Used Gmx 250 for sale (9,738)

Condition: used, Bystronic Beyeler Xpert 250 Brake Press with Bystonic CNC Control, 5100mm Bed, Hydraulic Tool Clamping, Max Force 2500kw, Max Stroke 265mm, Auto Back Stroke 265mm, Auto Backstop 3 Axis, Fiessler Electronik Sensor System. S/No. 8710001 (2008), Machine Weight 26,000kg. Country of Origin: Germany Lrsdpfx Abjyidx Ej Toh Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm Lrjdpfx Abjyg Iprj Tsh - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: new, *AVAILABLE IMMEDIATELY* Including hand pump / all-steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper trailer • Condition: New vehicle • Initial registration: Not yet registered • TÜV inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: High-loader (wheels located under the body) • Tyres: 165/70R13 • Axle: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodised aluminium side panels • All side panels can be folded down and removed • Removable steel corner posts • Insert sockets at all four corners for fitting tarpaulin frames, mesh sides, side wall extensions, or headboard extension • Plastic tie-down buttons mounted to the side panels for fastening nets or flat tarpaulins • Sturdy eccentric locks • 44° tipping angle • 100 km/h manufacturer approval • Robust full steel floor • Reinforced V-drawbar • Strong welded steel frame • Frame fully hot-dip galvanised by immersion bath • Multiple cross-beams for increased point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing rings set into the side rails (600 DaN/kg) • Unbraked rubber-sprung KNOTT axle • 13-pin plug • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Rear frame lighting recessed for protection • Central jockey wheel Optional extras – On request: • Mesh sides • Side wall extensions • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance or export plates (Germany) can be provided - Export plates including customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Lrodpex Tbk Dofx Ab Teh 46419 Isselburg Over 1,200 trailers available from stock! We have been authorised dealers and service partners for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions and prior sale -

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW Financing through our bank is also possible. komplett-konzept.leasingo.de Lrsdpod Srlrjfx Ab Tsh More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20/2 160 0-250 kPa -Number: 14x pressure gauges available Lrsdpfx Aoyd H H Rjb Toh -Price: per piece -Cardboard dimensions: 200/185/H70 mm -Weight: 0.9 kg/pc.

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Table diameter 250 mm Ledpeyddivofx Ab Torh Spindle bore Ø 70 mm Weight 260 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm Lredpju Ng Npofx Ab Tjh *

Condition: used, Year of construction: 1982, Technical details: cutting diameter: 120 mm dimensions of saw-blade: 425 x 30 mm cutting range 90 degrees: round: 120 mm height over floor: 800 mm electrical connection: 380 V / Hz. strokes per minute: 60 / 92 / 140 Hübe/min. total power requirement: 1,5 kW Overall size: ca. L:1,2 x B: 0,75 x H: 1,10 (Bügel angehoben) m Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the saw blade remains in the lowest position. Lredpfeu Nilasx Ab Tsh Workpiece holder via fixed jaw and clamping jaw, with hand crank Coolant device in the base limit stop *

Year of construction: 2016, condition: used, Technical details: wheel base: 950 mm lifting capacity: 25000 kg Lifting height: 1310 mm Tare weight: 2100 kg dimensions LxWxH: 1,7 x 2,0 x 0,75 m total power requirement: 11,2 kW WHEELSET CHANGING SYSTEM - WHEELSET SWIVEL Application: Changing wheelsets and driving sets for railroad applications (locomotives, freight wagons, etc.) 2 speed levels forward/backward 2 speed levels lifting approx. 60 sec./lowering approx. 110 sec., operation via manual control unit shift left/right +/-20 mm Lift category 5 EMERGENCY OFF Platform: L: 1420 x W: 657 mm, effective stroke 1050 mmOperating pressure for hydraulics = 185 bar Speed of chassis = 2 stages min. 18 mm/sec. Center distance: 950 mm Equipment: Lrjdex Ac R Uspfx Ab Toh 10 m connection cable with 380 V *

Condition: used, Year of construction: 1978, Technical details: lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Column i.D. Lrsdsu Szhpopfx Ab Teh *

