Used Hbc Radiomatic for sale (26)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Dkjdpfx Afoviwdmjfek Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Dkodpfotvau Asx Affek Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Dodpfx Afovf E Avefekk Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Dkedpfxsxtmyzj Affek Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Number of wires: 5

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires. Dodpfx Aexvh Dyoffjkk Bale press built: 1997 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Schneider PLC

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: Machinenummer 230067.020, pressing force: 60 t, power: 45 kW (61.18 HP), operating pressure: 250 bar, Bollegraaf Recycling Solutions, the original manufacturer of this mobile Bollegraaf baler, hereby offers the following machine(s) FOR RENT ONLY: Year of construction: 2022 Weight excl trailer: 22.000 kg Mobile Baler Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Dkodpfjh I T Ibex Affjk Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. This is an HBC60 (30kW) baler with vertical binding. This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Technical condition is very good! (the baler has only baled paper) Dodeyux Nxjpfx Affskk This baler comes with the following options: * intermediate hopper + distributor * belt feed chute * bale discharge, * wire roller platforms

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) 390mm supports Intermediate hopper Conveyor chute Platform with caged ladder Additional photocells Frequency controller for the main motor for energy savings APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Dkedpfx Afoxvh Ewjfok Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Condition: reconditioned (used), Year of construction: 2014, operating hours: 24,967 h, functionality: fully functional, machine/vehicle number: 004283-0030, pressing force: 122 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, warranty duration: 24 months, year of last overhaul: 2026, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC120s (90kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. Dkedpfx Aoxcir Eeffek This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. Dsdpfotvat Tox Affekk After refurbishment, this baler is sold with a 2-year warranty.

Condition: used, mileage: 115,034 km, power: 301 kW (409.25 HP), first registration: 11/2001, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, Very well-maintained MAN FE 410 suction and flushing combination body from Assmann with a water treatment system and radio remote control, as well as a box boom, a Wittig vacuum pump with a Uraca high-pressure pump (P3-45) - Assmann combination suction and high-pressure flushing unit - Water treatment (recycling) - Type: 11.0/229 P-WRG III Dkodpfx Afjyxcnnjfek - Wittig Aqualine 2100 vacuum pump, approx. 1700 cbm/h, 200 bar. - Uraca P3-45 HD pump with 346 l/min - Pneumatic piston extension - Combination cassette boom - HBC radio remote control - 6x4 drive axles - 11,200 liter tank capacity - German vehicle from 1st owner - Leaf spring suspension - Air-suspended cab - Cruise control - Differential locks - Radio - Electric windows - Double H gearshift - Financing is available through our partner banks; we are happy to assist you. We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend an inspection and testing to ensure that the buyer is not misled about the condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired.

