Used Gb Ganz for sale (1,065)

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Nsdpfx Alecnwydjcjwh Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard equipment includes all safety fittings and an electrical connection cable with plug and Condor pressure switch Compressed air tank equipped with a safety valve, tank pressure gauge, and condensate drain valve The welded-on rear handle improves loading and transport capabilities Fully automatic operation via a pressure switch with start-up relief, motor protection, and on/off switch Featuring enhanced equipment for universal use With V-belt drive, 2 cylinders in an in-line arrangement for particularly smooth operation, and a 400 V three-phase motor with external motor protection Low compressor speed – this protects the compressor components, reduces noise levels, and minimizes vibrations Large fan impeller for optimal cooling Including filter pressure regulator for regulated compressed air that is free of condensate, dirt, and oil With a 2 m device connection cable with rubber sheathing and an air outlet via a quick-release coupling Device connection cable with phase inverter 10-year warranty on the tank against rust Technical data Pressure: 10 bar Intake capacity: 510 l/min Delivery capacity: 390 l/min Speed: 1240 min-1 Tank volume: 90 l Weight: 80 kg Noise: 97 dB(A) Njdpebyhvrefx Alcswh Dimensions (W x D x H): 1070 x 495 x 895 mm Drive power: 3.0 kW Voltage: 400 V Location: In stock at Bitburg warehouse Subject to prior sale.

Condition: new, Year of construction: 2026, Adhesive application machine / Adhesive roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Maximum passage height: 100 mm Speed: 18 m/min Working height: 900 mm Diameter of application rollers: 185 mm Power rating: 0.5 Hp 0.37 KW Operating side: right Electrical system: 400 V/50 Hz/3 phases Technical features: - Structure of the adhesive application machine made of welded sheet metal. - 1 motor for driving the two rollers Njdpfx Alsd Iz Dfscowh - Adhesive application rollers coated with acid-resistant special rubber, ground to shape and grooved, wear-resistant. - The thickness of the rubber layer can be ground to shape multiple times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to a maximum of 5 mm on the workpieces. - Adhesive dosing via a distribution trough made of zinc sheet. Easily removable for cleaning. - 1 handwheel for adjusting the roller gap - Safety guard for the rollers to prevent accidents - Electrical components according to the highest quality standard - CE standard

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Nwodpfehkz Hmex Alcoh Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Njdei Am U Djpfx Alcowh Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Year of construction: 2026, condition: new, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Nwedpsyr R Hwsfx Alcjh Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck -

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Njdpfohp Rdlex Alcjwh Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Hebrock F 4 Njdpfxohqadcj Alcewh For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Nwjdehk Dfkepfx Alcjh Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko Clean Air Dust Extractor Exhibition model Sold at a special price Technical data, Power Unit 250 P Suction nozzle: 250 mm Engine rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow rate: 4900 m³ / h Rated volume flow rate: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Nwjdpfx Aocdr Enolcoh Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale.

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Nwsdpfjcnxamsx Alcjh Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Cutting height max. 90° with scoring blade: 100 mm Cutting height max. 45° with scoring blade: 79 mm Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Nwedobtnftjpfx Alcoh Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Nsdpsbunq Hsfx Alcjwh Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Location: 54634 Bitburg Available immediately

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Nwodpjbuqn Hefx Alceh Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: new, Year of construction: 2026, Holzkraft bandsaw HBS 533 S. Heavy-duty professional model with high weight for maximum smooth operation. Particularly quiet and precise operation thanks to a torsion-resistant machine housing. Large, one-piece cast iron saw table, swiveling from 0° to +20° with a ground and polished surface. Patented table tilting mechanism with handwheel and rack and pinion. Saw blade quick-release tensioning system. Ceramic saw blade guide rollers. Large cast iron parallel fence. Fast and precise adjustment of cutting height via handwheel and rack and pinion with millimeter scale. Safety switch for automatic shutdown when the door is opened. Large cast iron parallel fence. Comes standard with a miter gauge. Flywheels made of cast iron with a special coating on the running surfaces. Inspection window for checking the saw blade run. Professional saw table guide. The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack and pinion guide. The tilt is continuously adjustable from 0° to +20°. Patented. Nwjdsb S Uzkopfx Alcoh Work table dimensions: 750 x 530 mm Cutting speeds: 1400 m/min. Flywheel diameter: 530 mm Max. cutting height: 350 mm Max. cutting width with fence: 465 mm Max. cutting width without fence: 510 mm Bandsaw blade length: 4190 mm Precision guide: top / bottom Saw table tilt: 0° - +45° Motor power 400 V/50 Hz/P2: 4.0 kW Weight: 305 kg Dimensions: 1000 x 720 x 2040 Dust extraction port diameter: 2 x 100 mm Location: In stock, Bitburg.

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Nwedpfx Aljr Ig H Tocsh Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Nodpfx Alelht Htecswh Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Exceptional special price, as it was used at our in-house trade fair. Operating hours: 2 Immediately available – subject to prior sale. First come, first served. Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. A special feature is the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful pressing mechanism with wear-resistant, chrome-plated jaws Pre-compactor with end-position dampened cylinder and bolted cover Switchgear with PLC control Hydraulics Separate oil tank with pump motor and valve control Nodpfx Alelht H Eecswh Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Nedpfxofig Rws Alcewh Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing Nodju I R Utjpfx Alcjwh - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2024, Holzkraft Edge Sander Type: KSO 200 F with Veneer Sanding Attachment Sanding unit can be swiveled up to 45° via a lever The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for better sanding results Oscillation can be switched on/off as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire width of the sanding belt Height-adjustable auxiliary table with dust extraction for sanding radii The spring-loaded belt tension automatically compensates for belt length differences. With double dust extraction Nedpfxolht H Ns Alcswh Extendable roller table extension With rubber-coated sanding roller Veneer edge sanding attachment with contact shoe with fine adjustment, relief rollers and guide rails With grooved infeed guide for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding is possible Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection for dust extraction Dust extraction nozzle diameter 140 / 100 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Power of drive motor 3.0 kW Connection voltage 400 V Sanding unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt running speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Nwedjh Hnp Dopfx Alcoh Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap • Integrated automatic extinguishing system Nedpfxehkzt Ne Alcewh Technical data: • Motor rated power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Subject to prior sale

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) Nedpfx Ajh Eiw Ijlcjwh - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Nwedpjtnz Ttofx Alceh Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg