Used Glass Tempering for sale (4,172)

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Dksdsyfrvyopfx Ak Ajw Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: used, Year of construction: 2010, machine/vehicle number: GG710C-18759, functionality: fully functional, input voltage: 400 V, input current: 8 A, type of input current: three-phase, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, overall weight: 850 kg, drill diameter: 140 mm, pressure: 6 bar, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Dsdpfxeyc Egys Ak Aekw

Condition: used, Year of construction: 2007, functionality: fully functional, input current: 73 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, We offer this used Glaston Bavelloni MTS64 glass cutting desk, year of construction 2007. Dedpfsyzxf Usx Ak Askw Voltage: 400 V Phase: 3 Frequency: 50 Hz Power: 29 kW Current: 73 A If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit Dedpfx Ajy Hkd Hjk Askw For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 7,700 mm, total length: 19,300 mm, Year - 2016 Model - 630 CBM and 353BCS-R 4 station double loader Cutting , grinding, marking and breakout. Tilt function Shape scanner Djdpfxeyc Uq Ij Ak Askw Perimeter fencing for loader Delivery and Installation available.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 6,490 mm, total width: 3,220 mm, Bottero CNC Year - 2022 Model - Pratica Plus 3300 Automatic tool changer Complete with all tooling and spares Excellent condition as it has done minimal work Djdsydbigspfx Ak Aokw Delivery and Installation available.

Condition: ready for operation (used), Year of construction: 2012, Professional automatic machine for rinsing glass and plastic bottles using filtered water. Manufacturer: WAB s.r.l. (Italy) Model: ADV R00 R1 8-40-110-110 Number of grippers: 40 pcs Output: approx. 8,000 bph Stroke: 110 mm Control: Siemens PLC Year of manufacture: 2012 Djdpfoyxxaysx Ak Askw Technical condition: Used machine, regularly serviced, fully operational at the time production was stopped.

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Hersteller: GAMMAFLUX Typ: GS1G030F024S4EJ Dkjdpfx Akjyxxz De Aow Baujahr: 2019

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzvbf01, Equipment: CE marking, Automatic vial bottle filling machine.this machine type normally customized by the customer vial bottle type and requirement of the production .It widely used for the pharmaceuticals and industry. Dodpfxsx Tg Tqe Ak Askw Filling and Capping: The process involves automatic bottle loading, automatic capping, automatic filling, automatic capping, and bottle discharging, all completed without human contact. It employs a peristaltic pump for filling and a servo control system; the equipment's transmission is fully servo-controlled. The capping torque is adjustable. The equipment is equipped with a buffer tank and a weighing function (Mettler-Toledo electronic scale) to control the liquid level by weight. It also features a magnetic stirring function. All parts in contact with materials are made of 316L stainless steel, conforming to GMP standards.

Condition: used, Year of construction: 2005, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P160/9/SG51/1K/RT50 Baujahr: 2004 Dedpfx Akexyt Tzj Aokw Medium: Wasser Temperatur: 160° C

Condition: new, functionality: fully functional, Year of construction: 2026, BEFARD XPR500 glass and sandwich panel vacuum suction cup Maximum load capacity 500 kg 1 pc. suction plate 800x400 Remote contro l Single-circuit vacuum system Battery power supply Hook mounting bracket Transport trolley with wheels adapted for transport on stairs Dsdpfx Akov I Tcvo Ajkw A choice of colors.

Condition: new, Year of construction: 2026, Befard glass assembly robot model XC820.3: RADIO CONTROL AS STANDARD!!! TECHNICAL SPECIFICATION: • Lifting capacity 820 kg • Three hydraulic extensions giving a vertical reach of approx. 5.7 m - available models with a reach of 3.9 m and 4.8 m • 8 vacuum suction cups • Two supports - right and left side • Additional support wheels at the front - only for the XC820.3 model • Dual-circuit vacuum system • Power supply with AGM batteries • BEFARD radio control of the robot • Manually rotating frame with suction cups - locking at every 90-degree turn - hydraulic rotation for an additional fee • Side shift of the frame with suction cups (right, left 10 cm - hydraulic) • Tilting frame with suction cups to the sides (relative to the device - manual) -- hydraulic rotation for an additional fee • Tilting frame with suction cups (can be lifted element from the horizontal plane and hydraulically verticalizing it) ADDITIONAL OPTIONS: • HS spacers Dedpov I Ut Nofx Ak Askw • twin wheels • filled wheels • valves • hook • hydraulic frame rotation with suction cups • hydraulic frame tilt to the sides with suction cups • forks • LED lamp • narrowing the width to 78 cm • anti-overload system Own weight - approx. 1000 kg Possibility to choose the color

