Used Glue Specification for sale (13,361)

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Crjdpfxozk Nmre Aktoi Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: excellent (used), Year of construction: 2017, Ref:11156 . 2017 Schmedt Präleg XL Casing-in Pressing Machine For casing-in a variety of thin to thick books into flexible or hard cases. Special features: • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230 V + compressed air. Codpoz Hbuqefx Aktori

Year of construction: 2022, condition: used, KOLBUS Box Production Line BLT 200 + BLW 200 year 2022 For the automatic production of raw boxes from cardboard blanks as well as the lamination of the boxes. The BLT 200 is used for uprighting punched and grooved cardboards and the BLW 200 is used for laminating boxes. Overview: BLT 200 box line taper BLW 200 box line wrapper Crjdpfxsz E Npmj Aktsi Configuration: BLT 200 box line taper · copilot system with touch screen · cardboard feeder · uprighting channel · 4 heat-sealing tape stations · 2 sets of knives (4 pcs. each) · 2 sets of counter knives (4 pcs. each) · servo-controlled drive technology based on Siemens technology · delivery incl. inline coupling with box line wrapper BLW 200 Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 3 mm cardboard thickness min.: 1 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm BLW 200 box line wrapper · copilot system with touch screen · cloth feeder · hot gluing station with premelter · glue application adjustment from the outside · viscosity controls · buffer zone for feeding the boxes · cloth transport with vacuum conveyor · camera system for precise positioning of the boxes on the cloth · robot for positioning the boxes on the cloth · rub down station · 4 laminating stations for laminating boxes · 10 format plates (1.000 mm x 215 mm x 15 mm) · servo-controlled drive technology based on Siemens technology · infeed incl. inline coupling with box line taper BLT 200 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 20 mm cardboard thickness max.: 3,0 mm cardboard thickness min.: 1,5 mm cloth length max.: 815 mm cloth length min.: 120 mm cloth width max.: 605 mm cloth width min.: 120 mm

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Crjdpfx Ajzvb Uxjktji Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: used, Year of construction: 2007, operating hours: 10,000 h, machine/vehicle number: ET212, Used Labeling Machine PE LABELERS Universal Master up to 7500 bph The Machine delivers advanced technology for labeling glass bottles, meeting production demands of up to 7500 bottles per hour. Furthermore, P.E. Labellers manufactured this machine in 2007, ensuring precise operations with its robust design and integrated features. Technical specifications and performance of the Used PE Labellers Labeling Machine The labeller includes eight rotating plates and five labeling stations. Specifically, three stations apply adhesive labels, while two use cold glue. The machine rotates clockwise, which streamlines bottle flow management. Additionally, its manual adjustment system for both the head and labels enables quick adaptations to different formats, thereby enhancing flexibility. Production capacity and configuration The labeller handles glass bottles with a maximum diameter of 120 cm and a standard 0.75-liter format. Consequently, it operates at a top speed of 7500 bottles per hour, making it ideal for medium-scale production lines. Moreover, the system applies labels to the front, back, and neck of each bottle, ensuring a high-quality, professional finish. Labeling method and management in the Used PE Labellers Labeling Machine This machine applies labels using adhesive and cold glue methods. Therefore, this dual approach ensures compatibility with a wide range of label designs and materials. Meanwhile, operators manually adjust the system to maintain precise control during each production batch. Current state and operational specifications The machine remains in storage; however, it is ready for immediate deployment. It has recorded 10,000 working hours, yet it still offers substantial operational capacity. Furthermore, its robust build, weighing 2250 kg, ensures stability and durability even under high-speed conditions. Electrical data and power requirements Crsdpfx Aevgu Udjktoi The labeller PE LABELERS Universal Master up to 7500 bph runs on 400 V, with an installed power of 5 kW and a frequency of 50 Hz. As a result, its electrical configuration meets industrial standards, ensuring efficient energy usage for extended operations. Additionally, its energy efficiency supports long-term cost savings. Applications and technical advantages The Used Labeling Machine PE LABELERS Universal Master up to 7500 bph ensures efficient and accurate label placement. Similarly, its versatile labeling stations handle bottles of various shapes and sizes without compromising output quality. Consequently, this versatility makes it a reliable option for many bottling operations. Technicians and industry experts rely on this machine for its performance and customizable configurations. Above all, it represents an excellent choice for demanding bottling applications.

