Used Guard for sale (3,594)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) Lsdjydil Nspfx Afuert 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: ready for operation (used), Year of construction: 1998, operating hours: 116,213 h, travel distance X-axis: 245 mm, travel distance Z-axis: 1,035 mm, controller manufacturer: MAZATROL, controller model: T-Plus, number of axes: 3, This 3-axis Mazak SQT-30M * 1000 turn-mill centre was manufactured in 1998. It features a maximum turning diameter of 410 mm and a turning length of 989 mm. The machine is equipped with a Mazatrol T-Plus control system and offers a spindle speed range of 35 - 3,300 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak SQT-30M * 1000 machine we have for sale. Contact us for further details. Ledpfx Afsz D Dfgjuert - Working Hours: 116,213 hours- Max. Swing Diameter: 560 mm- Max. Swing Over Carriage: 500 mm- Max. Turning Diameter: 410 mm- Standard Turning Diameter: 336 mm- Max. Turning Length: 989 mm- Max. Bar Capacity (Diameter): 77 mm- Main Spindle Speed Range: 35 - 3,300 rpm- Main Spindle Motor Power: 26 kW / 22 kW (30 min / 100% continuous)- Max. Spindle Torque: 637 Nm- Spindle Nose: A2-8"- Spindle Through-Hole: 88 mm- Chuck Diameter: 304 mm- C-Axis Indexing: 0° - 360° / 0.001°- Turret Positions: 12- Turning Tool Shank Size: 25 x 25 x 150 mm- Boring Bar Shank Diameter Range: 8 / 10 / 12 / 16 / 25 / 32 / 40 / 50 mm- Turret Indexing Time: approx. 2.2 s- Driven Tools Motor Power: 7.5 kW- Driven Tools Max. Torque: 96 Nm- Driven Tools Speed Range: 90 - 1,500 rpm- Driven Tools Drilling Capacity: 23 mm- Driven Tools Tapping Capacity: M16 (H-type holder) / M12 (V-type holder)- Driven Tools End Milling Capacity: 25 mm- X-Axis Travel: 245 mm- Z-Axis Travel: 1,035 mm- X-Axis Rapid Traverse: 18 m/min- Z-Axis Rapid Traverse: 24 m/min- C-Axis Rapid Traverse: 100 rpm- X/Z-Axis Feed Rate: 0 - 5,000 mm/min- C-Axis Feed Rate: 1° - 2,000°/min- Tailstock Quill Stroke: 130 mm- Tailstock Quill Diameter: 100 mm- Tailstock Taper: MK 4- Tailstock Travel: 880 mm- Coolant Tank Capacity: 250 l- Coolant Pump Flow Rate: approx. 20 l/min- Coolant Pump Pressure: 5 bar- Power Capacity: 52 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 100 l/min- Required Floor Space: approx. 7.7 m²- Machine Weight: approx. 9,500 kg- Additional Equipment & Accessories: Tool Eye (tool presetter), 3-jaw hydraulic chuck 304 mm with soft/hard jaws, chip/coolant guard enclosure, work light, synchronized tapping, driven tool holders (CAT40 3x vertical, 3x horizontal), boring bar holders, set of adjusting tools, foundation equipment Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, We offer this used OMAG MOD. CONF. DIVA-5 OMAG STICK PACKAGING MACHINE mod. DIVA/5, year of construction 2012. Model: MOD. CONF. DIVA-5 Serial number: 2298 Year of manufacture: 2012 Accident protection guards compliant with with CE norms. Required electric power: three phase 220/380 V, 50 60 Hz. Required compressed air: 6 Atm. Frame in welded steel and painted with epoxy resin paint. Colour code: RAL 9006 (OMAG standard). Lsdpfx Aex Rw Hvefuort If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2011, gebraucht 2011 010192 prompt, Zwischenverkauf v Deutschland 24100 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments) Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Lodpfx Asyxxyaefujrt Details:

