Used Gross Knives for sale (37)

Condition: used, Year of construction: 1997, functionality: fully functional, Gross GAZ 62 shredder. factory refurbished in 2025. Data: Opening: 620X1100 mm. Rotordiameter: Ø248 mm. RPM: 60-120. Ppedjyvt Hvspfx Ab Uep 18,5 kW. 400V, 50 hz. Rotorlenght: 620 mm. Screen: 50 mm. Number of knifes: 28. CE. Made in Germany. We ship all over EU.

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet Podpfxsdz Spws Ab Ujpp For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: ready for operation (used), Year of construction: 2007, Fully functional single-shaft wood shredder - currently in operation in our factory. Including electrical control system (PLC), switch cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Technical data Rotor working length: 1,500 mm Rotor diameter: 485 mm Motor: 55 KW Rotor speed: 100 RPM Ppjdpfxsra Ex Ej Ab Uep Rotor knives: 76 pieces concave / 35x35 mm 4-fold rotating cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg Further details on request. Errors and omissions excepted.

Year of construction: 1982, condition: used, Cylindroconical 580 hl fermentation and storage tank - glycol cooling, 4 cooling zones (1 x cone, 3 x cylinder) - swivel cone - stainless steel - insulated - support skirt Additional title: Outdoor tanks Capacity: 580 hl Operating pressure: 2 bar Operating temperature: 20 °C Cooling area: 29 m2 1 x cone cooling; 3 x side-wall cooling Material: stainless steel Position: vertical Base construction: Short skirt support Ppjdpfx Abevcq A As Usp Features: Tank cooling; swivel conus; insulation; frame; outlet DN100; CIP connection; 2 x temperature sensor; sample valve

Year of construction: 1995, condition: used, Stainless steel tank. - glycol cooling, 1 x side wall cooling jacket - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve Additional title: Outdoor tank for storing fluids Capacity: 744 hl Operating pressure: 0,9 bar Width: 12,55 m Height: 3,27 m Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement Psdpfx Aevcqdyjb Uepp

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Ppsdjvcqynspfx Ab Ujp Total height/tank: 7360 mm Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Podpfx Absvcqnle Uspp Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: used, Year of construction: 2001, Insulated, cylindroconical stainless steel tanks with two frame cooling zones and cone cooling. Most recently used as a beer fermentation tank with a usable volume of 150 hl. Additional title: vertical, coolable, insulated stainless steel pressure tanks Gross volume: 19040 l Pressure capacity: 2 bar Max. operating temperature: 40 °C Cooling area: 8,4 m2 Length: 2,53 m Width: 2,53 m Ppjdpfx Abovu Tvie Ujp Height: 6,54 m Weight: 2300 kg Material: stainless steel Position: standing frame Features: insulation, tank fittings

Condition: used, Year of construction: 2007, used, in top condition, overhauled Rotor shaft seats completely overhauled Rotor flange bearing new Gear sleeve bush new Manufacturer: Gross Type: GAZ 62 E Year of manufacture: 2007 Machine no.: H 3061/62 E Motor: 18.5 kW Slow-speed with hydraulic moving floor Hopper opening: 600 x 800 mm Cutting width: 600 mm Extraction connection D 160 mm Space required approx. 1800 x 1200 x 1600 mm Pedpfx Aboythcxo Uopp Weight approx. 1300 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, function tested without refurbishment, without warranty or guarantee

Condition: used, tank capacity: 69,000 l, 69,000 liter pressure vessel made of V2A stainless steel Ppjdpfx Ajyfwrgsb Uop

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GHZ 600 Factory overhauled, V-rotor Feed width: 300 mm Maximum feed height: 70 mm Working width of rotor: 300 mm Rotor diameter: 252 mm Rotor speed: 600 rpm Cutting system: 14 knives, 40 x 40 mm Screen perforation: 25 mm Control cabinet: fully wired, incl. 5 m cable Motor output: 18.5 kW Electrical connection: 400 V +/- 5% / 50 Hz Extraction port Ø: 200 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: • PLC electrical control (Moeller / Siemens); star-delta starting • Load-dependent material feed via top-mounted feed roller • Machine frame on anti-vibration rubber mounts • Patented V-rotor with milled knife pockets in the profile • Welded knife carriers and bolted knives with recessed knife screws Ppsdpfx Aeymb Ubeb Ujp • Machine prepped for on-site extraction system (extraction port Ø 200 mm)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GAZ 62 with G-Rotor Ppedpfx Abex Eb Tme Uop Factory overhauled, new wear parts Feeding opening: 620 x 820 mm Hopper volume: 0.65 m³ Rotor diameter: 248 mm Rotor working width: 600 mm Rotor speed: 80 rpm Cutting system: spiral rotor; 26 knives, 30 x 30 mm Screen perforation: 10 mm or as required Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Hydraulic motor: 0.75 kW Connection power: 400 V +/- 5% / 50 Hz Suction nozzle diameter: 160 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Including: - Automatic star-delta start - Automatic shut-off in idle mode - Vibration-damping machine feet

