Used Grain Mill for sale (765)

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs Iedpfx Aexttc Aod Dsbd TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)

Condition: new, maximum load weight: 29,620 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,410 mm, loading space width: 2,346 mm, loading space height: 1,765 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,345 mm, Year of construction: 2025, Equipment: ABS, Wielton Hardox Steel Tipper Body with 30 m³ Load Volume HP-tipper body with conical design Overhanging pendulum tailgate with grain chute Unladen weight approx. 6,380 kg Features: - BPW disc brake axles - Axle lift with control line - Automatic tipping lowering - SAF gearbox landing legs, full load - WABCO braking system - Semi-round Hardox body, conical design - Overhanging pendulum tailgate with side quick-release lock Ijdpfev I Ivqex Ad Dobd - Central grain chute + additional rotary locks - Double pendulum bearing and replaceable rubber seal - HARDOX floor 4 mm / side wall 3 mm - Roll tarp with quick-release fastener - Operator’s platform mounted to chassis - Hydraulic cylinder Hyva 250 bar - 385/65 R22.5 Bridgestone R179+ tyres on steel rims - 2x additional LED reversing lights - Full LED rear lights - Toolbox - Water tank - Shovel + broom - Aluminum ladder Available to order. Interim sale and errors for this offer are expressly reserved. Only the agreements specified in the order confirmation or purchase contract are binding. For precise equipment details and pricing, please contact our sales staff. Feel free to get in touch.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 Iodpevfxqyefx Ad Dsbd refurbished 2016

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/1994, next inspection (TÜV): 10/2024, * Grain body * 2x tippers * 1x silo * Drum brakes * BPW axles Ibjdpfx Ajxtibnjd Ded * Own power unit * NATO socket ----Internal vehicle number: 11446----- Errors & interim sale reserved.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, warranty duration: 6 months, throat depth: 1,200 mm, working width: 1,200 mm, overall weight: 2,000 kg, table width: 1,200 mm, Veneer Splicing Machine Manufacturer: Fisher Rückle Model: Impetum 1200 Year of manufacture: 2017 Iedpfewlbuysx Ad Dsbd Includes 6-month used machinery warranty For gluing and gap-free longitudinal splicing of parallel-cut veneer strips in a single operation with commercially available urea adhesives. Splicing performance: Feed speed is infinitely adjustable, with a practical value of approx. 20 - 30 m/min. Technical data: Veneer strip length (grain direction): 380 - 3800 mm Veneer strip width (across grain): 45 - 1200 mm Veneer strip thickness: 0.4 - 1.5 mm Feed speed: 5 - 40 m/min Stand throat depth: approx. 1,200 mm Touch panel with temperature, speed, and pressure displays. Data storage of machine settings for recurring jobs. Robust and virtually wear-free stainless steel transport chains. 6 heating zones for different temperature settings. Integrated cooling unit for glue pot cooling. Optionally available: Conversion kit for 3 mm veneers (#8145)

