Used Guide Fence for sale (5,515)

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Ledpfoxy Tm Iox Ahaoah

Condition: ready for operation (used), Year of construction: 2024, pressing force: 64 t, CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details. • Inspection possible: Yes, in Bulgaria • CNC control • Control system: E-Touch ET18 (E-Touch 18) • Programming: 2D graphical programming, CAD import, offline programming • Remote assistance: Yes • Automatic bending-process calculation: Yes • CNC axes: 4+1 (Y1, Y2, X, R + V motorized crowning) • Main technical specifications • Distance between columns: 1,980 mm • Throat depth: 300 mm • Ram stroke: 160 mm • Maximum open height: 370 mm • Repositioning accuracy: ±0.05 mm • Fast approach speed: 200 mm/s • Bending speed: 10 mm/s • Return speed: 180 mm/s • Main motor power: 7.5 kW • Axes / backgauge • Y1/Y2: Fully synchronized • X-axis: CNC controlled • R-axis: CNC controlled • V-axis: CNC motorized crowning • Backgauge: Servo controlled • Main components • Hydraulic system: Bosch Rexroth • Main motor: Siemens • Electrical components: Schneider Electric • Ball screws / linear guides: HIWIN • Linear scales: GIVI (Italy) • Tubing / connectors: EMB (Germany) • Sealing rings: NOK (Japan) • Hydraulic pump: Sunny (USA) • Safety and compliance • Motor overload protection • Electrical leakage protection • CE safety standard Additional equipment • 1 set upper punch (heat-treated 42CrMo) • 1 multi-V lower die (heat-treated 42CrMo) • Quick-release upper tool clamps • 2 front support arms • Foot pedal with emergency stop • Safety fence Technical Specification Ljdpfszu Swnox Ahaoah Bending Length 2500 mm

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Ledpfozuyx Hjx Ahajah Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Saw band length: 4,700 mm Tool dimensions: 13 × 0.65 × 24 TPI Guide roller diameter: 630 mm Cutting height: 350 mm Cutting width without rip fence: approx. 610 mm Cutting width with rip fence: 150 mm Loading height: 1,065 mm Cutting speed: 10–100 m/min Table travel: approx. 600 mm Table feed rate: 0.03–0.3 m/min MACHINE DETAILS Dust extraction connection diameter: 1 × Ø 120 mm + 1 × Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1,725 m³/h Operating voltage: 400 V / 50 Hz Type of current: 3 × 400 V Lsdpoz Im Skofx Ahasah Fuse rating: max. 16 A Minimum conductor cross-section: 1.5 mm² Motor power: 0.75 kW Dimensions & Weight Dimensions (L x W x H): approx. 1,850 x 1,200 x 2,300 mm Machine weight: approx. 550 kg

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Lajdpfoxy Tmnex Ahaoh

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column Ledpfx Asz Ipl Tshaeah - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 Lsdpfxjz Ipmdj Ahajah SPECIAL PRICE!

