Used Granite for sale (253)

Condition: new, Year of construction: 2023, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 300 kg, path measurement accuracy: 2 mm, overall weight: 435 kg, travel speed (max.): 30,000 mm/min, compressed air connection: 5 bar, Equipment: documentation/manual, type plate available, The COORD3 Benchmark 06.05.05 is a high-quality, CNC-controlled portal measuring machine (half-gantry type) designed for accurate 3D product inspection. The machine combines a stable mechanical structure with high measuring speeds, making it suitable for use in both temperature-controlled measuring rooms and controlled production environments. Gjdpfxoz Eh T Re Al Uebu 𝗘𝘅𝗰𝗲𝗹𝗹𝗲𝗻𝘁 𝗰𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻 (𝗗𝗲𝗺𝗼𝗻𝘀𝘁𝗿𝗮𝘁𝗶𝗼𝗻 𝗺𝗼𝗱𝗲𝗹): This CMM is in near-new condition. The machine has only been used as a demonstration model and therefore has seen very little use. There is no production wear, meaning the system is in absolute top condition, both mechanically and electronically. 𝗛𝗶𝗴𝗵 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝘃𝗶𝘁𝘆 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗣𝗛𝟮𝟬 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗵𝗲𝗮𝗱: The machine uses the advanced Renishaw PH20 probe head. This head uses ‘head touches’ (fast pivoting movements of the head itself) instead of moving the entire machine axes. This results in a measuring cycle that is up to three times shorter compared to traditional systems. 𝗛𝗶𝗴𝗵 𝘁𝗵𝗲𝗿𝗺𝗮𝗹 𝘀𝘁𝗮𝗯𝗶𝗹𝗶𝘁𝘆 (𝟭𝟲 - 𝟮𝟲 °𝗖): Thanks to the optional multi-sensor temperature compensation system, the machine maintains its accuracy over a wide temperature range. This makes the CMM suitable for use near the production line without requiring a strictly temperature-controlled environment. 𝗗𝘂𝗿𝗮𝗯𝗹𝗲 𝗮𝗻𝗱 𝘀𝘁𝗮𝗯𝗹𝗲 𝗳𝗼𝘂𝗻𝗱𝗮𝘁𝗶𝗼𝗻: The machine bed consists of a solid granite table with integrated guides (flatness according to DIN876/III). Because all axes are equipped with air bearings, there is no mechanical friction or wear, which guarantees long-term repeatability. 𝗖𝗼𝗺𝗽𝗮𝗰𝘁 𝗮𝗻𝗱 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻: The CNC controller and the PC are integrated into the machine's base. This saves valuable floor space in your workshop or measuring room. The monitor and keyboard are mounted on a flexible, pivoting operator arm. 𝗠𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗿𝗮𝗻𝗴𝗲 𝗮𝗻𝗱 𝗰𝗮𝗽𝗮𝗰𝗶𝘁𝘆: The effective measuring volume is 600 mm on the X-axis, 500 mm on the Y-axis, and 470 mm on the Z-axis (reduced from 500 to 470 mm due to the physical design of the PH20 head). The robust granite table is designed to support heavy workpieces with a maximum product weight of up to 300 kg. 𝗛𝗶𝗴𝗵 𝘁𝗿𝗮𝘃𝗲𝗿𝘀𝗲 𝘀𝗽𝗲𝗲𝗱 𝗮𝗻𝗱 𝗱𝘆𝗻𝗮𝗺𝗶𝗰𝘀: The machine is equipped with a powerful NC drive via DC motors with backlash-free friction drive on steel guides for all axes. This results in an impressive maximum positioning speed of 30,000 mm/min (500 mm/s) and a maximum acceleration of 1500 mm/s², allowing measuring programs to be executed with minimal pauses. 𝗖𝗲𝗿𝘁𝗶𝗳𝗶𝗲𝗱 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝗮𝗰𝗰𝘂𝗿𝗮𝗰𝘆: The machine's performance has been fully verified according to the strict international UNI EN ISO 10360-2 standard. With the PH20 measuring head, the system guarantees a path measuring accuracy (MPE) of 2.7 + 3.0L/1000 µm under optimal conditions (18-22 °C), and a maximum repeatability accuracy (MPL) of 2.5 µm. The maximum form measuring error of the probe (MPE PFTU) is 2.7 µm. 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀: For the commissioning of this CMM, a stable compressed air supply is required with a minimum pressure of 5 Bar (71 PSI) and a constant air consumption of 90 Nl/min. The electrical installation is very simple and requires a standard single-phase power supply of 230 V (±10%) at 50 Hz. The total machine weight, including the base, is 435 kg (excluding PC peripherals).

