread depths (per axle): 10/10/11/10 ; 10/7/11/10 ; 6/6/10/11 ; 9/10/8/7 mm • BEKA central lubrication system • GVWR: 38,800 kg • Unladen weight: 11,250 kg • Payload: 42,000 kg - German vehicles! - SERVICE BOOK KEPT UP TO DATE: all services performed at DAF!! - 1st owner! - TÜV/MOT inspection and emissions test on request and for an extra charge: new! Errors and prior sale excepted!

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Turnover module also available optional. Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - 1x AS2 shuttle feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder Itjdpfx Aozv Tizjp Den - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Year of construction: 1972, condition: used, functionality: fully functional, machine/vehicle number: TRFA12+14x, 1x Demag friction wheel drive travel drive for rope hoist crane hoist P-train bridge crane etc Stock from years of construction 1971 + 1976: 14x RF310 - motor type 16/6KF8-2 0,15-0,6KW 5m/25m/min price 2850.- / pc. 12x RF400 - motor type 19/11KF12-2/2 0,18-1,1KW 6,3m/40m/min Price 3650.- / pc. with 2 speeds Complete with tension clamps, motor/gearbox and friction wheel We can also overhaul defective, porous friction wheels for you and have new ones made - please enquire. Weight complete approx. 100-150 kg, connection to 380V 50Hz Used condition Item location is 75053 Gondelsheim Isdpfxst Rtm Nj Ap Dotn See pictures

Condition: new, Year of construction: 2023, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, path measurement accuracy: 2 mm, overall weight: 435 kg, travel speed (max.): 30,000 mm/min, compressed air connection: 5 bar, Equipment: documentation/manual, type plate available, The COORD3 Benchmark 06.05.05 is a high-quality, CNC-controlled portal measuring machine (half-gantry type) designed for accurate 3D product inspection. The machine combines a stable mechanical structure with high measuring speeds, making it suitable for use in both temperature-controlled measuring rooms and controlled production environments. 𝗘𝘅𝗰𝗲𝗹𝗹𝗲𝗻𝘁 𝗰𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻 (𝗗𝗲𝗺𝗼𝗻𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻 𝗺𝗼𝗱𝗲𝗹): This CMM is in near-new condition. The machine has only been used as a demonstration model and therefore has seen very little use. There is no production wear, meaning the system is in absolute top condition, both mechanically and electronically. 𝗛𝗶𝗴𝗵 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝘃𝗶𝘁𝘆 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗣𝗛𝟮𝟬 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗵𝗲𝗮𝗱: The machine uses the advanced Renishaw PH20 probe head. This head uses ‘head touches’ (fast pivoting movements of the head itself) instead of moving the entire machine axes. This results in a measuring cycle that is up to three times shorter compared to traditional systems. 𝗛𝗶𝗴𝗵 𝘁𝗵𝗲𝗿𝗺𝗮𝗹 𝘀𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆 (𝟭𝟲 - 𝟮𝟲 °𝗖): Thanks to the optional multi-sensor temperature compensation system, the machine maintains its accuracy over a wide temperature range. This makes the CMM suitable for use near the production line without requiring a strictly temperature-controlled environment. 𝗗𝘂𝗿𝗮𝗯𝗹𝗲 𝗮𝗻𝗱 𝘀𝘁𝗮𝗯𝗹𝗲 𝗳𝗼𝘂𝗻𝗱𝗮𝘁𝗶𝗼𝗻: The machine bed consists of a solid granite table with integrated guides (flatness according to DIN876/III). Because all axes are equipped with air bearings, there is no mechanical friction or wear, which guarantees long-term repeatability. Isdpfxez Eh T Rj Ap Detn 𝗖𝗼𝗺𝗽𝗮𝗰𝘁 𝗮𝗻𝗱 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻: The CNC controller and the PC are integrated into the machine's base. This saves valuable floor space in your workshop or measuring room. The monitor and keyboard are mounted on a flexible, pivoting operator arm. 𝗠𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗿𝗮𝗻𝗴𝗲 𝗮𝗻𝗱 𝗰𝗮𝗽𝗮𝗰𝗶𝘁𝘆: The effective measuring volume is 600 mm on the X-axis, 500 mm on the Y-axis, and 470 mm on the Z-axis (reduced from 500 to 470 mm due to the physical design of the PH20 head). The robust granite table is designed to support heavy workpieces with a maximum product weight of up to 300 kg. 𝗛𝗶𝗴𝗵 𝘁𝗿𝗮𝘃𝗲𝗿𝘀𝗲 𝘀𝗽𝗲𝗲𝗱 𝗮𝗻𝗱 𝗱𝘆𝗻𝗮𝗺𝗶𝗰𝘀: The machine is equipped with a powerful NC drive via DC motors with backlash-free friction drive on steel guides for all axes. This results in an impressive maximum positioning speed of 30,000 mm/min (500 mm/s) and a maximum acceleration of 1500 mm/s², allowing measuring programs to be executed with minimal pauses. 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗲𝗱 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗮𝗰𝗰𝘂𝗿𝗮𝗰𝘆: The machine's performance has been fully verified according to the strict international UNI EN ISO 10360-2 standard. With the PH20 measuring head, the system guarantees a path measuring accuracy (MPE) of 2.7 + 3.0L/1000 µm under optimal conditions (18-22 °C), and a maximum repeatability accuracy (MPL) of 2.5 µm. The maximum form measuring error of the probe (MPE PFTU) is 2.7 µm. 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: For the commissioning of this CMM, a stable compressed air supply is required with a minimum pressure of 5 Bar (71 PSI) and a constant air consumption of 90 Nl/min. The electrical installation is very simple and requires a standard single-phase power supply of 230 V (±10%) at 50 Hz. The total machine weight, including the base, is 435 kg (excluding PC peripherals).

