Used Ga 90 Vsd for sale (16,592)

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front Csdpfxji Riwue Ah Ieha 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: excellent (used), Year of construction: 2013, operating hours: 20,453 h, functionality: fully functional, Atlas Copco GA11VSD+ screw compressor Inverter integrated 11 kW 13 bar 1.95 m3/min Year of manufacture: 2013 Operating hours: 20,453 Csdpfxey Uiycj Ah Ieha

Condition: used, functionality: limited functionality, Year of construction: 2009, load capacity: 2,000 kg, fork length: 1,200 mm, Fork positioner Condition: Ready for operation and fully functional Technical condition: poor Description: Year 2009 Capacity 2000 kg Sideshift Opening range 300-850 mm Width 900 mm Forks 1200 mm Mounting: Linde 1120 R20HD INSIDE 315 mm OUTSIDE 256 mm LENGTH 615 mm ID OS1700 Codpfsw Ez Tvsx Ah Ijha

Condition: excellent (used), For sale: Professional SOYER BMS 800-90 stud welding machine from a renowned German manufacturer. This device is designed for industrial stud welding using the spitzenzündung (contact ignition) method. Ideal applications: - Steel construction - Industrial production - Metalworking and assembly workshops ⚙️ Technical data: Chsdpfeyzuc Asx Ah Iea Manufacturer: Heinz Soyer Bolzenschweißtechnik GmbH Model: BMS 800 Type: BMS 800-90 Year of manufacture: 1991 Power supply: 220 V Frequency: 50–60 Hz Charging voltage: 60–190 V Capacity: 90,000 µF Max. current: 8 A Protection class: IP21 Made in: Germany (West Germany) 📦 Included: - Control unit - Welding gun - Power and work cables - Ground clamp 📊 Technical condition: - Used device - Shows normal signs of use consistent with operation - Visual condition as shown in the photos - Not tested under full load ✅ Advantages: - Robust industrial-grade construction - Proven German technology - Compact and mobile casing - Easy operation 🚚 Shipping: Courier shipping or personal collection available. International shipping is possible.

Condition: new, For sale: high-quality electric motor from the renowned brand WEG, Premium IE3 series. The motor is new, unused, and has been stored in a warehouse – condition is very good. Ideal for pumps, fans, industrial machinery, and workshop applications. ⚙️ Technical specifications Manufacturer: WEG Cedpfxoyvamns Ah Isha Model: AL90S L 02 Power: 2.2 kW Speed: 2855 rpm Voltage: 230 / 400 V Frequency: 50 Hz Current: approx. 7.8 / 4.5 A Efficiency class: IE3 Degree of protection: IP55 Duty type: S1 Flange version: B5 Shaft diameter: approx. 24 mm Weight: approx. 22 kg Year of manufacture: 2018

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: Chjdpfsxx Snbex Ah Ija WORKING

Condition: used, power: 67 kW (91.09 HP), next inspection (TÜV): 02/2027, Year of construction: 2005, operating hours: 9,560 h, Equipment: air conditioning, all wheel drive, cabin, German tractor, in use until recently. Second owner, both times government park administration: from 2005 to 2017, and from 2017 to 2026. All-wheel drive. 4-cylinder turbo diesel engine with 4485 cc and 91 hp. Large 24-speed Hi-LO transmission, 4 gears in 3 ranges, 2 powershift stages, and powershift reverser. 40 km/h maximum speed. Air brake system. Comfort cabin with air-suspended driver's seat and air conditioning. Rear PTO with 3 speeds (540/750/1000 rpm). Category II rear hitch with quick couplers and auxiliary lift cylinders (5060 kg capacity). Quick-adjustable height towing hitch. 2 mechanical control units (switchable between single- and double-acting). Front PTO and front hydraulics were retrofitted to the new tractor in 2005. Unladen weight: 4,250 kg. Cjdpfx Ahey Ean So Ieha Permissible total weight: 6,200 kg. Registration as "LOF agricultural tractor". Transport dimensions: length 4.36 m / width 2.29 m / height 2.64 m. Front tires: 360/80R24. Rear tires: 440/80R34. All tires are in good condition. According to the vehicle registration supplement, various alternative tire combinations are permitted. The tractor is operational; deregistration scheduled for 16.04.2026. Inspection (TÜV) valid until 02/2027. This offer is only valid for commercial businesses, farmers, foresters, and similar self-employed individuals. Secondary occupation is sufficient. The offer is also valid for government agencies. Sale to private end consumers is strictly excluded. Subject to prior sale and possible errors. Net price: €20,900.

