Used Granulators for sale (720)

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Djdpsza Ahcsfx Ak Askw Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling - Fully hinged, dust-tight lid Djdpfx Akezxq U Ho Aokw - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Year of construction: 2023, condition: excellent (used), meant working condition, 6m pipe shredder with granulator and double bag stand shredder motor 37kw x2, granulator motor 90kw output capacity 700-800kg p/h Djdpfx Akez Ektyj Aokw

Condition: good (used), Year of construction: 2010, Item: Disintegration mill Type: Tyre shredder Input material: Car tyres, sports flooring Required particle size: Pre-shredded to max. hand size / < 100 mm see PDF Dkjdpfxjx U Dvlo Ak Asw

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Dkjdozb Dp Ropfx Ak Aow Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Condition: used, Year of construction: 2022, functionality: fully functional, Complete set of equipment for foam production and converting – HYMA and supplementary equipment Offer description For sale is a comprehensive set of machines and equipment for the production, processing, and converting of foams, including equipment for foaming, granulation, storage, sheeting, processing of cylindrical blocks, and precision cutting. The offer includes machines from renowned manufacturers, including HYMA, as well as auxiliary and installation equipment. The set allows for the implementation of many stages of the technological process – from foaming and material processing to its treatment and cutting. Most of the equipment dates from 2021–2022. The offer also includes an unused steam generator and an unused prepolymer tank. 1. Equipment for production and material preparation 1.1 HYMA BFH-15 foaming line (2021) Three foaming stations: - two stations for rectangular blocks with dimensions 2080 × 1080 mm and 2080 × 1580 mm, - one station for cylindrical blocks with a diameter of 1400 mm and a maximum height of 2100 mm. Two-screw mixer with a volume of 15 m³. Maximum foam density: 300 kg/m³. 1.2 HYMA GMK-80 granulator (2021) Main motor power: 55 kW. Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 1000 kg/h with a 25 mm screen. Conveyor fan: 15 kW. Loading belt conveyor: 1 kW. 1.3 HYMA GMP-75 granulator (2021): Motor power: 75 HP (approx. 55 kW). Interchangeable screens: Ø 5, 10, 20 and 25 mm. Output: approx. 500 kg/h. 1.4 HYMA GFH-330/7 silo (2021) Capacity: 45 m³. Height: 5300 mm. Diameter: 3300 mm. Dkjdpfe Agwbaex Ak Aew 2. Equipment for sheeting and processing of foam blocks 2.1 HYMA SSB precision sheeting machine for single blocks (2021) Maximum sheeting height: 105 cm. Maximum foam density: 250 kg/m³. HYMA SCH-700 carousel sheeting machine (2021) 2.2 Carousel structure for sheeting foam blocks. Table diameter: 7000 mm. 2.3 HYMA RH drilling machine for cylindrical blocks (2021) Equipment for drilling cylindrical foam blocks. 2.4 HYMA RSS-220 machine for trimming cylindrical blocks (2021) Equipment for trimming and processing cylindrical foam blocks. 3. PTV WJ2116-1Z-Dynamite CNC waterjet cutter (2022) Cutting with a pure water jet, without the addition of abrasive material. "Dry" work tank. Interchangeable tables. Working area: 2100 × 1600 mm. 4. Auxiliary and installation equipment 4.1 CERTUSS Universal 850 TC steam generator (2022) Nominal steam output: approx. 850 kg/h. Thermal power: approx. 558 kW. Includes a water treatment station. Status: unused. 4.2 Prepolymer tank (2022) Nominal capacity: 20 m³. Status: unused. Summary The offer includes 11 items of equipment and production equipment, intended for use in a plant that manufactures and processes foams. The set may be of interest to manufacturers planning to expand existing production capacity, start a new plant, or acquire equipment for subsequent stages of the technological process. Year of equipment production: 2021–2022. Sale: preferably as a complete equipment package. The possibility of purchasing individual equipment requires agreement with the seller. Detailed information regarding the technical condition, availability, location, and terms of sale will be provided to interested buyers.

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. It features a robust construction, a proven VEM 7.5 kW motor, and a three-phase 400 V power supply. The machine has a large feed hopper, convenient service access, and a control cabinet with an emergency stop button. The installed low-speed three-phase motor provides high shredding power while maintaining stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm Dkjdpfx Akez Sk Duj Ajw • Performance suitable for medium and large injection molding machines • German quality • Robust frame and blade construction In very good condition, mechanically inspected, and ready for operation.