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,632 h, load capacity: 1,200 kg, lifting height: 4,150 mm, free lift: 1,554 mm, fuel type: electric, mast type: triplex, construction height: 1,979 mm, fork length: 1,300 mm, drive type: Elektro, High-lift pallet truck Load center: 600 Mast type: Triplex Condition: Refurbished without warranty Isdpfxoyczhye Ap Dstn Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are non-binding, ex-stock, plus freight and VAT. No warranty/guarantee and no returns. Inspection available by appointment. Our General Terms & Conditions apply. Pedestrian-operated, includes Sensilift and creep speed, plexiglass finger guard, horn, PIN code, single polyurethane fork rollers, drive wheel Friction, support wheel Vulkollan, mid-position battery compartment with plastic cover.

Condition: like new (used), machine/vehicle number: MV-600E/NC, functionality: fully functional, pressing force: 600 t, operating speed: 5 mm/s, reverse speed: 18 mm/s, table width: 990 mm, table length: 890 mm, overall weight: 23,000 kg, Equipment: documentation/manual, safety light barrier, The MV-600E/NC four-column hydraulic press belongs to the M/NC series and is custom-designed to achieve greater precision and capacity, specifically manufactured for stamping, deep drawing, punching, and deburring tasks. Power tn 600 Motor Power 40 HP a 440 Vca / 60hz Working Speed mm/s 5 Approach Speed mm/s 15 Return Speed mm/s 18 Piston Stroke mm 1.015 mm - (40”) Guide Diameter mm 200 Table Usable Area mm 990 x 890 x 130 (39” x 35” x 5”) Between Columns mm 990 x 370 Vertical Clearance mm 1.625 - (64”) Working Height mm 990 - (39”) Lower Hydraulic Knockout Tn 80 Lower Knockout Stroke mm 406.4 - (16”) Upper Hydraulic Knockout Tn 80 Upper Knockout Stroke mm 406.4 - (16”) Total Frontal mm 1.850 Total Lateral mm 1.700 Total Height mm 4.500 Weight Kg. 23.000 Kg. approx. Equipped with a top and bottom table made of C45E steel, machined with DIN-650 slots, and a removable upper counter-table of 990 x 890 x 130 mm for die holders with “T” slots. We ensure minimal friction in the vertical movement of the top table through the installation of maintenance-free bimetallic bushings, with perfect parallelism achieved by four chromed and ground cylindrical columns. It uses an optimized hydraulic system with a pressure of 320 Bar, ensuring prolonged durability and reliability in its performance. It meets and satisfies all essential safety and health requirements according to CE regulations. Isdpfewpggisx Ap Dstn STRUCTURE AND TABLES • Consists of three electrowelded blocks made exclusively of S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Incorporates a SIEMENS SIMATIC S7 1200 PLC and a 7” HMI KTP-700 touch panel. This allows programming of the power, cylinder stroke, and speeds, with a storage capacity of 300 memories for different work cycles. CYLINDER AND HYDRAULIC GROUP • Double-acting cylinder with lapped sleeve, chromed piston, and maintenance-free anti-wear guides. • Motorized hydraulic group with two speeds and automatic disconnection of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A pressure switch located on the side allows the most appropriate pressure setting for each type of work. • Glycerin manometer with reading in tons. ELECTRICAL INSTALLATION AND SAFETY • The electrical panel incorporates a selector to choose manual, semi-automatic, or automatic operation modes, and another selector for fast or slow speed operation. • Equipped with a PLC to internally assist with maneuvers and decompression time. • Operation is carried out using a low-voltage electric two-hand button panel. • Electrical and hydraulic maneuvers are redundant and self-controlled, incorporating an additional safety block and self-control devices for maneuvering and safety. Includes verification and certification of proper operation and safety distance for photocells. • For safety, category IV photoelectric barriers are incorporated in the front work area, two fixed side protections, and a movable protection with a magnetic disconnection detector at the rear. • Machine equipped with an IXON system for online communication in case of faults or reprogramming. • Ladder with upper walkway for repair access (scaffold).

