Used Gear Deburring Machine for sale (68,837)

Condition: ready for operation (used), Year of construction: 2015, A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Bwodpfx Asx Dm D Isfpoh

Condition: used, Year of construction: 2018, operating hours: 3,550 h, functionality: fully functional, Used machine Year of manufacture: 2018 Technical Specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0–100 mm Speeds 1st unit, frequency-controlled: 5–15 m/sec 2nd unit, frequency-controlled: 6–17 m/sec Feed speed, frequency-controlled: 0.2–8 m/min Electrical Main motor 1st unit – W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit – W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Bedpfx Afjx I Ed Repswh Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Dust extraction per unit Required capacity with 100 mm connection: 6,100 m³/h Machine weight: 3,750 kg Accessories / Special features Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction unit Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Incl. H14 filter - Incl. EX version for aluminum - Incl. sludge container

Condition: new, Year of construction: 2023, total length: 13,000 mm, total width: 8,000 mm, total height: 17,000 mm, workpiece weight (max.): 500 kg, overall weight: 600 kg, BMZ Manual Deburring Machine BMZ M1 Bedpfx Aforp Dp Nepswh Thanks to its vacuum table, the BMZ M1 allows for simultaneous deburring of multiple parts by hand. Two different brushes can be installed on the system, and changing the brushes is very quick and easy. Because the brush is positioned parallel to the table, it enables more even grinding. The system's motor weight is balanced, making it ergonomic for the operator. With the BMZ M1, you achieve maximum quality at a minimal cost. Application Areas Edge Rounding Deburring Slag Removal Oxide Layer Removal Polishing

Condition: reconditioned (used), Year of construction: 2017, operating hours: 3,862 h, functionality: fully functional, Used machine Year of manufacture: 2017 General Specifications: Max. working width sanding belt unit: 1350 mm Sanding belt dimensions (W x L): 1380 x 1900 mm Outside brush diameter: 350 mm Table opening: 0 – 100 mm Minimum workpiece size: 50 x 50 mm Feed speed, frequency-controlled: 0.5 – 8 m/min Electricity 1st Unit – W – sanding belt: 11 kW 2nd Unit – RB – rotary brush unit: 1.5 kW Brushes: 4 x 1.5 kW (6 kW) Feed motor, frequency controlled: 2.6 kW Vacuum pump: 15 kW Electrical connections: 400 Volt Frequency: 50 Hz Compressed air only for sanding belt unit Required air pressure: 6 bar Consumption: 160 l/min Dust extraction at 100 mm WS Sanding belt unit: 2000 m³/h Vacuum pump: 1500 m³/h Weight: approx. 6000 kg Bwedpfjw Dzytjx Afpjh Includes one set of brushes and starter set of sanding belts. New extraction system optionally available. Machine has been technically overhauled (conveyor belt and bearings are new, value approx. €20,000) Immediately available.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Equipment: - 1st sanding belt for grinding/deburring - 2nd set of 8 rotary brushes for edge rounding - 3rd sanding belt for finishing - Vacuum table for improved adhesion of small parts Technical data: Max. workpiece width: 1300 mm Conveyor belt speed: 0.5 - 7 m/min Max. table load: 700 kg Min. workpiece size (W×L): 50×50 mm Max. workpiece height: 0.5 - 100 mm Bwodpfx Afsx I Nugjpeh Abrasive belt dimensions (L×W): 2200 × 1320 mm Rotary brushes: 8 pieces Rotary brush dimensions: 300² × 40 mm Electrical input: 400V|50Hz|240A Rated power consumption: 79 kW Machine dimensions (L×W×H): 4.2×2.25×2.3 m Machine weight: 5700 kg

Condition: used, Year of construction: 2007, functionality: fully functional, Used machine Year of manufacture: 2007 Working width: 1000 mm With vacuum conveyor belt Bwedpfx Afjx I Hihopjh Including vacuum pump Fladder brushes, grit 100 + additional set of brushes, grit 100

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, - Machine equipped with one sanding belt and a rotary brush - Magnetic track Technical specifications: Max. workpiece width: 300 mm Max. table load capacity: 100 kg Max. workpiece height: 0.5–100 mm Min. workpiece size (W × L): 50×50 mm Conveyor belt speed: 0.5 – 7 m/min Sanding belt dimensions (L × W): 1650 × 320 mm Rotary brush: 300 × 40 mm (1 unit) Rated power consumption: 11.5 kW Bodpfxjx I Nu He Afpswh Electrical input: 400V|50Hz 34A Machine dimensions (L × W × H): 2.15×0.70×2.00 m Machine weight: 1300 kg

Condition: new, Year of construction: 2025, -TFON Lite SURFACER® Series. Bedpeqzxhyjfx Afpjwh The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications. -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm.