Condition: new, machine/vehicle number: 179, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 r22,5, wheelbase: 1,310 mm, Equipment: ABS, Dimensions Interior length approx. 4,880 mm Interior width approx. 2,420 mm Overall width max. 2,550 mm Unloaded loading height approx. 1,510 mm Frame Central-axle welded steel frame construction in weight-optimized lightweight design with tipper booms and rear tipper shaft; Plug lock for tipper body with crossover safety device Drawbar Cranked drawbar with height-adjustable heavy-duty 50 mm bolt-on drawbar eye (- approx. 110 mm), for truck central axle heavy-duty coupling with coupling height unloaded approx. 800 mm - max. 1,000 mm Support device At the front 1 mechanical support winch with crank on the left in the direction of travel, make of your choice, 1 access bracket bolted on Axles SAF intradrum axles with drum brakes, S-cam brake 420/180 mm, load capacity 9 t/axle, reinforced axle beams, off-road version, automatic brake slack adjusters brake slack adjusters 2 axles Axle spacing 1,310 mm Without axle lift Wheels 4 tires 385/65 R 22.5, 164K, make Fulda Regiotonn 3 HL (tire load capacity 10t / axle) 4 steel rims 11.75 x 22.5, without offset, silver Without spare tire Without spare rim(s) Brake system/suspension Brake system in accordance with EC Directives 71/320 and ECE R13 Dual-circuit air brake system Knorr brake system EBS system 2S2M, 2nd axle sensed RSS/RSP - Stability program Spring-applied parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with Duomatic quick-release coupling EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems SWIT - Schwarzmüller Intelligent Telematics, "BASIC" service package Tipper bridge Welded steel construction Fixed sheet steel front wall 4 mm, approx. 980 mm high 2 steps on the inside and 1 on the outside of the front wall Fine-grain special steel floor plate 5 mm (Slight floor corrugation possible due to welding distortion) 5 pairs of swing-up lashing rings 5 t (width between the lashing rings approx. 2,320 mm) 1-piece reinforced aluminum hollow profile side walls 60/40 mm, approx. 980 mm high, can be folded down with extended swivel bolt locks and spring lifting aid, as well as additionally swingable Left and right side walls with manual central locking 2 rear corner posts at dropside height, fixed to the side Sheet steel rear wall 4 mm (HB400), approx. 980 mm high, swinging with recessed bearing hooks for dosing chains on rear wall and underside of bridge Rear wall lock = automatic pneumatic lock 2 dosing chains for the pendulum rear wall With sealing strips Iedpfxoiyrtue Ad Dobd Hydraulic system 1-pipe system with hydraulic connection hose including SVK DN13 plug-in coupling Tipper press for 3-sided tipping, initial lifting force approx. 30 t; 1 catch

Condition: used, Year of construction: 2019, Overview  This complete beer production and bottling line was built mainly between 2018 and 2019, with some auxiliary equipment dating back to earlier years. It includes all the key process units for brewing, fermenting, filtering, bottling, and packaging beer — from grain milling to palletizing. The line was operated by a brewery that has since ceased operations and is now being sold as a complete package. All machines are in good working condition. Technical data  Capacity: 25 HL brewhouse Products: Beer and related fermented beverages Automation: Semi-automatic control with PLC-based temperature and process management Brewing process: Steam-heated, dual-vessel system with automated temperature steps Installation status: Fully operational before shutdown; currently dismantled and stored Scope of Delivery Brewhouse & Utilities Brewhouse – Inoxdubra BorisBrew 25 HL Mash/Lauter tun: 3,300 L, 2–3 bar Whirlpool/Hot liquor tank: 3,500 L and 2,500 L vessels Material: AISI 304 stainless steel Steam-heated, V-shaped lauter filter rods, insulated design Automated step mashing control with independent agitator inverters Steam boiler – Sogecal NCK-30.8 , 300 kg/h, diesel-powered, incl. condensate and sludge tanks Heat exchanger – TDF Funke FP 22-75-1-NH , 5,000 L/h, dual circuit (wort/water) Cooling tanks – 2x Serap (1995), 3,000 L each, self-contained glycol cooling system Fermenters – 3x Inoxdubra , conical, isobaric, 2x 2,500–2,800 L, 1x 5,000 L, up to 3 bar Bottling & Packaging Filler – Schilpp Contibloc 20/5 (1974), 20 valves, 5 crown cappers (26 mm), up to 4,000 bph (0.33 L bottles) Labeller – Enos Euro C5000 , up to 5,000 bph, suitable for bottles and cans Case sealer – Robopac Robotape 50 M (2004), top/bottom sealing Forklift – Nissan S01 D 16 U (1991), 1.5 t capacity, 4.5 m lift height Filtration, Water & Air Systems Filtration skid – Cespedes 3-stage (2018), 5/3/1 μm filters + cleaning water circuit Dechlorination filter – Pentair DAQ Magnum , 6,000 L/h, activated carbon Air compressor – Kaeser SM 13 , rotary screw, 7.5 kW, with 500 L tank Milling & Pumps Grain mill – Skiold Bemvig RS280 , 5.5 kW, 1,000 kg/h Pumps – Bominox Sanix and Simplex-MS , 2.2 kW each; Inoxpa RV 65 (2022) helical impeller pump, 0.75 kW Additional Accessories Stainless steel piping, hoses, and Tri-Clamp fittings Hop cannon for dry hopping 20 L pilot brewing kit Draft beer columns (4- and 2-tap) with cooling units Stainless steel tables and bar equipment Dishwasher, glass washer, fridge/freezer Keg couplers (KeyKeg, Type A) Ibodpfx Ajxl Tiajd Dsd