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Ijdpfjwhu Hhsx Ap Dstn Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Iodpfxjx Ez Ums Ap Dstn Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 26/2632, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1. Pelletizing press, brand: Paladin 1600-210 Internal diameter of the die: 850 mm Die surface: 210 mm The press is equipped with 2 motors, each with 90 kW and a speed of 1500 rpm. The press door is made of stainless steel and has an overload valve. 2. Roll press with 2 rolls on the press, refurbished with a drilled or ribbed design. The press is complete with a die lifting device and tools. New rear plate for the 2 rolls. The press has been completely refurbished and fitted with new bearings and wear parts, such as front and rear sliders, die adjustment ring, etc. Also includes new V-belts and toothed belt. All safety features will be taken into account, and appropriate switches will be installed. Friction protection, door switch, and inspection hatches will be mounted. Refurbished pump unit for friction and V-belt tension. Itedpfx Apsq U R N To Dsn Note: Conditioner on the press is an optional extra.

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Iedpsxl Eltsfx Ap Djtn

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Equipment: CE marking, documentation/manual, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. Itedpfjwnx Agex Ap Don The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard Isdpozcqziofx Ap Detn - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,342 h, load capacity: 1,200 kg, lifting height: 2,700 mm, free lift: 166 mm, fuel type: electric, mast type: duplex, construction height: 1,840 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load centre: 600 Mast type: Duplex Condition: Refurbished, no warranty Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no returns. Viewing by appointment possible. Our general terms and conditions apply. With pedestrian tow bar, standard hydraulics, PIN code, plexiglass finger guard, single polyurethane fork rollers, friction drive wheel, premium support wheel, medium-size battery compartment. Isdpfxoyczh Hs Ap Dstn

Condition: used, mileage: 22,000 km, power: 353 kW (479.95 HP), first registration: 06/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #348 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 MAN TGS 26.480 chassis * 6x2 - 4BL * TipMatic with OMSI * 470PS/346KW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm Itsdpfx Apex Rv Rao Djn * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods.

Condition: used, MDR 2000 Moving Die Rheometer • Closed, bic conical chamber system • Fast microprocessor for temperature control • Torque measurement via friction-free torque transducer • High precision, high efficiency • Automation option for maximum productivity State-of-the-art vulcanization technology The MDR 2000 Moving Die Rheometer from Alpha Technologies has become the global standard for vulcanization technology. Two directly heated, bic conical tool halves with low mass provide fast and accurate temperature recovery. The oscillating lower tool half eliminates the need for a rotor, as in the Oscillating Disk Rheometer (ODR 2000). This results in faster temperature recovery and greater data accuracy. The resulting torque is measured by a torque transducer in the upper tool half, ensuring that friction forces from bearings and seals no longer affect the torque measurement. The torque signal is calibrated using a torsion spring rod with known values. This ensures long-term accuracy, repeatability, and reproducibility of the data. The unique closed chamber system enables above-average reproducibility and sensitivity to variations in the compound. Fast-responding temperature control is ensured by an optimized system. These properties, combined with a highly sensitive torque transducer and state-of-the-art microprocessor technology, offer the best in networking technology. Itedpszul Dbjfx Ap Djn