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm Ljdpfxszkvx Uj Ahaoah plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: new, Year of construction: 2026, CORMAK PS12E-2000 Panel Saw with Scoring Unit The CORMAK PS12E-2000 panel saw with scoring unit is a solid and precise woodworking machine designed for cutting furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its dual cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without chipping or splintering, which is essential in furniture production and interior finishing applications. Main Advantages of the Machine Dual cutting system: main blade + scoring blade – eliminates the risk of laminate tearing and ensures clean edges. Stable cast iron worktable – provides precision and rigidity even under heavy loads. Large 2000 mm sliding table – designed for cutting large-size workpieces. Powerful 3.8 kW (400V) motor – enables effortless cutting of even hard materials. Adjustable cutting angle up to 45° – allows precise bevel cuts without loss of accuracy. Precision side fence – equipped with an accurate scale for repetitive cutting operations. Dust extraction system – efficient removal of sawdust improves cleanliness and workplace safety. Complete standard equipment – includes scoring blade, measuring guides, blade guard, angle indicator, and accessories. Construction and Technology The construction of the CORMAK PS12E-2000 panel saw is based on a precision-ground cast iron table and a bearing-mounted sliding table with support, ensuring stability and full control over the material during cutting. High-quality guide rails provide smooth and accurate table movement, while the reinforced machine body minimizes vibrations. The ergonomic front-mounted control panel allows convenient adjustment of cutting height and blade angle. The blades are driven by a 3.8 kW motor, providing sufficient power reserve for demanding applications and difficult-to-cut materials. Precision and Work Efficiency The CORMAK PS12E-2000 panel saw with scoring unit has been designed for high repeatability and accuracy. Cutting depth and angle adjustments are carried out using locking adjustment knobs, increasing both safety and operator comfort. High blade speeds, including up to 5800 rpm for the scoring blade, enable fast and clean cuts without burning or damaging the material surface. Applications This panel saw is designed for: Professional woodworking workshops Furniture manufacturing companies Custom woodworking businesses Prototype production departments It is ideal for daily production, dimension cutting, and complex projects requiring precise angled cuts. It is the perfect solution wherever cutting accuracy, edge quality, and reliability are essential. Standard Equipment Main cutting blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade angle indicator Eccentric clamp User manual EC Declaration of Conformity Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width on right side 1260 mm Saw blade tilt range 45° Cutting height at 45° 80 mm Cutting height with 315 mm blade at 90° 100 mm Cutting height with 300 mm blade at 90° 95 mm Maximum main blade size 315 × 30 mm Maximum scoring blade size 100 × 20 mm Lodpfxjvuf Tme Ahajah Main blade speed 4500 rpm Scoring blade speed 5800 rpm Motor power S1/S6 3.8 kW / 6.1 HP Power supply 3-phase, 400V Weight 275 kg Warranty 12 months Technical documentation (DTR) Included CE Declaration Yes

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Lodexw N Sbjpfx Ahajah Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons Lajdpfxjyyap Ej Ahajh • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: new, Year of construction: 2026, functionality: fully functional, arm reach: 955 mm, type of input current: AC, total height: 955 mm, total width: 955 mm, total length: 955 mm, load capacity: 5 kg, control cabinet length: 5 mm, overall weight: 35 kg, input voltage: 230 V, type of cooling: air, protection type (IP code): IP62, FAIRINO COBOTS – MODERN AUTOMATION FOR YOUR BUSINESS We offer advanced FAIRINO collaborative robots (cobots) designed to increase productivity, improve quality, and enhance safety in manufacturing processes. Thanks to their intuitive operation, fast deployment, and excellent price-to-performance ratio, FAIRINO cobots are the ideal automation solution for small, medium-sized, and large enterprises. Why Choose FAIRINO Cobots? ✅ Safe human-robot collaboration without the need for expensive and complex safety fencing. ✅ Easy programming through hand-guiding, graphical programming, and a user-friendly interface. ✅ Fast return on investment through process automation and 24/7 operation capability. ✅ High precision and excellent repeatability for demanding industrial applications. ✅ Compact design that allows operation even in limited production spaces. ✅ Easy integration with vision systems, grippers, CNC machines, AGVs, and other automation equipment. Lajdpfx Aozaz Eyehaeh Available Models The FAIRINO FR Series includes collaborative robots with payload capacities ranging from 3 kg to 30 kg, allowing the perfect solution for virtually any industrial application. Available models: • FR3 • FR5 • FR10 • FR16 • FR20 • FR30 Typical Applications • CNC machine tending • Welding and spot welding • Assembly and fastening operations • Packaging and palletizing • Quality inspection • Pick-and-place applications • Dispensing and gluing • Sorting and order fulfillment • Logistics and material handling automation Benefits for Your Business FAIRINO cobots help reduce production costs, increase operational efficiency, and improve process consistency and product quality. Their flexibility allows them to be quickly redeployed between workstations and adapted to new tasks, making them an ideal solution for modern Industry 4.0 manufacturing environments. Warranty and Support ✔ 12-month distributor warranty. ✔ Professional technical support and service coverage throughout Europe. ✔ Assistance with implementation, configuration, and integration into existing production processes. Contact us today to find the right FAIRINO cobot for your application and receive a customized automation solution tailored to your business needs.