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, We are offering this used Berg & Schmid GBS 250 VA-I bandsaw, year of manufacture 2017. Manufacturer: Berg & Schmid Model: GBS 250 VA-I Year of manufacture: 2017 Condition: used Category ID: 1634 Type ID: 1756 Lsdpfoylgwxex Ab Torh Machine type: Bandsaw Cantilever racking is included in the price Dismantling and transport must be organized by the buyer Assistance with dismantling and loading can be provided upon arrangement If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 2014, Mazak Quick Turn Smart 250 CNC Turning Centre with Mazatrol Smart CNC Control, Kitagawa BB 210 Powered 3 Jaw Chuck, 12 Position Tool Turret, Tailstock, Max Spindle Speed 4000rpm, Filtermist FX 4002 Oil Mist Extractor. Machine Weight 4610kg. S/No. 240540 (2014) Includes Various Tool Holders, Sleeves and Centre in Turret and Boxes. Country of Origin: United Kingdom Lodpfx Ajyhd Exeb Tjrh Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, mileage: 1,001 km, first registration: 01/2008, empty load weight: 310 kg, color: red, driver cabin: other, gearing type: other, Year of construction: 2008, load capacity: 3,000 kg, Equipment: crane, Vehicle location: Bovenden, complete with Kinshofer rotary head and upper suspension! Bucket width approx. 500mm, capacity approx. 250l! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Lrjdpoyk H Rpofx Ab Tsh

Condition: refurbished (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 1146, total height: 2,752 mm, total width: 3,000 mm, total length: 1,152 mm, pressing force: 250 t, table width: 2,400 mm, table length: 800 mm, overall weight: 9,820 kg, distance between stands: 2,050 mm, stroke length: 700 mm, Hydraulic press GALFER DST/E 250, 250-ton double-column model, ideal for metal stamping and forming processes (deep drawing, bending, blanking, straightening, and general industrial pressing operations). A robust and reliable machine, equipped with a 2400 x 800 mm table and 700 mm stroke, with a 2050 mm gap between uprights to accommodate large dies and tooling. Features a 15 kW motor. Lrsdpfx Aoylz Dmeb Toh The press is undergoing retrofit (upgrade/refurbishment), with the possibility of ready-to-use delivery based on the agreed configuration. The last photo is a render showing a possible complete revamping of the machine. Available on request: additional photos/videos, details on the retrofit status, technical documentation, and inspection opportunities.

Condition: used, mileage: 51,666 km, power: 118 kW (160.44 HP), fuel type: hybrid, gearing type: automatic, first registration: 12/2021, color: grey, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Current mileage: 51,666 km, of which 30,541 km purely electric Warranty package valid until 03.12.2026 (can be extended upon request) VAT deductible Digital services extended until 03.12.2026 (can also be further extended) Special equipment: * Ambient lighting, * Business Package, * Exterior mirrors with Blind Spot Assist, Lsdpfxsxax Taj Ab Terh * Adaptive High Beam Assist, * Infotainment System: Remote & Charging Services Plus, * Connectivity Package, * Charging cable for public charging stations, * Load compartment package, * Electrically adjustable lumbar supports in front seats, * Metallic paintwork, * Front center console with roller shutter/storage compartment, * Multifunctional telephony, * Night Package, * Parking package with 360° camera, * Heated windscreen washer system, * Electrically adjustable driver's seat (with memory function), * Mirror package Additional equipment: * Passenger airbag deactivation, * Driver and passenger airbags, * Acoustic environment protection (external sound), * Electrically adjustable and heated exterior mirrors, both sides, * Exterior mirrors in vehicle color, * Front pelvic airbags (pelvis bag), * Integrated sunglasses compartment in headliner, * DAB tuner (digital radio reception), * AMG Line design and equipment line, * 75 kW electric motor (hybrid drive), * AGILITY SELECT / DYNAMIC SELECT (drive mode selection), * Active brake assist, * Active lane keeping assist, * Speed limit assist, * Live Traffic Information system, * Traffic sign recognition, * Vehicle setup (online services/apps), * Vehicle monitoring (vehicle tracking system), * Electric windows front and rear, * 8-speed dual-clutch transmission DCT, * Hybrid 160 kW (engine 1.3 liter – 118 kW), * 5-door bodywork, * Keyless-Go start function, * Automatic climate control (THERMATIC), * Driver's knee airbag, * Comfort suspension (Agility Control), * Communications module (LTE) prepared for Mercedes me connect, * Window airbag system, * Charging cable with household plug (Schuko), * Leather (sport) multifunction steering wheel, * Light and Sight package, * Mercedes-Benz emergency call system, * MBUX multimedia system (digital multimedia system), * and much more. * Errors and prior sale excepted