Condition: used, Used Machine Features and Technical Specifications: - High-performance multi-blade saw - Heavy-duty cast iron construction - Robust feed chain consisting of precision links connected directly to one another - Wear-resistant guide surfaces on the feed chain with an extremely low coefficient of friction - Automatic chain lubrication - 4-point saw shaft bearing arrangement for maximum stability - Saw sleeve with tapered seat and self-centering mechanism - 4 pressure rollers for precise cuts even with thin workpieces - 4 rows of slitter and deflector fingers - Cutting height up to 110 mm with a 350 mm saw blade diameter Iodpfx Apozk N Ucs Djtn - Minimum cutting length 250 mm - Clamping width of the saw sleeve: 300 mm - Min. and max. saw blade diameters: 200/350 mm - Saw shaft speed: 4,200 rpm - Feed speed: 4–48 m/min - Conveyor chain width: 300 mm - Saw bush diameter (with 2 wedges, 20 x 5 mm): 70 mm - Work table height: 750 mm - Exhaust connection diameter: 200 mm - Airflow at 25 m/sec: 3,500 m³/h - Motor: 25 kW - Feed motor: 1.1 kW - With laser alignment beam - Sound emission: 98.3 dB(A) at idle without dust extraction - During operation: 107.1 dB(A) - Workplace-specific emission level: 81.8 dB(A) at idle without dust extraction - During operation: 91.2 dB W(A) - Dimensions: 170 x 140 x 190 cm - Weight: 1,800 kg

Condition: used, mileage: 272,250 km, power: 324 kW (440.52 HP), first registration: 06/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, Year of construction: 2012, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #480 MAN TGS 26.440 6x2 with KROLL High-Pressure Jetting and Suction Body with Water Recovery WRS2 Body KROLL Fahrzeugbau-Umwelttechnik GmbH * Type K 1.0-13.0/29 P * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm * Tank material: S355J2+N (St. 52.3) * Water recovery system * Telescopic piston with 3 locking positions * EMPTYING: via pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for returning dirty water through the boom into the sewer. * Water compartments on the sides Chassis MAN TGS * 26.440 6x2 * manual transmission * EURO 6 * Fuel capacity approx. 400 l * Driver’s cab color: Municipal Orange RAL 2011 * 2x LED beacon lights on the cab * Reversing camera * Air conditioning Vacuum system CVS WR 3100, approx. 2,465 cbm/h at 400 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch from the vehicle engine’s PTO. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm High-pressure system Uraca P 3-45, approx. 345 l/min at 205 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch. * Large HD hose reel for 240m 1" DN 25, swivels 180° * Equipped with approx. 200m DN25 * Small HD hose reel for 80m DN 13, hydraulically operated * Equipped with approx. 60m DN13 Special features - hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of suction hose via hydraulic roller guide carriage * Suction hose boom, hydraulic operation and telescopic, swivels 180° * KROLL water recovery WRS2 * Water spray gun * LED beacon lights * LED work area lighting * Work functions remotely operated via CAN-BUS technology * Radio remote control * Reversing camera with 7" color monitor * Soundproof enclosure in pump area * Large tool and hose storage boxes * Toolbox * Holder for traffic cones * Vice * Pulley for banana/guide device * Large advertising boards on right and left Iedpfxowwf S Te Ap Dotn For further detailed information and/or photos, please contact us directly. You can find a wide selection of further vehicles for PURCHASE or RENTAL at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively pursuant to our general terms and conditions and under exclusion of any warranty. Special equipment: Front axle load 9.5 t, elevated exhaust pipe on right, co-driver bench seat, rear axle differential lock, ETA circuit breaker, flame-start device, heavy-duty roll stabilization, automatic climate control, trailing axle NOL-08 steered, liftable, PTO NMV221, beacon (2), external sun visor, fleet management system control module, reinforced front axle shock absorbers, preparation for engine start/stop system at end of frame.