Condition: used, mileage: 63,025 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,200 kg, first registration: 01/2021, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 159 Mercedes-Benz Citan 109 CDI EXTRALANG Paint code. * 9147 Paint color Arctic white Interior: * VH5 Fabric Lima black Equipment: * BA2 Brake assist * BB0 Brake system with ABS and ASR * BB3 Electronic stability program (ESP®) * CM1 Side bumper strips * D50 Continuous partition wall * E07 Hill start assist * E1D Digital radio (DAB) * E33 Battery management * F88 Flat blade windshield wipers * FE8 Electric front windows * FF5 Storage above windshield * FG1 Armrest with storage compartment * FI1 System frequency radio key 315 MHz * FKA panel van * FQ3 Glove compartment on passenger side closed * FZ1 Central locking with radio remote control * GK6 6-speed manual transmission * H06 Air conditioning * HF2 Pollen filter * HI2 Climate zone 2 (moderate) * HZ0 Electric auxiliary heater * 5A Standard payload * I5D Diesel * I5N Left side panel * I5T Plastic underbody protection * I5V Foam-covered steering wheel * I5X Basic interior trim * I6C Instrument cluster language German * I6L Without smoker package * I6R Technical regulations Germany * I7B Environmental conditions Europe 1 * I7F Engine series K9K/OM607 * I7L Lockable fuel cap * I7N Left and right exterior mirrors * I7O Grained cover above tail light * I7P Lightly tinted glazing * I7Z Standard refueling * I8C Without partition panel trim * IA0 Wheel formula 4x2 * IB5 Series 415 VS10 * IF6 Van * IG4 Standard * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IN8 Wheelbase 3081 mm * J10 Speedometer km/h * J2W Maintenance interval 2 years * J44 Reversing aid * J47 Trip computer * J58 Seat belt warning device for driver's seat * JI5 Start-up distance maintenance interval 30,000 km * KA1 Particle filter * L04 Automatic daytime running lights * L44 Front side indicators * L67 Trunk lighting * MG9 Generator management * MJ7 ECO start-stop function * MO8 Engine OM608 DE 15 LA 70 kW (95 HP) * MT0 Emissions class Euro 6D-Temp M/N1 Gr. II * MZ0 BlueEFFICIENCY * R87 spare wheel * RD7 wheel hub cover * RF8 tire brand MICHELIN (80) * RN3 tires 195/65 R15 reinforced Iedpfsuq U D Nox Ad Dsbd * RS0 steel wheels 6J x 15 * S02 driver's seat * SA5 driver's airbag * SL1 passenger seat * T16 sliding door right * V29 plastic floor trunk/loading area * VK1 interior paneling * W50 rear door two-wing 180 degrees without window * X99 manufacturer Mercedes-Benz AG * XC9 COC papers * XK8 weight variant 2,200 kg * Z41 registration as a truck GUARANTEE UP TO 36 MONTHS POSSIBLE. TRADE-IN AND FINANCING POSSIBLE. You can also find more vehicles on our homepage:

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Ibsdpfx Adextc Ubo Djd One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Including the following extras: * 2-inch kingpin * One

