Used Fruit Juice for sale (823)

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Kjdpfx Anstu Ikcjyjlu Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Condition: new, Year of construction: 2026, The fruit washer for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. Initially, the fruits are immersed in water for thorough pre-cleaning. Afterwards, they are transported further via the conveyor belt and carefully cleaned with fresh water. Technical Information • Capacity: 1000 kg/h • Power requirement: 0.75 kW, 230 V, 6 A Kodpev Srp Aofx Anyolu • Material: WNr. 1.4301, AISI 304 stainless steel • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • High-quality workmanship • Equipped with rollable wheels • Low maintenance requirements Dimensions: Length: 2915 mm Width: 840 mm Height: 2270 mm

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean Klsdpfjv Srguex Anysu • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 820 h, total length: 3,158 mm, total width: 890 mm, construction width: 1,103 mm, I have several Fam Mantis machines for sale – slicers with low operating hours and a capacity of over 4 tons per hour. Each machine comes with a head. The listed price is net and applies to one Mantis unit. Ksdpfewyczwox Anyolu

Year of construction: 2011, condition: ready for operation (used), We offer the KRONEN TONA RAPID 145 slicer, year 2011 – a professional machine for efficient and economical cutting of fruit and vegetables. The device is ideal for processing apples, tomatoes, carrots, onions, potatoes, kiwis, pears, mushrooms, citrus fruits, and many other products into segments (quarters), slices, and sticks. Cutting is carried out without the use of water, thanks to which the raw material retains its natural appearance, structure, and taste, and the plant reduces media consumption and the amount of wastewater. The machine achieves up to 1800 strokes per hour, which translates into approximately 3600 pieces of product/hour (depending on the raw material and type of cut). This makes the KRONEN TONA RAPID 145 ideal for use in fresh fruit and vegetable processing plants, salad and ready-to-eat meal production facilities, as well as in the HoReCa and industrial catering industries. The compact design and ergonomic feed height of 900 mm ensure comfortable operation for the operator and easy integration of the machine into the existing production line. Technical data: Manufacturer: KRONEN Model: TONA RAPID 145 Type: 145-1002 Year of manufacture: 2011 Power supply: 230 V, 50 Hz, 1 phase Klsdpfxjymbd Ns Anyju Installed power: 0.6 kW Capacity: up to 1800 strokes/h approx. 3600 products/h (depending on the product) Max. raw material height: 110 mm Max. raw material width: 85 mm Cutting: segments (quarters), slices, sticks – without the use of water Overall dimensions (L x W x H): 2000 x 945 x 1700 mm Feed height: 900 mm Weight: 460 kg

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm Klodpfxsu Nhiqe Anyju - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: used, Length - 470 cm Width - 135 cm Feeding height - 120 cm Discharge height - 160 cm Belt width - 62 cm Cleat height - 5 cm Cleat spacing - 40 cm Klsdpfx Asxn Utrenyju Frequency inverter - yes

Condition: excellent (used), Machine ready for operation. Table length: 310 cm. Width: 88 cm. Height: 152 cm. Kledpfx Anoycxt Hoyju

Condition: used, The machine is ready for operation Kedpfoxn Up Hjx Anyelu

Condition: new, Knife grinder Motor: 2.2 kW / 2800 rpm, 220V, Capacity: 400-800 kg/h for fruit, 40-200 kg/h for dry material Screens: 4 pieces, according to request. Purpose of the machine: Pre-chopping and grinding. Suitable for grinding the following products: - Grains: wheat, corn, peas, pepper, caraway. - Pressed seeds: sunflower cake, soybean meal, pumpkin seed cake, linseed cake, poppy seed cake, etc. - Raw fruits and vegetables: pepper, plum, apricot, apple, quince, pear. - Dried fruits and vegetables: pepper, onion, garlic, raspberry, blackberry, apple, sour cherry, etc. Main components of the machine: - Frame - Safety switch - Motor 380V or 220V - Housing - Hopper Klsdpfjxvxbcox Anysu - Sieve - Knives - Dosing regulator Available in stainless steel version.

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h - Electric demands: 0,5 kW, 230 V, 6 A, monophase Kledpfx Ajfhb I Hjnyou - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. - The machine is suitable for any Maurer press.

Year of construction: 2026, condition: new, Specifications: - Performance: 3000 kg/h - Electric demands: 0,75 kW, 400 V, 16 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x2100x2800 mm - Output height: 1820 mm - Weight: 135 kg - Tub water capacity: 280 L/shift Klodpofd E Trofx Anyeu - Washing water supply: (20-100L/h depending on the setting) - Water connection: 3/4“ quick connector - IP65 certified electronics The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance.