Condition: ready for operation (used), Year of construction: 1999, B&R Moll Marathon Folder Gluer / Pocket Folder - ‘Dial-a-Feed’ hopper-type friction feeder with belts - ‘Quadraplex’ glue control unit with 4 channels for up to 4 gluing heads, featuring electronic cut-off control - Tape dispenser - Infeed table with plough folding devices and guides - Valco pre-melt unit with 2 heated hoses and hot-melt gluing heads - Upper and lower buckle plate folding station with segmented rollers - ‘Dial-a-Stack’ compression stream delivery conveyor - Includes accessories and manuals. Iodpozgfzdsfx Ap Dstn

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Itsdpfx Apow D Uggs Djn

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder Itsdpfoq Eg Hnex Ap Den - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 14,000 cycles per hour

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Itjdpfx Apevtpp Ns Djn Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 16,200 mm, loading space width: 2,750 mm, loading space height: 960 mm, total length: 16,200 mm, total width: 2,750 mm, suspension: hydraulics, tire size: 235 / 75 R17.5, color: blue, Year of construction: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailers Year: 2009 Brand: Goldhofer Additional information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King-Pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg GVW: 106,000 kg Empty weight: 23,480 kg Loading capacity: 82,520 kg Axles Brand axles: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle friction steering 2nd axle rigid Axles 3 to 8 hydraulic steering Axle 1 & 2 liftable Tyres: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Max extended length: 24,500 mm Loading floor length: 12,300 mm to 20,600 mm Loading floor width: 2,750 mm Loading floor height: 955 mm King-Pin height: +/- 1,280 mm Additional Information Operated on truck hydraulics Hydraulic operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox in gooseneck King-pin 3.5” Central greasing Markerboards oversize load Radio remote control = Further information = General Information Year of manufacture: 2009 Axle configuration Tire size: 235 / 75 R17.5 Isdpfxewwkrlj Ap Detn Axle brand: BPW Suspension: hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tires; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 6: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 7: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 8: Twin tires; Max. axle load: 10,000 kg; Steered Weights Empty weight: 23,480 kg Payload: 82,520 kg GVW: 106,000 kg Functional Loading floor height: 96 cm Extendable structure: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 54 kg, total length: 489 mm, total width: 390 mm, total height: 454 mm, power: 3.6 kW (4.89 HP), input frequency: 60 Hz, TAWI's powerful vacuum pump is engineered for heavy lifting tasks where reliability and high performance are critical. The direct-drive design reduces friction and wear, ensuring minimal downtime and a stable, efficient vacuum capacity—ideal for demanding industrial and logistics environments. - High Performance: Stable vacuum power for heavy lifting using TAWI vacuum lifters VM60–270 (VM160–300). - Direct-Driven Pump System: Reduced friction and unnecessary wear result in a longer service life and fewer maintenance requirements. - Dual-stage Side Channel Blower: Air-cooled design minimizes overheating risk and improves operational stability. - Energy-Efficient IE3 Motor: Reduces energy consumption and operating costs. Iodpfxeytq D So Ap Dotn - Optional Sound-Absorbing Hood: Lowers noise levels in the work area. - Robust Industrial Construction: Designed for long-term operation with minimal downtime. - Noise Level: Typically 71–73 dB(A) depending on model. - Protection Class IP55: Suitable for industrial environments.