Condition: used, Colortronic Dry-Flex Granulate Dryer, Plastic Dryer, M400 For sale is a used granulate dryer, type Dry-Flex M400, from the manufacturer Colortronic. Technical details (according to the nameplate): - Manufacturer: Colortronic, Friedrichsdorf (Germany) - Model: Dry-Flex M400 - Year of manufacture: 11/2012 - Control panel: 6AV6642-0BA01-1AX1 - Operating voltage: 400 V / 50 Hz - Heating power: 33 kW - Drive power: 5.5 kW - Operating pressure: max. 6 bar - Design: Granulate dryer / Plastic dryer - Application area: Plastic processing, injection molding, extrusion - Condition: Used, functional Buy Colortronic Dry-Flex M400 granulate dryer and other items at a favorable price – Here you buy products from a professional for professionals – You will find more attractive offers in our SHOP. You can find more items – new and used – in our shop! International shipping costs available upon request! Dkedpfjxlqztjx Ak Aew

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 06 00003 00112, screw diameter: 65 mm, TECHNICAL DETAILS Screw diameter: 65 mm Process length: total 40 L/D, divided into 24D + 16D Extruder drive according to datasheet: 45 kW MACHINE DETAILS Operating voltage: 3 × 400 V, 50 Hz AC control voltage: 230 V, 50 Hz DC control voltage: 24 V Rated current: 130 A Total power: 65 kW Maximum pre-fuse: 160 A Dosing speed: 102 rpm Dksdpfs Ah Ei Nex Ak Ajw EQUIPMENT Single-screw extruder including the control system mounted on the frame and a die. Note: The machine is sold without a melt filter, water bath, and strand granulator.

Year of construction: 2020, operating hours: 2 h, condition: good (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Dksdpfx Akjzhifio Aow Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: good (used), Year of construction: 1993, SHEER Granulator Regretfully, Dodpfx Akoip N Unj Ajkw 5.5 kW motor 1 new milling cutter available as an option: €4,000

Condition: used, No. 04554 Granulator / cutting mill Alpine RO 40/63 Used Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Dodsz Iav Aspfx Ak Aekw Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 1984, functionality: fully functional, Used granulate classifier Fully functional Year of manufacture: 1984 Dkodpfx Akjw Nfizj Aow

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Dodpfeufi Rxsx Ak Aokw Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: used, Year of construction: 2006, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V configuration. Technical specifications: Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Rotating knives: 5 rows arranged in a V configuration Power supply: 400 V, three-phase, 50 Hz Dksdpfx Aksz Hmtxo Aow CE marking + includes Blower

Year of construction: 2006, condition: used, RAPID GK6090-KU Plastic Granulator – 75 kW Industrial knife granulator manufactured by RAPID GRANULATOR AB, Sweden, in 2006. Equipped with a 75 kW main motor and a V-cut rotor with five rows of rotating knives arranged in a V-shaped configuration. Technical specifications: Manufacturer: RAPID GRANULATOR AB Model: GK6090-KU Year of manufacture: 2006 Serial number: 81725.001 Main motor power: 75 kW Rotor diameter: 600 mm Rotor width: 900 mm Cutting system: V-cut Rotating knives: 5 rows arranged in a V-shaped configuration Power supply: 400 V, three-phase, 50 Hz CE marking + includes Blower Dsdpfx Akez Hmptj Askw

Condition: used, Labotek Type: FMD-M-M-15-15-V, Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of systems for material drying, dosing, and conveying in the plastics industry. Dodpszii Dbofx Ak Askw The FMD-M series includes modular dryers designed for processing plastic granules. Technical specifications of the FMD-M series: Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volts: 3x400 Vac+PE Amps: 10.4 Amps Overcurrent protection: 16 Amps kW: 2.6 kW HZ: 50/60HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed medium: Free-flowing, granular raw material (minimum grain size of 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1975, Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Rotor dimensions: length 44 cm / diameter 13 cm Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available. Dsdpfx Akex R Av No Askw