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Dedswikn Ropfx Ak Aokw Gas filling press: Models and triple available

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: ECO, total width: 1,000 mm, total length: 2,000 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, inner dimension height: 450 mm, Type: ECO Manufacturer: RCN ENGINEERING Year of production: 1999 Internal kiln dimensions: 2000 x 1000 x 450 mm Dksdpfswtpf Aex Ak Ajw NOTE: Glass fusion molds are included with the kiln.

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Dksdpfx Aksxxaits Aow

Year of construction: 2023, condition: excellent (used), functionality: fully functional, QUATTROLIFTS VECTOR 500 OFF ROAD Glass transportation and installation machine Dual vacuum system for extra safety of handling the glass Rotates and tilts glass Adjustable vacuum cups Maximum lifting capacity: 500 kg Transportation frame included More technical information can be found attached as Tech. data file Excellent condition As is See video Available immediately Dkjdpfx Aoq Ih Tkjk Ajw

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: Dodpfx Asq I N H Nok Askw - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: good (used), Year of construction: 2006, System with pump and water basin, Two spindles need repair. Swivels up to 60°, Working direction: from right to left, max. height: approx. 2500 mm, Depth: approx. 1000mm, Length: approx. 6200mm, Available at the beginning of October. Dsdpsrz Rgzefx Ak Aekw

Condition: like new (used), Demonstration device for customers and trade fair presentation Heat loss palpable (by laying hands on different insulating glass) Device can be moved by wheels Dodpfslz N A Esx Ak Ajkw H = 1000 mm L = 1700 mm B = 600 mm Weight: 120 kg

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Dksdpfx Aerhkp Esk Ajw Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: GG65LC-13642, input voltage: 380 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 543LMT-J: PLF float glass cutting table with Low-e coating grinder LMT. SN: GG65LC-13642 (2600Kg-39.1A-10kA) from 2007. Bottero 352 BCS at the end of the cutting/grinding line as a break-out table. SN: GG60SB-3040 (2250Kg - 50Hz - 14.5kVA-380V) from 1995. Dsdpfx Ajw I Dvksk Ajkw

Condition: used, Year of construction: 1984, with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydraulically controlled bottle carrier and pressed against the sealing cone on the filling valve. The valve sleeve moves as far as it will go in the valve body, opening the product outlet. The air inside the bottles is discharged through an air tube, creating a vacuum in the bottle equivalent to the vacuum above the product level in the container. The product flows into the bottles by gravity until the fill level reaches the air tube. The bottle is then lowered and the product outlet is closed. Dkedpfxsw Tmmvo Ak Ajw Additional title: hot filling Capacity of filling line: 5000 bo/h Number of filling valves: 24 pcs Length: 1,64 m Width: 1,20 m Height: 2,10 m Formats: Round bottles, diameter 60 - 92 mm, height 100 - 265 mm Running direction: left -> right Features: 24 filling valves from stainless steel, height adjustment, vacuum blower

Year of construction: 1992, condition: good (used), Max. Ladegewicht: ca. 5 t Breite: ca. 4000 mm, Höhe: ca. 3800 mm, Tiefe: ca. 600 mm, Transport Maße: Breite: ca. 2000 mm, Länge: ca. 3800 mm, Dkedpsu Ava Defx Ak Aew Höhe: ca. 1200 mm, Gewicht Netto: 450 kg.

Condition: good (used), JKV Hermes JKV100 Chocolate tempering machine Dsdpfowcrqyox Ak Aekw Serial: 15070597 2015, Stainless, chocolate tempering moulding machine with vibratory table, adjustable temperature controls, mobile, 3Ph

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Dodpfxjw R Tvxo Ak Ajkw