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Chsdpfowr Nnbex Ah Ioa

Condition: used, Year of construction: 2006, operating hours: 10,070 h, Equipment: all wheel drive, * Large and small shovel + fork included Chedpownk Egjfx Ah Ija

Condition: used, Year of construction: 2018, operating hours: 7,136 h, Equipment: all wheel drive, CAT 907M wheel loader, model year 2018, with folding bucket and forks! ---- * Manufacturer: CAT * Model: 907M * Model year: 2018 * Recorded operating hours: approx. 7,136 Chedpfjzb Tbvox Ah Isa * Includes folding bucket and forks * Hydraulic quick coupler * German machine * First owner * More photos and video available upon request (WhatsApp Erik) * Price: €24,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp ?All information is without guarantee, subject to errors and prior sale.?

Condition: new, maximum load weight: 6,707 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,560 mm, loading space width: 2,480 mm, loading space height: 2,915 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle Information ? Loading space length: 13,860 mm ? Height: 4,000 mm ? Width: 2,550 mm ? Loading space length (interior): 13,560 mm ? Loading space height (interior): 2,915 mm ? Loading space width (interior): 2,480 mm ? Fifth wheel height: 950 mm ? Gross vehicle weight: 30,000 kg ? Unladen weight: 6,707 kg ? Loading height in the rear portal: 2,850 mm _____ Axles ? BPW axles with disc brakes ? 445/45 R19.5 ? Jost supports ? ABS ? Axle cap odometer, mechanical version ? Air suspension ? Steel rims ? Wheel nuts with protective caps ? Wheel chocks _____ Body / Attachments ? Plastic toolbox ? Closed body ? Panel thickness: 28 mm ? Forklift collision protection inside, on the side, approx. 320 mm high ? Installation: Height of the center of the 1st lashing row above floor: 600 mm ? Installation: Height of the center of the 2nd lashing row above floor: 1600 mm ? Installation: Height of the center of the 3rd lashing row above floor: 2200 mm ? Internal espagnolette locks ? 3 locking beams _____ Floor ? 30 mm thick, waterproof panel floor ? Floor loads up to 7,000 kg forklift axle load ? Teardrop plate embedded in the rear floor plate (4 x 700 mm) ? Premium visual seal Chodpfxsvw Hk Es Ah Iea _____ Lighting / Electrical System ? Multi-chamber lights (LED) ? LED side marker lights with direction indicator ? 2 rubber-armed LED clearance lights ? 2 LED license plate lights ? 4 KRONE LED ceiling lights _____ Paint ? Body: RAL 9010 pure white ? Chassis: RAL 9005 jet black ? Axle hub: RAL 9005 jet black _____ ? Load securing certificate according to EN 12642 Code XL ? Load securing certificate according to Daimler Directive 9.5 ? Load securing certificate for beverage transport (VDI 2700 Sheet 12)

Condition: excellent (used), Viessmann Vitoplex 900 kW. Biogas container plant, heating centre, year of manufacture 2021. Seldom used. Csdpfeywzvusx Ah Ieha

Condition: excellent (used), Weishaupt RGL50 / 4900 kW / Oil & Gas / Dual-fuel burner Chedpfxezal Ncs Ah Ija

Condition: excellent (used), Elco VG3.290. gas burner 290kw Csdpfx Aepirntoh Ioha