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 282015 SDU8300, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 8 m/min, spindle speed (max.): 45,000 rpm, table width: 1,500 mm, table length: 1,000 mm, total height: 2,200 mm, total width: 2,800 mm, total length: 1,950 mm, type of input current: AC, input voltage: 400 V, spindle motor power: 6,000 W, CNC machine for powerful machining. The steel/granite sandwich construction for the moving axes, such as the gantry and cross slide, can optionally be driven by AC servomotors via ball screws or by linear motors. In conjunction with high-precision linear guides, it forms the basis of the massive steel/granite machine construction. The advantages of natural stone granite combined with high-strength, lightweight metal offer the highest stiffness while simultaneously reducing weight. This is the only way to achieve the desired dynamics and high feed rates. High-frequency spindles with up to 6.0 kW and 45,000 rpm with HSK25 / HSK32 tool holders are used as milling spindles. The 18-position tool changer (expandable to 36 tools), installed outside the working area, automatically moves from the protective housing to the milling spindle. With the 4th/5th axis designed as a swivel head and the integrated, high-precision gear drive modules, almost all positions of a complex workpiece can be reached with the milling tool. The machine is completed with new, state-of-the-art CNC control functions and an easy-to-use user interface. This allows for 5-axis simultaneous machining via RTCP (Rotation Tool Center Point) function. The control and operating components from Heidenhain include a touchscreen monitor and a comfortable handwheel. Different workpiece clamping systems can be mounted on the universal granite table via steel threaded bushings in a 150x150 mm grid. -Innovative steel/granite sandwich construction -State-of-the-art control technology based on Heidenhain -Automatic tool changer with tool measurement/inspection -Optionally with high-dynamic linear motors or ball screw drives -4th/5th axis as a swivel head or rotary tilting unit on the machine bed -RTCP, TLC, axis kinematics and clamping position compensation -Metal/granite sandwich construction -Rotary/swivel swivel head (4th and 5th axis) -High-dynamic linear motors in the X and Y axes -18-position tool changer, expandable to 36 tools -Heidenhain® TNC640 high-end control Godpfxozzzylj Al Ujbu -Tool measurement by tool setter or laser -3D edge probe -Modern control panel -Water cooling -Heidenhain® LMT TT160 / optional laser measurement -3D measuring probe -Handwheel -Minimum quantity lubrication -Tool holders Ideal for machining: Brass Aluminum Ceramics Plastic Copper

Condition: used, Year of construction: 2008, Coordinate Measuring Machine Wenzel XO 55 (Year of Manufacture 2008) in well-maintained and fully functional condition. The machine is based on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The XO 55 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Special features: Core drilling for installation with rotary-tilt frame Included transport frame: On loan Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Exchange bridge: SCR200 (empty) Joystick: HT400 Probe interface: PI200 head interface: PHC10-2 Probe module: 1 × TP200 Standard Force Module Gbedpfx Aljyyulnj Uou Probe head: PH10T Probing system: TP200 PC System: Windows 11 (current configuration) Controller: WPC2030 Installed software: WM | Quartis R2026-1 Measuring range Z: 500 mm Measuring range Y: 1.000 mm Measuring range X: 500 mm

Condition: new, functionality: fully functional, The Trimos V1+ is the enhanced version of the proven V1 and is ideal for users seeking top precision combined with effortless operation. It offers all the benefits of the V1, complemented by bidirectional measurement that enables diameter, centerline, and comparative measurements – a real advantage over conventional entry-level models. Manufactured in Switzerland, the V1+ stands for quality, durability, and outstanding repeatability. It is perfectly suited for workshop, inspection room, and production environments. Thanks to its ergonomic design, stable base, and sensitive guidance, the V1+ can be operated precisely and safely. The constant measuring force ensures consistently reliable results. Models V1+: V1+ – 600 Gedpfxjxu T Emj Al Ujbu Measuring range (mm): 611 Accuracy (mm): 0.025 Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. travel speed (mm/s): 1500 Weight (kg): 8 (steel base) / 15 (granite base)