Condition: used, Year of construction: 2025, DESCRIPTION / DESCRIPCIÓN / DESCRIPTIONHMK 145LC SR-5, 2.3 m stick, 4.6 m boom / 0.70 m3 ? 1200 mm bucket / double-acting hydraulic line, joystick proportional control / hydraulic line support for rotation / hydraulic line for quick coupler / Smartlink GPS+GPRS / air suspension and seat heatingSingle-/double-acting hydraulic lineAuxiliary hydraulic line for rotationHydraulic line for quick couplerSetting the flow rate (liters per minute) on the displaySetting the pressure (bar) on the displayProportional control on the joystickSafety valves for boom and armOverload warning switchRod protectionTravel alarmPneumatic seatSeat heatingRain/sun visorFOPS/sun visorFOPS2 cab protection systemComplete windshield protection cage (stone/rock)2-part boom 4,8 mFront dozer bladeReversing cameraRight side camerasWithout bucket: D.R., 0.6 m3 ? 985 mm ==> 0.75 m3 ? 1210 mm2.6 m arm price differenceBoom cyl. pipe protectionRubber track pads ROAD LINER-500 mmLED working lightAutomatic lubrication system Groeneveld Twin Heavy DutyWarranty 1 year or 2,000 hours, whichever comes first -Certificate 31Upper chassis swing movement. Alarm1 32Leica Ready 2D/3D pre-installation10 33Front dozer blade ready (without blade)1 34500 mm base plates + 4 additional holes for bolting on1INCL. 35600-mm-Bodenplatten1 36700-mm-Bodenplatten1 Iodpeur D Umefx Ad Dsbd 37Rutbber caterpillar plate for bolting on ? 500 mm ? from Hidromek supplier ex works with bolted-on metal rail with 4 additional holes (not in the chain)1 38Rubber track plate for bolting on ? 500 mm ? from SOLIS. Is screwed to the chain, on the metal plate in the middle1 39Additional hydraulic line ? Leakage line1 40Dual high flow ? Double-acting hydraulic line with high flow.1 41Smartlink1 42Single/double acting hydraulic line1 43Auxiliary hydraulic line for rotary movement1 44Hydraulic line for quick coupler1 45Setting the pressure (bar) on the display1 46Proportional control on the joystick1 (*) NB: The prices in the option is valid only when the option is delivery with the machine. Spare parts price can be different..... ..... Subject to prior sale and errors excepted Images show original consumption data

Condition: new, power: 397 kW (539.77 HP), overall weight: 56,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,470 mm, loading space length: 4,800 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH540 Chassis with Wiese Platform Body and Fassi Loader Crane Volvo FH540 10x4 Removable Flatbed with F1150RA.2.28 & Fly Jib, plus Winch and Work Basket ----Application · For good roads, standard operating conditions · Long-distance transport · Predominantly flat topography · Ambient temperature up to +40°C, if above +40°C max. 25 hours/year · Ambient temperature down to -25°C, if below -25°C max. 25 hours/year · Center of gravity (structure and load) approx. 0.5 - 1 m above top edge of frame · Clean roads, max. 10% dirty · Flatbed chassis without pre-installation · Gross combination weight, technical: 80 t (Observe the towing capacity of the trailer hitch!) · Special vehicles · Vehicle for crane behind the cab · Mirrors for body width of 2600 mm · New model · Chassis height: MED (medium), please refer to VBI/WIS for exact height measurements · Electorhydraulically steered trailing axle, single tires · Rear air suspension, tridem, 2 driven axles · Globetrotter safety cab FH · Wheelbase 4,300 mm · Emissions per Euro 6 Stage E, with SCR, particulate filter and EGR · Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm · Volvo Engine Brake+ (VEB+). Braking performance: 340 kW/462 HP (D13S) · Complies with ADR braking regulations · I-Shift AT2612, automated 12-speed transmission (direct-drive), max. input torque: 2,652 Nm · Liftable axle · Drive axle RTH2610B. Tandem axles with hub reduction. 4 planet gears · Longitudinal and transverse differential locks · AA tires 315/80R22.5 · Drive axle ratio 3.33 : 1 · Fuel type: Diesel ---- Scope of Delivery Includes: Base unit: F1150RA.2 xhe-dynamic Wiese platform body with drop sides Iedpfx Ajw D U Iked Debd * Execution of all necessary chassis modifications for crane installation, disassembly and assembly of mounted parts, exhaust system, tanks etc., adjustment of the vehicle frame. All chassis and bodywork modifications are performed in compliance with the respective chassis manufacturer’s mounting guidelines and carried out to the highest quality standards. Complete assembly of a custom-designed and manufactured auxiliary subframe made of fine-grain steel, for crane and body. The welded and bolted subframe to the chassis guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique design of the subframe is a distinctive feature. Designs are executed to the highest standards and painted in the chassis RAL color. * Mounting/bolting of the crane and main stabilizer beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front * Flatbed design as a steel/welded construction, REMOVABLE FLATBED, length approx. 4800 mm x width 2480 mm with hydraulic extension to 1400 mm, radio remote controlled. Flatbed structure in steel / sandblasted / painted in chassis RAL color. Removable aluminum drop sides, Suer brand, 600 mm high, anodized finish. Standard bed floor with welded 4 mm steel chequer plate, painted. 2 rows of MultiSave locking system flush-mounted and welded into the floor. 6 x Thiele lashing rings 5000 daN recessed into base frame. 8 x retractable lashing rings per side 2000 daN, flexible profile/arrangement. Stable front wall consisting of welded frame, welded-on 4 mm steel plate and 5 accessory hooks, front wall height 1300 mm, made of steel / painted in the chassis RAL color. Trimming panels, mudguards in stainless steel (WIESE design). 4x 20' container locks on the front wall (2x) in the extensio...