Condition: good (used), functionality: fully functional, planing width: 250 mm, total width: 540 mm, total height: 540 mm, total length: 1,100 mm, Planer, planer 250 mm Specification: • condition - used • max working width - 250 mm • length of tops - 1100 mm • manual setting of tops • 3-knife shaft for traditional knives • start-up 0-1 Lsdpfxowbpu Tj Ab Tjrh • culaga dimensions 40 x 6 cm • overall dimensions 110 x 54 x 50 cm (length x width x height) Additional information: • very good technical and visual condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Year of construction: 2018, operating hours: 2,444 h, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 2,350 mm, fork width: 550 mm, total height: 1,300 mm, color: other, GVW: 1.170 kg Lodpoyki U Djfx Ab Torh Lifting capacity: 2.500 kg FUNCTIONS LIKE NEW! NEW BATTERY CELLS 24V 6PzBH 600Ah with central water filling system, 220V high-frequency charger, Fork size 2350 x 550 mm, Load support! Tandem fork wheels, Reconditioned lifting and steering system, Foldable standing platform,

Condition: used, Electro round magnet, crane magnet, load magnet, lifting magnet STEINERT type LR 250-N-2 Lodpfx Abexf Uygo Terh Serial no.: 421850 Load capacity: 1000 kg Magnet diameter: 250 mm Power consumption: 0.662 amperes Mains connection: 200 volts DC = direct current - An external power supply is required (not included) - For crane operation - Load test performed on crane – material-magnet detachment between 2200 - 2250 kg Net weight: 32 kg

Condition: excellent (used), Year of construction: 2024, Field of application: Construction Empty weight: 230 kg CE mark: yes Technical condition: very good Visual appearance: very good Please contact Nedtrax B.V. for more information Lsdpfxjyc Digs Ab Terh Mustang GRP250 CH Excavator Grapple year 2024 to fit 3,5 - 9.5 ton excavators, CE marked

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, loading space length: 2,530 mm, loading space width: 1,640 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ Tipper 250/2 C S 2T NEW VEHICLE Internal dimensions: 253cm x 152cm Sidewall height: 30cm Platform height: 80cm Gross weight: 2000kg Payload: 1532kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x axles with 1350kg brakes Low chassis Fully welded hot-dip galvanized steel frame Aluminium profile side panels with tension latches Fold-down and removable on all sides Galvanized steel floor Support wheel 6 lashing eyes Reinforced 13" C-rated tyres with steel valve M+S tyres Mesh/rope hooks on the frame 13-pin plug Front marker lights Rear lamps with reversing, fog lights and triangular reflectors Lrjdpfx Aow A I Etob Tsh Top frame mounted on rubber bushings Hand pump with stowable handle Safety lock for top frame OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Loading ramps - Folding crank rear supports - Full LED lighting - Anti-theft device - Mesh netting (fine or coarse) - H-frame - Leaf mesh sides in various heights, also closed - Extension side panels in steel or aluminium 30cm with tension latch - Flat cover, with or without hoops - High cover, 140cm Additional accessories available on request! Plus shipping to Gera and vehicle registration certificate: €200 net Pictures are for illustrative purposes and may show accessories subject to surcharge. Haven't found the right trailer yet? We have 50–100 vehicles in stock and available for immediate pickup at all times. Our workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. In addition, we have a large range of spare parts and accessories, also for trailers from different manufacturers. Visit us online or come by in person!