Condition: used, overall weight: 16,000 kg, first registration: 01/1999, loading space length: 5,394 mm, loading space width: 2,489 mm, loading space height: 2,576 mm, Year of construction: 1999, Equipment: crane, 2X AVAILABLE FASSI CRANE ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST 2X AVAILABLE / 1X FASSI CRANE / 1X ATLAS CRANE ----VEHICLE FEATURES ----VEHICLE DATA CRANE PLATFORM LOAD POINTS APPROX. 5.86 M CRANE INSTALLATION FASSI CRANE MODEL F125A24 MMAX 175 kNm MAXIMUM LIFTING CAPACITY AT 2.7 M LENGTH: 5600 KG MAXIMUM LENGTH OF 19.25 M WITH 600 KG LIFTING CAPACITY CRANE OPERATED BY SEPARATE ENGINE INTERIOR DIMENSIONS 5.4 M LENGTH 2.57 M HEIGHT 2.49 M WIDTH REMOTE CONTROL FOR THE CRANE AVAILABLE HBC - RADIO CONTROL SYSTEM 701 SPECTRUM ----EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATE AND 17 - 21 DAYS AUSTRIAN PLATE EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 is required. Modifications, errors, and prior sale excepted! You can find more vehicles on our homepage: Sale is subject exclusively to our Terms & Conditions – see homepage. Dkedpfxeyi N S Hs Affek Important Note – Important Information: Despite carefully checking all details in our offer, errors may occur. Some are caused by transmission errors in the systems of various platform providers. Therefore, we point out that all details are provided without guarantee and do not constitute any legal claim. Legal Notice: This sales listing does not constitute an offer within the meaning of §145 BGB. Instead, it is information to initiate a contract. The details provided here are without guarantee and do not represent warranted characteristics.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) Dedpfowruw Isx Affjkk * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: used, mileage: 16,200 km, power: 390 kW (530.25 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 12 m³, Equipment: ABS, air conditioning, navigation system, parking heater, Service book maintained * Trailing axle unloadable and liftable. ---- Suction excavator MTS DINO12, container volume approx. 12 cbm, stainless steel lining, hydrostatic drive Hydrostat (suction+drive+steer), PLC control with prepared remote diagnostics, radio remote control, HIGH-TIP high tipper with 4 supports, POWERARM strength arm with 7m suction hose, movable strength arm EVO-POWER ARM GEN2, rotary suction pipe system IKE/PERFOR, MTS double fan Power+, HBC control, Industrial Package I: grounding system, Industrial Package II: gas sensor, MTS material separation system, automatic filter cleaning, high-pressure water system 30 l/min, dirty water pump, digital turn assist. ---- * Front axle 9.0 t * Trailing axle, 9 t, steered, unloadable, liftable * Axle ratio i = 4.571 * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Wheelbase 4,200 mm * Driver suspension seat, comfort * Air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Roof hatch/ventilation flap on roof * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pin * Reverse warning combined with hazard warning lights * M-cabin (medium length) * ClassicSpace M-cabin, 2.30 m, tunnel 170 mm * Sun visor outside, transparent * Compressed air horn * MirrorCam * Bumper, center part towing eyes, coupling mouth * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Automatic transmission * Mercedes PowerShift 3 * Driver’s seat heating Dkjdpfowruw Uex Affjk * Wheel formula 8x4 ENA * 32.0 tonner * Air suspension, rear axle * Navigation system * Axle load measuring device * Tank 430 liters * AdBlue tank 60 liters * Fog lights, LED daytime running lights * 2 LED rotating warning beacons * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 HP), 2600 Nm * Engine version Euro 6, E * High Performance Engine Brake * Gearbox oil cooling * Engine PTO rear, c, hydraulic pump ISO 7653D * Front spring 9.0 t, 4-leaf * Tow coupling, rear, Ringfeder * Aluminum rims 9.00 X 22.5 * Aluminum rims 11.75 X 22.5, front axle * Aluminum rims 11.75 X 22.5, trailing axle * Cruise control * Weight variant 37.0 t (9.0/10.5/10.5/8.0) * ATS warranty according to terms and conditions, 3 years/250000 km * Refrigerator on engine tunnel * Storage box * EBS * Without spare wheel ---- Sale only to commercial customers! No guarantee for the information! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing option.

Condition: used, mileage: 458,836 km, power: 340 kW (462.27 HP), first registration: 09/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 36 m³, loading space length: 4,000 mm, loading space width: 2,476 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, * CD radio * Bluetooth / navigation / DAB+ * Car phone * Air conditioning * Multifunction steering wheel * Auxiliary heater (parking heater) * Cool box * Additional headlights * Air horns * Rotating beacon * JBL sound system ----* Adaptive cruise control (ACC) * Lane departure warning system (LDWS) * Emergency braking assistant (AEBS) * Tire pressure monitoring system Djdpfx Aoyvx Avjffokk * Retarder ----* Leaf/air suspension * Hill start assist * Rear axle differential lock * Spray suppression * Jaw-type trailer coupling * Hydraulic connections for trailer operation ----MEILLER three-way tipper body* Bordmatic tailgate * MEILLER hydraulic system with extra features ----ATLAS AK126.3E - A3L* Articulated boom * Fully hydraulic drive * HBC Spectrum 2 radio remote control * Dual hydraulic stabilizers * 410° slewing range * Load cut-off * Lifting capacity at 1.98 m = 5550 kg * Lifting capacity at 12.21 m = 830 kg * Year of manufacture: 2016 * Inspection: 03.03.2023 ----* Front axle tire size: 385/65R22.5 * Rear axle tire size: 315/80R22.5 * Fuel tank: 480 liters * AdBlue tank: 65 liters * Gross vehicle weight: 20,500 kg * Curb weight: 11,990 kg * Permissible trailer load: 24,000 kg * Overall length: 7,525 mm * Wheelbase: 4,200 mm * Inspection due: 04.2026 ----Vehicle number: 11936----Errors and prior sale excepted----Advertising and various decals have been digitally removed.-----We are happy to assist you with all formalities involved in the purchase of a vehicle. Simply let us know your requests and suggestions and we will take care of them. Among other services, we can offer the following at an additional cost:----Trade-in of your old vehicle TÜV/inspection approval Complete export processing Financing arrangements Application for export plates Vehicle transfers Vehicle registration Recovery and vehicle transport----YOUR VTS TEAM