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, overall weight: 3,980 kg, total width: 1,300,000 mm, This is a vibrating screen with three fractions—an apparatus designed for sorting by grain size. Robust frame, springs where the screen is mounted (to reduce vibration transmitted to the structure). Working width (1,300 mm) At the top, there are two large electric vibrating motors (5.6 kW). Iedpfx Adoxu Drqj Djbd At the bottom, you can see the screen grids (screen thickness 8 mm), through which the material is separated into three fractions.

Condition: new, axle configuration: 3 axles, first registration: 01/2025, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2025, = Additional options and equipment = - Air suspension = Notes = This moving floor agricultural semi-trailer with a 70 m³ capacity, 6 mm floor, and grain discharge gate is available for rental, ideal for grain transport. The trailer is equipped with Powersheet / automatic tarpaulin. For more information, please order. We also have moving floor trailers with a 92 m³ capacity available, featuring high-pressure washer, steering axle, or side doors. For more information, please contact Mark van der Steen. Iodpfx Aexrz Dxsd Debd = Further information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Weights Unladen weight: 7,070 kg Payload: 37,930 kg Gross vehicle weight: 45,000 kg Condition General condition: very good Technical condition: very good Visual condition: very good For more information, please contact Mark van der Steen.

Condition: used, mileage: 63,126 km, power: 66 kW (89.73 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,200 kg, first registration: 10/2018, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle number (for inquiries): 102 Mercedes-Benz Citan 109 CDI EXTRALANG 2nd hand. Full service history. Last service at 54,233 km at Mercedes. Paint code: * 9147 Paint color Arctic white Interior: * I5L Seat cover type "fabric" * VH5 Fabric Lima black Equipment: * BA2 Brake assist * BB0 Brake system with ABS and ASR Ijdpfsttrrbsx Ad Debd * BB3 Electronic stability program (ESP®) * CM1 Side bumper strips * D51 Partition wall with window * E07 Hill start assist * E1M Navigation system, including radio * E33 Battery management * F61 Interior mirror * F68 Exterior mirrors, heated and electrically adjustable * F88 Flat-blade windscreen wipers * FE8 Electric front window lifter * FF5 Storage above windscreen * FG1 Armrest with storage compartment * FI1 System frequency radio key 315 MHz * FKA panel van * FQ3 Glove compartment on passenger side, closed * FZ1 Central locking with radio remote control * GK5 5-speed manual transmission * H06 Air conditioning * H15 Seat heating for passenger * H16 Seat heating for driver * H22 Heated rear window * HF2 Pollen filter * HI2 Climate zone 2 (moderate) * HZ0 Electric auxiliary heater * I5A Standard payload * I5D Diesel * I5F Steel roof * I5H Front seat belts with height adjustment * I5M Color matching interior 1 * I5N Left side panel * I5T Underbody protection plastic * I5V Foam-covered steering wheel * I5X Basic interior trim * I5Y With heated front seats * I6C Instrument cluster language German * I6J Mercedes-Benz production scope * I6R Technical regulations Germany * I7B Environmental conditions Europe 1 * I7F Engine series K9K/OM607 * I7J Standard map material * I7L Lockable fuel cap * I7O Cover above Grained tail light * I7Q heavily tinted glazing * I7Z standard fueling * IA0 wheel formula 4x2 * IB5 series 415 VS10 * IF6 panel van * IG4 standard * IG5 basic * IK0 complete vehicle * IL1 domestic (Germany) * IL4 region EU/EFTA * IL5 left-hand drive * IN8 wheelbase 3081 mm * J10 speedometer km/h * J2W maintenance interval 2 years * J44 reversing aid * J47 trip computer * J58 seat belt warning device for driver's seat * J65 outside temperature display * JI6 starting distance maintenance interval 40,000 km * KA1 particle filter * L04 automatic daytime running lights * L44 front side indicators * L67 trunk lighting * MB6 emission class Euro 6B M/N1 Gr. II * MG9 generator management * MJ7 ECO start-stop function * MO2 engine OM 607 DE 15 LA 66 kW (90 HP) 4000/min * MZ0 BlueEFFICIENCY * R87 spare wheel * RD7 wheel hub cover * RD9 tires without manufacturer specification * RM7 summer tires * RN3 tires 195/65 R15 reinforced * RS0 steel wheels 6J x 15 * RY2 tire pressure monitoring on front and rear axle, wireless * SA5 driver airbag * SA6 passenger airbag * SD0 ISOFIX child seat attachment * SL1 passenger seat * SL3 driver's seat height adjustable * T16 sliding door right * V29 plastic floor trunk/loading area * VK1 interior paneling * W50 rear door two-wing 180 degrees without window * W78 window in Rear hatch/rear door with wiper and washer system * W84 tinted rear window, heavily tinted * XC9 COC papers * XK8 weight variant 2,200 kg * Y10 first aid kit * Y44 warning triangle * *