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Bodpfjv N I Hljx Afpewh Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Bwedpjx Uwlajfx Afpeh Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 337794, Offer 25367 Technical data: - Drilling capacity: 25 mm - Tapping capacity: M16 - Drill spindle mount with clamping nut: MT3 - Drill spindle speeds: 100 / 205 / 330 / 420 rpm, 665 / 850 / 1375 / 2775 rpm - Drill unit height adjustable via hand crank - Minimum / maximum table-to-drill/milling spindle distance: 60 / 390 mm - Drill spindle stroke: 130 mm - Fine spindle feed adjustment via handwheel - Drill spindle reach: 260 mm - Drill/milling head tiltable left & right by 45° each - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel: X-axis 415 mm, Y-axis 155 mm - Machine vice included Bodpfx Aox Tq Irjfpowh - Drive: 400 V / 0.65 / 0.9 kW - Required space (approx.): W 900 x H 1800 x D 700 mm - Weight (approx.): 270 kg

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co Bwodpfex H Tvfjx Afpjh - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. Bedpfexylm Hjx Afpewh - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Bsdpjw Rf S Sefx Afpewh Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA Bedpfsukitxjx Afpjwh total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Year of construction: 2002, condition: used, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1,5 control Sinumerik 840C tooth width 5,5 mm spiral angle 0/60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm Bedpfx Afjgtvbpspowh blade head turning speeds 20-110 1/min total power requirement 100 kW weight of the machine ca. 16700 kg dimensions of the machine ca. 5200x2300x2400 mm

Year of construction: 2007, condition: used, max. wheel diameter 400 mm gear width - mm max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron) Bodpfjgr Harjx Afpewh

Condition: used, Year of construction: 2006, max. wheel diameter 2 - 45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 weight of the machine ca. 2,2 t control Fanuc 18i-MB max. workpiece length 250 mm weight of the machine ca. 2200 kg Milling cycles: - straight, helical, crowned gearing - radial, radial-axial, climb and conventional milling, roughing, finishing - worm wheels, straight-toothed bevel wheels, face gearing (option: only in partial process) Technical Details: - maximum workpiece length 250 mm - maximum toothing length 150 mm - maximum module in steel 1 mm (gear hobbing) - maximum module in steel 1.5 mm (worm milling) - maximum module in steel 0.5 mm (bevel gear hobbing) - milling cutter diameter 16-32 mm (gear hobbing) - milling cutter diameter 40-63 mm (worm milling) - maximum setting angle of milling head ±45 deg. (Rolling) - maximum setting angle of milling head ±30 deg. (worm milling) Bjdpsvq Sfzefx Afpowh - Shift travel 34 mm (CNC axis) - Collet / retraction mandrel W20 - maximum speed of the workpiece spindle 770 rpm. - milling spindle drive 0.55 kW - Maximum speed of the milling spindle 8000 rpm. CNC axis drives: -X-axis = plunge travel 80 mm -Z-axis = longitudinal feed travel 190 mm -C-axis = workpiece axis 360 deg. -Rapid traverse X/Z 6 m/min. -Hydraulic unit 0.37 kW -Dimensions 2100 x 1440 x 1700 (LxWxH) Options: -CNC shift axis 34 mm -Adjustment angle with CNC axis -Deburring device Accessories: - spiral conveyor

Condition: used, Year of construction: 2003, max. wheel diameter 600 mm gear width 92 mm max. module 8 mm max. ram stroke 100 mm table diameter 400 mm workpiece dia. 600 mm Shockable standard module max. 8 mm angle adjustable from - to -0,5 / +0,5 Grad Bjdpfxovzhfls Afpjwh stroke range 80 - 1200 Hübe/min feed radial axis machine column 1 - 3750 mm/min Accessories: - Various stop blade holders - Various clamping devices

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard Bodpfxjw Dp Eko Afpowh PAINTING: * Colour in RAL 5011 & RAL 7036 * Epoxy paint is used to ensure long-lasting coating durability.

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Bsdpfx Aforkl Unopjwh Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm

Condition: used, Year of construction: 1992, max. wheel diameter 175 mm gear width 710 mm max. module 4,5 Bwedpfx Ajvzhfrjfpsh min. module 0,5 weight 4,5 t total power requirement 10,5 kW Equipment/accessories: - Milling arbors - Clamping devices - Documentation

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm Bwedpjvzhf Sefx Afpjh gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation Bwjdew Rf S Eopfx Afpjh

Condition: used, Year of construction: 2008, tip circle diameter 650/800 mm workpiece length - max. 1100 mm max. module 20 (25) mm Bwsdow Rrbyepfx Afpsh min. module 0,5 mm control Siemens Sinumerik 840 D total connected load 62 kVA helical angle -45 / + 120 ° weight of the machine ca. 10 t