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system Dkjdpfx Aeyt Idveffek The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting.

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Dksdpfx Ajxbgnhsffok Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, overall weight: 16,000 kg, first registration: 01/1999, loading space length: 5,394 mm, loading space width: 2,489 mm, loading space height: 2,576 mm, Year of construction: 1999, BRIDGE CRANE? 2X AVAILABLE ? FASSI CRANE ? REMOTE CONTROL ---- VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE ON REQUEST Dsdsya Sbfjpfx Affekk 2 UNITS AVAILABLE / 1X FASSI CRANE / 1X ATLAS CRANE ----VEHICLE EQUIPMENT ----VEHICLE DATA CRANE PLATFORM MOUNTING POINTS APPROX. 5.86 M CRANE STRUCTURE FASSI CRANE TYPE F125A24 MMAX 175 kNm MAXIMUM LIFTING CAPACITY AT 2.7 M LENGTH: 5,600 KG MAXIMUM REACH: 19.25 M WITH 600 KG LIFTING CAPACITY CRANE OPERATED BY ITS OWN ENGINE INTERNAL DIMENSIONS 5.4 M LENGTH 2.57 M HEIGHT 2.49 M WIDTH REMOTE CONTROL FOR CRANE AVAILABLE HBC - RADIO SYSTEM 701 SPECTRUM ----EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 30 DAYS PLATES, AND 17 - 21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 is required. Modifications, errors, and prior sale reserved! More vehicles can be found on our homepage: Sale is exclusively in accordance with our GTCs – see homepage Important note – Important information: Even though all details in our offer are checked carefully, errors may occur. Some of these may be due to transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes to initiate a contract. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Dedpfx Asw H S Aveffskk Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Modifications can be offered separately.

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction Djdpexx Am Usfx Affjkk - 4 pairs of main log drive wheels - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts - Hydraulic lowering of the milling head - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW - With HBC radio remote control

Condition: like new (used), Year of construction: 2018, HÄWA Debarker Dkedpfx Afjdwidwsfjk -Type H256 / 800 - Made from a heavy welded steel construction - 4 pairs of log drive wheels - 1 split, toothed pair of log drive wheels - Log drive frequency-controlled - Milling arm made from heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and runner ring - Milling head equipped with carbide tools - Hydraulic lowering of the milling head - Milling head feed frequency-controlled - Log drive wheels 800mm - Log diameter: 0.2m – 1.0m - Log length: 1.0m – 6.0m - Total connected load: 35kW - With HBC radio remote control - Immediately available - Year of manufacture: 2018

Condition: used, functionality: fully functional, gearing type: other, fuel type: electric, color: red, overall weight: 40,000 kg, lifting power: 16,000 kg/m, lifting height: 70,000 mm, DGUV certified until: 08/2025, Year of construction: 1985, Equipment: crane, Stationary ship crane – fully operational – with modern hoist unit renewed in 2020 For sale is a stationary crane, previously used as a ship crane at the Hamburg Marina. The crane is fully functional and has been regularly maintained. Features & technical details: - Stationary crane suitable for lifting boats and ships - Hoist/winch renewed in 2020, equipped with: - Frequency control - HBC radio remote control - Electronic load limit set at 16 t - Installed winch structurally rated for up to 40 t The crane is being taken out of service due to the lack of a static approval for the concrete bridge at its current location, not due to any technical defects. The crane is ideal for locations where sufficient foundation or bridge load capacity is ensured. Dksdox Hv H Hjpfx Affsk Location: Hamburg Marina, Deichstrasse 19, 22880 Wedel, Germany For more information, technical data, or to arrange a viewing appointment, please get in touch.