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters Crodpozk N U Ajfx Aktsi - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: TNC407, overall weight: 13,400 kg, spindle motor power: 18,500 W, spindle speed (max.): 1,300 rpm, table length: 1,100 mm, table load: 3,000 kg, table width: 1,000 mm, number of axes: 4, This 4-axis TOS WH 10 CNC boring machine was manufactured in 1996. It features a longitudinal travel of 1250 mm, transverse feed of 1000 mm, and vertical travel of 1100 mm. The machine has a robust table size of 1000 x 1100 mm and a maximum table load capacity of 3000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details. • Spindle diameter: 100 mm Csdpfx Ae Adtm Hskteri • Table size: 1000 x 1100 mm • Machine was rebuilt in 2018, the scope:- parts intended for grinding: machine bed, foundation slide, transverse slide, column, pallet,- inspection of gears, shafts, replacement of faulty and worn parts,- replacement of all bearings,- New Spindle- replacement of tubular shaft bushings,- Replacement of the bearing of the bearing ball screw- Belt replacement.- repair of the rope line that holds the counterweights,- replacement of the strap,- checking the hydraulic system,- Eliminate oil leaks- checking the oil system, cleaning, replacing faulty elements,- Grooving and processing of sliding surfaces with Diamant Moglice glue (base slide, spindle housingcross table), processing of oil grooves.- New production of conical lamellas,- interior painting,- repairs of covers, Henning protectors,- replacement of wire wipers,- repair of the cooling water system,- replacement of levers, buttons, scales, inscriptions,- grinding and adjusting the slats of mechanical fasteners,- the entire paintwork of the machine is RAL 601 Technical Specification Taper Size ISO 50 Through-spindle Coolant No

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Codpfezzki Nex Aktjri Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Crodj Af E Iljpfx Aktsi Technical specifications: Type: Semi-automatic machine for producing hardcovers Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: used, Year of construction: 2014, machine/vehicle number: ET232, Used AXTRA labeller machine - 8.000 BPHTechnical Specifications & Performance DataThis modular automatic labeling machine is configured for glass bottles and can be adapted for PET or other container materials. Designed for beverage production and industrial packaging applications, it is ideal for integration into a used bottling line or as a second hand labeling solution within a complete production line. The machine features a carousel construction with variable speed control for flexible operation across multiple formats.Production speed: 5,000–8,000 bottles per hour (current setup at 5,000 bph, up to 8,000 bph)Carousel: pitch circle diameter 720 mm, 9 plates, clockwise rotationStations: up to 4 labeling stations can be mountedContainer shapes: cylindrical and shaped containers (subject to dimensional verification)Container diameter range: 45–115 mmContainer height range: 180–330 mmLabeling technologies available: cold glue; self-adhesive (adhesive)Self-adhesive non-stop carriages: 3 units, 400 mm reels; max label height 2 x 195 mm and 1 x 95 mmSelf-adhesive standard carriages: 3 units, 300 mm reels; max label height 95 mmCold glue stations: 2 units, fully overhauledAdvanced Automation & Control SystemsThe drive and control architecture supports precise, reliable operation for high-quality labeling on a variety of containers. The main carousel is driven by an asynchronous motor with inverter for smooth variable speed, while label application modules use stepper motors for accurate feed control.Main drive: asynchronous motor with inverter (variable speed)Label feed: electromechanical with stepper motorsVertical adjustment: electric vertical adjustment of the upper carouselOptical centering readiness: prepared for optical fiber and/or mark reader centeringNon-stop capability: self-adhesive carriages with pre-unwinder and rewinderProduction Line Integration CapabilitiesEngineered for seamless inclusion in a bottling equipment lineup, this machine can operate inline or as a standalone unit. Its modular frame accommodates different labeling methods and placements, enabling rapid adaptation to diverse production requirements common in beverage production and industrial packaging.Compatible with upstream/downstream conveyors and inspection systemsQuick exchange between cold glue and self-adhesive modulesMulti-format flexibility for cylindrical and shaped bottlesDesigned for PET and Glass bottle handlingSuitable for integration into complete packaging machinery and production linesMachine Condition & Maintenance HistoryThe core machine was used for internal testing and is essentially like new. Labeling stations have been overhauled to ensure reliability and performance.Core machine use: internal test machine; essentially... Crsdpfx Ao Ady D Soktsi

