Used Guide Fence for sale (5,531)

Condition: used, Year of construction: 2009, Overview This Twin Pack MDEL-S handle applicator, built in 2009, applies carry handles to beverage multipacks. It produced multipacks in several configurations, from 2x3 and 3x4 packs of 0.5 l bottles to 2x3 packs of 0.75 l and 1.5 l bottles, and runs on pre-spooled handle tape rolls. The machine was taken out of production in October 2026 when the line was replaced, and it is dismantled and ready for transport. Technical data - Manufacturer: Twin Pack (Italy) - Model: MDEL-S - Year of manufacture: 2009 - Machine type: handle applicator for beverage multipacks - Formats: 2x3 x 0.5 l, 3x4 x 0.5 l, 2x3 x 0.75 l, 2x3 x 1.5 l - Handle material: pre-spooled handle tape rolls Codo Ahzarspfx Akteri - Control: Siemens SIMATIC touch panel - Suitable for: water, soft drinks and beer Equipment - Handle application unit in a guarded frame with transparent doors and signal tower - Pack infeed conveyor with guide rails and perforated safety guard - Separate tape unit with reel holders and push-button station with emergency stop - Operator panel on a swivel arm with key switch and emergency stop Condition Very good condition. Dismantled after the line change in October 2026 and stored. Availability Available immediately. Location: Serbia.

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper shaft 510mm - max. width of workpiece – lower shaft 450mm - max. thickness of workpiece, 2-sided 200mm Cjdpozu R Thjfx Aktori – from above: - deflectors - 1 metal, toothed feed shaft - 2 metal, sequential feed shafts - 1 metal, toothed feed shaft - pressure roller - 510mm planing shaft, 4 knives, with the possibility of installing profile knives, approx. 7.5kW - pressure roller - smooth, metal feed shaft - upper pressure roller at the outlet, with 2 rubber feed rollers – from below: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing shaft, 4 knives, 7.5kW - 2 smooth, metal feed shafts – from the rear: - 2 side spindles 1) vertical right 200mm, 6.6kW 2) vertical left 200mm, 6.6kW - spindle diameter 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged in alternating positions - electric height adjustment - 2 types of feed speeds + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle 2x125mm, 145mm, 130mm - dimensions L/W/H 3200x1740x1650mm + control panel - weight 2100kg ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing shafts + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11372 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Linak, electric linear actuator -Type: LA28.1R-70-24-001 -Identification number: 13217 -Voltage: 24 V DC -Shaft: Ø 20 mm Crodpfx Aks Ahg Dwjtsi -Quantity: 1x linear actuator available -Dimensions: 330/100/H95 mm -Weight: 1.8 kg