Condition: used, Year of construction: 2000, tank capacity: 11,100 l, GENERAL Features: Discharge tap, crane lugs Design: vertical Year of manufacture: 2000 Notes: Manufactured according to DIN 6618; piping inside the vessel; base stand made of 1.4301 (V2A); manhole cover made of 1.4541 (V2A); discharge with bolted reducer Internal diameter: 1,980 mm Total height: 4,750 mm Max. overpressure: 0.3 bar Location: Bremen Technical documentation: acceptance certificate Nameplate: Vacuum: 0.1 bar Volume: 11,100 litres Cylinder wall thickness: 3.0 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 3,000 mm Last use: solvent VESSEL Heads: dished ends (Klöpper heads) Support type: skirt EQUIPMENT Manhole / dome: on top head (DN 600) Pedpfx Aoycllijb Uspp Outlet: flange DN50 TECHNICAL DATA / DIMENSIONS Head wall thickness: 3.9 mm

Condition: used, tank capacity: 70,800 l, GENERAL Design: horizontal Remarks: Manhole approximately 350 x 450 mm on the front bottom; one tank (9540-1) with a small dent under the bearing shell, one tank (9540-2) without a nameplate; up to 4 additional identical tanks can be made available upon request. The following saddle supports can be purchased separately for the tank: Ppedjyckn Nopfx Ab Uep Total width: 3,000 mm Total height: 3,000 mm Total length: 10,500 mm Location: external storage Nameplate: Volume: 70,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: water TANK Ends: Torispherical heads Base type: Saddles EQUIPMENT Outlet: available

Condition: good (used), Year of construction: 2018, operating hours: 1,011 h, functionality: fully functional, Shredder GROSS, Model GAZ 82 S, Year of manufacture: 2018 Technical Data: Manufacturer: GROSS Apparatebau Model: GAZ 82 S Year of manufacture: 2018 Operating hours: 1,011 Drive power: 37 kW Feed opening: 800 x 1,200 mm Ppsdex Uz N Aepfx Ab Uep Hopper volume: 1 m³ Rotor diameter: 368 mm Rotor length: 800 mm Rotor speed: 60–120 rpm Extraction port diameter: 200 mm Dimensions: approx. 2,100 x 1,700 x 1,750 mm (LxWxH) Weight: approx. 2,500 kg Material: Wood, cardboard, plastic Accessories: Hopper Note: The shredder is in good condition. It has been inspected and tested at our location in 28816 Stuhr. A video is available on our website or YouTube channel. Viewing, including powered demonstrations, is possible by prior arrangement at any time. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of this information or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewing by appointment only. Sale is ex works with prepayment, without warranty or guarantee.

Condition: excellent (used), Gross Gaz 102 shredder/chipper 22 kW motor, rotor length 1020 mm, 50 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, loading hopper inlet 1020 x 1500 mm Ppedpfxeylav Uo Ab Uop The machine is in very good condition and fully performs its functions.

Condition: used, Gross GP 80 briquetting press Motor power: 7.5 kW, Briquette diameter: 60 mm, Hopper dimensions: 145 x 145 cm Ppsdpfx Ajxpgyasb Usp Weight: 1200 kg Year of manufacture: 2016

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Ppsdpfsu Nlkxsx Ab Uop

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 Podpfx Asyhzq Ajb Uopp 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: used, tank capacity: 750 l, GENERAL Design: vertical Remarks: Top head made from 1.4541 (V2A); metallic discolorations inside the vessel; manhole in the top head with 350 mm diameter External diameter: 900 mm Internal diameter: 790 mm Total height: 2,150 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.50 bar Support type: height-adjustable legs Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 750 liters Double jacket volume: 80.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,230 mm Previous application: pharmaceutical industry VESSEL Ppsdpfxsxqc I Ae Ab Usp Max. permissible operating temperature: 135 °C Number of legs: 3 pieces INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head Outlet: DN50 DIN 11851 Note: slight adhesions, pressure marks on the insulation jacket MATERIAL PROPERTIES Material of legs: stainless steel

Condition: new, Voltage: 400 V / 50 HzFeed opening: 600 x 800 mmHopper capacity: 0.6 m³Throughput: material and sieve-dependentRotor diameter: 252 mmRotor length: 600 mmRotor speed: 60 - 100 rpmMotor power: 18.5 kWCutting system: 28 knives 40x40 mm (incl. 2nd row of knives)Sieve perforation: 20/25 mmSuction nozzle: 160 mmDimensions: L = 1.800 mm, W =1,230 mmH = 1,640 mmWeight: approx. 1,300 kgincl.:- automatic star-delta start- electronic control cabinet, fully wired- automatic stop at idle- CE-compliant- GS mark "dust-tested"- vibration-damping machine feet- 2nd row of knives = 14 knives 40x40mm Psdpovyuphofx Ab Uspp

Condition: used, Year of construction: 2013, Price: On request - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Pedpfxewz Nxxj Ab Uspp Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. Podpjx Tp U Rjfx Ab Uopp GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition - available immediately

Condition: new, New and used briquetting presses. Do you need a briquette press? Contact us. We have many years of experience in machines for briquetting materials such as wood, biomass, paper and much more. We have more than 20 years of experience. Presses for round or rectangular briquettes. We ship alle over EU. Psdpfox S Ii Rjx Ab Ujpp Capacity from 20 to 400 kg. per hour.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overworked machine 37 kW Feed opening: 1200 x 1200 mm Rotor length: 1300 mm Rotor diameter: 348 mm Rotor for soft Wood Screen size: 20/25mm Tools: 60 knives: 35x35mm caro and 35x35mm concav Controlled by PLC Hydraulic tank size: 20 l fast hydraulic backwards Conveyor belt sector 400mm Ppedotxykfepfx Ab Uop Second row of knives