Condition: as good as new (ex-display), Code: N0506 Brand: FELDER - AUSTRIA Model: K 700 S – CE Standard Precision panel saw with tilting blade and scoring unit - CE Standard Technical data: Tilting guide system “Easy-Glide” “Power-Drive” for automatic adjustment of blade height and tilt Carriage length 3200 mm Blade inclination 90/45° Cutting width 1250 mm Max blade diameter315 mm Bore 30 Rpm 4800 Max cutting height at 90°104 mm Max cutting height at 45° 72,7 mm Adjustable scoring unit - blade diameter 120 mm – Bore 20 rpm 8600 Main blade motor 7,5 Hp Tilting guide on fence 0,45° Support roller on fence Dust extraction connection diameter 120 mm Upper blade dust extraction diameter 50 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1050 h Weight kg 740 Laodpfxezqd Hts Ahajh

Condition: used, Year of construction: 2003, Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data - Manufacturer: Kettner GmbH / Krones Group - Machine Type: Bottle packer / crate packer - Model: Blitzpac Junior E 3T - Year of Manufacture: 2003 Lodezbg T Eopfx Ahaeah - Application: Packing of bottles into crates - Format: 20 x 0.5 l crate - Configuration: 4 packing units, each with 4 x 5 positions - Gripper System: Pneumatic matrix gripper for bottle handling - Conveyor System: Modular chain conveyor with stainless steel lane guides - Drive System: SEW-Eurodrive gearmotors - Safety: Protective fencing, transparent guarding, safety / sensor equipment - Electrical Supply: 230 / 400 V AC - Current Type: 3-phase - Frequency: 50 Hz - Nominal Current: 13 A - Condition: Used, installed in industrial bottling environment

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch Lasdecq E Uujpfx Ahaeh techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Lasdpfslht Htjx Ahajh Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Planer-thicknesser machine with 520 mm planing width and motorized thickness table adjustment Stable steel cast iron construction Large, ribbed planer tables made of cast iron, annealed to prevent warping Smooth operation due to high self-weight Four feed speeds Motorized thickness table adjustment with two speeds and digital display Segmented pressure shoes in the infeed 4-knife cutterhead, precision-mounted Helically toothed steel feed roller for particularly even and gentle wood feed Take-off roller with rubber coating Large planer fence, adjustable 90°-45°, readable from the front Lajdjbxz S Hjpfx Ahajh Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa cutterhead Knife changes in seconds When the machine starts, the knives are automatically tensioned by centrifugal force - self-clamping The knife overhang adjusts automatically without adjustment or screwing The planer table is adjusted by a stable and precisely guided parallelogram system, ensuring that the distance between the table tips and the cutterhead remains the same in every adjustment position. The stable aluminum planer fence is anodized as standard, easily adjustable, and offers a generous support surface. The adjustable inclination from 90° to 45° is easily readable from the workstation. Standard with an auxiliary fence for safe planing, even of narrow workpieces. Fig. with optional equipment The connection point for the dust extraction is always in the same position, both for planing and thicknessing. This eliminates the need for additional dust extraction hoses or cumbersome repositioning and routing around the machine. Technical data Total length of planer tables 2300 mm Infeed table length 1180 mm Planing width 520 mm Dimensions of planer fence 1200 x 190 mm Swivel range of planer fence 90 - 45° Min./Max. planing height 3/250 mm Cutterhead diameter / number of knives 100 mm / 4 pcs. Feed speed 5/8/12/18 m/min. Speed 5000 rpm Motor power 400 V / 50 Hz / S6 Dust extraction port diameter 120 mm Weight 1020 kg Top machine Location: Bitburg - available immediately