Condition: used, total height: 2,850 mm, total length: 3,600 mm, total width: 1,500 mm, Year of manufacture: 2011 Colour: Grey Weight: 1.800 kg Resaw Centauro R1000 + RTF Machine number 19602 Year of construction 2011 Wheel diameter 1000mm Max cutting height 520mm Max cutting width 970mm Max saw blade width 110/80x1mm Max min saw blade length 6570/6380 Table size 1500x920mm Speed 570 Rpm 22kW (30hp) Required extraction capacity 2500 m³/h Working pressure 6-8 bar Dimensions 2255x2200x3000mm (LxWxH), weight 2300kg - Year: 2011 - CE marking present: Yes - Serial number: 19602 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1000 - Max. cutting to feed roller opening [mm]: 300 - Max. cutting to stop opening [mm]: 370 - Max. cutting height [mm]: 4750 Codpjz H T U Aefx Aktjri - Table width [mm]: 900 - Table length [mm]: 1380 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 220 - Options: Tiltable fence - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 3600mm x 1500mm x 2850mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm Csdpfxo Ahg Dtj Akteri - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,981 h, punching force: 41 t, sheet thickness (max.): 15 mm, overall weight: 4,900 kg, total width: 2,250 mm, total height: 2,100 mm, product length (max.): 5,800 mm, CNC punch press manufactured in 2009. This BOSCHERT CU-Profi features 4 Amada tool stations and a parting station of 60x10 mm, including tooling. It comes with a tooling package of punch and die sets for stations A and B, along with integrated infeed and outfeed roller conveyors for efficient material handling. If you are looking to get high-quality punching capabilities, consider the BOSCHERT CU-Profi machine we have for sale. Contact us for further details. - Punching Force: 400 kN (40 tons)- Maximum Sheet / Material Thickness: 12 mm to 15 mm (copper/aluminum flat bar: standard 3 – 12 mm, up to 15 mm max; copper up to 10 mm with diameter 31.7 mm, copper up to 12 mm with max. diameter 20 mm)- Maximum Workpiece Width: 15 – 200 mm- Maximum Workpiece Length: Up to 3 m- Tool Stations: 4+1 stations (4x Amada holder size B + 1x separation/cutting station 60 x 10 mm / 60 x 8 mm)- Maximum Punch Diameter: 4 x 31.7 mm or any contour within 31.7 mm (B station)- Included Tooling: Punch and die sets for stations A and B, punch reduction adapter from B to A, die holder adapter from B to A, separation/cutting tool (excluding copper stock and tooling/punches)- Stroke Rate: Approx. 85 strokes/min max. (optional fast hydraulics approx. 180 strokes/min)- Stroke Counter: 4,541,086 strokes- Operating Hours - Machine On: 35,855 h- Operating Hours - CNC On: 35,981 h- Operating Hours - Drives On: 35,799 h- Operating Hours - Hydraulics On: 8,465 h- Material Infeed: Material gripper feed via guide unit and AC servomotor; zero-waste gripper design; repeatability ±0.1 mm- Clamping System: Hydraulic Y-axis material clamping before and after the punching head- Parts Discharge: Finished part unloading system downstream of punching head; automatic scrap disposal- Support Surface: Roller support table and guide track system; large support table for copper busbars- Control System & CNC: CNC Control LABOD with graphic path control; DOS-based architecture; 3.5" floppy disk drive; tool library for 500 tools with graphical shape display; automatic overlap and cutting force monitoring- Software & Connectivity: 1x PC version (runs on Windows 95/98/NT 4.0); 1x CNC/CAD (cncKad / Metalix CAD/CAM with DXF, IGES, CADL, DWG import; server-capable); 1x Multitalk (SD card 256 MB storage for ~100,000 programs, USB interface with external cabinet cable mount, 256 MB USB stick, network port with FileZilla Server integration)- Safety: Front light curtain safety barriers and safety interlock guarding compliant with CE standards- Hydraulics: H&L hydraulic unit with oil cooling (4.7 kW standard / 11 kW optional); 160 l oil capacity- Connected Load (Anschlußleistung): 18 – 25 kVA- Power Supply (Netz): 3 x 400 V, 50/60 Hz- Control Voltage (Steuerspannung): 24 V- Required Fuse Protection: 3 x 35 A- Dimensions (L x W x H): 5.8 m x 2.25 m x 2.1 m- Machine Weight: 4,900 kg- Machine Color: Gentian Blue (RAL 5017) Credpfx Akj Ahkaiotei

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. Csdpfxo Ahpqmj Aktjri - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis KOIKE Gammatec 1530 plasma cutting machine was manufactured in 2018. It features an effective cutting area of 3,000 × 1,500 mm and a maximum cutting thickness of 30 mm for steel. The machine is equipped with a KOIKE Katana CNC controller and a 15-inch touchscreen for ease of operation. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE Gammatec 1530 machine we have for sale. Contact us for further details. • Effective cutting area: 3,000 × 1,500 mm • Maximum cutting thickness (steel): 30 mm; production thickness: 25 mm • Plasma cutting current: 35–200 A • Cutting speed: 50–20,000 mm/min; positioning speed: 34,000 mm/min • Drive system: AC servo motors Cjdo Ahqruepfx Aktsri • Guide system: Hardened precision guides with rack & pinion • Cutting torches: 1 • Table height: 900 mm • Cutting table: Integrated fume extraction table • Compressed air: 7 bar, oil- and water-free • Machine control power: 230 V / 50 Hz, 2 kVAPlasma system – Kjellberg Smart Focus 200 • Manufacturer/model: Kjellberg Smart Focus 200 • Cutting current: 35–200 A; duty cycle: 100% • Max piercing capacity (mild steel): 30 mm • Marking current: 12–50 A • Power supply: 400 V / 3-phase / 50 Hz • Max connected load: 51 kVA; required fuse: 100 A (slow-blow) • Dimensions (L×W×H): 1,030 × 680 × 1,450 mm; weight: 388 kg • Gas control: PGV-200 automatic gas console • Cutting torch: PerCut 4000CNC control & torch height control • CNC controller: KOIKE Katana with 15" touchscreen • Operating system: Windows 7 Professional • File formats: DXF, EIA, ESSI • Network: Ethernet • Torch height control: SmartLift ARC120 • Z-axis travel: 120 mm; Z positioning speed: 6,000 mm/min • Collision protection: Magnetic torch holder • Plate detection: Ohmic touch sensing • Plate alignment: Manual Additional equipment • Note: Dust extraction unit is excluded