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 200 mm Itjdpfxezq Hiqo Ap Den Length of the planing table 2500 mm Feed speed 6-36 m/min. Dimensions (L/W/H) 4900x1700x2000 mm weight of the machine ca. 3500 kg Control SCM Mobile 10 SCM Superset NT PLUS Comp. 31 for window production ----- The machine is in process of partial reconditionning at our facility at the moment. Highlights: - Machine with 6 spindles (2 with HSK mounting) - Spindle speed 8,300 rpm - Working width 240 mm, working height 200 mm - Electronic horizontal and vertical spindle positioning - PRL equipment for glazing bead separation - Air-cushion table - Touchscreen control Technical Data: Working width: max. 240 mm (kit for min. width 15 to 25 mm) Working height: max. 200 mm Feed speed: infinitely variable 6 to 36 m/min via inverter Infeed table: length 2,500 mm Machine weight: approx. 3,550 kg Dimensions: length 4,900 mm / width 1,700 mm / height 1,700 mm 1st Spindle: _____ First bottom spindle, horizontal (jointer/planer) Motor with brake, 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Tool Mount (HSK): _____ First right tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system Electronic vertical and horizontal positioning 3rd Tool Mount (HSK): _____ First left tool mount, vertical Motor with brake, 7.5 kW Speed: 8,300 rpm HSK 85S quick-change system with pneumatic unit Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 4th Spindle: _____ First top spindle, horizontal Motor with Brake 11 kW Speed ??8,300 rpm Electronic horizontal positioning Electronic tool diameter adjustment (setup) 5th Spindle: _____ Second horizontal top spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter adjustment (setup) 6th Spindle: _____ Second horizontal bottom spindle Motor with brake 7.5 kW Speed ??8,300 rpm Electronic vertical and horizontal positioning Additional technical features: _____ - 2 feed units following the top spindles to reduce the axis spacing from 620 mm to 450 mm (for short workpieces) - Driven, motorized feed roller integrated into the machine table - Pneumatic hold-down pressure before the jointing spindle (can be deactivated from the control panel) - Pneumatic feed deactivation for the final unit following the 2nd bottom spindle; operable even when the sound enclosure is closed - Pneumatic "TTL" pressure elements before the first horizontal top spindle - Air-cushion lubrication in the machine table to minimize friction - Manual lubrication pump for the machine table - Central lubrication system for guideways and controlled axes - 5 x electronic horizontal positioning (positions 2 – 3 – 4 – 5 – 6) - 4 x electronic vertical positioning (positions 2 – 3 – 5 – 6) - 3 x electronic tool diameter adjustment (setup) Positions (3 – 4 – 5) - Mobile 10 control system - PRL equipment (Glazing bead package) for cutting out the glazing bead - Soundproofing and safety enclosure with electromagnetic interlock (CE standard) Dust ...

Condition: used, mileage: 20,000 km, power: 353 kW (479.95 HP), first registration: 11/2025, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Internal number: #568 Mercedes Benz Arocs 2548 6x2 L with KROLL High-Pressure Flushing and Suction Pressure Tank Superstructure ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2548 6x2 L is equipped with a premium KROLL high-pressure flushing and suction pressure tank superstructure of ADR class L4BH. Featuring a telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and full CAN-BUS control, the vehicle delivers maximum performance for sewer, industrial, and hazardous goods operations. Body * KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Sliding piston with 3 locking positions * (3,300l water/10,600l sludge, 5,500l water/8,200l sludge, 7,700l water/6,000l sludge) * Suction from open water possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR – type class AT/FL L4BH * DISCHARGE: via pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for returning dirty water via the boom into the sewer * Manhole DN500 Chassis – Mercedes Benz Arocs 2548 L * 6x2 * Automatic transmission * 480 hp / 350 kW * EURO 6e * Fuel volume approx. 350 l * Cab color MB9147 Arctic White * 2x LED beacon lights on cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 m³/h at 400 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch from PTO * Approx. 20 m HP hose DN 125 * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm * Additional suction hose reel with through-suction, rear right, approx. 30 m DN75 suction hose High-pressure system * Uraca KD 718 G60 approx. 315 l/min at 170 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch * Approx. 240 m HP hose DN 25 * Large HP hose reel for 240 m 1" DN 25, 180° swiveling * Fitted with 160 m DN25 (rubber hose) * Small HP hose reel for 60 m ?? DN 13, hydraulic * Fitted with 60 m DN13 (rubber hose) Features of the hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Boom arm for suction hose hydraulically adjustable, telescopic, and swiveling 180° * ADR version L4BH type class FL including EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED perimeter lighting * Remote control of work functions via CAN-BUS technology * Remote control with 14 functions * Hand wash unit (warm) * Rear view camera * Acoustic enclosure in front of pump compartment * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising boards left and right * Scrap box Technical Data GVW 26,000 KG * Unladen weight approx. 18,760 KG * Length approx. 9,280 mm * Height approx. 3,820 mm * Width approx. 2,550 mm * Wheelbase 3,900 mm Conclusion An excellently equipped Mercedes-Benz Arocs 2548 with KROLL combination superstructure, telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and ADR L4BH. The ideal solution for sewer service contractors, industry, municipalities, and service providers seeking a powerful, ready-to-use professional vehicle. For further d Ijdpfxjx Egyfs Ap Dotn