Condition: used, empty load weight: 6,100 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 11/2009, next inspection (TÜV): 10/2026, loading space length: 6,995 mm, loading space width: 2,300 mm, loading space height: 2,250 mm, loading space volume: 36 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2009, Equipment: ABS, Unladen weight: 6,100 kg, permissible total weight: 32,000 kg, cargo area (L x W x H): 6,995 mm x 2,300 mm x 2,250 mm. Tyre size: 385/65 R22.5, cargo volume: 36 m³, 1st axle: , 2nd axle: , air suspension, foldable underrun protection, electronic braking system (EBS), pendulum tailgate, sliding roof, connection plug 1x15 and 2x7 pin, grain tipper. You will find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer customised financing options, full service and telematics solutions. We are happy to advise you. Ibedpjxr R T Nofx Ad Dod

Condition: like new (used), functionality: fully functional, power: 94 kW (127.80 HP), fuel type: diesel, overall weight: 34,000 kg, Year of construction: 2022, operating hours: 1,238 h, Output capacity up to: approx. 500 t/h Maximum feed size: 800 x 500 x 300 mm Feed height: approx. 3,570 mm Feed height with rear wall folded down: 2,830 mm Hopper volume: 9.1 m³ Hopper discharge belt width x length: 1,400 x 4,500 mm Screening type: double-deck heavy-duty screen Screen area upper deck: 1,550 x 4,880 mm (W x L) Screen area lower deck: 1,550 x 4,500 mm (W x L) Fine material conveyor width x length: 1,200 x 4,380 mm Fine material discharge conveyor width / length / discharge height: 900 x 7,760 / 2,960 to 3,980 mm Medium grain discharge conveyor width / length / discharge height: 900 x 7,760 / 2,310 to 3,630 mm Isdexl Szzepfx Ad Djbd Oversize discharge conveyor width / length / discharge height: 1,400 x 6,065 / 2,650 to 4,050 mm Drive concept: diesel-hydraulic Engine manufacturer: John Deere Drive unit power: 94-98 kW Transport dimensions: 15,840 x 3,000 x 3,400 mm (L x W x H) Transport weight: 34,000 kg