Condition: good (used), Year of construction: 1980, overall weight: 18,000 kg, Used plate shear from Safan Type: VS 620 4 Capacity: 6200 x 4 mm Crodpfj Ahwpgjx Aktsi Electric back gauge Manually adjustable cutting clearance and cutting angle Equipped with a pneumatic hold-down table at the rear Includes a square guide

Condition: good (used), Code: 0512 Brand: CASOLIN - ITALY Model: F 45 KL - CE STANDARD Automatic spindle moulder with tilting spindle (-10 to +45°), extended tables and automatic feeder, for joinery, furniture, custom-made furniture, window and door frames, doors, panels, sawmills, plastics and various – CE Standard Spindle diameter 35 mm Motorised spindle lifting Motorised spindle tilting (-10 +45°) Decimal display for spindle height Digital display for tilting Digital display for speed Precise worktable adjustment system by handwheel positioned on the front of the machine Extended worktables (2550 mm) with a removable support for large workpieces Spindle head movement by prismatic guides: high positioning accuracy Micrometric adjustment of the feed table with millimetre scale Quick locking and unlocking operations for spindle head positioning Spindle rotation reversal Useful spindle length 140 mm Vertical stroke 155 mm Motor power 7,5 Hp Worktable height 900 mm N° of speeds rpm 3000/4500/6000/8000/10000 Aluminium guides HERMETIC N° 2 suction inlets diameter 120 mm Automatic 4-roller feeder MAGGI Overall dimensions mm 2550 x 1200 x 1600 h Weight kg 920 Crodpfxj Ahrhqe Aktji