Condition: used, mileage: 125,000 km, power: 206 kW (280.08 HP), first registration: 03/2009, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN 15 280 Horse Truck, 5 Horse Capacity, Pop-Out Private sale, VAT not included. * 5 sleeping berths * Leather seating area with table, convertible into a sleeping area * Sleeper cab above the driver's cab * Additional bed above the bathroom * Automatic climate control * Webasto auxiliary heater * Dometic diesel generator * 300-liter fresh water tank * Large hot water boiler * High-quality kitchen with granite countertop * Refrigerator and microwave * Large bathroom with shower, sink, and toilet * TV and sound system * Numerous storage and wardrobe compartments Horse compartment for 4-5 horses * Padded, adjustable aluminum partitions * Soft rubber flooring * Feed trough * 2 electric roof vents * Electric fan * Opening windows * Video surveillance * Interior lighting * Ceiling storage * Direct access to the living area Exterior & Storage * Rear and side ramp with ramp limiters * Large lockable storage compartments * Separate tack room * Horse shower * Show box included in the purchase price Errors/input errors and prior sale reserved. * NET PRICE POSSIBLE. * Top leasing offers Gbsdpfoz Hta Eox Al Uju Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the field of horse trucks and trailers. Please arrange an appointment in advance. Contact: Richard Theurer and Andreas Theurer

Condition: ready for operation (used), Year of construction: 1986, Offered is a 3D coordinate measuring machine. Working area X/Y/Z: 850mm/1200mm/600mm, probe holder: Renishaw PH10M, table surface: granite plate, resolution: 0.1µm, air supply: 5bar, control: Zeiss CMM Controller. Equipped with control panel with joystick, SCR200 probe change magazine, calibration sphere, extensive probe accessories. Weight: approx. 2400kg, overall dimensions X/Y/Z: approx. 2100mm/1900mm/2350mm. Inspection possible by arrangement. Gedsy T N H Tspfx Al Usbu

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 800 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, warranty duration: 12 months, type of input current: AC, input voltage: 230 V, compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, High-Precision Reference Measuring Center – Mahr OMS 800/500 HA Multisensor Coordinate Measuring Center with Extended Z-Axis Measuring Range Factory overhauled and modernized in 2025 – ready for immediate use. Technical Data Measuring range: 800 × 800 × 500 mm Gjdpfoxbyxyjx Al Uobu Sensors: - Optical sensor: Camera & laser (active measurement) - Renishaw TP200 touch probe (other options: TP20, SP25, etc.) - Camera system with 10x objective (optional: 1x, 5x, 20x) - 3D multisensor head MSH with transmitted light, incident light, laser & probe mount Software: OptiCheck3D 2025 – user-friendly, interactive programming Evaluation station: High-performance PC with Windows 11 Professional (64bit) Accuracy: - Length measurement uncertainty: E1 = 0.9 + L/600 µm - E3 = 1.9 + L/400 µm (L in mm) - Scale resolution: 0.1 µm Dimensions / Weight: - Size: 2360 × 1940 × 3300 mm - Weight: approx. 8090 kg - Max. workpiece weight: 50 kg (glass), 100 kg (granite), extendable - Traverse speed: max. 200 mm/s Device Details Model: Mahr MarVision OMS 800/500 HA CNC Design: High-precision, air-bearing multisensor measuring center Special feature: Active vibration damping (BILZ Bi Air) Condition: From laboratory use in precision measurement room, factory-refurbished in 2024 New price of comparable equipment: from approx. €650,000 Delivery time: approx. 4 weeks from order Highlights - Leasing option: 0% interest, without bank transaction - Factory overhaul 01/2024 with warranty & guarantee - Live demo: Available online or on-site - Optional service package: Worldwide transport, commissioning, calibration/certification, training, user instruction - 18 months free: Software update service & hotline support - Software: Full license OptiCheck3D (no subscription fees) - Remote service: Online board support directly at the measuring device - Custom modifications & retrofits on request - Latest 64-bit CNC controller & evaluation station (Windows 10/11) Supply & Environment - Compressed air: 6 bar ±0.1 bar (filtered, ISO 8573-1, consumption approx. 160 Nl/min) - Voltage: 115/230 V ±10%, 50/60 Hz ±5%, 2500 VA Environment: - Temperature: 20 °C ±1 K - Humidity: 40–70% RH - Vibrations: < 5 µm amplitude at < 5 Hz Service & Demo - Online demos available at short notice - Optional on-site demonstration at customer location

