Used Hardness Test for sale (12,187)

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Version: air-cooled For sale is a CTS temperature shock test chamber designed for thermal cycling and shock testing in industrial, research, and development settings. Technical Specifications: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Transfer time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection rating: IP 22 Refrigerants: R404A: 2.3 kg Dedpfx Aey I Ntcshnsuu R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" external thread Equipment: Two-chamber system (hot/cold chamber) Digital CTS controller Display / control panel Program mode Operating hours counter Observation window Interior lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as seen in the pictures Scope of delivery as pictured Inspection by appointment possible. Loading can be arranged. Commercial sale. Sold without warranty. (Subject to change and error)

Condition: excellent (used), Vötsch Temperature Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a Vötsch temperature shock test chamber in a two-chamber configuration, designed for rapid temperature cycling tests. Suitable for use in industry, automotive, aerospace, as well as research and development. Temperature Ranges: Hot Chamber: +50°C to +220°C Cold Chamber: -80°C to +70°C Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate (hot chamber): approx. 11 K/min Heating rate (cold chamber): approx. 2 K/min Cooling rate: approx. 3 K/min Test Area: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable port: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerants: R404A: 2.9 kg R23: 1.27 kg Pressure Data: Low pressure max.: 22.5 bar High pressure max.: 25 bar Dimensions: Approx. 930 x 2115 x 1970 mm Weight: Approx. 1000 kg Equipment/features: Two-chamber shock test system Digital control Programmable operation Observation window Cable port Condition: Used Control system overhauled and newly rewired Control panel replaced Spindle and spindle motor replaced Plate heat exchanger insulated Scope of delivery: Duodpfx Ahsy Iyuwjneu Vötsch VT 7012 S2 temperature shock test chamber Accessories as shown in the pictures Inspection by appointment possible. Loading can be arranged. Sold as-is, without warranty. (Subject to prior sale and technical modifications)

Condition: excellent (used), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration test system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and environmental testing in industrial, automotive, aerospace, as well as research and development applications. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial version Mains voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ vibration control system Multi-channel control system Including Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Duedpfx Asy Iwp Sehnju Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip Table 760 mm x 850 mm Threaded insert spacing: 100 mm Activated Licenses: Excitation modes Sine, resonance dwell, limit control, amplitude dwell Multi sweep sine, noise soft-clipping, sine-on-random PSD limit control, shock Extensions Scheduler, multi-language, launcher, system monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / control active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories per photos Loading possible. Sale without warranty. Subject to prior sale and changes.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: EFCO Maschinenbau PS 15 Valve Testing Bench. The bench is pre-owned and in excellent working condition. It is currently connected and can be inspected and tested on-site. EFCO PS series test stands are designed for pressure and tightness tests on various types of valves. Suitable for testing shut-off, control, and safety valves. Dodpfxoy R N A As Ahnouu Specification: Model: EFCO PS 15 Vertical Test Bench Clamping Force: 15 t Suitable for testing: Shut-off valves, control valves, safety valves Working Range: DN 50–600 DN 2″–24″ The working range can be extended using external testing Test Pressure: Water up to 1380 bar (20000 psi) Air / nitrogen up to 300 bar (4350 psi) Quick specimen clamping Convenient and safe operation Robust industrial frame More information: EFCO PS 15 Professional German equipment suitable for repair workshops, energy, oil, gas, and industrial companies. If you have any further questions, we will be glad to assist you.

Condition: excellent (used), RS-Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KSS 600/75-10K Design: Climate Test Chamber / Environmental Simulation Chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulatoren. Suitable for temperature tests, climate tests, material, and aging tests. For use in industrial testing and measurement applications. Technical Data Temperature range: -75 °C to +180 °C Temperature change rate: heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Dujdpoy H Ib Ajfx Ahneu Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1,400 kg Equipment - RS-Simulatoren control / operating panel - Programmable operation - Observation window - Temperature monitoring in the test chamber - Operating hours counter - Side feedthrough - Robust industrial design Scope of Delivery - RS-Simulatoren climate chamber KSS 600/75-10K - Delivery as shown Service before delivery (optional) - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as per images. Note Used device, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.

