Used Hardness Test for sale (12,679)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. Lrjdpfxoxqxt Is Afuot - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: used, Year of construction: 2007, functionality: fully functional, load capacity: 210 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, This system is equipped with a KUKA KRC2 ed05 control unit and features the KR 210-2 2000 robot model. The robot offers a payload capacity of 210 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 KRC2 ED05 Payload: 210kg Lrsdpfx Afew H Nuqjust Arm Reach: 2700 mm or 3100 mm Condition: Used and tested Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Ljdpfx Ajx N Rvnjfusrt

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Precise Profile Measuring Instrument | Excellent Condition | Ready for Immediate Use For sale is a Chotest SJ-5760P, a high-precision contour measuring instrument designed for geometric profile analysis in quality management, toolmaking, mechanical engineering, and research. This unit provides accurate measurements with extended travel ranges and features a stable granite base for reliable results. — Condition • Pre-owned, technically inspected • Fully operational • Very well maintained — Technical Highlights – Chotest SJ-5760P Travel Ranges • X-axis: 0–200 mm Ljdpfsx Db Stjx Afuort • Z-axis: 0–450 mm • Device dimensions: 800 × 450 × 1100 mm • Weight: 220 kg — Profile Measurement (SJ-5760P) • Measuring range Z1: ±25 mm • Resolution: 0.001 µm • Measurement direction: Top / Down • Measuring speed: 0.05–5 mm/s • Positioning speed: X/Z up to 20 mm/s • Measuring force: 10–150 mN, adjustable • Guideway deviation: ≤1 µm / 200 mm Accuracy • X-axis indication error: ±(0.5 + 0.015L) µm • Z1-axis indication error: ±(0.5 + 0.05H) µm • Distance: ±(0.8 + 0.02L) µm • Radius: ≤(1 + R/15) µm • Angle: ≤±45’’ — Key Features • Ideal for precise contour and profile measurements • Extremely high vertical resolution (0.001 µm) • Very stable granite base for low-vibration operation • Large travel ranges for diverse component geometries • User-friendly and reliable measuring technology • Suitable for micron-accurate form measurement in both laboratory and production environments

Condition: ready for operation (used), Siemens 6FX1136-8BB00 880 BGR Multiport E-Stand: D SN: 13, used, good condition, 100% functional, delivery as shown in the photos. Lodpfx Afjx Dxc Nsujrt

Condition: ready for operation (used), Bosch CC 220 FARB-PL1.0-14" / control panel with color monitor SN:874965. The item has been checked and tested! Used, with normal signs of wear, 100% functional. Scope of delivery as per photos. Ljdpfx Afox Eqw Rsusrt

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Lrjdpfex Exmtex Afust Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: refurbished (used), functionality: fully functional, overall weight: 939 kg, total height: 785 mm, total length: 1,025 mm, total width: 355 mm, battery capacity: 620 Ah, battery voltage: 48 V, remaining battery capacity: 89 %, battery manufacturer: AIM, battery model: 48V 4PzS620, Forklift battery 48V 4PzS620 Battery 89% TESTED Year of manufacture: unknown Dimensions (LxWxH): 1225mm x 355mm x 785mm Weight: 939kg Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 552/620 Ah battery Remaining capacity: 89% Lsdex Hi Rlopfx Afuort With Aquamatik filling system (BFS) Supplied with pole screws but WITHOUT end cable

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 1,106 kg, load capacity: 240 kg, arm reach: 2,896 mm, The KUKA KR 240 R2900 ultra is a 6-axis robotic arm with a payload capacity of 240 kg and a maximum reach of 2896 mm. It is commonly used in industrial applications such as palletizing. Payload: 240 kg Maximum reach: 2896 mm Mounting position: Floor Working hours: 7243.27h Position repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Condition: Used & Tested Shipment does not include the price. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. Lredsw Iffyspfx Afujt ( Source: Kuka's Website )

Condition: used, functionality: fully functional, Used tensile testing machine, model Zwick Z2.5 Zwicki, equipped with new control electronics and Windows-based PM-Soft-Smart software for tensile, compression, and bending tests up to 2.5 kN. The testing machine has been retrofitted with a new control unit featuring an MFC controller and can be operated exclusively via PC. Connection to a standard PC or laptop is established via a USB cable. The PM-Soft-Smart Windows software is a highly versatile control and evaluation software, allowing the user to create any number of custom test programs. The delivery also includes a test specification created according to customer requirements. Suitable grips for virtually all testing tasks are available as accessories. Technical data: Single-column testing machine incl. 2.5 kN load cell Crosshead travel: 800 mm Test space depth: 100 mm Displacement resolution: 0.0001 mm Test speed: 0.2–1000 mm/min Power supply: 230V AC Dimensions (D x W x H): 414 x 320 x 1260 mm Weight: approx. 40 kg Lodpfsykpamsx Afusrt

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Lredpeylchtefx Afuet Control Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Maximum Swing: 457mm Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Z Axis Travel: 406mm ----- Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 Environmental Test Chamber is designed for laboratory applications that require testing of materials and components in a known environment. With its versatile capabilities and easy-to-use controls, this programmable unit can be used to simulate a variety of environmental conditions for scientific studies, product testing and process control. Data for temperature tests in single chamber operation Hot chamber: Temperature shock test chamber Test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation in space ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber Test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation in time in the middle of the usable space ± 1 K Temperature deviation in space 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Rate of temperature change (according to IEC 60068-3-5, measured in supply air) Heating 1.5 K/min Cooling 4K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 % , 50 Hz Rated power: 30 kW Lrsdpfx Afowbdv Seuet Rated power: 50 A Refrigerant: R-404a /R-23 Chiller: Water-cooled Weight: approx. 940 kg Year of construction. 1998 Test room dimensions: Width 770 mm x depth 650 mm x height 610 mm Housing dimensions: Width 1200 mm x depth 1800 mm x height 2050 mm TS 05 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2020, Good condition. Single module! Ask for additional information! Lrsdpfx Afowcrlkjuot

