Used Gleaner R 72 for sale (67,526)

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 Dkjdpfxjk Abwlo Al Usn RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: ready for operation (used), Main drive unit of a Jensen Senking P72 Dkedpfx Aloy Ukq Aj Ujn SEW Eurodrive K127 UV2001.4

Condition: used, Module carriers, subracks, terminal blocks, spring clips, controls, switchgear, PLC Djdsdnin Njpfx Al Uekn -Module carrier lengths: 2x 534 mm 1x 380 mm -Field terminals: 36-pin and 72-pin -Weight: 2.8 kg

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Dodpfxjmnqkio Al Uskn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 4,429 h, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, battery weight: 1,558 kg, TECHNICAL DETAILS Fuel type: electric Front tire size: 21x8-9 (50%) Rear tire size: 7.00-12 (70%) MACHINE DETAILS Battery Nominal voltage: 80 V Nominal energy: 47.1 kWh Nominal capacity: 620 Ah Weight: 1,558 kg Cell type: 4 TPzS 620 Dksdpfx Aljza Dnks Uen Operating hours: 4,429 h

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio Dkedpfx Asu T Hrvol Usn -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, mileage: 850 km, power: 152 kW (206.66 HP), first registration: 02/2025, fuel type: diesel, empty load weight: 4,065 kg, maximum load weight: 3,135 kg, overall weight: 7,200 kg, wheelbase: 5,100 mm, next inspection (TÜV): 05/2027, fuel: diesel, color: black, driver cabin: other, gearing type: automatic, emission class: none, suspension: air, number of seats: 3, loading space volume: 37 m³, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, maximum speed: 90 km/h, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, soot filter, spoiler, tail-lift, traction control, trailer coupling, * German new vehicle (850 km driven) * Vehicle ID No.: ZCFC872F405593941 Technical specifications: * Overall length: 8550 mm Dkedpfx Aljzb Nzfj Uen * Overall width: 2550 mm * Overall height: 3600 mm * Permissible total weight: 7200 kg * Unladen weight: 4065 kg * Payload: 3135 kg * Trailer load: 3300 kg Container: * Length: 6100 mm * Width: 2500 mm * Height: 2450 mm Delivery throughout Germany possible! Trade-in possible! Leasing and financing also possible without a down payment. Errors, printing errors and prior sale excepted.

Condition: used, LEUZE CML720i-R05-1600.R/PB-M12 Light curtain receiver Item no.: 50122897 Dksdsy Suypspfx Al Ujn

Condition: used, LEUZE CML720i-T05-1600.R-M12 Light curtain Transmitter Dkodpfx Asy Sut Asl Ujn Item no.: 50119468

Condition: excellent (used), mileage: 351,906 km, power: 382 kW (519.37 HP), first registration: 01/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,400 mm, loading space width: 2,480 mm, Year of construction: 2017, Equipment: crane, retarder, = Additional options and accessories = - Intarder - PTO = Remarks = YS2R8X40002124470 = More information = Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 25.751 kg Carrying capacity: 13.249 kg GVW: 39.000 kg Functional Crane: PALFINGER PK72002 C Make of bodywork: PALFINGER 72002 Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Dkjdpfxjzal Tbe Al Usn IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2024, condition: new, Here a new AD-R 37220 is offered:Bending force: 220 tonsBending length: 3700Pass between uprights: 3100 mmHub: 265 mmInstallation height: 530 mmExtension: 410 mmTable height: 900 mmTable width: 104 mmY Fast speed: 160 mm/sec.Y Working speed: 10 mm/sec.Y Withdrawal speed: 120 mm/sec.X axes Working speed: 250 mm/sec.R axes Working speed (manual): 250 mm/sec.R axes Travel: 250 mm/sec.X axes Distance: 650Length: 4950 mmWidth: 1770Height: 2900Total weight: 14100 kgOptions:CE with manual F.AKAS II M -FPSC-B-C Safety cover Dkedpfx Aed S I R Tjl Ujn

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 380 V, We are offering two used Adelco DL 180G-3 Dual 72 double dryers, manufactured in 2018 & 2019. The dryers can also be purchased individually. Please send a private message. Manufacturer: Adelco Model: DL 180G-3 Dual 72 Year of manufacture: 2018 & 2019 Condition: used Voltage: 380 V Frequency: 50/60 Hz Dedpszai Tfefx Al Uskn Power consumption Pmax: 7 kW Max. rated burner heat capacity per burner: 75 / 65 kW Heat output per burner: 250,000 / 225,000 B.T.U. Gas connection pressure (natural gas): 20 mbar Gas connection pressure (propane): 37 mbar Gas connection connection (natural gas): 3/4" Gas connection connection (propane): 1/4" Burner operating pressure (natural gas): 2.6 / 6.6 mbar Burner operating pressure (propane): 2.1 / 10 mbar If you have any questions or need more information, please send us a message or call us.