Condition: excellent (used), Binder Climate Test Chamber MKFT 720 E3.2 Device Information Manufacturer: Binder Model: MKFT 720 E3.2 Year of Manufacture: 2017 Item Number: 9020-0288 Design: Climate Test Chamber (Change-over type) Cooling: Air-cooled Description Used Binder climate test chamber. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Intended for applications in industry, research, development, and quality assurance. Technical Specifications Temperature Range: -70 °C to +180 °C Humidity Range: 10% to 98% RH Internal Volume: approx. 734 liters Max. Total Load: 160 kg Max. Load per Shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection Class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. Operating Pressure: 29 bar Performance Data - Temperature Temporal temperature deviation: 0.1 to 0.5 K Spatial temperature deviation: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data - Climate Climatic range: +10 °C to +95 °C Humidity range: 10% to 98% RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Features Touch control panel Programmable and constant operation modes Observation window Stainless steel test chamber Interior lighting Cable port Mobile on castors Robust industrial design Weight Approx. 635 kg Scope of Delivery Binder climate test chamber MKFT 720 E3.2 Scope of delivery as shown Service prior to delivery (optional) Functional test Dedpfx Ahoy H H Smsnouu Refrigeration service Leak test Test run with protocol Condition Used. Condition as per images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged on request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: new, functionality: fully functional, Year of construction: 2022, The Matest C313N is a laboratory freeze-thaw and climatic chamber primarily used for construction material testing—specifically for studying the behavior of concrete, cement, aggregates, and other materials under various temperature and humidity conditions.Primary purposes:Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal cycling).Standardized durability testing of construction materials (e.g., EN 1367-1).Execution of accelerated aging and climatic tests under diverse environmental conditions. Duodsy R D D Uopfx Ahnou Features: ✔ Dual parameter control: temperature and humidity. ✔ Temperature range: approx. -30 °C to +70 °C. ✔ Humidity range: 20–95% (±1% accuracy within the appropriate temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments. ✔ 5″ color display: real-time clock and optional data logging via PC connection. ✔ Stainless steel internal and external structure: for long service life.Applications:Freeze-thaw testing on concrete and building materials: demonstrates how materials crack or degrade due to thermal cycling.Quality control of construction materials under laboratory conditions. Environmental and climatic tests where precise control of heat and humidity is essential.

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design Dedpfjttg S Ujx Ahnsuu KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Year of construction: 2025, condition: excellent (used), Well-maintained and hardly used leak testing device, Wöhler DP 700. Year of manufacture: 04.2025 Measurements: 145 Total operating hours: 7:09 Includes the accessories shown in the picture and: - Pack of 5 filter pads (new & sealed) Duedpfx Ahoyxtbfenou - 4m air measurement hose with adapter 0.3 DP700 (new & sealed) #8528

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Operating hours: approx. 11,889 h Year of manufacture: 2022 Recirculating Air Corrosion Change Test Chamber / Salt Spray Test Chamber For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 suitable for corrosion, salt spray, condensation water, and climate change testing applications. The unit is ideal for use in industry, research, development, and quality assurance. Technical Data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring flushing line Year of manufacture: 2022 Test chamber volume: approx. 1,450 liters Temperature / Climate Data: Temperature range (climatic test): +23°C to +70°C Humidity range: 20% to 98% r.h. Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation water test: ambient temperature +5 K to +42°C Electrical Data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant as per nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t LP max.: 17 bar g HP max.: 25 bar g Media Connections: Compressed air / GN2: max. 12 bar Deionized water: min. 3 bar / max. 5 bar Water connection for ring flushing line: max. 6 bar Condensate drain available Exhaust air connection available Power supply: 3/N/PE 400 V / 50 Hz Dimensions (according to drawing): External dimensions: approx. 3710 x 1537 x 1769 mm Test chamber length: approx. 2365 mm Loading height: approx. 850 mm Weight (according to nameplate): approx. 710 kg Operating hours (as indicated): approx. 11,889 h Equipment / Features: S!MPAC / WebSeason touch control panel Ethernet / Network connection USB interface Salt spray Condensation water test Dry climate Climate / humidity operation Ring flushing line Storage tank Rod inserts Control cabinet integrated Exhaust air connection Compressed air connection Connection for deionized water Water connection for ring flushing line Condition: used Unit is fully visible as per the images provided. Current status: external operating mode. Display notice: hood not closed. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the images Inspection by appointment is possible. Loading can be organised. (Technical data subject to change and errors excepted!) Duedpfey Hkg Iox Ahnou Further questions can be answered by phone.