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 330 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted Isdpfevywf Eox Ad Dobd in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: used, maximum load weight: 31,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2015, next inspection (TÜV): 09/2025, loading space length: 11,700 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, According to our "General and Stipulated Terms and Conditions" and with no guarantee or warranty, we are pleased to offer you today, subject to prior sale, error, and misprints, the following vehicle: Kempf 55 cbm Steel Tipper Body ( Vehicle 105 ) Iodpfextcp Ssx Ad Debd First registration: 22.10.2015 Permissible total weight: 39,000 kg Tare weight: 7,500 kg Payload: 31,500 kg Overall length: 11,850 mm Overall width: 2,550 mm Overall height: 4,000 mm TÜV inspection valid until 09/2025, Safety Inspection (SP) until 03/2026 Load gauge Access ladders front left and right Roll tarp with battens Drop supports 2 x 5 x ALCOA aluminium wheels, 1 x steel rim BPW disc brakes Tyres: 385/65R22.5 – 1st axle approx. 50/40%, 2nd axle approx. 30/70%, 3rd axle approx. 40/70% 1st axle: lift axle 2 x LED reverse lights A-sign foldable Folding underrun protection Portal doors 1/2 and 1/2 Grain chute Boarding ladder Price: €14,500.00 (net) All information provided without guarantee or warranty. Our "General and Stipulated Terms and Conditions" apply. Place of jurisdiction for both parties up to a disputed value of €50,000 is the District Court of Ludwigslust, and for amounts exceeding this, the Regional Court of Schwerin. Subject to error, misprints, and prior sale.

Condition: new, functionality: fully functional, power: 56 kW (76.14 HP), Housing: Standard Structure: Stationary frame, including hooklift function for on-site mobility Color: RAL 5003 | RAL 7047 | RAL 7016 Drive: 100% electric Power: 56 kW Ibsdpswylvdjfx Ad Djd Hydraulics: electronic mobile control Feed hopper: Standard Discharge conveyor - final grain: belt width 650 mm Discharge conveyor - oversize grain: belt width 800 mm Voltage: 400V ±5% / 50Hz Mains type: TN-C/(S) Operation: 6.5" panel, incl. CANBUS Remote control: 4-button Central lubrication: automatic Toolbox: 1x included Fire extinguisher: 1x included

Condition: used, Year: N/A Condition: very good Configuration: - automatic folding machine - under-pressure loading with suction wheel - 2 pockets, manual adjustment Technical specifications: - max. sheet format (l x w) - 674x365mm - min. sheet format (l x w) - 160x140mm (width 94mm with accessories) - max. speed - up to 27,000 sheets per hour Ibjdpfxjww H E Uj Ad Ded - min. stock length - 46 mm - number of fractures - 2 in parallel - minimum paper weight - 60 g/m2 - maximum paper weight - 240 g/m2 (depending on paper quality and grain direction) - feeder capacity - 500 pieces A4 80g/m2 - voltage - 230V - machine dimensions (l x w x h) - 1240 x 555 x 1370 mm - machine weight - 132 kg

Condition: used, empty load weight: 5,900 kg, maximum load weight: 33,100 kg, overall weight: 39,000 kg, first registration: 08/2011, next inspection (TÜV): 03/2026, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: silver, Year of construction: 2011, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40135 Schmitz, SKI 24 * Year of manufacture: 2011 * ABS, Anti-lock Braking System * Air suspension * Lift axle * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering device * Galvanized * Aluminum tipping body * Access platform * Sliding tarpaulin cover * Grain discharge slider * Sludge-tight * Pendulum tailgate * Inspections: Main/Emissions test valid until 03/2026 * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 5,900 kg * Payload: 33,100 kg * Permissible gross weight: 39,000 kg * Axle manufacturer: Schmitz Rotos * Tire condition 1st axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Schmitz SKI 24 SL 96 * Approx. 50 m³ Liability disclaimer: Specifications subject to change, prior sale, and errors excepted. More photos and videos available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Handling of all (export) documentation Ijdpoxrkcdsfx Ad Dobd * Arrangement of export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV approvals, registration services * Transport of commercial vehicles Contact our trained specialist staff for advice. We are happy to help.