Year of construction: 2009, condition: ready for operation (used), table load: 20 kg, Optical measuring machine manufactured in 2009. This TESA visio 300 dcc features a measuring range of 300 mm in the X-axis, 200 mm in the Y-axis, and 200 mm in the Z-axis. It includes a high-resolution CCD camera and interchangeable zoom optics for enhanced measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA visio 300 dcc machine we have for sale. Contact us for further details. • Usage: Laboratory environment • Calibration: Regularly calibrated; last calibration in 2025 • Measuring range (approx.): • X-axis: 300 mm • Y-axis: 200 mm • Z-axis: 200 mm • Accuracy: • Measurement resolution: up to 0.5 µm • High repeatability in the micron range • Optical system: • High-resolution CCD camera Godpfx Aljyn Efys Uobu • Zoom optics / interchangeable lenses (depending on configuration) • LED illumination: top and bottom (surface and contour lighting) • Table: • Granite measuring table • Power supply: 230 V / 50 Hz Additional equipment • PC-DMIS software (license included on USB dongle)

Condition: good (used), functionality: fully functional, total width: 500 mm, total length: 7,000 mm, plate height: 600 mm, Granite measuring beam from Johannes Fischer Aschaffenburg Dimensions: 7000x500x600 mm Milled recess in the upper running surface Drill holes on the top Quality grade is still being verified (likely better than grade 0 according to DIN876) Gsdpfx Aeym R U Rel Uobu Optional additional machining available at extra cost

Condition: used, Technical details: Length: 1000 mm width: 630 mm height: 150 mm height over floor: 890 mm Gbodpfxezb Ux Ao Al Ueu weight of the machine approx.: 250 kg space requirements of the machine approx.: 2,5 m x 2,2 m m WENZEL Precision Granite Surface Plate 1000 × 630 mm WENZEL granite surface plate 1000 × 630 mm with minor edge chips and signs of use (see photos). A WENZEL granite surface plate measuring 1000 × 630 mm (typically approx. 150 mm thick) is a high-precision inspection and measuring surface made from natural hard stone (granite). WENZEL Metrology is internationally recognized for manufacturing extremely stable, low-distortion granite surface plates used as stress-free reference surfaces in metrology laboratories, quality control departments, toolrooms, and precision manufacturing environments. *

Condition: ready for operation (used), Plate size: 1900 x 1820 mm Plate thickness: 405 mm with 20 mm offset surface: 1820 x 385 mm Weight approx .: 4 t Gedpfx Ashc S Rnjl Uebu

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 900 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 660 mm, overall weight: 3,050 kg, table load: 1,250 kg, number of axes: 3, This 3-axis Other SHEFFIELD Endeavor 9.15.7 was manufactured in 2003. It features an X-axis travel of 900 mm, Y-axis travel of 1500 mm, and Z-axis travel of 660 mm. The machine is equipped with a granite table and brushless linear motors on the X and Y axes. If you are looking to get high-quality measurement capabilities, consider the Other SHEFFIELD Endeavor 9.15.7 CMM machine we have for sale. Contact us for further details. • CE Marked • Maximum 3D Speed: 39 m/min • Maximum 3D Acceleration: 1.7 m/s² • Voltage: 240 V • Accuracy Standard: DIN EN ISO 10360-2 • Specified Accuracy Temperature Range: 15°C – 25°C • Volumetric Length Measuring Error (MPEE): 2.8 + L/263 µm • Volumetric Probing Error (MPEP): 3.0 µm • Maximum Hourly Temperature Gradient: 2°C/h • Maximum Daily Temperature Gradient: 5°C/24h • Maximum Spatial Temperature Gradient: 1°C/m • Permissible Ambient Temperature Variation: ±5°C • Granite Table • Threaded Inserts: ISO M8 x 1.25 • Air Bearing Axes • Brushless Linear Motors on X and Y Axis • Renishaw High-Resolution Linear Scales • Geometric Error Compensation • Automatic Volumetric Temperature Compensation • Probe Head: Renishaw PH10MQ • Probe Head Weight: 645 g • A-Axis Indexing Range: 0° to 105° in 7.5° Increments • B-Axis Indexing Range: ±180° in 7.5° Increments Gsdpfszcwfbjx Al Usbu • Positioning Repeatability: 1 µm • Maximum Extension Length: 300 mm • Probe Head Mount: M10 Thread • Probe Connection Thread: M8 Thread • Probe System: Renishaw TP20 • Reference Sphere Diameter: 19 mm • Parallel Port Sale WITHOUT Software License