Year of construction: 2005, condition: used, machine/vehicle number: 15-230068, With digital display Dedpjy Sqkqefx Al Ujkn

Year of construction: 2014, operating hours: 5 h, condition: like new (used), functionality: fully functional, grinding spindle speed: 16,000 rpm, IMT Spindle Type DRESS 72 - 37 - Absolutely like new For truing profile grinding wheels, incl. motor connection cable and spindle bracket. According to the manufacturer, highest precision and smooth running during the truing process of CBN grinding wheels. HF Spindle Dress 72 - 37 Spindle housing: 72 mm Speed up to 16,000 rpm (clockwise/counterclockwise) Power S1 100%: 0.5 kW from 11,500 rpm Power S6 40%: 0.8 kW from 11,500 rpm Motor type: Asynchronous, 3-phase Number of poles: 4-pole Power consumption: Voltage: 230 Volt Current S1 100%: 2.0 Ampere Current S6 40%: 3.5 Ampere Current (max): 6.0 Ampere Frequency up to 533 Hz Spindle ball bearings: Hybrid ceramic Bearing lubrication: Lifetime grease-lubricated Cooling: bracket cooling Purge air + labyrinth: 1 bar, approx. 50 l/min Temperature monitoring: PTC Tool holder: Ø 40 h2 Manual tool clamping Electrical connection (motor): 8-pin plug Axial supply connections Weight: approx. 4.7 kg Motor cable: 8+PE KD /-.10 Spindle bracket 72 complete Aluminum, black anodized Reducing sleeve 80 / 72 Dressing spindle for mounting dressing rolls on CNC grinding machines Profiling in grinding wheel Operating instructions available Spindle was used for trials on the machine. Price / details upon request. All technical data subject to error/typos. Sale exclusively to countries of the European Community. Dedpjgl Arrsfx Al Ujkn

Condition: used, mileage: 237,462 km, power: 154 kW (209.38 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 3,700 kg, maximum load weight: 3,500 kg, overall weight: 7,200 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 3, loading space volume: 18 m³, loading space length: 3,917 mm, loading space width: 2,074 mm, loading space height: 2,256 mm, Equipment: ABS, cooling unit, cruise control, electronic stability program (ESP), onboard computer, soot filter, traction control, Iveco Daily 72-210 E5 with meat refrigeration - Refrigerated box body - Meat - Refrigeration unit: TK 300 MAX - Electrical connection - FRC manual transmission - Active cruise control - ABS/ASR/ESP - 3 seats Dksdpfxey T Rb Ss Al Usn - EURO 5 - Air conditioning - Dual tires - Tires: 225/75 R16 Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our listings, as this is independent of the location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 7,970 h, lifting height: 7,200 mm, mast type: triplex, construction height: 3,250 mm, fork length: 1,400 mm, Sideload forklift Dsdpfey Tzwwex Al Uskn Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good

Condition: new, Year of construction: 2025, machine/vehicle number: 2512377, fuel type: diesel, motor manufacturer: JCB 448 TWGA, General information Field of application: Construction Weights Empty weight: 1.250 kg Functional Generator capacity: 80 kVA Dimensions of cargo space: 163 x 80 x 125 cm CE mark: yes Other information Generator: Mecc Alte ECP34 1s4 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Emission level: Stage V / Tier IV final Additional information Please contact Team DPX for more information = Additional options and accessories = Dkodex Tyx Topfx Al Ujn - Control Panel

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks The machine is isobaric Dkjdpovtgaxjfx Al Uen

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. Dkedpfx Aexx R S Ejl Uen - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: WORKING