Condition: used, Year of construction: 2001, Saddle stitcher Müller Martini Prima Amrys Year: 2001 (2018) Modernized in 2018 with a new B&R control system. Operation / Control - Digital display - Semi automatic setting Feeders - Number of chain stations: 12 - Horizontal signature feeders: 9x 370 (7x 2001, 2x 2006 - ASIR Automatic Signature Image Recognition: Asir III - Card gluer: 0423.0420 - Hotmelt glue unit: Robatech Concept B 5/2 - Cover feeder: 1529 (2002) - The feeder stations are without AMRYS. - Semco side thickness control: 0333.0426 - Pump(s): Air-centre Stitching unit Müller Martini Prima Amrys (0390) Crodpfx Akszhucystsi - Oblique sheet control - Stitching control - AMRYS automatic make ready system - Stitching heads: 4x HK 75 - Delivery to the left - Reject gate, for incomplete products Trimmer Müller Martini 0361.0435 - AMRYS automatic make ready system - Sets of knives: 2 - Center cutting device Delivery Müller Martini Pratico 7524 Year: 1999 - Compensating stacker - Delivery to the left - The stacker is not equipped with AMRYS. Max. mechanical speed: up to 13.000 cycles/h Maximum size (uncutted): max.: 480 x 320 mm Maximum size (cutted): max.: 475 x 300 mm Minimum size (uncutted): min.: 153 x 108 mm Minimum size (cutted): min.: 148 x 105 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2024, condition: used, KOLBUS Box Production Line BLP 500 + BLF 500 year 2024 The corner punch BLP 500 is used for punching cross grooved boards and the box line former BLF 500 is used for production of rigid boxes from cross grooved and corner punched boards. Overview: BLP 500 box line puncher BLF 500 box line former Configuration: BLP 500 box line puncher · copilot system with touch screen · 1 set (4 pieces) of knife holders · 5 sets (40 pieces) of knives · 3 sets (12 pieces) of cutting sticks · waste delivery out of the machine via transport conveyor · servo-controlled drive technology based on Siemens technology · infeed with cardboard feeder CF 500 · delivery incl. inline coupling with box line former BLF 500 Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm Credpfx Asz E Riujktoi cardboard width: min.: 140 mm cardboard thickness max.: 4 mm cardboard thickness min.: 1,5 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 15 mm BLF 500 box line former · copilot system with touch screen · cold glue device with 1 set (4 pieces) 0,3 mm gluing nozzles for gluing grooves · box forming device to turn-up of the side panels · holding station for glue drying · servo-controlled drive technology based on Siemens technology · infeed incl. inline coupling with box line puncher BLP 500 · delivery via conveyor belt Technical specifications: mechanical speed: up to 40 cycles/min cardboard height max.: 525 mm cardboard height min.: 140 mm cardboard width max.: 735 mm cardboard width: min.: 140 mm cardboard thickness max.: 4 mm cardboard thickness min.: 1,5 mm box length max.: 570 mm box length min.: 56 mm box width max.: 360 mm box width min.: 56 mm box height max.: 170 mm box height min.: 15 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 55, working width: 600 mm, compressed air connection: 6 bar, type of input current: AC, total width: 2,250 mm, total length: 7,220 mm, total height: 1,840 mm, stack height: 500 mm, overall weight: 3,000 kg, Equipment: CE marking, PERONDI C800 laminating machine and PERONDI R4L 600 in good condition, available for sale. The sale also includes the following equipment, providing a complete and versatile production setup: Credez Hm Ntspfx Aktoi Hot-melt glue system Feeder Vacuum belt Pressing rollers All included equipment has been part of the production setup and is offered together with the machines. The equipment has been well maintained and carefully operated and is in good condition. Machine highlights: Manufacturer: PERONDI Good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment This is an attractive opportunity to acquire a well-maintained PERONDI C800 and PERONDI R4L 600 laminator with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: used, Year of construction: 2002, machine/vehicle number: LC698, Used AVE monoblock 1-75-24 filling line 30000 BPH - Year 2002Technical Specifications & Performance DataThis used bottling line is designed for high-speed handling, filling, capping, inspection and secondary packaging of PET and glass bottles. The declared maximum line speed is 500 bpm, while individual equipment is rated up to 900 bpm in bottle handling sections and 800 bpm through the filling, capping and inspection stages.Declared maximum line speed: 500 bpmContainer handling: PET and glass bottlesFormats: Mignon 50ml Filling monoblock: AVE Monoblock 1/75/24 with 75 valves, rated at 800 bpmPrimary capping equipment includes Zalkin and Fowler cappersSecondary packaging includes shrink wrapping, bundle labeling, case forming, glue application, checkweighing and case turningMachine years represented in the line range from 1984 to 2020Advanced Automation & Control SystemsThe line combines dedicated bottle handling, cap handling, filling, closure inspection and reject systems to support controlled beverage production. Inspection equipment includes a Heuft Basic BA-R20 unit for bottle-cap and low/high fill-level inspection, followed by a Heuft pusher rejection unit.Available electrical data includes a Lanfranchi bottle unscrambler rated at 400 V, 60 Hz and 4 kW. The Tekkra shrink wrapper is rated at 480 V, 60 Hz, 102 A and 3-phase power. The Pearson case former is rated at 460 V, 60 Hz, 3-phase power, 3 KVA and 15 A. The Thermo Scientific Versa checkweigher operates on 120 VAC, 50/60 Hz, single-phase power.Production Line Integration CapabilitiesThe complete bottling line is arranged for bottle preparation, filling, capping, inspection and downstream industrial packaging. Bottle unscrambling, dumping and merging equipment supports PET and glass bottle flow, while cap elevators, cap conveyors and cap sorters provide closure handling upstream of the capping stations.Machine typeManufacturer / modelYearVarious EquipmentDumpers Unlimited Bottle Unloader2017Various EquipmentLanfranchi .24.58 Bottle Unscrambler2003Various EquipmentHartness Bottle Dumper2004Various EquipmentLanfranchi Merger2018Various EquipmentPerrier MFL. 60 / MFG 60 Cleaner1984Filling MonoblockAVE Monoblock 1/75/24 Cods Ad Rixopfx Aktori