Condition: used, mileage: 3,000 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,021 kg, first registration: 04/2025, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * To ensure you receive the best possible advice from us, we kindly ask you to arrange an appointment. * Mr. Kiel will be pleased to assist you * Tel: Special Equipment * H06 Air conditioning * Q10 Cross member for trailer coupling * R2D 40.6 cm (16") steel wheels with hub caps * SA8 Seat comfort package * SK5 Automatic passenger airbag deactivation Standard Equipment * BA3 Active Brake Assist * BB0 Braking system with ABS and ASR * BB3 Electronic Stability Program (ESP) * B26 Parking brake * CL1 Steering wheel adjustable for tilt and height * C6L Multifunction steering wheel * D50 Full-length partition wall * EC5 Preparation for Digital Extras * EW6 Preparation for Remote Services Plus * EY2 Preparation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * E07 Hill-start assist * E1D Digital radio (DAB) * E3O MBUX multimedia system with 9.5-inch display * E4S Smartphone integration package * FE8 Electric front windows * FQ3 Glove compartment, passenger side, lockable * FR8 Reversing camera * F2U Rear parking assist * F4W Washer fluid tank with increased volume * F58 Mirror in driver's sun visor * F68 Exterior mirrors heated and electrically adjustable * GK6 6-speed manual transmission * H10 Seat heating for driver and passenger * H20 Heat insulating glazing all round * IG4 Standard * IM1 Wheelbase 2,716 mm * IO4 Without rain kit * I03 Rear side wall without window * I44 16" steel wheels * I5A Standard payload * JA5 Light and rain sensor * JB4 Active Lane Keeping Assist * JH3 Communication module (LTE) for digital services Ibjdpfxsxtb Sle Ad Dsd * JK5 Instrument cluster with color display * JQ1 Traffic sign assist B * JQ2 ATTENTION ASSIST B * J10 Tachometer km/h * J56 Seat belt reminder for driver and passenger seat * KA1 Particulate filter * KL5 Fuel filter with water separator * L12 Halogen headlamps * MJ8 ECO start/stop function * MS1 Cruise control * MT8 Emission class Euro 6E M/N1 GR. II * MW5 Engine OM 608.9 DE 15 LA 70 KW (95 HP) * RD9 Tires without specification of make * RM7 Summer tires * RY2 Tire pressure monitoring at front and rear axles, wireless * SA4 Airbag driver and passenger * SD1 i-Size child seat attachment * SF6 Driver's seat height-adjustable with lumbar support * SH5 Thorax sidebags and windowbags front * SL2 Passenger seat, height adjustable * T16 Sliding door right * VG0 Center armrest and door panels in black grained finish * V4V Plastic floor in front passenger compartment * WE1 Factory control code * W50 Rear door double-winged 180 degrees without window * We would be pleased to make you an offer for the trade-in of your used vehicle. * Should you wish to lease or finance your vehicle, we will be happy to provide you with an individual offer. * Subject to errors and prior sale. * Mr. Kiel will be pleased to assist you,

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single axle. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. Iodpfx Asvywgied Debd ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: used, maximum load weight: 27,520 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/2003, loading space length: 9,400 mm, loading space width: 2,450 mm, loading space height: 1,950 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, According to our “General and Stated Terms and Conditions”, we offer the following vehicle today without any guarantee or warranty, subject to confirmation until conclusion, with errors, typing mistakes, and prior sale reserved: Ibodpfx Asw Ua E Ied Djd Carnehl approx. 44 cbm Grain Tipper Body (Vehicle 78) First registered: 01.12.2003 TÜV (Inspection): 03/2025, SP 09/2025 Permissible gross weight: 34,000 kg Unladen weight: 6,480 kg Payload: 27,520 kg Overall length: 10,400 mm Overall width: 2,550 mm Overall height: 3,600 mm Internal length approx. 9,400 mm (top)/9,000 mm (bottom) (body is tapered) Internal width approx. 2,450 mm Internal height approx. 1,950 mm Steel chassis, aluminium box body Roll tarp, access platform Swing tailgate with grain chute Floor and side walls in good condition 1st axle lift axle BPW drum brakes Tyres 385/65R22.5 – 1st axle approx. 40/40%, 2nd axle approx. 70/70%, 3rd axle approx. 40/40% ALCOA LM rims 2 x wheel chocks Price: €8,500.00 (net) All details are given without any guarantee or warranty. Our “General and Stated Terms and Conditions” apply. Place of jurisdiction for both parties up to a disputed value of €50,000.00 is the District Court of Ludwigslust; for higher disputed values, the Regional Court of Schwerin shall have jurisdiction. Errors, typing mistakes, and prior sale reserved.

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 330 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe Ijdpfx Asvywgped Debd ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height