Condition: new, functionality: fully functional, empty load weight: 289 kg, maximum load weight: 1,011 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, Year of construction: 2026, MARTZ High Loader 250 1.3T NEW VEHICLE Internal dimensions: 254cm x 151cm Gross weight: 1,300 kg Payload: 1,011 kg Braked single-axle high loader 1,300 kg KNOTT axle with overrun brake, automatic reverse mechanism, and handbrake Bolted and galvanized steel frame Galvanized steel side walls, 40cm high 15mm thick, durable, and anti-slip phenolic plywood floor 13-pin electrical system Jockey wheel 13-inch M+S tires Multiple lashing points Front marker lights Rear lights with reversing light, fog light, and triangle reflectors 2x wheel chocks Optional accessories: - 100 km/h upgrade - Rear supports Ljdpfx Absww A Hbs Tjrh - Exchange steel side walls for aluminum ones - Additional side walls in steel or aluminum - Integrated loading ramps in steel or aluminum - Mesh extension - Ladder rack - Motorcycle stand rail - Flat tarpaulin with or without hoops - High tarpaulin - Coarse or fine-mesh net - Spare wheel with bracket Further accessories on request! Images are for illustration purposes and may show optional accessories subject to extra charge. Plus registration document and shipping to Gera: €129 net. Haven’t found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate pickup. Our workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Axle repair specialist, also for caravans. Ijbquowvi Ehopd Nfean Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get expert advice by phone, visit our website, or stop by directly.

Condition: new, functionality: fully functional, empty load weight: 364 kg, maximum load weight: 1,636 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, MARTZ High Loader 250/2 C 2T NEW VEHICLE Internal dimensions: 254cm x 151cm Side wall height: 40cm Loading height: 71cm Gross weight: 2000kg Payload: 1636kg Braked tandem high loader Overrun brake and handbrake from KNOTT 2x 1000kg axle and brake with automatic reversing mechanism Bolted and hot-dip galvanized steel frame Galvanized steel side walls with safety lock Folding and removable on all sides 15mm thick, non-slip and heavy-duty phenolic plywood floor Jockey wheel 6x lashing eyes Lrsdpfx Absww A Dte Toh 13" tyres M+S tires Net/rope hooks on frame 13-pin connector Front position lights Rear lights with reversing light, fog light, and triangular reflectors 2x wheel chocks OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - Equipment for 100km/h (shock absorbers) - Spare wheel with holder - Integrated ramps (aluminum or steel) - Rear support with folding crank - Anti-theft device - Net (fine or coarse mesh) - H-frame - Exchange steel side walls for aluminum side walls - Mesh sides in various heights, also enclosed - Extension side walls (aluminum or steel) - Flat tarpaulin with or without bows - High tarpaulin 140cm - Automatic jockey wheel Further accessories available on request! Plus freight to Gera and vehicle documents €129 net Images are for illustration only and may show optional accessories subject to surcharge. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and ready to collect immediately. Our workshop is open weekdays from 8:00 – 17:00 for all types of repairs. Specialist in axle repairs, including for caravans. Large selection of rental trailers available. In addition, we offer a wide range of spare parts and accessories for trailers of all manufacturers.

Condition: used, Year of construction: 2016, empty load weight: 217 kg, total length: 621 mm, construction height: 625 mm, construction width: 209 mm, Drive battery Battery voltage: 24V Battery Ah: 250Ah Battery manufacturer: Midac Battery type: PzS Battery year: 2016 Battery condition: 60 - 80% Description: Capacity 65%. If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Please feel free to browse our website fleischmann-foerdertechnik. We will gladly arrange leasing & financing as well as delivery at attractive rates upon request. We also accept trade-ins of Linde equipment, even if you do not purchase a unit from us. The listed operating hours were recorded as of the listing date. Subject to prior sale, modifications, and errors. Lrsdpjykvvzsfx Ab Tsh

Condition: used, turret of a Boehringer lathe Ledpfon Sulmex Ab Terh

Condition: good (used), Year of construction: 2005, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 250 mm, conveyor belt speed: 100 mm/s, total length: 2,000 mm, total width: 330 mm, total height: 90 mm, motor manufacturer: Procon, Item no.: 1000003719 Used conveyor belt driven - 2,000 mm Technical Data: Manufacturer: AXMANN Year of construction: 2005 Overall dimensions: approx. 2,000 x 330 x 90 mm (LxWxH) Width incl. cheek: 255 mm Side panel height: 35 mm Width incl. drive: 330 mm Conveyor length: 2,000 mm Conveyor width: 250 mm Belt type: PVC, smooth Belt width: 250 mm Substructure: without Drive: Head drive Motor: Drum motor Motor data: Procon, 50 Hz, star 380-440 Volt, delta 200-240 Volt Conveying speed: max. 0.10 m/s, constant Lsdpfx Abshp Dyxs Tsrh Special features: Condition: Used / fully functional Function test: OK