Condition: used, mileage: 432,230 km, power: 287 kW (390.21 HP), first registration: 07/2006, fuel type: diesel, empty load weight: 10,060 kg, maximum load weight: 15,940 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, AS-Tronic automatic, differential lock, fog lights, storage box, leaf-,air, last axle liftable and steerable, low-noise G1, U-protection, roof hatch, environmental badge green Wheelbase: 3900 mm Body: Willig tank body for heating oil & diesel with 3 chambers approx. 20,000l (8200l/4500l/7300l) Transmission ZF 12 AS 2301, M cab. Next leak and function test 10/2025! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Csdpfsvhmu Esx Ah Isha - .

Condition: used, mileage: 1,001 km, power: 47 kW (63.90 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 5,600 kg, empty load weight: 5,020 kg, maximum load weight: 580 kg, lifting height: 4,100,000 mm, axle configuration: 4x4, number of seats: 1, first registration: 11/2021, Year of construction: 2021, operating hours: 838 h, driver cabin: other, wheelbase: 2,000 mm, maximum speed: 20 km/h, Equipment: additional headlights, all wheel drive, onboard computer, pallet forks, standard shovel, Vehicle location: Bovenden. Features include: 1 air suspension seat, raised exhaust, differential lock, work lights, and a rotating beacon. Wheelbase: 2000 mm. Water-cooled Kubota 4-cylinder engine, hydrostatic drive, forward/reverse travel speed 0-20 km/h! Bucket discharge height approx. 2465 mm! Maximum lifting height approx. 4100 mm! Chodpfx Ahov Nba So Isa Overall length approx. 5485 mm! Overall height approx. 2480 mm! Overall width approx. 1725 mm! Approx. 1180 operating hours! Pallet forks available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 2012, operating hours: 72,651 h, functionality: fully functional, Screw Compressor Atlas Copco GA37VSDFF Integrated inverter and dryer 37 kW 12.80 bar 7.37 m³/min Csdpfsy Rva Isx Ah Isha Year of manufacture: 2012 Operating hours: 72,651

Condition: new, functionality: fully functional, machine/vehicle number: XLRAEL2740L559364, fuel type: diesel, empty load weight: 6,500 kg, maximum load weight: 9,500 kg, overall weight: 16,000 kg, tire size: 285/70r19,5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,250 mm, axle spacing: 3,250 mm, fuel: diesel, fuel tank capacity: 200 l, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 6,000 kg, permissible axle load (axle 2): 10,500 kg, loading space length: 4,200 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, fog lights, hill-start assist, onboard computer, power assisted steering, start-stop system, tire pressure monitoring, traction control, NEW, IMMEDIATELY AVAILABLE Cjdpjzdi Szofx Ah Ijha 6,700 cc engine – 290 hp 8-speed automatic transmission Rear air suspension Wheelbase: 3,250 mm TAM T12 skip loader – body length: 4.20 m +/- Articulated arm (slewing) Stabilizer roller Front locking mechanisms Hitch: 1,480 mm PAYLOAD CAPACITY: 9,500 KG (without body)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Csdpfx Ahjzb Ikfe Isha Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: excellent (used), Year of construction: 2015, operating hours: 19,431 h, functionality: fully functional, Screw compressor Atlas Copco GA22VSD+FF Chjdjy Nlqgspfx Ah Ioa Integrated inverter and dryer 22 kW 12.75 bar 4.51 m3/min Year of manufacture: 2015 Operating hours: 19,431

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO GA26VSD+ screw compressor, equipped with a frequency converter, recently serviced. Technical specifications: Capacity: 5.15 m3/min; Engine power: 26 kW; Maximum pressure: 13 bar; Year: 2015; Operating hours: 9845 h. Price: 30,900 net. Price: 38,007 gross. The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support. Link to video below. Chedoy Idhnspfx Ah Ioa