Year of construction: 2021, condition: ready for operation (used), An automatic Lorenz filter test station for the automatic testing of filter media, half masks, canister filters, and medical face masks is available. Standards: EN143/EN149/EN14683/ISO16900-3 and more, module components: flow meter/photometer upstream and downstream of the test specimen/aerosol generator/suction and extraction unit, aerosols: paraffin oil/Emery oil/DOP/DEHS, volume flow range: 8L-300L/min, min. separation efficiency measuring range: 0.0001%, min. breathing resistance measuring range: 5Pa-1000Pa, max. filter air velocity: 10.2cm/s, max. test area: 237.8cm³. The device has been used little and would not need to be serviced. Documentation available. An on-site inspection is possible. The image is an example. Duedpey Tx Slefx Ahneu

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Dedpoy Avl Isfx Ahnjuu Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Duedpfoxqxw Tsx Ahnju Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S Dedpfxsxqxt Ij Ahnsuu The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction Dujdpfx Ahjy N Dyajnsu – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Year of construction: 2016, operating hours: 14,242 h, condition: excellent (used), Vötsch temperature test chamber, water-cooled Here we offer you a Vötsch temperature test chamber. Vötsch 7060-5 water-cooled chanber Test chamber dimensions: Height: 950 mm, width: 800 mm, depth: 800 mm External dimensions: Height 1995 mm, width: 1090 mm, depth: 1960 mm Test chamber capacity: approx. 600 liters Year of construction: 2016 Operational hours: 14 242 Entry ports: R1: NW 125 mm L1: NW 50 mm Data for temperature tests: Temperature range: -72°C to +180°C Temperature deviation in time in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature change rate Heating 6.0 K/min Cooling 6.0 K/min Heat compensation at 20°C max. 5000 W Heat compensation at -20°C max. 5000 W Duodpfxot Txqrs Ahnou Electrical connection: Rated voltage: 3/NPE AC 400V ±10% 50Hz Rated power: 13,0 kW Rated current: 23.0 A Refrigerant: R-404A and R-23 Weight (approx.): 650 kg The following information is for your safety as a buyer! 1. The chamber works perfectly. 2. No components have to be replaced. 3. Refrigerant is filled with legally compliant. Condition: used (excellent) (Changes and errors in the technical data, specifications are reserved!)

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Duodpfxsy El Tts Ahnou Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Dsdpsy Sv S Hefx Ahnjuu

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change Dujdpfxsy D Nyuo Ahneu - Prior sale reserved - For further information, feel free to contact us.

Condition: excellent (used), Memmert Type: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber from the manufacturer Memmert, model CTC 256. The unit originates from professional use and is ideally suited for laboratories, industry, research, development as well as quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climatic conditions. It enables both cooling and heating processes and – in this configuration – humidity control. This makes the unit perfect for material testing, aging tests, climatic stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time sequences can be set. The forced air circulation system ensures uniform temperature distribution in the chamber interior. Via the available interfaces, measurement data can be documented and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity control Electronic controller with programmable function Forced air system for even temperature distribution Internal protocol memory USB and Ethernet interface Additional 230 V socket Feed-through (side) Water container system (humidification/condensate) Mobile on castors Technical Data: Manufacturer: Memmert Duodpjy D Ni Aefx Ahneu Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see photo) Memmert CTC 256 climate test chamber Removable shelves Water canister Documents Delivery as shown (Specifications and technical data are subject to change and error!) If you have any further questions, we would be happy to assist you by phone.

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm Djdoy D T Sujpfx Ahnsuu axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Duodpoy E Ilxofx Ahnou Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Dedpoy Sl Uqjfx Ahneuu Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Dusdpfx Asy Dd Nqehnou Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min Dodpey Dclwefx Ahnjuu External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.