Condition: excellent (used), Catalog number 6309 TECHNICAL DATA PLANER: - Roller width 510mm - 3-knife roller - Adjustable angle guide - Table length 1910mm - Both tables are adjustable THICKNESSER: - Max. thickness of workpiece in the thicknesser 200mm - Guard on the thicknesser roller from above: - Pawls - Toothed infeed roller - Planing roller Cedpfszkhakex Aktsri - Smooth outfeed roller - Infinitely adjustable feed rate 7-14 m/min - Main motor approx. 4kW - Roller speed 3000/6000 rpm - Dimensions L/W/H 1910x870x970mm - Weight 780kg - Made in Italy - Very good condition, used machine Net price: 14500 PLN Net price: 3370 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA PLANER: - roller width 510mm - rollers in the lower table - original cast iron fence, angle adjustable - table length 1810mm - both tables adjustable THICKNESS PLANER: - max thickness of workpiece on the thickness planer 200mm Codpfx Akezu R Ekstsri - guard on the thickness planer shaft from above: - pawls - toothed infeed roller - pressure roller - planing roller pressure roller - smooth outfeed roller from below: - 2 adjustable rollers in the lower table - 2 feed speed types - main motor 2.95kW - dimensions L/W/H 1940x1200x1120mm - weight 970kg Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7901 Technical specifications: - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from moving backward) - sliding roller, metal Crjdpfx Akszul Akjtoi - ejectors - sliding roller, metal - roller with saw blades - 2 smooth sliding rollers, metal - from below: - guide strip - ejectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 22kW - brake - diameter of the dust extraction nozzle 200mm - overall dimensions L/W/H 2300x1370x1570mm - weight approximately 1700kg ADVANTAGES - Made in Italy - Very good condition - DTR documentation - Used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number 7807 TECHNICAL DATA - track width 350mm Codpfx Akozwwvzotsri - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table dimensions 1900x790mm - height from base to table 830mm - top - 2 rows of pawls/ejectors - 2 smooth, metal feed rollers - saw arbour - 2 feed rollers, pressure rollers - bottom - guide strip - pawls/ejectors - track - electric height adjustment of the machine body - central lubrication - stepless speed adjustment via frequency inverter - feed motor 4kW - main motor 75kW - dust extraction nozzle diameter 2x150mm - overall dimensions L/W/H 2050x1800x1800mm - weight approximately 3500kg ADVANTAGES - German-made - DTR documentation available - used multi-blade saw - very good condition Net price: 58900 PLN Net price: 13700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 1994, pressing force: 60 t, table width: 1,250 mm, table length: 2,500 mm, ram plate width: 1,250 mm, ram plate length: 2,500 mm, distance table to ram: 350 mm, total length: 3,050 mm, total width: 1,550 mm, total height: 1,900 mm, overall weight: 3,200 kg, number of cylinders: 6, No. 04557 Veneer press Johann Frischling V 60 E Used, year of construction 1994 Type 250/125/6 Pressing area 2500 x 1250 mm Total pressing force 60 t 6 hydraulic cylinders, bottom-mounted Csdpfx Aks Ahz Awetori Scissor guide for even pressure distribution Daylight 350 mm Loading possible from all sides Electric heating plates ELKOM, gold anodised Top and bottom plates heated, 8.5 kW each Automatic temperature control via thermostats Electro-hydraulic unit with contact manometer Automatic pressure top-up, infinitely variable pressure adjustment Press timer with automatic opening, switchable to manual mode Push-button control for opening/closing Pressure chart on the machine for direct reading of the closing pressure Emergency stop pull cord all around, stops opening and closing Surrounding safety bar below the press table Mechanical inspection support Transport dimensions approx. 3050 x 1550 x 1900 mm LWH Weight approx. 3200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control, manufactured in 2008. Excellent CONDITION, CE-compliant!! Technical data: >> Year of manufacture: 2008, Machine No. 346199 >> Fixed angular table >> Speed: continuously variable up to 4000 rpm >> Feed rate: continuously variable in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Rapid traverse rates x/y/z: 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke, vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1700 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 12 kVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system Code Ah Tvbjpfx Aktori About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. It comes from a company where it was used only sparingly for training purposes. It features a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy, by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: used, Year of construction: 2014, functionality: fully functional, 4-AXIS CNC TURNING CENTER • Color: Light gray/anthracite RAL7035, 7016 • Main spindle 26 kW • Counter spindle AS 11 kW • Bar diameter 65 mm • Control system Fanuc 31i B-5 • Counter spindle can be lowered • 2 Y-axes *50/-40 mm, 4-way guided • X-axes with flat guide • 2 turrets with 12 tool stations each • 24 powered tool stations. Torque 47 Nm. • 2 C-axes • Bar loader interface • Controlled parts catcher, can be used for main and counter spindles • Finished parts conveyor belt, installed lengthwise, 500 mm long • Hinged belt chip conveyor with discharge height of 820 mm • 2 coolant pumps at 7 bar including filter • Foot switch for chuck operation on the main spindle • Internal flushing system with 4-bar pump • Flushing gun, 4 bar, for cleaning the work area • Intelligent handwheel Program execution with simultaneous movement of all axes MACHINE EQUIPMENT - Conveyor belt for machined parts Belt width/length 300x800 mm, Discharge on the operator side - Measuring probe, swiveling, with 2 heads for tool measurement Turret, top and bottom - High-pressure coolant pump, 18 bar for 2 turrets incl. coolant filter Pump capacity 20 l/min - MANUAL GUIDE i, dialog programming Turning/milling cycle, 3D simulation Manual (on CD) - SBS tool breakage and wear monitoring - Programmable axis mirroring Bar loader magazine Bar loader magazine FMB turbo 5-55 Bar length max. 3200 mm Oil lubrication for the bar Bars 5-55 / turned down to 50 mm Loading level 250 mm Guided by roller guide, can be changed to guide chuck (polygonal) Precise positioning during insertion Interval mode for polygonal material Residual piece ejection to the rear (max. 530 mm) Creds Ah Scnepfx Aktsi