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): Ledpfszuuimex Afusrt * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Lrsdpfxezdqdlo Afuot Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: used, mileage: 85,900 km, power: 315 kW (428.28 HP), first registration: 04/2016, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2016, total length: 7,300 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), Special equipment: Front axle load 9.0 t, trailer brake 2-line, audio system: CD radio (Bluetooth), exhaust pipe pointing downwards to the right, battery 220 Ah, batteries arranged one above the other, electrical pre-installation in the cab 24V / 100 A, suspension: front springs 10.5 t, 3 leaves, rear lights LED, rear axle differential 300, info display 12.7 cm with video function, interior filter for construction site vehicles, air intake from the front, air compressor 2-cylinder, engine PTO at the rear, pump SAE B, engine compartment encapsulation reinforced, oil cooler for transmission, auxiliary drive MB 131-2c, programmable special module, spare wheel, reversing warning system audible (warning signal outside), rear crossmember reinforced, protective plate under the main tank, circuit breaker, seats in the cab: driver's seat comfort suspension seat, seats in the cab: driver's seat backrest foldable, seats in the cab: center seat with safety belt, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on the front axle), stowage flap on the outside left, 12V socket in the passenger footwell, additional 24V socket in the passenger footwell, stone guard, preparation for reversing camera, seat belt warning system Ledpfx Ajz Ed Ahsfuert Additional equipment: Emission standard EURO 6, axle configuration: 4x2, trailer socket 24V / 15-pole, Arocs, exhaust pipe pointing outwards to the right, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, compressed air unit medium, cab: width 2.30 m, cab: cab entry movable, cab: tilting device hydraulic, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 170 mm, cab: mounting height 600 mm, suspension: leaf / leaf, suspension: rear springs 11.5 t, stiff, suspension: front springs 7.5 t, 3 leaves, power windows, windshield tinted, generator 100 A, gearbox 12-speed - type: G 230-12, urea tank (AdBlue): 60 L, hydraulic pump (Meiller pump - 5 pistons - 255 / 1), interior filter: pollen filter, body/structure: tipper, body variant: standard, comfort locking system, fuel tank: 290 L steel, left, power steering pump unregulated, air intake behind the cab, air dryer heated, engine 10.7 L - 315 kW R6 diesel (OM 470), engine brake, auxiliary drive MB 121-2c, wheelbase 3900 mm, ramp mirrors, waste heat recovery, disc brakes with full protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger multi-adjustable seat, stabilizer rear axle, stabilizer front axle, socket in the cab 24V, tachograph / EG control unit, underrun protection at the rear fixed, preparation for CB radio, preparation for toll collection, front axle straight, water pump regulated, permissible total weight 18.00 t, oil cooler for transmission 2x trailer coupling Meiller tipper body Chain spreaders Mounting plate Municipal hydraulics Loading crane "HMF" with remote control Errors, typos and prior sale reserved Inspection only possible by prior appointment

Condition: used, machine/vehicle number: 26446, Year of construction: 2009, operating hours: 19,664 h, load capacity: 5,000 kg, lifting height: 4,400 mm, fuel type: diesel, mast type: simplex, construction height: 3,070 mm, Equipment: cabin, sideshift, .: 26446 Device details: Year of manufacture: 2009 Load capacity: 5000 kg Lifting height: 4400 mm Recorded operating hours: 19664 h Mast type: Standard Mast height: 3070 mm Length/Width/Height: 4100 / 1500 / 2450 mm Operating weight: 6740 kg ---- Equipment: * Overhead guard * 3rd valve Lrjdpfx Aoylnhlsfujt * Full cabin * Work lights (front) * Work lights (rear) ----- Attachments: * Side shifter ---- Additional device information: Flashing light The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We would also be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Subject to prior sale and errors for this offer. In dealer sales, the device is sold in its current condition, without refurbishment. All information without guarantee, subject to errors and changes.

Condition: reconditioned (used), Year of construction: 2023, operating hours: 36 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) 2023 model year; 36 hours of operation 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger simplifies daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and a new suction hose New suction motor ensures high water pickup performance from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah gel batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush Ljdpfx Aez Eh R Nsfuert NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: used, functionality: unexamined, machine/vehicle number: 68191, grinding length: 800 mm, type of input current: three-phase, input voltage: 400 V, Okamoto ACC-84DX surface grinding machine. Serial no. 68191, connection 3 x 400 V, 50 Hz, 8.5 kVA. Grinding length 800 mm. Magnetic clamping table, coolant supply with shut-off valve, splash guard, control panel with two digital displays, handwheel and fine feed adjustment. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee. Ledpsz A Ulhjfx Afusrt

Condition: used, machine/vehicle number: E11401004015, Year of construction: 2019, operating hours: 3,410 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 10,000 kg Lifting height: 3,500 mm Fork length: 1,200 mm Fork cross-section: 145 x 90 mm Fork radius: 105 mm Fork adjustment range: 0 to 1,980 mm MACHINE DETAILS Drive type: Diesel Number of wheels: 6 Dimensions & Weight Dimensions: 5,600 x 2,550 x 3,155 mm Weight: 17,510 kg Overhead guard height: 3,000 mm UVV certificate valid until: 08/2027 Starter batteries replaced: 01/2025 Operating hours: 3,410 h EQUIPMENT 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Full cabin Air conditioning Lodpfxszz Hlts Afuert Heater Windshield wiper Multi-function display with touch function LED work lights (front) LED work lights (rear) Road traffic lighting with turn signals Additional work lights Rotating beacon Safety light (rear) Motec camera with a view of the fork tip (currently not functioning) Air-suspended comfort seat Comfort seat can be swivelled 17° to the right If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible using a large forklift truck available on-site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior arrangement is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for late collection. Any outstanding storage fees must be paid in full before collection. Lot number: 1