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader Dksdpfx Asy R S Twsk Asw -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Dkodpora N A Nofx Ak Aow Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: good (used), Year of construction: 1974, This mixer was designed for intensive mixing and wet granulation of materials such as powder / granulate. Dksdewa Tcfjpfx Ak Aow Working volume: 63 - 200 liters Total volume: 250 liters Cutter head: 4.9 / 6 kW, speed 1,500 / 3,000 min¹ Mixing tool: 18,5 kW, speed 2 speeds Manufacturer: Lödige Year of construction: 1974 Floor Space: 200 x 110 x 145 cm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our FORMAT4 tempora F400 45.03 L edge banding machine from Felder, used in our furniture workshop. The machine was purchased in 2019. The equipment includes joint milling, trimming, flush trimming and radius milling, corner processing, as well as radius and surface scraping blades and polishing units. PERFORMANCE DATA According to the total counter of the machine control system, as of October 30, 2026: • Piece counter: 24,696 • Total edge length processed: 22,186.4 m • Operating time of chain conveyor: 415 hours 58 minutes • Operating time of main switch: 4,996 hours 3 minutes The counter readings are documented in the attached display photo. The operating time of the main switch is shown separately from the actual operating time of the chain conveyor. EQUIPMENT Dedpfxj Ahmv Ae Ak Ajkw • m-motion control system with a 10-inch smartouch touchscreen • Jointing unit with plunge-controlled diamond cutters • Teflon-coated gluing unit for 1.5 kg of EVA granules with synchronized gluing roller • Pneumatically controlled pressure unit • Guillotine shear for roll edge material from 0.4 to 3 mm • Miter saw unit with 0°/10° cutting selection • Upper and lower flush trimming and radius milling units with manual adjustment • Corner processing unit for post-forming and softforming profiles • Radius scraping blades, top and bottom • Surface scraping blades, top and bottom • Polishing units, top and bottom • Release agent spray device • Extendable workpiece support • Edge magazine with rotary table, diameter 740 mm TECHNICAL DATA • Workpiece height: 8–45 mm • Roll edge thickness: 0.4–3 mm • Feed rate: 9 m/min • Minimum workpiece length: 140 mm • During corner processing: workpiece height 10–45 mm and minimum workpiece length 270 mm • Jointing depth, manually adjustable: 0–2 mm • Electrical connection: 400 V / 50 Hz INSPECTION AND PICKUP Location: Neuwied. Inspection by appointment only. Pickup only. Transportation and loading must be arranged in advance.

Condition: excellent (used), GRANULATE DUST REMOVAL Dksdpfx Aoy N R Nbok Aew We have 5 units available from a company liquidation. Granulate dust removal machines reliably eliminate quality risks such as streaks and cloud formation on visible surfaces. The granulate dust remover efficiently removes fine dust and ensures clean, high-quality plastic granulate. This reduces rejects, prevents production disruptions, and ensures consistently high product quality. Ideally, I would prefer if you already had such a device in use, as I only deal with the elimination of injection molding defects and am not familiar with the machines themselves.

Condition: excellent (used), For sale: a Rapid 1514 shredding mill from the Range 15 series. The machine has been inspected and is in working order. It is suitable for shredding appropriately selected materials, including plastic waste. The unit features a feed hopper, a cutting chamber with blades, an electric motor, and a control panel with an emergency stop switch. The photos also show the interior of the working chamber. Dkodpsz Spffjfx Ak Ajw Data from the nameplate: - Manufacturer: Maskin AB Rapid, Sweden - Type: 1514 - Series: Range 15 - Year of manufacture: 1994 - Machine number: 260319 The machine is used and shows signs of wear, which can be seen in the photos. The condition and scope of equipment are shown in the photographs.

Year of construction: 2024, condition: new, functionality: fully functional, TECHNICAL DATA • Designed for beside the press operation (injection and blow moulding). • Six standard models, over 50 versions available. • Two rotor design available. • Slow rotor speed (155-275 RPM). • Standard screen in stainless steel. • IP55 control cabinet and electrical motor. Djdpfoz Sqc Aox Ak Ajkw • Quick opening and easy cleaning. • Noise level largely within European norms EN 12012-1. Utmost application flexibility CMG launches a new series of small size beside the press granulators with connotates of high caliber. The very innovative and unique attributes of such new series are several and all contribute to obtaining the highest degree of productivity, regrind quality (homogeneous particle dimensions and absence of dust), efficiency of operation and the best application flexibility. In its standard configuration the G17 granulators are applicable to processes of injection moulding and of blow moulding. In the ET1 or ET2 configuration, they are suitable for extrusion applications. The granulation capacitiy range is from 5 kg/h up to 90 kg/h. Precision cutting The new CMG series of G17 granulators is designed to obtain the most homogeneous regrind shape and dimensions, along with little to no presence of dust. One additional very unique benefit of this new line is the ability to produce regrind with very small dimensions. The great advantage of dimensionally small regrind is the possibility to add higher percentages to the virgin material with no influence to the quality of the finished product. Small capacity systems, injection moulding machines or extruders, are equipped with small diameter plastification screws, unable to process granules with dimensions exceeding those of the virgin granule. The G17 granulators produce rigrind which is dimensionally comparable to the virgin pellet.