Year of construction: 2026, condition: new, machine/vehicle number: 1234, The liquid is filtered through a double lime filter, designed to prevent particles larger than 200 microns accumulating in the pasteuriser from entering the storage tanks. The pressed juice is filtered through a double filter. Two filters, which operate independently of each other. Technical data: - Performance: max. 2000 L/h - Fineness of filtration: 500 μm - Material: WNr. 1.4301, AISI 304 stainless steel - Size: 550x300x1200 mm - Weight: 20 kg Kljdpfx Aneiu Hyasyeu - Connection: DN 25 Optional: - Filter 1: 250 μm - Filter 2: 100 μm - Filter 3: 50 μm

Year of construction: 2026, condition: new, machine/vehicle number: 123456, MMD 3000 washing system with pivoting brush The unwashed fruit is fed into the system, and after a pre-wash, it is further cleaned by another spray of fresh water on the conveyor belt. Easy to clean, equipped with durable, food-grade polypropylene/acetal modular belts with steplessly adjustable belt speed in two directions, with two steerable rollers and two fixed rollers, or with anti-vibration feet. Requires minimal maintenance. Technical data: - Rated capacity: 1000-2000 kg/h - Power consumption: 3 kW, 400 V, 16 A, three-phase - Material: Material no. 1.4301, AISI 304 stainless steel - Dimensions: 3325x800x2200 mm - Discharge height: 1380 mm - Weight: 240 kg - Washing tank water capacity: 280 L/shift - Water consumption: 20-100 L/h (depending on settings) - Water connection: ¾” quick coupling - IP65 electronics - Steplessly adjustable belt speed - Brush equipped with a durable hammer (also suitable for beets and quince) Options: Kljdod Aqmzjpfx Anyeu - Different sieve inserts for the attrition mill: for the desired fineness of fruit and vegetables - Stop ‘n’ Go system – Sensitive sensor that allows the fruit washing system and any type of Maurer belt press to operate in coordination with the washing system without clogging - Adaptive electric valve – The fresh water spray only works when the conveyor belt is running - Air injection – with nozzles and a fan at the bottom of the tank for intensive washing - Air knife – removes water from the surface of the fruit, so that less water ends up in the final product - Circulation pump with filter – ensures the correct flow in the washing tank

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Mobile fruit and vegetable processor unit Specifications: -Performance: end product 300 L/h maximum -Input capacity: 300kg/h -Electric demands: 10 kW, 400 V -Heating performance: 30 kW -Fuel: propane, PB, natural gas -Flue gas outlet: 60/100mm concentric chimney -Material: WNr. 1.4301, AISI 304 stainless steel -Dimensions: 6100x2200x2800 mm -Weight: ~2,3 tons (depends on the accessories and options) -IP65 certified electronics -Heat exchanger: soft water -Connections: DN 25 BUILT-IN MACHINES: -Custom made washer with grinder (openable, tiltable) -MKSP 300 belt press (automatic) -MKT 100 juice collector tank with pump (automatic) Kljdpfx Ajiu Hz Henyju -Puffer tanks -MKPAG 300 gas fuelled pasteurizer (automatic) -BB TOP 180 semi-automatic filler or Bottle filler with 2 heads -Air compressor -High pressure washer Galvanized steel chassis with aluminium anti-slip floor, and aluminium superstructure. The two sides and the rear side is openable in 90° angle. The openable washer recieves the fruits. After the grinding and pressing, the automatic juice collector towards the juice to the puffer tanks. Then the automatic pasteurizer does the heat treatment, and in the final step, the operator fills the end product in bags or bottles. The machine is as automatic as possible, it needs only 2 workers to operate. Very easy to clean. Requires minimal maintenance. Options: -Diesel generator (10kW) -3,2 tons trailer -300L freshwater tank -300L waste water tank -Filtration system -Tent system -Custom graphic design on the outer surface

Condition: used, functionality: fully functional, capacity of 3 buckets, each 800 kg Kledpfsxd H Itsx Anyju

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Kedpfxew Adkfe Anyslu Complete with control cabinet, fences and hydraulic unit, valves etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery.

Condition: new, Year of construction: 2025, We offer high-quality fruit and vegetable shelving for retail stores. Our shelves are available in a wide variety of models, colors, and sizes to perfectly fit your store layout and product needs. Kledpfjw S Inxex Anysu Whether you need compact shelves for small spaces or larger units for extensive displays, we have the right solution for you. Prices vary depending on the model and size, giving you the flexibility to choose what best suits your business.