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Gbjdpfx Aoxdi Agol Ueu

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 3 t measurement range X =: 650 mm Gjdpfovap Sksx Al Usbu measurement range Y =: 1200 mm workpiece weight: 700 kg traversing speed: 200 mm/s capacity: 1000 VA Design: Portal measuring center with fixed measuring table and laterally driven portal, measuring table, traverse and quill made of granite. All axes are equipped with high-precision air bearing guides. It is driven by DC servo motors. Control: 3-5 axis microcontroller with vector path control Measuring system: Incremental length measuring system, resolution 0.5 m Computer: Industrial PC, Pentium class, Windows 2000 operating system, multilingual Software: MarSoft Vision 3D multisensor 3D, measuring software *

Condition: used, empty load weight: 8,884 kg, maximum load weight: 20,116 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 05/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,400 mm, loading space volume: 80 m³, total length: 13,550 mm, suspension: air, tire size: 385/65R22,5, color: white, gearing type: mechanical, Equipment: ABS, cooling unit, valid as long as vehicles from the available stock are available, various rental vehicles immediately available, Carrier Vector refrigeration unit, 2-ton tail lift, two-axle, forced steering unit, lease-to-own option, monthly lease-to-own rate €1679, term 72 months, after expiration - purchase at residual value or return or new vehicle, full-service rental with option for later purchase, body length approx. 13,410 mm, total weight (permissible/technical) 29,000/30,000 kg, body width approx. 2,490 mm, unit load (permissible/technical) 18,000/18,000 kg, body height approx. 2,400 mm, drawbar load (permissible/technical) 11,000/15,000 kg, usable body length approx. 13,395 mm, unladen weight complete +/- 3% 8,702 kg, usable body height approx. 2,300 mm, saddle height 1,150 mm, overall height front unladen approx. 3,873 mm, external wheelbase approx. 13,550 mm, overall height unladen approx. 3,871 mm, body width overall approx. 2,600 mm, overall height rear unladen approx. 3,870 mm, ride height 370 mm, loading height rear unladen approx. 1,390 mm, wheelbase 8,075 mm, tire size 385/65R22.5, rear door height approx. 2,390 mm, rear door width approx. 2,490 mm, f2fs24 fs22 chassis, fs18, CARGOBULL, HIGHLIGHTS, registration/license plates P02173, 2 identification plates rear 565x200 ECE-R70 on tail lift platform X90292, vehicle complies with EC type approval with Certificate of Conformity (CoC) X91036, country of registration: "GERMANY", X91501, without HACCP certificate, X90125, without international customs seal, chassis C00283, galvanized bolted short chassis for self-supporting body (LZG), C20000, underrun protection in connection with tail lift, C31032, king pin: 2'' according to SAE standard, interchangeable, 1 king pin, 1600mm, C40022, E-wheel holder, body design for 2 E-wheels in front of the unit, SKO COOL, C00301, 10 years warranty against rusting on hot-dip galvanized parts (see warranty conditions), X00108, side impact protection according to RL 89/297/EWG, color: SCHMITZ GRANIT, axles A01008, ROTOS SCB running gear system (disc brake), A32074, 2 x SCB 9 t axle, SP2040, FM1300, ET 120, disc brake 430 mm, A00841, brake disc diameter approx. 430mm, R00053, wheel fastening by center. Gbodpsx Nbhbsfx Al Uou

Condition: like new (used), functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, warranty duration: 3 months, year of last overhaul: 2024, Fully retrofitted manual floating CMM Mitutoyo Euro M544 (originally built ´97) retrofit 2024 with DEVA electronic and Inspect 3D Inca Premium software Measuring ranges: x-axis 500 mm y-axis 400 mm z-axis 400 mm Accuracy acc. ISO 10360 E = [3,5 + 4,0L/1000] µm at temperature range from 18 … 22 °C base material Granit Fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale resolution 0,0005 mm Electronic DEVA001 Probe Head Reniashaw MIH (used) Gedsk Arxtopfx Al Usbu Touch probe Renishaw TP20 (new) on demand: - Renishaw MH20i € 3.500,-- - Inspect3D Inca Premium latest version (plus € 4.000,--) - Aberlink 3D software (with free updates) € 1.500,-- - installation, calibration softwaretraining Incl. 3 month warranty within EU (excl. travel costs)