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 22100 € 1 320 mm Lredpfeyxxygox Afust 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 17900 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call Ljdpfxeyycwxs Afuort • RISK-FREE PURCHASE: 14-day return policy Details:

Year of construction: 2014, condition: excellent (used), functionality: fully functional, HSM roll cutting saw with dust collector and acoustic guard. TYPE: RT650/2800 Year of manufacture: 2014 Voltage 230 / 400 V - 50Hz Power 17kW Rolls diameters: 300 - 650 mm Roll widths: 1270 - 2750mm Machine dimensions LxWxH: 4690 x 2100 x 3000mm Lrodpfxet N T A Is Afust Weight: 5.5 tons

Condition: reconditioned (used), Year of construction: 2010, operating hours: 1,979 h, functionality: fully functional, working width: 750 mm, area performance: 3,700 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, HAKO HAKOMATIC B90 TB750 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2010 with 1979 hours of operation 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 750 Suction nozzle working width (mm): 1100 Theoretical capacity (m²/h): 3700 Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW BATTERIES 6V 175Ah SIAP GEL BATTERY (4x) NEW 24V 500W suction turbine NEW 380mm PPL 0.5 disc brushes (2x) NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger Lsdsy Iyagspfx Afusrt 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 85 liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B Lrsdoztyrqspfx Afuot

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Year: 2015 According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine Lsdpey Ir Hrofx Afujrt - Triplex mast with full free lift - Side shifter - Load guard - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Year 2016 Control FANUC 31i-B Table size 700 x 1400 mm Table load 1800 kg Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Lsdpfx Aozzymksfuert Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, machine/vehicle number: 5961, functionality: fully functional, power: 1.3 kW (1.77 HP), input voltage: 400 V, height adjustment type: mechanical, rotational speed (max.): 2,250 rpm, rotational speed (min.): 80 rpm, total width: 600 mm, total length: 1,000 mm, total height: 1,800 mm, throat depth: 293 mm, table width: 420 mm, table length: 300 mm, overall weight: 280 kg, Equipment: rotational speed infinitely variable, ALZMETALL AX 3 SV Pillar Drill Technical data / Features: Manufacturer: ALZMETALL Type: AX 3 SV Serial number: 5961 Spindle taper: MK 3 Spindle travel: 120 mm Overhang: 293 mm Table size: 420 x 300 mm Column diameter: 110 mm Continuously variable speed control 80 - 2250 rpm (in 2 gear stages + 2 motor stages) Automatic quill feed: 0.1 / 0.2 mm/rev Electrically monitored spindle guard Emergency stop button Ljdpfszi A Nkjx Afuert Quick-change drill chuck Weight: approx. 280 kg Space requirement: 1000 x 600 x 1800 mm (L x W x H) Technical data subject to change without notice.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 750 mm, Hartford Pro 1000 – Vertical Machining Center (2006) For sale: A well-maintained Hartford Pro 1000 vertical machining center from 2006. The machine has seen only light production use and has been serviced on a regular basis. Ideal for precision machining, prototyping, and small to medium batch production. Technical Specifications Year of manufacture: 2006 X-axis travel: 1,000 mm Y-axis travel: 600 mm Hpebsx Dx Hnomt Dty Aea Z-axis travel: 630 mm Table size: 1,200 × 600 mm Spindle speed: 8,000 rpm (BT40 taper) Tool changer: 24 stations CNC control: FANUC HARTROL AI300 Spindle motor power: approx. 11–15 kW Machine weight: approx. 6,000–6,500 kg Cooling system: Flood coolant, through-spindle coolant, coolant tank with pump Condition • All axes move smoothly without abnormal noise • Spindle operates properly with no overheating • Control electronics are fully functional Lrodpfx Aex Dx Hnjfuet • Regular maintenance performed; filters changed routinely • Machine available for trial machining Included Equipment • Optional BT40 toolholders (subject to separate agreement) • Chip conveyor • Coolant tank with pump • Work lights, full guarding, documentation/manuals Availability & Logistics The machine is available for immediate delivery and is ready for loading. Transport, loading, installation, and commissioning can be arranged within Finland or internationally. The listing was translated automatically. Translation errors are possible.