Condition: new, Year of construction: 2026, The CORMAK PS12E-3000 is an industrial panel saw with a scoring unit, designed for intensive operation in woodworking plants, furniture workshops, and production facilities. It is a high-performance machine for precise processing of wood-based panels, MDF, HDF, plywood, and solid wood. Equipped with an advanced cutting system, the PS12E-3000 panel saw enables chip-free operation, even when performing complex angled formatting cuts. Main Advantages of the Machine Precise chip-free cutting – thanks to the additional scoring blade, the panel saw perfectly handles laminated boards, preventing surface damage and chipping. Large 3000 × 270 mm sliding table – the bearing-mounted carriage ensures stable material guidance while maintaining maximum cutting accuracy. Cutting width up to 1220 mm – suitable for large-format panels and oversized workpieces. Angled cutting capability (0–45°) – precise adjustment of the main blade tilt allows a wide range of woodworking applications. High-performance motor – 3.8 kW (S1) power ensures continuous and reliable operation during demanding production tasks. Thought-out ergonomics – convenient control panel, blade height locking system, and connection point for dust extraction. Construction and Technology The construction of the PS12E-3000 panel saw is based on a rigid steel frame resistant to twisting and vibration. The main worktable (800 × 385 mm) and side table (880 × 800 mm) are made from durable materials, ensuring long-term stability and reliability. The sliding carriage moves smoothly on precision guides, allowing accurate positioning and controlled movement of the workpiece. The main cutting blade with a diameter of 315 mm works together with a 100 mm scoring blade, providing excellent results when formatting panels. Blade replacement is quick and convenient thanks to the practical mounting system. Precision and Work Efficiency The PS12E-3000 circular panel saw for wood provides excellent dimensional repeatability and clean cutting edges during every operation. Thanks to high rotational speeds: 4000 rpm – main blade 5800 rpm – scoring blade the machine enables fast and accurate cutting, even in demanding materials. Performance is supported by a powerful drive system and precise adjustment of cutting depth and blade angle. Applications The CORMAK PS12E-3000 panel saw is used in: furniture manufacturing and interior fitting production, professional woodworking and carpentry workshops, cutting prefabricated wood-based panels, precision sizing of structural and finishing materials. It is an ideal solution for companies looking for a machine that combines high power, accuracy, and versatility. Standard Equipment Main cutting blade 305 × 30 mm Scoring blade 90 × 20 mm Support arm and rip fence Worktable extension Mitre fence Blade angle indicator Eccentric clamp Technical Specifications Parameter Value Sliding table dimensions 3000 × 270 mm Main table dimensions 800 × 385 mm Side auxiliary table dimensions 880 × 800 mm Cutting width 1220 mm Saw blade tilt range 0–45° Cutting height at 90° 100 mm Laodpfjvugc Aox Ahaeh Cutting height at 45° 80 mm Maximum main blade diameter 315 mm Maximum scoring blade diameter 100 mm Main blade speed 4000 rpm Scoring blade speed 5800 rpm Motor power S6 5.3 kW / 7.1 HP Motor power S1 3.8 kW / 5.1 HP Power supply 400 V Weight 309 kg

Condition: new, Year of construction: 2026, The CORMAK PS315PRO-2000 sliding table saw with scoring unit is a solid, precise, and versatile machine designed for use in carpentry workshops, furniture manufacturing plants, and wood-based material processing facilities. Thanks to its compact 2000 mm sliding table length, heavy-duty guides, and reliable scoring system, this model performs excellently in the serial cutting of MDF, HDF, plywood, and solid wood panels. Main Advantages of the Machine Sliding table saw with scoring unit – a dual-blade system ensures chip-free cutting, even in laminated and single-sided foil-coated materials. Stable and durable construction – a robust frame, cast iron tables, and steel guides guarantee long service life and resistance to deformation. Wide adjustment range – blade tilt from 90° to 45° and adjustable main blade height allow for a wide variety of angle and depth cuts. High rotational speed – 5800 RPM of the main blade ensures clean, fast cuts without material burn marks. Dust extraction compatibility – an integrated extraction port enables efficient connection to a dust collection system. Safety and ergonomics – blade guard, rip fence with scale, and safety components increase comfort and operational safety. Construction and Technology The PS315PRO-2000 sliding table saw has been designed for maximum stability and reliability. It features a rigid steel frame base, while the main working surfaces are made of precision-ground cast iron. The main cutting blade (Ø 315 mm) works together with a scoring blade (Ø 90 mm), eliminating the risk of chipping. The machine is equipped with two separate motors, ensuring independent operation of both cutting systems. Material movement is supported by a sliding carriage with a bearing-mounted guide. Clear length and angle scales allow for quick and precise cutting parameter adjustments. Precision and Performance The CORMAK PS315PRO-2000 sliding table saw has been optimized for machining accuracy and ease of use. With rotational speeds of 5800 RPM (main blade) and 4000 RPM (scoring blade), cuts are smooth, burr-free, and minimize the need for further finishing. The adjustable blade tilt enables precise angle cuts without the need to reposition the material. Standard Equipment Main cutting blade Scoring blade 2000 mm sliding table with support Ljdeylxhvepfx Ahaoah Rip fence and crosscut fence Mitre guide Blade guard with dust extraction port Table extension Eccentric clamp Blade tilt angle indicator Operation manual CE Declaration of Conformity Optional Equipment Additional cutting blades Dust extraction system Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width 1220 mm Blade tilt 45° Cutting height at 45° 80 mm Cutting height at 90° 100 mm Max. main blade diameter 315 mm Max. scoring blade diameter 100 mm Main blade speed 5800 RPM Scoring blade speed 4000 RPM Motor power 3.0 kW Power supply 400 V Dust extraction port 100 mm Weight 350 kg Warranty 12 months Manual included YES CE Declaration YES