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and complies with the regulatory requirements of environmental authorities. All required climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-damped granite for vibration-free installation of an ultra-microbalance Ionization device against static charge Flow protection to shield the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, grounding bolts Advantages: Complies with regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Gsdpfx Alozd Ukis Ujbu Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45% RH ± 3% Dimensions W/D/H 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible. Gsdsyypmmspfx Al Uebu

Condition: new, functionality: fully functional, The Trimos V1+G stands for Swiss precision at the highest level – combined with simple, intuitive operation. The solid granite base ensures absolute stability, making the device the perfect choice for precise height and comparative measurements in workshop and production environments. Gsdpfx Aloxu T Hws Uebu The V1+G has been developed for users seeking a robust, durable, and straightforward height measuring instrument. It simplifies daily measurement tasks and, thanks to bidirectional measuring capability, also offers functions for diameter, centerline, and reference measurements – all without complicated menu navigation or extensive training. Model V1+: V1+ – 600 Measuring range (mm): 611 Accuracy (mm): 0.025 Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. traversing speed (mm/s): 1500 Weight (kg): 15

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Gsdpfjzyzzyox Al Uebu Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.

Condition: reconditioned (used), Year of construction: 2008, machine/vehicle number: FARO-PT08, Faro Fusion Arm in top conditionArm 7 axis, length 6ft (appx. 1,8m) Accuracy 36/51µm Last calibration 2011 incl. very new Aberlink 3D software (free updates) Windows 10 PC or notebook (used) on demand Inca Premium software (+ € 4.000,--) or other application (Polywork, PcDmis, MComos.) Godpfepqx Ifjx Al Usbu On demand we can deliver a granit plate with 1500x1000mm. Softwaretraining possible

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software year of manufacture: 1998 without PC!!! Gbsdpfx Aou E Uzxjl Uju X - axis 500 mm Y - axis 700mm Z - axis 400 mm resolution: 0.0005 mm Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, maximum height: 480 mm maximum weight: 160 kg without PC Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: ready for operation (used), Year of construction: 2005, X-axis: 505mm, y-axis: 405mm, z-axis: 405mm, number of M8 threaded holes: 9, max. workpiece height: 545mm, max. table load: 180kg, accuracy: ISO 10360-2, resolution: 0.1µm, guide system: air bearings on all axes, traverse speed CNC mode: 8-300mm/s (max. 520mm/s), joystick rapid traverse: max. 80mm/s, slow: 0.05mm/s, measuring speed: 1-8mm/s (CNC), acceleration: 0.13g (max. 0.23g), measuring table material: granite, table dimensions: 638x860mm, compressed air consumption: approx. 50l/min at 0.4MPa, length: 1122mm, width: 1082mm, height: 2185mm, weight (incl. table and control): 515kg. An on-site inspection is possible. Gbsdpjy Duq Eefx Al Uju

Condition: excellent (used), Blanco food serving counter with glass display Blanco food serving counter with refrigerated display 40 mm Bianco Berrocal granite countertop Front panel with beech veneer Tray/plate slide Power connection: 230 V with lighting Dimensions: Width: 254 cm Depth: 80 cm Depth with plate slide: 110 cm Height: 190 cm Information about cooling: Without compressor unit/refrigeration unit Centrally cooled for connection to an external refrigeration system Last inspection: 09.2022 You can find more food serving counters – new and used – in our shop! International shipping costs available upon request! Gbodpfx Aloi Tvqhs Usu

Condition: used, functionality: unexamined, measuring range X-axis: 1,970 mm, measuring range Y-axis: 1,470 mm, measuring range Z-axis: 1,220 mm, CNC portal measuring machine LK, model G 80 Granite worktable dimensions: 3490 x 2080 x 500 mm Travel in X-axis: 1970 mm Travel in Y-axis: 1470 mm Travel in Z-axis: 1220 mm Year of manufacture: 1987, put into operation: 1991 Gbjdpfjgbdy Rex Al Uju Includes Renishaw measuring system Special export price: €4,500