Condition: used, Year of construction: 1991, Used Machine Year of manufacture: 1991 Ljdozk Npyspfx Afujrt Condition: overhauled; the photos show the machine before it was overhauled. Features and Technical Specifications: - Designed for all window tooling systems with tool diameters up to 400 mm - Thanks to the standard braking systems (foot brake for the slotted spindle, automatic electronic safety brake for the saw), the machine can be brought to a stop in just a few seconds - The protective covers for the slotted spindle and crosscut saw are designed so that the tools can be easily and conveniently without having to remove the guards themselves - The crosscut saw can be conveniently adjusted from the workstation using a quick-adjustment mechanism. A six-position turret head allows for quick adjustment to different dimensions - The height of the 40 mm slotted spindle can be precisely adjusted using an easily accessible handwheel with 0.1 mm graduations - The sturdy roller table, in combination with hardened and ground guides, can be moved easily with minimal effort - Slotted spindle motor: 5.5 kW - Slotted spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slotted spindle height adjustment: 100 mm - Exhaust port: 120 mm - Crosscut saw motor: 2.2 kW - Cutting-off saw speed: 2950 rpm - Saw blade shank: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo LAS stop - Weight: approx. 600 kg Current photos coming soon! Availability: Immediate Location: Röllbach

Condition: used, Year of construction: 2022, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850 x 2300 x 2260CNC Guillotine Shear DENER AS 3013 – Young Machine Ex Works – including loading onto truck For sale is a very young CNC guillotine shear DENER  AS 3013. The machine is in very good condition and is being sold due to a factory closure. The price already includes: - Loading onto truck - Immediate availability by arrangement (Location St. Pölten)  The machine can be inspected  by prior appointment. If you are interested or have any questions, please do not hesitate to contact us. Technical Data Sheet thickness: 13 mm Cutting length: 3,040 mm Cutting angle: 0.5–3° Number of hold-downs: 16 Back gauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5–3°): 17–8 cuts/min Throat depth: 350 mm Oil tank: 400 litres Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Lredpfx Aszw Rv Uefujt Weight: 13,400 kg Equipment- Swing beam design - CNC control for:- Back gauge - Cutting angle - Cutting gap - Cutting length - Ball screws for the back gauge - Ball transfers in the table - 2 × support arms, 1,000 mm - Cutting line illumination - Foldable finger guard up to 1,000 mm Including pneumatic sheet metal support system!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator Ledpjyyzxhsfx Afujrt - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Ledpozz Afiefx Afusrt Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 4514927-4514928, Printed manuals are available both for the SLAU 80-60 shrink wrapper and the TR 65-150 shrink tunnel. Automatic “L” sealer packaging machine, brand ULMA, model SLAU, equipped with a shrink tunnel, designed for packaging all types of products using either shrink film or non-shrink film, reaching outputs of up to 45 cycles/min. Highly versatile machine: its simple adjustment systems allow for rapid adaptation to different products to be packaged. Produces seamless packages on both the top and bottom of the product, ensuring high product visibility, whether shrink wrapping is applied or not. The SLAU was specifically designed to facilitate frequent size/format changes, and therefore features systems that enable all changes to be carried out easily and quickly, with no need for additional tools. Automatic in-line feeding via conveyor belt, featuring product separation and alignment, as well as manual belt width adjustment. Motorized 90° film reel holder, with mechanical perforation system and end-of-film detection. Manually adjustable former triangle height. Horizontal and vertical photocells for product detection. Three film sealing and cutting options: STD: by nichrome wire, OPC: knife or hot bar for PE films. The latter two feature electronic temperature control. Jaw opening adjustment by pneumatic actuator in three positions, increasing output with low-profile products. Sealing die equipped with safety end-pieces to prevent products from getting stuck should obstacles be encountered along the path. Belt closure system facilitates the transfer of small and/or unstable products. Sealing center alignment via jaw height adjustment. Easy-access automatic film waste rewinder with film break detector. Function and parameter control and adjustment via programmable PC. Sturdy frame built from painted welded steel tubing. Fitted with wheels and adjustable feet for transport and positioning. Right-to-left machine version. Easy integration into existing production lines. Full accessibility to all components. Ventilated electrical cabinet. Guards and safety systems compliant with CE regulations. Available in both painted and stainless steel versions. Lredpfx Aeykqhfofuot --- ULMA TR 65-150 hot air tunnel, designed for film shrink-wrapping of products discharged from side-seal wrappers, bundlers, flow packers, overlap, and other types of packaging machines. High thermal efficiency tunnel, low consumption, and minimal heat loss. Robust frame built from painted rolled steel. Easily integrated into existing production lines. Fitted with wheels and adjustable-height feet. Right-to-left working direction. Electronic adjustment of temperature and conveyor speed. Homogeneous distribution system of hot air flow inside the chamber to ensure significant energy savings. Maximum insulation minimizes heat loss.