Condition: used, mileage: 10 km, first registration: 02/2025, axle configuration: 3 axles, emission class: euro6, Truck-mounted concrete pump Zoomlion 38X-5Z, for sale / for rent * Distribution boom: * Reach height 38m * Folding type/kink type 5-part Z-fold * Reach 32.36m gross * Reach depth 25.20m * Unfolding height 7.5m * Delivery lines type DN 125, max 85 bar * Length of end hose 3m * Swivel range 365 degrees * Pump unit: * Max. output Max. 170 m3/h * Pressure on the ground side 85 bar * Delivery cylinder 260mm * Stroke 2100mm * Strokes per minute 25 * Support system: * Full support front and rear 6.19m and 7.7m OSS 4.18m and 4.96 FS 2.17m - 6.19m, 2.27 - 7.7m * Total length 11.02m * Height 3.95m * Configurations: * Diesel tank in support 600 liters * Water tank 550 liters * Water pump 70/15 liters/bar * High pressure pump 15/200 liters/bar * Delivery cylinder - hard chrome-plated * Feed hopper with vibrator and covered by aluminum cover * Wear plate hard metal * S pipe wear-resistant * Pipe double-walled * End hose squeezer * Storage option for hoses or pipes aluminum trays on both sides * Support aids 8X squared timbers with storage option * Radio remote controls 2X consisting of 1X HBC and 1X Zoomlion * Safety: * Fully flexible support monitoring * Warning light in the danger area * 360 degree camera system * Emergency pump control * Mast package controlled with vibration damping (EBC) * Up and Folding with a joystick * various pump system controls * Chassis Daimler Benz Type 26/43 * Axle ratio 6x4 Dodpfxeyuymxe Affjkk * Wheelbase mm 4800 * Emissions class Euro 6

Condition: excellent (used), Used steel hall 36.5 x 13.5m, eaves height from finished floor approx. 9.8m, pitched roof 3° roof pitch, top running rail for setting up the overhead cranes from FF approx. 8.5m, 2 10t cranes were originally mounted in the existing hall. Steel construction incl. roof and wall beams, crane runway, without wall panels, windows and doors... as to be inspected. Base plates must be newly constructed on site. Dkjdpfxspqx I He Affek Pricing 102tsd€/net Hall free loaded ex location 56759 Kaisersesch Additionally we offer: 2 pieces Demag single girder overhead traveling cranes 10t x 12000mm lifting height from finished floor approx. 7,5m, lifting speeds 4/0,8m/min, trolley travel speeds 20/5m/min, crane travel speeds 40/10m/min. The cranes are handed over in top condition after workshop inspection and each with new HBC Micron 5 radio control, optical shutdown against each other. Pre-shutdown at the end of the trolley and crane runway in each case Pricing 24tsd€/net Crane free loaded ex location 56759 Kaisersesch New power supply for on-site installation along the crane runway 36m, 4-pole, 15qmm, in set with crane main switch, 4000€/net Plans and statics are not available must be prepared by the buyer. Pricing in a package for everything together free loaded 130000€/net VHB

Condition: new, functionality: fully functional, Year of construction: 2016, lifting height: 12,800 mm, overall weight: 53,000 kg, load capacity: 50,000 kg, lifting speed: 6,400 mm/s, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Two bridge crane runways: 1) 50 t, span 23 m, lifting height 12.8 m 2) 25 t, span 23 m, lifting height 15.0 m 3) 3.2 t maintenance and assembly hoist, lifting height 20 m Dkjdpfx Afjxyyi Njfsk HBC radio remote control