Condition: used, Description: Emission Test Chamber Manufacturer: Vötsch Model: VCE 200 Test chamber volume: 200 liters Temperature range: +20°C to +130°C Humidity range: 30 to 95% RH Temperature deviation: temporal ± 0.3 K Temperature deviation: spatial ± 0.5 K Ledpexg Hrqjfx Afujrt Average temperature change rate: cooling approx. 0.3 K/min, heating approx. 0.4 K/min Dew point range: +5°C to 60°C Humidity deviation: temporal ± 1 to 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power / rated current: 21 kW / 41 A Refrigerant: R404A Internal test chamber dimensions: 610 x 610 x 560 mm (W/D/H) Overall dimensions: 1250 x 1700 x 2350 mm (W/D/H) Weight: approx. 750 kg Item Condition: Used item as shown in the pictures Please contact us if you have any questions Shipping: The quoted shipping costs apply to deliveries within Germany Worldwide shipping available (please inquire for shipping costs outside Germany) The given shipping costs apply to shipping within Germany Sale exclusively to business customers, without warranty or guarantee. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use Lsdpfsxhfqnox Afusrt The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: used, Year of construction: 2009, functionality: fully functional, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Lredpfx Afexghlfouet Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.

Condition: good (used), Brüel & Kjær Vibration Test System 4812 + 4801 Shaker Technical Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonance frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm maximum • Acceleration limit: 981 m/s² • Bolt torque limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard-anodized aluminum Technical Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz Lsdpfx Afsxlz Uweuort • Cooling: Air-cooled (integrated fan) • Mounting height (without head): 370–405 mm • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 607 mm, travel distance Z-axis: 286 mm, controller model: Fanuc 32i A, grinding spindle speed: 30,000 rpm, The offer includes a CNC hard turning lathe with FMB automation! The machine is from year of manufacture 2013, but it was only commissioned in 2017 (showroom machine)! HARDINGE GT27SP GG-134HS TECHNICAL DETAILS X-axis travel: 607 mm Z-axis travel: 286 mm Max. spindle speed: 6,000 rpm Number of axes: 2 MACHINE DETAILS Control: Fanuc 32i A Dimensions & Weight Machine dimensions with robot cell (L x W x H): 4,600 x 1,600 x 2,700 mm Weight: approx. 2,100 kg Operating hours: 34,536 h EQUIPMENT MARPOSS measuring system MicroCentric 4-410-3-QC chuck Jäger HF spindle (spindle speed: 30,000 rpm) Oil mist filter S400 Spindle cooling possible FMB Unirobot LR Mate (Serial number: E-83200 (robot) / E15X36204 (controller), year of manufacture: 2015) Robot model: FANUC LR MATE 200iD7L-P2TB Controller: FANUC R30iB Max. part feed: 70 mm Axes: 6 Robot cell weight: approx. 1,000 kg GENERAL EQUIPMENT Knoll filter system KF110/500 (capacity: 500 l) Grinding spindle holder Grinding wheel arbor RINECK Reversing station in robot cell Feed conveyor for raw/finished parts 2,900 mm 2x MAS-MEX20-GT27-1-S385H adapters Lrjdsx I A Hpjpfx Afujt 2x MAS-MEX20 turn sleeves 2x MAS-turn rings 2x Hydro-expansion holders for internal turning tools Holder for turning tool + turning tool MARPOSS probe with holder

Condition: used, Year of construction: 1989, input - primarily 400 V three phases output - secondarily reversible - 230 V three phases - 400 V three phases Ljdpfx Afecw Twpjujrt - 525 V three phases - 660 V three phases power 50 KVA space requirements width - 800 x depth - 400 x height - 2,000 mm weight approx. 430 kg

Condition: used, total surface approx. 33,54 m² 6 plates 2,000 x 1,290 mm width of T-slots 30 mm thickness of the plates 95 mm Lodpfx Aec S R H Nefusrt weight approx. 1,700 kg per plate - price per plate -

Condition: used, Device tester, power supply -For: 15 V devices -Measuring range Lodpfx Ajcdlt Eofuert -Measuring current: max. A. -Dimensions: 233/225/H160 mm -Weight: 1.9 kg

Condition: good (used), The scope of delivery includes: 01x inlaid shelf grate, used Material color: hot-dip galvanized Total depth: 1.175 mm (supporting bar direction) clear support width: 1.097 mm Total width: 890 mm (cross bar direction) bearing bar dim.: 50/1.80 mm Frame height: 50 mm crossbar support: 40 mm Mesh size: 90 x 60 mm Weight: approx. 14,11 kg | pcs. Internal designation: GR-17 Remark: - The gratings may have damages, scratches, dents, welds. - The inserted shelf gratings are suitable in spite of the 40 mm crossbar support for a rack depth of upright depth of 1,200 mm. General information about the article: Lredpfxjnh Rb No Afust This item is offered for pickup only. A transport or shipment of this desired transport or shipment of this item is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module SN EA5615355 the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Lodjnkqywepfx Afujrt

Condition: ready for operation (used), Siemens 6FC3641-0AX SINUMERIK PRIMO SG complete control unit SN:A1495045, used, normal signs of use, 100% functional, scope of delivery as per photos Lrsdpfxjn Emz Is Afujt

Condition: used, Year of construction: 2001, functionality: fully functional, total width: 1,400 mm, total length: 3,500 mm, total height: 800 mm, overall weight: 7,500 kg, Measuring plate from CMM utilization with adjustable feet Lrjdpju Uiitefx Afujt