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: blue, The images are archive photos; the vehicle may still be in use! Chassis Platform Semi-Trailer for Freight Forwarders Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock" profile for lashing strap attachment Note: In order to attach the straps in combination with side walls, the side walls must be opened! Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 t 24 t, two-speed landing leg, single-sided operation, with straight base, without compensation mechanism Pull-out ladder at the rear Side-mounted door retainers Wheel chocks with holders Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or rear swing clearance approx. 1,930 mm Underrun protection, galvanized steel Full-width rear spray flaps Half-shell mudguards With anti-spray mud flaps only on the last axle Rear impact guard "Blocker" – galvanized crosswise steel angle as forklift and hinge protection Pair of ferry lashing eyes, marked yellow Pallet stop on both sides, approx. 15-20 mm high, bolted design; loading height is reduced by approx. 15-20 mm Spare wheel holder for one electronic wheel, including wheel mounting kit, basket type, brand Schoch! Spare wheel, same brand/type as main tires, steel rim Stainless steel toolbox, width=600/height=400/depth=500 mm, with polished, lockable door Stake pockets Front right: 5 rows of aluminum V-stake inserts Front left: without stake inserts Rear wall / rear corner posts Rear corner posts made of steel up to the lower edge of the roof, curtain pole mount with round tube and curtain tension ratchet Rear portal doors, 2-leaf design, each with 2 internal rotary bolt locks Curtain Curtain with welded horizontal and vertical straps Quick Lock system for side curtain with central locking, on left side only Stainless steel tension locks on right side Customs rope all around with holder at front wall (no customs seal, not in combination with Quick Lock) Customer labeling on side curtains and rear portal Curtain with high-strength embedded spring steel strips, left side (Attention! When fitted, no stake inserts front left) Roof Chsdpewyiw Eofx Ah Iea Sliding roof, rear end-lift foldable upwards, sliding tarpaulin from rear to front, tarpaulin color: white EcoLift – roof can be raised by approx. 380 mm, both sides, gas strut assisted Optimal rain gutter at rear, upper end rail, above the doors Paintwork Frame: Hot-dip galvanized incl. passivation Landing legs: black coated Front corner posts: galvanized and painted to match front wall color Front wall: MB 5328 blue Rear corner posts: galvanized and painted to match rear wall Rear wall: MB 5328 blue Curtain: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images are archive photos; the vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, transport company Fine-grain steel, welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approximately 8,040 mm long, 6 coil supports (coil pockets, internal dimensions 82 x 52 mm), coil cover with screen-printed panels and steel crossbars, 2 gap band covers for the coil well, each approximately 293 mm wide, tare weight approximately 13 kg per cover, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, note: to attach the straps in conjunction with the side panels, the side panels must be opened! 9 pairs of lashing eyes, each rated at 5 tons, embedded in the area of the coil well, 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without slide-out compensation, note: free support foot clearance or free rear swivel radius approximately 1930 mm, without supports, extension ladder at the rear, door latch on the side, 2 chocks with holder, aluminum side impact protection, bracket positioned transversely to the longitudinal beam and attached to the longitudinal beam to support aluminum slats, aluminum underrun protection, semi-elliptical fenders, with anti-splash flaps according to EC regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stake pockets embedded in the outer frame, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 19219, Csdpfx Ahjwhp A Dj Ioha 2 stake pockets embedded centrally in the floor, internal dimensions approximately 72 x 42 mm, according to Fliegl stake data sheet (old version), as in AU 192198, note: stake pockets/recesses are not designed for the sole securing of long materials, pipes, etc., without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight, air suspension, without lift axle. The images are archive images; the vehicle may still be in use.

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Codpfoxk U Aljx Ah Ieha Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 2011, operating hours: 50,496 h, functionality: fully functional, Screw Compressor Atlas Copco GA11VSDFF Integrated frequency converter and dryer 11 kW Csdpfx Ahjy Ipcwo Ijha 12.75 bar 1.84 m3/min Year of manufacture: 2011 Operating hours: 50,496