Used Fruit Press for sale (12,961)

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Bedpfx Ajzrpursaiowr Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Bwodpjzrptusfx Aaisr Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m with oil-hydraulic drive, hydraulic drawing cushion in table

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s Bwsdpfx Aaszrppvoisr feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, Roll divider WP Rotamat EN Dough divider and rounding machine Stationary machine, 30 portions, ideally suited for dividing and rounding dough with plastic knife head, Bedpfxezq Uw Ns Aaiewr connection 400 V, 16A-CEE plug, dimensions: 650 x 670 x 1610 mm, W x D x H Used machine

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, year of last overhaul: 2026, Fortuna Automat A 3 H+ roll divider Dough dividing and rounding machine TOP model with rounding function switch-off Dividing head with stainless steel knife, NEW Dough capacity up to 2400g Bwjdpfx Aajxduwijisr Dough divider with 3 rounding plates Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Platform or mobile base Rounding plates, new Delivery service Maintenance contract Spare parts box Training & commissioning Visit our large showroom!

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h Bwodpozrnvzjfx Aaisr - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2019, operating hours: 119 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Technical data: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 119 Pressing force: 60 t Drive power: 4 kW Feeding opening: 1500 x 651 mm Feeding height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical pressing capacity: 32.5 m³/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Bwedpjzqr Rgofx Aaior Materials: film, paper, cardboard Note: The baler is in very good condition. Please note: All technical data is based on manufacturer's information. We assume no liability for the details provided or any possible errors. All offers are subject to change, prior sale reserved, and may be withdrawn at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: good (used), Year of construction: 2021, operating hours: 423 h, functionality: fully functional, Vertical baling press HSM V-Press 860 plus, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 423 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: Bedpfx Aezqr Nieaijwr All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment. Bwodpfx Aszqr Irsaijr

Condition: good (used), Year of construction: 2021, operating hours: 245 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 245 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Bodpezqr Iljfx Aaiswr Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any possible errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Please find below the details regarding the equipment available for sale: ARISA 400-ton Mechanical Press (S-2-400-160-FS) + DIMECO Feeder Line – Year 2001 Description: Complete ARISA 400-ton mechanical press for cutting/forming, with its automatic DIMECO feeder line (uncoiler/feeder). Technical Specifications: ARISA Press: - Brand / Model: ARISA S-2-400-160-FS (No. 400365947) - Year: 2001 | Standard: CE - Rated force: 4,000 kN (400 tons) - Stroke (Min / Max): 25 - 250 mm - Stroke rate: 25 to 100 strokes/min - Closed height: 485 mm | Slide adjustment: 200 mm - Power: 55 kW | Press weight: 65,000 kg (65 tons) ARISA Moving Table: - Model: Type 934.34 (No. 934345950) - Table dimensions (L x W): 1,700 × 1,300 mm - Max. tool load: 6,000 kg | Floor to table height: 1,025 mm DIMECO Uncoiling Line: - Includes: Single/double mandrel uncoiler + straightener/feeder + loop control - Max. coil capacity: 6,000 kg We remain at your disposal for any further information. BT MACHINES Bodpozpz U Sjfx Aaiswr BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: High-performance mechanical stamping and forming press, ARISA brand, model S-2-400-240-FS, with a force of 400 tons (4,000 kN), year 1999. This high-precision industrial machine is ideal for stamping, cutting, and combined stamping/cutting operations for industrial series production (automotive, household appliances, precision sheet metal work). Here are the complete technical specifications: Bwsdpfxjzpz Dms Aaisr General Information: - Brand/Manufacturer: ARISA S.A. (Spain) - Model: S-2-400-240-FS (S Series) - Manufacturing No.: 400365704 - Certification: CE Type Examination No. 0070 090C 0088 09 95 (INRS) - Total weight: 66,000 kg (66 tons) Capacities & Performance: - Rated force: 4,000 kN (400 tons) at 7 mm from the force point - Slide stroke: 25 - 250 mm - Closed height: 600 mm - Slide adjustment: 150 mm - Stroke rate: 25 - 100 strokes/min - Maximum flywheel speed: 500 rpm - Normal stop: Top Dead Center (TDC) - Time to reach safety distance: 0.126 s Dimensions & Tools: - Maximum dimensions of the upper tool (L x W): 2,300 × 960 mm - Maximum weight of the upper tool: 5,700 kg Power & Energy: - Installed power: 65 kW - Power supply: 380-500 V / 50 Hz (Three-phase, connection cable section 3.5 x 50 mm²) - Pneumatic pressure: 6 - 1 bar - Hydraulic pressure: 270 bar - Clutch-brake couplings: 30 cycles/min (Minimum-maximum pressure: 59 - 67 bar) Included Equipment: - Damping cushion / upper pneumatic cylinders - Front transparent protective screens and side safety grilles - Mobile control panel on wheels and emergency stop panels - Part/scrap discharge conveyor - High-rigidity column frame Do not hesitate to contact us for further information or to request a quote.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bjdpfx Aezqc Ngsaiewr Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic Bodszhvaajpfx Aaijwr - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7993 TECHNICAL DATA - Loading fields: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs Bwedpfx Aaozh H Egoisr - Max length of glued elements: 2500 mm - Max height of glued elements: 1330 mm - Max thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000x1350x2000 mm - Weight: 900 kg ADVANTAGES – Two working zones – Gluing length of 2500 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Pressing force: 130 tons Bedpezq A Ipefx Aaijwr