Condition: new, Year of construction: 2026, CORMAK HBS700 Band Saw The CORMAK HBS700 is a high-performance band saw designed for professional cutting of metal, wood, aluminium, and plastic materials. Thanks to its large guide wheel diameter, powerful 4 kW motor, and robust construction, the HBS700 band saw is an ideal solution for production plants, metalworking workshops, woodworking facilities, and industrial applications. Main Advantages of the Machine Large working capacity – maximum cutting height of 430 mm and cutting width of up to 700 mm allow machining of large and heavy workpieces. High-quality work table – a cast iron, ground, and polished table ensures stable material support and precise cutting. Quick blade tensioning lever – reduces setup time and simplifies blade replacement and maintenance. Wide table tilting range – adjustment from -5° to +45° enables precise angled cuts. Blade tension inspection window – allows continuous monitoring of blade tension without stopping the machine. Constant blade speed of 18 m/s – optimized for cutting materials with different hardness levels. Construction and Technology The CORMAK HBS700 is an industrial-class band saw based on a rigid steel structure and a heavy-duty machine frame, ensuring long service life and resistance to deformation. The large band wheels with a diameter of 680 mm provide smooth operation and stable blade guidance. The machine is powered by a three-phase motor with a power rating of 4.0 kW (S1) / 5.6 kW (S6), allowing efficient operation even when cutting thick and demanding materials. Integrated dust extraction outlets 2 × 100 mm enable effective connection to extraction systems for sawdust and chips, significantly improving workplace cleanliness and safety. Precision and Working Efficiency The large work table measuring 790 × 500 mm, combined with a wide cutting blade (up to 40 mm) and a rigid guide system, ensures high-quality and repeatable cuts even in demanding applications. The operator has full control over cutting direction, angle, and depth. The well-balanced construction minimizes vibration and reduces the risk of cutting errors, ensuring smooth and accurate operation. Applications The CORMAK HBS700 band saw is suitable for: Cutting non-ferrous metals and structural steel, Processing solid wood and laminated timber, Prototype and production work in industrial facilities, Cutting technical plastics and composite materials, Use in technical workshops, tool rooms, and metalworking facilities. Standard Equipment High-voltage release safety switch Precision rip fence Cutting blade 5020 × 25 mm, 10 TPI Optional Equipment Extraction hose Ø100 mm Clamps for dust extraction connection Transport trolley or mobile base Technical Specifications Parameter Specification Wheel diameter 680 mm Maximum cutting height 430 mm Maximum cutting width 700 mm Work table dimensions 790 × 500 mm Table tilt range -5° to +45° Blade width range 19 – 40 mm Blade length 5020 mm Blade speed 18 m/s Overall dimensions 1090 × 700 × 2430 mm Weight 308 kg Motor power S1 / S6 4.0 / 5.6 kW Dust extraction outlets 2 × 100 mm Laedjvugtnspfx Ahash Power supply 3-phase, 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, CORMAK PT265 Planer Thicknesser The CORMAK PT265 planer thicknesser is a professional woodworking machine designed for intensive and precise processing of solid wood and wood-based materials. The new version of this machine features an innovative connected table system that significantly improves work efficiency and eliminates adjustment errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable solution for carpenters, craftsmen, and production workshops requiring accuracy, durability, and consistent machining results. Main advantages of the machine New connected table system – synchronized calibration of the infeed and outfeed tables eliminates setup errors and improves machining precision. Stable cast iron construction – the 170 kg machine weight minimizes vibration and increases operating safety. Powerful S6: 2.6 kW motor – provides smooth and efficient processing of hard wood species. Quick conversion from surface planer to thickness planer – fast mode switching reduces downtime. Three HSS knives – ensure precise cutting and excellent surface quality. 