Condition: refurbished (used), Year of construction: 2015, operating hours: 33,630 h, ASCO A120P Dry Ice Pelletizer – Refurbished We have various new parts in stock for Cold Jet machines. A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transport. Specifications Brand: ASCO Type: A120P Operating hours: 33,630 hours Ready for immediate use Major maintenance performed (2024) The machine underwent extensive maintenance by ASCO Germany in late 2024. During this process, several critical wear parts were replaced, and the press unit was refurbished. Among the parts replaced: ✔ New press chamber kit ✔ New piston ✔ New guide bushings ✔ New sintered bushing ✔ New hydraulic filter ✔ New solenoid valves ✔ New pressure regulator (latest version) ✔ Hydraulic valve replaced ✔ Various springs ✔ New seals ✔ Various fasteners Service documentation available The machine comes with the original documents, including: Original ASCO service report Test results after maintenance This confirms that extensive refurbishment work was carried out on the press chamber and hydraulic components. Worldwide shipping. Codpfx Akjzquixjteri Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine to buy, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: ready for operation (used), Year of construction: 2021, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep 3001.15P/ME plasma cutting machine was manufactured in 2021. It features a working area of 1500x3000mm, ideal for precise and large-scale cutting tasks. If you are looking to get high-quality cutting capabilities, consider the MicroStep 3001.15P/ME machine we have for sale. Contact us for more information. MasterCut Compact 3001.15P/Me Approx. 3,000 x 1,500 mm Sturdy construction Up to 100 mm material thickness High-quality linear guides and backlash-free drive on both sides Digital, maintenance-free AC servos with IRC Up to 40,000 mm/min IRC 2500 (incremental encoder) • Permissible plate thickness: stable construction up to 100 mm material thickness • Guides/Drives: high-quality linear guides and double-sided clearance-free drive • Axis control: digital, maintenance-free AC servos with IRC • Positioning speed: up to 40,000 mm/min • Measuring system: IRC 2500 (incremental encoder) • CNC control: MicroStep iMSNC with integrated network card • Plasma power source: Hypertherm XPR170 • Gas console: automatic Core gas console • Table surface: grid cover in the cutting table • Height control: "THC" module for automatic height regulation via arc voltage • Marking unit: "MicroPunch" needle marking unit • Safety features: double-sided rope safety system (collision protection) for the gantry via Emergency Stop • Visual signaling: 2-color LED signal tower on the gantry bridge Crsdpfx Ajycvq Aektsi • Operation interface: externally standing MMI console • Connectivity: USB 3.0 port for storage media • Software: AsperWin Basic (2D programming) and AsperWin Nesting (automatic nesting)

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Credpfox U Dfgex Aktsi Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Shipping possible at extra cost!

Condition: good (used), Year of construction: 1978, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Crodpfx Akszvdk Aotei Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Year of construction: 2020, operating hours: 3,182 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10465394, MEIKO M-iClean HXL-PW – Double-basket hood-type dishwasher including stainless steel infeed and outfeed tables with basket guide. Premium class, from ongoing operation in an event venue. Outstanding key data according to the machine display: only 3,182 operating hours and 23,991 cycles – exceptionally low for the year of manufacture (screenshot in the images). Commissioned on 27.02.2020, serial number 10465394, software version 6.4.6. Equipment: Double-basket system 2 × 500 × 500 mm, up to 120 baskets/hour; PowerWash with multiple pump power levels; hood automation with automatic basket recognition; detergent and rinse aid dosing; drain pump; free pass-through height 505 mm; includes infeed table with roller conveyor and outfeed table; connection 400 V. Ideal for event venues, catering, canteens, hotels, or large kitchens. Inspection and test run on-site are possible and desired. Sold commercially with a proper invoice (VAT shown). Collection/dismantling by arrangement. Cedsznd U Sspfx Aktsri Price: €9,000 fixed price, plus VAT.

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planing unit) and veneer stop table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The squaring table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the stop table and on the front support for end cuts of the veneer packs. Special equipment with rack and pinion compensation for the pressure bar, which prevents the pressure bar from skewing. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle, so they only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision saw blade, sharpened. Planer head Z4 with pull-cut, fitted with new carbide inserts and spare blades included. Practical front veneer support, automatically extended pneumatically when using the planing unit. Dust extraction connection 150mm with dust extraction duct. V-belt renewed. CE marking. Emergency stop cable. Operating manual. On-board tools. Original paint, only a few spots retouched. The machine is in excellent condition and has clearly been used only rarely. Cjdpo Afznuofx Akteri Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Height-adjustable with a rabbeting cutter; the fence can be adjusted via the handle and is mounted on a sturdy table with rollers. Location: Nattheim Crodoz H Txbjpfx Aktoi

Condition: used, Max. saw blade diameter: 450 mm Motor power: 7.5 kW Max. cutting width: 800 mm Carriage length: 5000 mm Saw blade bore: 30 mm Control panel: located at the bottom of the machine housing Height adjustment: hydraulic, via foot lever Swivel adjustment: hydraulic, via foot lever Swivel angle indicator: scale Cutting width indicator: scale Maximum cut length on the crosscut fence: 3200 mm Csdps Af Nu Dsfx Aktjri Crosscut fence indicator: scale Crosscut fence design: fixed 90° PSV safety guard: Yes Location: Nattheim