Used Gmx 250 for sale (17,844)

Condition: good (used), We offer you here a used shelf connector of the manufacturer SSI Schäfer for sale. Technical data of the shelf connector: Manufacturer: SSI Schäfer Included in the scope of delivery: 01x shelf connector used material colour: blue Shelf spacing: approx. 250 mm L-profile: approx. 40 x 40 mm Weight/pc: approx. 0.536 kg/pc. Chedpsd Ttz Rofx Aaqod 02x hexagon head screws, M8 x 20 8.8. 02x hexagon nut, M8 02x washers, M8

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Csdpfx Aaovzqyfoqohd Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 3,180 kg, fuel type: diesel, tank capacity: 470 l, color: beige, power: 322.15 kW (438.00 HP), output current: 397 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 220 kW (299.12 HP), nominal power (apparent): 275 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 4,463 mm, total width: 1,308 mm, total height: 2,170 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Doosan, type of cooling: water, AVS-Dieselstromaggregat DW 250 PE2 15 AK14A PRP-Leistung: 200 kW / 250 kVA ESP-Leistung: 220 kW / 275 kVA Motor: Perkins 1206A-E70TTAG3 Abgasstufe: 2 Drehzahl: 1.500 U/min Drehzahlregler: ECM Betriebsspannung: 12 V Kühlung: wassergekühlt Generator: Stamford UCDI274K Spannung: 400/231 V Spannungsregler: SX460 Steuertafel: DSE 7320 - Notstromautomatik Batterieladegerät 5 Ampere Typ: Haubenaggregat; wettergeschützt, schallgedämmt •Not-Aus-Schalter •Kühler mit mechanischem Ventilator •Grundrahmenkonstruktion mit integriertem Kraftstofftank (470L) und Schwingungsdämpfern •Kühlwasservorwärmung •Spannungs- und Frequenzregelung nach ISO 8528-5 Csdpfx Aasxlzq Soqehd •Aggregat nur für den stationären Einsatz verwendbar Die Aggregate werden als B-Ware verkauft. B-Ware bedeutet, dass die Aggregate optische Mängel wie Flugrost, Rost am Gehäuse aufweisen können. Diese Mängel beeinträchtigen jedoch in keiner Weise die Funktionalität und Leistungsfähigkeit der Aggregate. Mit der Annahme dieses Angebots erkennen Sie die beschriebenen Eigenschaften der Aggregate und den damit verbundenen Zustand ausdrücklich an.

Condition: excellent (used), For sale: a robust hydraulic press from the renowned manufacturer Vogel & Co Pressenfabrik Berlin-Borsigwalde. Model: 40×250 Machine number: 1715 Maximum pressure: 40 tons Chsdpew Rc Hmefx Aaqjd Oil capacity: 150 liters The machine is in good technical condition, complete, and comes with a control panel. Sturdy, stable construction – ideal for industrial applications in pressing, forming, or assembly. Electric power supply, hydraulic drive. Mounted on a pallet for easy loading. Condition: used, fully operational, with normal signs of wear.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Csdpfx Aew Uf Tksaqshd Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm Chedsdf S Eyjpfx Aaqed (freely selectable in turn) Stand depth: 300 to 700 mm (freely selectable in turn) More treble & bass can be customized on request. Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge) Free shipping on request!

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Csdsu Dxb Topfx Aaqshd Optionally with disc winder and straightener.

Condition: ready for operation (used), Technical characteristics Power and Motors Power: 1.5 Kw Overall dimensions Lenght: 560 mm Codpfx Aetv Tkyjaqohd Width: 730 mm Height: 410 mm

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates Codpfx Ashktq Asaqshd - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Chjdpjvzkylsfx Aaqsd Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws Chsdpfx Aev Uqwdjaqed - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 70 mm for shelf distance: approx. 250 mm dim. head plates: 130 x 60 mm Cjdsi Hpkxjpfx Aaqehd profile dim.: U 62 x 45 mm Weight: approx. 1,660 kg | pcs. General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cedjvdptvopfx Aaqjhd FABO manufactures and installs stationary type stone screening & washing plants according to customer requirements. Production capacity of our stationary plants differs from 100 to 1000 ton per hour. 150-250 Tons/hour capacity of Washing and Screening Plant: - Riverstone Feeding Bunker - 2000x6000x4 Decks Vibrating Screen with washing system - 800x8000mm Screw Washer - Conveyor Belt System - Control Panel and Automation System FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), The scope of delivery includes: 01x shelf connector, used for shelf distance: approx. 250 mm total length: approx. 330 mm cross section: U 30 x 52 mm Chsdpei Dfizjfx Aaqod Material color: blue weight: 0,46 kg | pcs.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. Cjdpowbp Ersfx Aaqehd FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 Csdpfxomqk Svs Aaqehd General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: Cedpei Dtcnefx Aaqehd 01x shelf connector, used Material color: sendzimir galvanized L-profile dim.: (see below) 298 x 81 mm (4 round holes Ø 9 mm) 250 x 30 mm (one oblong hole) center-center round hole: 278 | 50 mm shelf distance: approx. 250 mm Weight: approx. 0,600 kg / pc. 04x hexagon bolts, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8 General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 39 mm -T slots: slot width 18 mm Chjdpfsxunupsx Aaqed -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 100 kg

Condition: used, Electric chain hoist, electric hoist, crane GIS type PK 250 / F Serial no.: 252 243 Year of construction 1988 Load capacity 2500 kg Hook path 4 meters Main lifting speed 4.1 m/min. Chodpou D T Afsfx Aaqjd Fine lifting speed 0.9 m/min. - 2 load lines good condition

Condition: used, Year of construction: 1984, incl. Eumacop feed, table size: 1100 x 760 mm, table height: 870 mm, speeds: 3000/4500/6000/9000 rpm, height adjustment: 120 mm, weight: approx. 700 kg Chsdpsw E E Epjfx Aaqjd Storage location: Nattheim

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 400 mm -Wall thickness: 43 mm Codpfxjxuntxe Aaqjhd -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 106 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 535x250 mm, height 410 mm -Wall thickness: 39 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H410 mm Codpfx Aexugykjaqshd -Weight: 106 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Codpfsxugx Hjx Aaqjhd -Table surface: 535x250 mm, height 400 mm -Wall thickness: 36 mm -T slots: slot width 18 mm -Dimensions: see photos / technical drawing -Dimensions: 535/250/H400 mm -Weight: 97 kg

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 350 mm -Material: Steel -Dimensions: see photo -Dimensions: 350/250/H200 mm -Weight: 62.3 kg/pc. Codpfxoxugras Aaqohd