265 mm planing width – allows processing of wider workpieces. Design and technology The CORMAK PT265 is a modern woodworking planer thicknesser based on a reinforced construction with cast iron components. The working tables are ground and properly balanced to ensure repeatable accuracy and precision. The innovative connected table system enables synchronized height adjustment – once the table level is set, no further calibration is required when changing the planing thickness. The centrally positioned thickness planer table mounted on a guiding column ensures even material feeding without deviations. Rubber anti-vibration feet additionally reduce vibration, improving component durability and machining quality. Precision and working efficiency Thanks to the 2.6 kW (S6) motor, the machine provides high efficiency while maintaining stable operating parameters, even when processing hard wood species. The Ø75 mm cutter shaft with three knives and a speed of 4000 rpm guarantees a perfectly smooth surface finish. The precise graduated scale allows accurate adjustment of the table height. The aluminium tilting fence (700 × 150 mm), adjustable from 90° to 45°, enables precise material straightening at various angles. Standard equipment Lsdpjvxhznsfx Ahajah Cutter shaft with three HSS knives Aluminium fence 700 × 150 mm Graduated handwheel for table height adjustment Cutter shaft guard Built-in Ø100 mm dust extraction outlet Rubber anti-vibration feet Technical specifications Parameter Value Cutter shaft diameter 75 mm Cutter shaft speed 4000 rpm Dust extraction outlet diameter 100 mm Tilting fence angle range 90–45° Number of knives 3 Shaft length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum surface planing width 265 mm Maximum thickness planing width 265 mm Maximum planing height 180 mm Maximum thickness planing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thickness planer feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Total motor power S6: 2.6 kW Power supply 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: Ljdpfeu Snlkjx Ahasah metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es – Maximum configuration for professionals Saw-milling combination with miter cutting device and pivoting milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be pivoted from 90° to -45° High-precision format sliding table made of anodized aluminum Large extension table (1200 x 650 mm) With material roller and extendable aluminum telescope stop up to 3300 mm Pivoting milling spindle from 90° to -45° towards the rear into the milling fence Four milling speeds With right/left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch Supplied as standard with separate saw parallel fence and separate jointing fence for planing Equipment details: Sliding table with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double-bearing milling unit Pivoting, made of cast iron Mounting points directly on the table, resulting in optimal smoothness Milling spindle mounted high up on precision ball bearings, resulting in low bearing load and maximum possible service life Powerful industrial motors Milling fence Heavy-duty professional design The high-quality milling fence made of cast iron is supplied as standard with fine adjustment 3-way positionable for quick resetting of the setting With fine adjustment via rack and pinion, numerical display and aluminum milling fence jaws Parallel fence With fine adjustment and quick clamping Stable round bar guide made of ground steel Can be conveniently folded down for cutting large workpieces Lasdpfxod Hx Hms Ahash Interchangeable aluminum ruler for narrow workpieces Cast iron double-bearing saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, bearing on both sides Height and adjustable up to 45° Scoring unit with separate scoring motor 0.55 kW as standard Extension table with angle-adjustable telescope stop with degree grid division Dimensions and weights Weight approx. 900 kg Dust extraction connection Dust extraction nozzle diameter 3 x 120 mm Dust extraction nozzle diameter saw blade guard 80 mm Drive power Scoring motor 0.55 kW Main motor 2 x 5.0 kW Electrical data Connection voltage 400 V Format sliding table and table Format sliding table width 360 mm Format sliding table height 142 mm Table length 1380 mm Table width 465 mm Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 125 mm Spindle speeds 3500/6000/8000/10000 min⁻¹ Milling tool diameter max. Lowerable 240 mm Mortise milling 320 mm Circular saw unit and scoring saw Cutting length 3200 mm Cutting width with parallel fence 900 mm Max. ripping width to the left of the saw blade 3300 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 104 mm Max. cutting height 45° 68 mm Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Lsdpfx Ahoit I Sbjaeah Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Lajdpecnxa Nofx Ahaoh Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result