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Length: 3400mm Bedpfx Aewyuqkoaiswr Width: 3400mm Height: 3500mm Weight: 19000kg

Condition: used, We are offering for sale a floor-type press made by the Italian manufacturer Colombo R. Available for immediate delivery. Bwodpfozry Rwex Aaijr

Year of construction: 2020, condition: good (used), functionality: fully functional, DESCRIPTION/FEATURES: 5-color offset printing press for labels, with an inline flexo unit and die-cutting. The machine is equipped with: Bwjdpfx Aaezrxdpjior • Unwinding unit • BST web guide • UV LED drying (5) • Turning bar • Offset units: 5 • Flexographic unit • BST registration camera • Automatic washing system • for ink rollers • Automatic plate loading system • Semi-rotary die-cutting unit with magnetic cylinder • Rewinding unit with slitting (blades) • (shearing) • Inking console + CIP 3 for automatic color adjustment • Cooling unit for ink fountains • CCD plate punching table • Automatic registration

Condition: used, Year of construction: 2015, For sale: professional hydraulic CNC bending press AMADA HFE M2 170-3. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 170-3 Date of manufacture: 2015.06 Bending force: 170 T (1700 kN) Working length: 3000 mm Maximum bending length: 3340 mm Motor hours: 16,615.07 Technical parameters: Distance between columns: 2700 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 18 kW Bodpfx Aaszrw Akeiewr Machine dimensions: Length: 4470 mm Width: 2625 mm Height: 3140 mm Weight: 12400 kg Equipment and features: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2015, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Bwedpfjzrwc Djx Aaijr Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Rotex Air Lite V3 IVM” textile press Item for sale: 1x Rotex Air Lite V3 IVM Condition: This offer is for a used device, which may show signs of wear (minor scratches or discoloration). The unit has been tested to ensure it is in working order. Packaging and Shipping: You are welcome to inspect the unit during our business hours. Please schedule an appointment to do so! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we will record a video of a functional test for you. For more information, please feel free to contact us directly. Bwjdpfxezpw E Hj Aaior

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Bsdowwvx Dopfx Aaiewr Light Guards Full length top and bottom tooling

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Bedpewki Apjfx Aaijwr Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 73332117063, functionality: fully functional, pressing force: 175 t, stroke length: 265 mm, total length: 4,100 mm, total height: 2,900 mm, overall weight: 12,000 kg, working width: 3,050 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time between September 21st and October 1st! TECHNICAL DETAILS Press force: 175 t Stroke: 265 mm Working length: 3,050 mm Bwodpfjzquplsx Aaisr Control: Durmazlar DT-15 Upper tools, weight: 11 kg Lower tools, weight: 16 kg Tool cabinet, manufacturer: Apfel MACHINE DETAILS Overall length: 4,100 mm Overall width: 1,800 mm Overall height: 2,900 mm Total weight: 12,000 kg EQUIPMENT - Various bending tools - Punches - Dies - Other bending tools - Workshop drawer cabinet, manufacturer: SSI Schäfer - Contents of the workshop drawer cabinet suitable for the machine External reference: Lebtig - Lot 77