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Csdpozk N Euefx Aktsri Printing unit Trimming unit Multifunctional milling unit Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: used, machine/vehicle number: LC557, Used Bottling Lines for edible oil 6000 bph General Configuration of the Bottling Line The Used Bottling Lines for edible oil 6000 bph line processes edible oil in 1-liter PET bottles, operating at a nominal speed of 6000 bottles per hour. The configuration includes equipment from multiple manufacturers, integrated to ensure continuous operation and reliability in filling, labeling, packaging, and palletizing. Operators correctly shut down the entire system in December 2022. At present, the machines are dismantled and stored in suitable conditions. Consequently, this line is immediately available for relocation and reuse. Overall, the structure represents a compact yet complete solution for medium-scale production. Container Formation: KOSME Blow Molding Machines The Used Bottling Lines for edible oil 6000 bph line includes two blow molding machines from KOSME, model KSB3000, year 2001. Each unit works with a preform box and an automatic transport system that feeds the blower. As a result, the system supports on-site bottle production. Therefore, it reduces logistics costs and improves plastic material handling. In addition, the dual-machine setup enhances production continuity and minimizes downtime. Cooling System: MTA Chiller and Air Conveyors An MTA chiller, model TAE 051, year 2000, cools the molds in the blow molding machines. Moreover, KOSME air conveyors, model L2000, year 1999, made of AISI 304 stainless steel, transfer the blown bottles to the filling monoblock. Notably, the system includes electrical cabinets with integrated PLCs and built-in air filters. Thus, it ensures effective airflow control and maintains consistent air quality. From a technical standpoint, this contributes to long-term reliability and hygienic conditions. Filling Monoblock: ICS RVP-12/ZS-3N The ICS filling monoblock, model RVP-12/ZS-3N, year 1995, serves as the core of the Used Bottling Lines for edible oil 6000 bph. This machine doses edible oil with precision, ensuring product integrity and consistent fill volumes. Furthermore, the system synchronizes with upstream and downstream units. Consequently, it enables stable operation even under variable load conditions. Likewise, its mechanical construction supports easy maintenance and spare part replacement. Labeling Machine: ICS with Cold Glue An ICS labeling machine, model ERG-6/2/2, year 1995, applies paper labels using cold glue. Specifically, the machine ensures proper adhesion on PET containers. Additionally, it supports the 1-liter format used throughout the line. In practice, this technology remains widely adopted for edible oil packaging. Therefore, the labeling unit integrates efficiently into the overall production layout. To sum up, it provides a cost-effective solution without compromising performance. Internal Handling and Packaging Csdpfx Akowlt Dgsteri ICS conveyor belts, installed in 1995, connect all key stations. Subsequently, the line transitions to the packaging phase. It includes an ICS case packer, model Vlaga 2IC, which arranges bottles in transport boxes with a 3×5 layout. At the same time, a shrink wrapper from SMIPACK, model BP802ARV 280R-SP, year 2013, wraps bottles in film with a 2×5 configuration. Accordingly, the dual packaging options provide flexibility based on market or client needs. Overall, these systems enhance the final presentation and transport efficiency. Palletizi...

