Used Gantry Mill for sale (10,003)

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, table load: 12,000 kg, total height: 3,800 mm, total length: 8,800 mm, total width: 5,900 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, overall weight: 42,000 kg, Table type boring mill Fermat - WFT 13 CNC MACH-ID 9430 Make: Fermat Type: WFT 13 CNC Control: HeidenHain iTNC530 Year: 2015 X - Travel: 3000mm Y - Travel: 2000mm Z - Travel: 1500mm W - Travel: 700mm Table Length: 1800mm Table Width: 1600mm Table load: 12000 Speeds / ranges: 3000Rpm Power: 61kW Ram size: 300 x 300mm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 1-20000mm/min. Feed rate Y-Axis: 1-20000mm/min. Hodpfx Ajyim I Rebrofc Feed rate Z-Axis: 1-20000mm/min. Feed rate W-Axis: 1-20000mm/min. ATC Toolchanger: 30 Number of controlled axis:5 Length: 8800mm Width: 5900mm Height: 3800mm Weight: 42002kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), De vorige eigenaar was een Belgisch bedrijf dat aluminium mallen produceerde voor Bridgestone-autobanden. De apparatuur bestaat uit 3 Breton-machines en een Fanuc-robot voor het lossen van de werkstukken. Breton Ultrix 800 (nr. 1) Breton Ultrix 800 (nr. 2) Breton Xceeder 900 Fanuc M-900iB handlingrobot Hfedpfxextgkgj Abroc Max longitudinal travel X-axe: 18 000 mm

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Hjdpsw Nklhjfx Abrsfc Weight 4200 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, load capacity: 6,300 kg, For sale is an as-new indoor crane system from Konecranes. The crane is a model S05D (single-girder overhead travelling crane) and is in nearly unused condition. Technical data: Load capacity: 6,300 kg Span: 16,945 mm Lifting height: 5.20 m Year of manufacture: 2024 Lifting speed: 4.0 / 0.08 m/min, infinitely variable Trolley travel speed: 20.0 m/min, infinitely variable Crane travel speed: 40.0 m/min, infinitely variable Equipment: Remote control: REMOX516MI (2400 MHz), including spare transmitter and storage cabinet Overload protection: Including load spectrum memory Travel limit switches: Pre- and end-position limit switches for trolley and crane travel Signal horn: Volume 98 dB Rope Angle Features (RAF): Hook collision protection, hook center positioning, and manual crane hook guiding Power supply: Safety conductor line approx. 30 m long, including main isolator switch Transport and loading can be organized Europe-wide on request at an additional charge. Prices are plus VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Hsdpeykt Smofx Abrofc Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Condition: new, The VHF 3.2 is a robust and versatile universal milling machine that fits seamlessly into the category of Conventional Vertical Milling Machines and the product group of Universal Milling Machines. This high-performance model enhances the proven capabilities of the VHF series, featuring a combination of a horizontal spindle and a swiveling vertical milling head, which expands its range of applications. Built with a rigid machine bed from high-strength HT-200 cast iron and equipped with precision-made headstock gears, the VHF 3.2 offers durability and reliability. Its extensive setup area of 1,370x320 mm and the ability to handle angular bores make it suitable for diverse tasks in both repair workshops and educational settings. The machine’s powerful servo-motor provides infinitely variable feed across all three axes, facilitating efficient operations. One can enjoy minimal downtime thanks to rapid positioning of the work table, alongside a comfortable control panel swiveling to enhance usability. Request a quote today to explore how the VHF 3.2 can elevate your machining capabilities in the realm of Conventional Vertical Milling Machines and Universal Milling Machines. Hsdpsn E Ni Hsfx Abrjfc