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT Dkjdpfexx Sawsx Al Usn # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: FC24DE9128, type of input current: three-phase, total width: 2,800 mm, total length: 1,800 mm, input voltage: 400 V, input current: 32 A, working width: 1,800 mm, total height: 1,800 mm, repeat accuracy: 0.1 mm, feed rate Z-axis: 100 m/min, cutting width (max.): 1,800 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, For sale is a high-end Lectra Vectorfashion automatic CNC fabric cutting system, model VT-FA-Q2-72. This system represents modern industrial cutting technology and has been taken into use at the beginning of 2025. The system has been used in professional garment production and is designed for high-volume, precision cutting with full CAD/CAM integration. It is a complete large-format cutting solution including vacuum table, automated cutting head and computerized control system. The machine is fully operational and has been recorded in production use on 05.03.2026. Originally purchased new for approximately 125,000 EUR. Technical Details • Manufacturer: Lectra • Model: Vectorfashion VT-FA-Q2-72 • Type: Automatic CNC fabric cutting system • Year: 2024/12 • Control: Computerized CNC system (VectorControl environment) • Cutting type: High-speed knife cutter • Vacuum cutting table with hold-down system Dedpfx Aoy Akbqjl Uskn • Multi-layer cutting capability • Industrial servo motors • Full CAD/CAM compatibility Electrical & Connections • Type of input current: 3-phase (3-Phase + Neutral + Earth) • Input voltage: 400 V (EU standard) • Input current: approx. 32 A (depending on vacuum turbine configuration) • Compressed air connection: 6 bar (dry, oil-free air required) Dimensions & Working Area • Working width: 1800 mm (72”) • Max cutting width: 1800 mm • Max cutting height: approx. 25 mm (compressed with vacuum) • Total width: approx. 2800 mm (incl. electrical cabinet and access space) • Total length: approx. 4500 – 5500 mm (depending on unloading table configuration) • Total height: approx. 1800 mm Performance & Accuracy • Feed rate (X/Y axis): up to 100 m/min • Repeat accuracy: ±0.1 mm (industrial IX-series standard) Key Features • High-speed automated CNC cutting • Precision multi-layer processing • Advanced vacuum hold-down system • Modular cutting bed design • Fully computer-controlled operation • Integrated safety and emergency stop systems • Industrial-grade construction for continuous production Condition Used production condition Operational and tested in real production Inspection possible prior to dismantling Sold as-is, where-is, without warranty Line Integration The system has been operated as part of a complete cutting line together with • 30 C – Finn-Convoy Spreading / loading system • 32 C – Gerber Conveyor / table system All units are available separately or as a complete production line Applications • Garment factories • Denim production • Workwear and uniform manufacturing • Technical textiles • High-volume automated cutting environments Location Valga, Estonia Dismantling and transport Buyer responsible Professional dismantling recommended due to system size

Condition: used, mileage: 330,000 km, fuel type: diesel, Year of construction: 2018, IVECO DAILY 72-18, year 2018, EURO 6, refrigerated box with internal dimensions 5.20 x 2.15 x H2.10 m, capacity for 10 pallets. Movable partition wall, THERMO V600 MAX fridge unit, road and mains operation, temperature recorder, ATP FRC valid until 06/2027 (renewable). Dhollandia retractable tail lift, 1,000 kg capacity. New tires, automatic transmission, air conditioning. Financing or leasing available on site. Djdpfxjy Dt Rqs Al Uokn

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,010 h, power: 198 kW (269.20 HP), motor manufacturer: John Deere, gearing type: automatic, fuel type: diesel, maximum speed: 40 km/h, first registration: 02/2019, color: original, overall weight: 16,000 kg, front tire size: 610/70R30, rear tire size: 710/70R42, total height: 3,800 mm, total width: 3,000 mm, number of previous owners: 1, Equipment: additional headlights, air conditioning, cabin, compressed air brake, cruise control, differential lock, fridge, front linkage, front power take-off, hydraulics, lighting, non-smoking vehicle, rear power take-off, seat heater, trailer coupling, We are selling our John Deere 7270 R tractor. The machine has been very well maintained and is in perfect technical condition. Features: - Ultimate Edition - AutoPowr transmission 40 km/h, stepless - 10-inch Command Center display with video function - StarFire receiver - AutoTrac - JD Link - Command Center 4600 processor - CommandView III cab with premium equipment - Premium radio package - Premium lighting package - Leather comfort package with heated seat - Refrigerator - Electrically adjustable exterior mirrors - AutoPowr with left-hand reverser - Hydraulic pump 223 l/min - 5 double-acting super deluxe spool valves - Rear PTO 540E/1000/1000E - Rear linkage 7,847 kg, Cat III - 3-in-1 drawbar with automatic hitch and K80 ball coupling - Load Sensing Dsdpfxjyx Arae Al Uskn - Front linkage with front PTO 1000 rpm - TLS Plus front axle with all-wheel drive - Adjustable rear axle 120 mm - Immobilizer with coded keys - Electric multifunction joystick - Rear wheel weights, cast rims The turbocharger was replaced in October 2025.

Condition: excellent (used), Julabo Julabo Transparent Circulating Bath Thermostat CT 72/P incl. ED Thermostat Item Description: For sale is a Julabo transparent circulating bath thermostat CT 72/P with Julabo ED (v2) temperature controller. This unit comes from a laboratory inventory and is in used but technically fully functional condition. The bath heats and controls temperature accurately and stably, and circulation is present (see photos). Ideal for laboratory, industrial, educational, testing, or development applications. Technical Data (excerpt) Dsdpfx Alsx T Av Ie Uskn Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / stainless steel Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and data are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Condition: used, tires, solid rubber tires, forklift tires -Manufacturer: Vorwerk Rota, solid rubber tires 3 pieces -Tire size: 18x7-8 rim 4.33 R-8 532/272-1 -Bolt circle: Ø 148 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 22 kg/piece Dkjdpfx Aljurn Tto Uon