Condition: used, Year of construction: 2013, Used Wrap Around SGE year 2013 – 3000 boxes/hour General Technical Description The Used Wrap Around SGE year 2013 – 3000 boxes/hour delivers high-efficiency carton packaging for PET and glass containers. S.G.E. manufactured this machine in 2013, and since then, it has served as a reliable solution for secondary packaging in bottling lines. Not only does the structure support demanding industrial use, but it also ensures consistent and repeatable operation. Furthermore, the machine integrates seamlessly into most bottling layouts. Importantly, the Used Wrap Around SGE year 2013 – 3000 boxes/hour reaches this output capacity thanks to the integration of a divider insertion system, which places cardboard dividers (commonly known as alveare) between bottles. This feature stabilizes the packs during carton folding and gluing operations, and ensures safe handling, especially in multi-row configurations. The machine is configured to work with bottles of 0.75 L and supports multiple carton formats, including 3×2, 3×4, and 3×6. This format versatility enhances its adaptability across a wide range of packaging needs. Configuration and Performance of this Used Wrap Around SGE The Used Wrap Around SGE year 2013 processes up to 3000 cartons per hour, both in the 3×2 and 3×4 formats. Consequently, the 3×2 configuration yields 18,000 bottles per hour, while the 3×4 configuration handles 36,000 bottles per hour. The 3×6 configuration further extends the machine’s capacity, allowing even higher bottle output depending on the production layout. The machine uses a straight-line infeed system that guides bottles into the carton blank positioning area. Once the bottles are in place, the system folds a flat carton blank around them and seals it using hot-melt glue. The entire process—forming, folding, and gluing—is mechanically synchronized to ensure high packaging precision. Moreover, the modular design allows for fast format changes and simplified maintenance. Above all, the machine maintains stable output even during peak production. Electrical and Mechanical Specifications The machine operates on 400 Volts, 50 Hertz, and draws a maximum of 42 kW. This power supports key functions such as motorized feeding, carton forming, and gluing. Additionally, S.G.E. designed the wrap around with rugged components, which resist wear and ensure long-term reliability. In fact, engineers can easily access all mechanical areas, simplifying maintenance and diagnostics. For this reason, the machine suits production environments that require both uptime and durability. Safety and Operational Condition Crodpfjwbgzdsx Aktei S.G.E. equipped this Used Wrap Around with a complete set of safety devices. Therefore, the machine complies fully with European safety regulations for operator protection. At present, it remains in storage; however, all its main systems are preserved under controlled environmental conditions.

Year of construction: 2010, condition: used, Muller Martini EVA-Hotmelt Side Gluing Unit Year: approx. 2010 Credpfxs Ahidno Aktji Configuration: - With side glue wheels - Technical specifications: Compatible with: Muller Martini 1577 Pantera perfect binder Suitable for: EVA hotmelt glue

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener Csdpfx Aeru Evgskteri - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: excellent (used), Year of construction: 2004, Ref:11162 . 2004 Kolbus Publica KM410.C High speed perfect binding line. Comprising: 15 x stream feeders with extended infeed for log loading 30 x ZU841C gatherer with interchangeable top-loading feeders for folded sections and single sheets Hand feed station Automatic thickness control AS 800 reject station for over or incomplete books with length & width monitoring Raceway/transfer with vibrate unit Publica binder type KM410.C with 24 clamps with ‘Co-Pilot’ Milling/brushing, equalizing milling, ‘Micro’ notching & brushing units LH370 EVA pre-melt units 2-shot EVA hot-melt spine glue tank EVA hot-melt side glue unit I.R. heating in radius for increased glue open time SAL410A Stream cover feeder with four-line scoring Cover nipping/pressing station Delivery system with lay-down device and reject station Conveyor system including cooling tower to; Kolbus HD152.P pile trimmer with ‘Co-Pilot’; Csdpfez I Tz Ssx Aktsri Rima RS-3310S compensating book stacker to; Specification: Book size, Max: 420 x 290 x 65 mm Max: 420 x 305 x 20 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 15,000 cycles/hr

Condition: used, Year of construction: 2019, Muller Martini Premelter LH 375.B Year: 2019 For melting EVA hotmelt glue. Configuration: Crsdpfx Akj Ahgfketoi - With heated hose, length: 9 m Technical specifications: Glue type: EVA hotmelt adhesive Reservoir capacity: 90 liters

Year of construction: 2019, condition: used, KOLBUS EVA-HOTMELT SPINE GLUING UNIT Year: 2019 Configuration: - With rollers - With level control - Technical specifications: Compatible with: KOLBUS KM 600 perfect binder Suitable for: EVA hotmelt glue Credpfx As Ahgfcektei

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Cedpfx Ajy Szb Hsktsri

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg 230V power supply Crodpjz Rk Hrsfx Aktji Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Crjdoz Rk N Tspfx Aktoi Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.