Condition: refurbished (used), Year of construction: 2013, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, table width: 760 mm, distance table to quill: 585 mm, table length: 1,000 mm, workpiece length (max.): 1,095 mm, workpiece width (max.): 795 mm, workpiece height (max.): 480 mm, overall weight: 6,800 kg, year of last overhaul: 2025, table load: 2,000 kg, rapid traverse Z-axis: 18 m/min, Equipment: documentation/manual, OPS INGERSOLL GANTRY EAGLE 800 Overhauled Year of construction 2013 EAGLE Powertec PC/NC control 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control unit Manual eroding with Powertec Handheld EAGLE Powertec - PT 60 fine finishing generator, 60 amps High Speed Jump max. 18,000 mm / min. Travel (X, Y, Z) 550 x 850 x 450 mm Hfedpfxsyi Uaie Abrec Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disk magazine Work bowl (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS , Hirschmann or System 3R (customer request) ECOTEC energy-saving function Standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Year of construction: 2005, condition: used, Empty weight: 10.000 kg Dimensions (LxBxH): 220 x 270 x 250 cm Price: On request Lots of accessories! Includes - probe Includes - 3 vices - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 16286 - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 2 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 410 - Z-axis travel [mm]: 460 - Table length [mm]: 860 - Table width [mm]: 400 - Tool holder: BT40 - Max. spindle speed [rpm]: 15000 - Options: Probe - Transport dimensions: 2200mm x 2700mm x 2500mm (l x w x h) Hjdpfxexdc Sze Abrsfc - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, Tiltable -45/+45°, Hsdpfx Aeykar Hjbrjfc electronic height and tilt adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, digital display on spindle moulder fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price €18,700 Available approx. September 2026 Transport possible at an additional cost!

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Hodsw A Af Ispfx Abrefc Good condition

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Grain mill grinding turbine Stone mill for cereals, legumes and spices Table machine wood Corundum ceramic grinding stone Output: approx. 100 g / minute Degree of grinding: Infinitely adjustable from very fine to coarse Funnel collection approx. 1.3 kg grain Connection 220V, 360 watts Dimensions: 208 x 242 x 380 mm, WxDxH NEW machine with warranty Visit us at the Milbrandt outlet shop Hodpfx Absfmcimorefc

Condition: new, Year of construction: 2026, 600 mm 500 mm 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min Hfodpfeyiu Rzex Abrjc DIN 2080 ISO 40

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, total height: 2,220 mm, total width: 2,300 mm, total length: 1,990 mm, table width: 400 mm, table length: 800 mm, table load: 300 kg, overall weight: 2,200 kg, CNC milling machine EMCO - FB 450 MC MACH-ID 9401 Make: EMCO Type: FB 450 MC Control: Siemens 828D ShopTurn Year: 2019 Universal milling machine with toolmaker precision  Small-batch production to complex workpieces Vertical milling head with hydraulic tool clamping Y and Z Milling Handwheel in all three axes Linear guideways in all three axes Workspace guard retractable with large chip shield Main motor with spindle brake    X - Travel: 450mm Y - Travel: 400mm Z - Travel: 350mm Table Length: 800mm Table Width: 400mm Table load: 300 Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:5000mm/min. Feed rate Z-Axis:5000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:10kW Speeds / ranges:5000Rpm Length: 1990mm Width: 2300mm Hfedpfx Abeyiafbjrsc Height: 2220mm Weight: 2200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year of manufacture: 2008 - Cutting time: 13,900 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm Hfodpfx Aeyiu Dbobroc - Sub spindle: 5,000 rpm - ATC 60 system HSKA-63 (60 tools) - Geometry in very good condition - Marpos tool sensor - Chip conveyor & coolant system with small band filter unit - Optionally extensive tool accessories available

Condition: good (used), Year of construction: 2007, operating hours: 24,276 h, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Centre distance: 1,250 mm Swing over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range - main spindle: max. 3,000 rpm Spindle bore: 90 mm Hfedpfsykbk Rox Abrjc Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 positions Total power requirement: 42 kVA Machine weight approx.: 5.0 t Space requirement approx.: 3.6 x 2.14 x 1.95 m Accessories: Rinsing gun, Schunk chuck 315 mm, Tailstock MK 5

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - interface for bar feeder - signal light (3-color LED) Hfsdpfxeyki Taj Abrjc - reinforced coolant pump - chip conveyor - standard MAZAK tool package

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. Hodpfxeyiz T Ns Abrsfc The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: like new (used), Year of construction: 2018, operating hours: 3,666 h, functionality: fully functional, turning length: 685 mm, turning diameter over cross slide: 650 mm, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle nose: A2-8, overall weight: 5,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is operational and set up in our showroom, and can be inspected by appointment! This DMG MORI CLX 450 V3 comes standard with: - 19" SlimLine PLC with TouchScreen. - Siemens electronic handwheel. Hedpfoyh Inhex Abrefc - Chip conveyor. - High-pressure pump (12 bar). - Unused 3-jaw chuck (SMW AUTOBLOK KNCS-N-260-78 Ø260). - Various VDI-40 tool holders (static). - MARPOSS measuring arm incl. calibration holder (VDI-40). - Mechanical preparation for mist extraction unit. - Double foot pedal for clamping/unclamping main spindle. - Rinsing gun (5 bar) - Original DMG documentation. - Set of chemical anchors.