Year of construction: 2023, condition: new, functionality: fully functional, We are offering Brand new Kreuzmayr KEB 750 full fruit processing line which is located in Baku,Azerbaijan. All details you can find in document which will be included below. Kljdpfx Aeuikf Esnyeu

Year of construction: 2018, condition: good (used), functionality: fully functional, For sale is a high-quality and compact pasteurization unit (HTST) from the specialist fruittech, built in 2018. This system is ideal for medium-sized breweries or beverage producers seeking a reliable solution for thermal preservation. The entire unit is mounted on a sturdy stainless steel base frame (skid), making it plug-and-play: it is easy to transport, quick to install, and simple to integrate into existing processes. Kledpfx Ansy Hgt Doyeu Key features: - Efficient heat transfer: The installed API Schmidt-Bretten SIGMA plate heat exchanger offers maximum thermal efficiency with minimal footprint. According to the nameplate, the system is designed for multiple beer zones, hot water, and cooling (ice water). - Hygienic design: Equipped with two high-performance CSF Inox stainless steel centrifugal pumps (each 5.5 kW), specifically developed for the food and beverage industry. - Modern controls: Operation is intuitive via a central touch display on the stainless steel control cabinet, enabling precise monitoring of the pasteurization units (PU). - Compact design: All piping, valves, and sensors are neatly arranged on the frame. The unit is professionally manufactured and is in excellent visual condition.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 150 kg, load capacity: 12 kg, arm reach: 1,425 mm, pivoting range: 354 °, controller manufacturer: fruitcore robotics GmbH, control cabinet width: 174 mm, control cabinet height: 313 mm, input voltage: 230 V, input current: 6 A, type of input current: AC, repeat accuracy: 0.1 mm, Equipment: documentation/manual, Industrial Robot HORST1400 Optimal Performance with Cost-Effective Investment The robot system includes: - Industrial robot HORST1400 - Control unit & accessories - Operating panel (VE500663) or Panel G2 (VE500681) - WLAN stick for use of Digital Services - Central control software horstOS including Basic Features - Access to the IIoT platform horstCOSMOS - 6-year warranty on the robot drive system Performance Data: - Reach: 1425 mm - Payload: 12 kg - Repeatability: +/-0.10 mm Klsdsy D Ryiepfx Anyou - Weight: approx. 150 kg - Ambient temperature: 5-40°C - Protection class: IP54 For further details, please refer to the attached technical data sheet. Documentation / Operating Manual Our products comply with the Machinery Directive 2006/42/EC. A printed operating manual in German including an installation declaration is also included in the delivery. The following software features are not included in the delivery but can be ordered additionally: Additional Feature: Advanced Automation Features Scope of Performance: - Component management library – access to all component templates from fruitcore robotics - Parallel processes – simultaneous execution of multiple routines within one robot program - Start-up routine – automatic execution of predefined processes when starting the robot system - Email notifications – sending emails in case of defined events (e.g. in case of faults) - Process control – customized design of the process control screen Additional Feature: Advanced Graphical Features for Fastest and Simplest Robot Programming Scope of Performance: - Graphical programming of palletizing applications - Graphical robot programming with complex paths - Setup of work area limitations - User-defined coordinate systems AI Features Scope of Performance: - AI support - AI programming - AI error handling

Year of construction: 2022, condition: ready for operation (used), A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible. Kledpjy Ax Ufofx Anysu

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Double-sided component painting line fully automatic Working width of the line 1300 mm The line consists of the following devices: Ksdpfx Aetut Dxjnyolu - Vacuum feeder - automatic feeder before painting - GIARDINA Dualtech 416 automatic paint machine - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - material turntable - automatic painting machine RICHFRUITS - 2 x 12m hot air drying tunnel - UV dryer - 3 lamps - Vacuum feeder Machine in working order, connected in very good condition.

Year of construction: 2026, condition: new, Machine provides fully automatic filling process for webbed Bag in Box bags. After inserting the first bag, machine removes the cap, fills the liquid and caps the bag. Then it releases the filled bag and takes another one for filling. This way the filling process is continuous and operator only needs to take the filled bag out of machine. To fill separate Bag in Box or Pouch bags, insert a package into the filler and press START button – machine automatically removes the tap, vacuums the bag, fills it with liquid and closes the bag. Capacity: ~2000 l/h -Perfect for filling various liquids: from juice, wine, milk to broth, oil, soap, etc. -Easy-to-use mechanism does all the work automatically. In addition to that, bags can be supplied to machine manually (separate bags or pouches) or automatically (bags in web). -Suitable for both hot and cold filling. -Machine fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. -Machine fills packages with tap closure. It is also possible to fill packages with different closures on request. -Laser safety mechanism protects limbs by automatically stopping & cancelling the filling process in case of an accident. -Machine is made from stainless steel materials (AISI 304). -Touch-screen control panel and multi-language menu grant easier work. -The error of repeatability of volumes is only ± 0,3 %. Kodoq Nl A Repfx Anyjlu -Additional filling table is possible, which slides beneath the main table for filling bags of bigger volume (from 20 to 30 L). -The filler is easy to clean after work with external and CIP cleaning. -Working surface of the table consists of conveyor rollers which are exceptionally easy to clean. -All parts have IP 65 water protection.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. Klsdpoq Nl Aqefx Anyju -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.