Condition: used, Price: On request Drilling machine, horizontal boring machine  Model: Conventional Manufacturer: WMW Union Type: BFT 90/3-2 Including rotating table Including digital readout Including multiple belongings X-Z travel: 1600x1000 Y-travel (up-down): 1050mm W-travel: 710mm Spindlemotor: 11kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Table: 1000x1120mm Machine-weight: 9000kg - Documentation available: No - CE certificate present: No Hjdpfxewnhi Ae Abrofc - Serial number: 90/3-2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1996, total height: 2,570 mm, total length: 3,520 mm, total width: 2,350 mm, Empty weight: 6.000 kg Price: On request - Year: 1996 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: M2058 Hfjdjw Slaxepfx Abrsc - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Fanuc - Control system type: 18-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 750 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 450 - Table length [mm]: 900 - Table width [mm]: 420 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 8000 - Transport dimensions: 3520mm x 2350mm x 2575mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request Hfedpsxta Niefx Abrec - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 16,000 mm, total width: 1,100 mm, total length: 1,500 mm, Empty weight: 1.000 kg Milling machine miller, mill Model: Conventional Manufacturer: Deckel Type: FP2 Travel: 400x270x400mm Spindle-speed: 40-2000 pm Table: 700x330mm Spindle-take: ISO40 Motorpower: 2,2kW Machine-dimensions: 1500x1100x1600 Machine-weight: 1000kg. - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 2.2 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 270 - Z-axis travel [mm]: 400 - Table length [mm]: 700 - Table width [mm]: 330 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 1500mm x 1100mm x 16000mm (l x w x h) - Transport weight [kg]: 1000kg Hfsdpox S Eayefx Abrjc - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1992, condition: used, Empty weight: 3.800 kg Dimensions (LxBxH): 210 x 260 x 260 cm - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 610555 - Drive system: CNC Hedpfx Aoxb Rwgebrefc - Control system brand: Fanuc - Power [kW]: 7.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 610 - Y-axis travel [mm]: 460 - Z-axis travel [mm]: 510 - Table length [mm]: 950 - Table width [mm]: 560 - Tool holder: BT40 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 6000 - Transport dimensions: 2100mm x 2600mm x 2600mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, total height: 2,800 mm, total length: 3,500 mm, total width: 1,800 mm, Empty weight: 13.000 kg Price: On request - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 675002 - Drive system: CNC - Horizontal/vertical: Horizontal - Number of axes [pcs]: 3 - X-axis travel [mm]: 650 - Y-axis travel [mm]: 1100 - Z-axis travel [mm]: 500 - C-axis rotation [°]: 360 - Options: Chip conveyor, Tool magazine, Probe - └ Tool magazine [pcs.]: 32 - Transport dimensions: 3500mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 13000kg - Transport packages [pcs.]: 3 Hodpfxoxqw E As Abrofc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, operating hours: 14,076 h, total height: 2,500 mm, total length: 4,200 mm, total width: 2,300 mm, Empty weight: 5.500 kg Hodpsxpv Hvsfx Abrjfc Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: M7759850937 - Operating hours: 14076 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Mitsubishi - Control system type: HARTROL-M70 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 600 - Z-axis travel [mm]: 630 - Table length [mm]: 1150 - Table width [mm]: 600 - Tool holder: BT40 - Main spindle power [kW]: 12.5 - Max. spindle speed [rpm]: 8000 - Options: Chip conveyor, Tool magazine - └ Tool magazine [pcs.]: 24 - Transport dimensions: 4200mm x 2300mm x 2500mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, functionality: fully functional, spindle diameter 125 mm x-travel 3000 mm y-travel 2000 mm z-travel 1500 mm W-axis (spindle longitudinal) 600 mm table-size 1250 x 1600 mm table load capacity - central/maximum 5000 kg Control Heidenhain iTNC 530 tool taper ISO 60 Hfsdpfxoyifnus Abroc spindle turning speed range 5 - 3000 U/min spindle drive motor 37 kW max. torque on the spindle 1646 Nm transmission ratio 2 Working hours: - Machine on: 59.078 h - Autom. cycle: 24.207 h * CNC-control HEIDENHAIN iTNC 530 * Coolant equipment * Table B-axis, 360.000 positions