Used Heated for sale (15,449)

Condition: good (used), Year of construction: 2015, Approx. 4–5 units of plate heat exchangers, Hydac, H28A-ST16 – used: Hodpfez Sdzyjx An Nsfn Price per unit, ex works: €350.00 (net)! Manufacturer: HYDAC Heat exchanger type: H28A-ST16 Year of manufacture: 2015 Material number: 4082764 Production number: SD 23701 Rated output: 231 kW Heat transfer area: 4.65 m2 Minimum length: 96 mm Max. operating pressure: 10.0 bar Max. test pressure: 13 bar Volume, primary side: 6 liters Volume, secondary side: 6 liters Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Year of construction: 2017, condition: good (used), Spirax Sarco PHS Easiheat Heat exchanger system 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec Hfodpfxoz I Dv Hj An Non

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Hfjdpfxoxbgrgj An Nsn Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: used, functionality: fully functional, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) This state-of-the-art 4-pipe heat pump has been specifically developed for the flexible, simultaneous or independent provision of chilled and hot water. Thanks to cutting-edge inverter technology and the environmentally friendly refrigerant R290, the unit offers maximum energy efficiency with a minimal environmental footprint. The device features robust enclosure panels and integrated sound insulation in the compressor compartment to ensure extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the unit is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit • System type: 4-pipe unit Intelligent operating modes for maximum energy savings • Flexible 4-pipe logic system: Complete hydraulic separation of air conditioning and domestic hot water (DHW). The control system regulates the pumps fully automatically as needed and allows for exclusive DHW activation via a digital input. • Highly efficient combined cycle (simultaneous operation): • In cooling mode: When DHW is required, the system utilizes complete heat recovery. It provides free hot water while the fan stops. • In heating mode: The system prioritizes DHW production and automatically switches back to room heating once the setpoint is reached. Hfsdpfx Aez Ix D Son Nen • On-demand individual operation: Efficient single-mode operation for cooling, heating, or hot water only, with precise inverter control to avoid partial load losses.

Condition: excellent (used), Used, electrically heated stainless steel tank / transport container Last use: Chemicals Item number: 10907 Volume: 1000 L Type: Upright, mounted on a stainless steel frame Material (in contact with medium): 1.4301 / AISI304 Design: With electric heating Hodpfx Ajz Ixgysn Nofn Bottom: Curved Top: Curved Operating pressure according to nameplate: 0.30 bar Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 240 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Features: Nameplate: Yes Outlet valve: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 433 kg

Condition: used, Used, electrically heated stainless steel tank / transport container Last application: Chemicals Article number: 10908 Volume: 1000 L Type: Standing, in a stainless steel frame Material (in contact with media): 1.4301 / AISI304 Design: With electric heating Bottom: Arched Top: Arched Operating pressure according to nameplate: 0.30 bar Hfedpfjz Ixg Hex An Non Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1675 mm Distance from outlet to bottom: 200 mm Manhole: 400 mm Materials: Inside: 1.4301 / AISI 304 Frame: Stainless steel Equipment: Nameplate: Yes Outlet type: Disc valve Outlet diameter: DN50 Electric heating Empty weight: 325 kg

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. Hfodpszrg T Eofx An Nen *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, smoke pipe connection diameter: 200 mm, nominal heat output: 55 kW (74.78 HP), Offering a used HDG heating boiler with a heating capacity of 55 kW for collection. The boiler was manufactured in 1995 and is in excellent working condition. Hfsdpezxf Hwefx An Njn It can accommodate logs up to half a meter in length.

Condition: excellent (used), Year of construction: 2006, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 5648400, fuel: liquefied natural gas (LNG), FOR SALE – WEISHAUPT G60/2-A ZM-NR Industrial Gas Burner – 6.1 MW Weishaupt G60/2-A ZM-NR industrial gas burner, manufactured in 2006, complete with gas train/rail and control cabinet. Professional heavy-duty industrial burner suitable for large boilers, steam boilers, thermal oil systems, dryers and other high-capacity industrial heating applications. Technical specifications Manufacturer: Weishaupt / Max Weishaupt GmbH, Germany Model: G60/2-A Version: ZM-NR Year of manufacture: 2006 Serial / factory no.: 5648400 Fuel: Natural gas Burner capacity: 800 – 6,100 kW Minimum gas connection pressure: 100 mbar Maximum gas connection pressure: 4,000 mbar NOx class: 2 Electrical supply: 380 V / 3 phase / 50 Hz Electrical power: 16.59 kW Protection rating: IP40 Manufactured in Germany CE marked Included in the sale Operating hours caa. 20,000 hours Complete burner package including: Weishaupt G60/2-A ZM-NR burner Gas train / gas rail Control cabinet Burner control and electrical components Associated fittings/components visible with the burner The burner is currently installed on an industrial boiler and can be inspected in its installed condition. Condition Used industrial equipment in good overall physical condition considering its age. The burner has been installed in an industrial application and is being removed as part of a system replacement. Inspection is welcome before purchase. The buyer is welcome to inspect the equipment and verify the technical condition and included components before removal. Removal / transport The burner is dismantled for transport. Loading and transport can be arranged by agreement. International buyers and export inquiries are welcome. price 8500 + VAT Price negotiable for serious buyers. Located in Slovenia, EU. Weishaupt G60/2-A ZM-NR industrial gas burner, built in 2006, complete with gas extractor and control cabinet. Professional high-performance industrial burner suitable for large boilers, steam boilers, thermal oil systems, dryers and other high-performance industrial heating applications. Technical data Manufacturer: Weishaupt / Max Weishaupt GmbH, Germany Model: G60/2-A Version: ZM-NR Year of manufacture: 2006 Serial/factory no.: 5648400 Fuel: Natural gas Burner power: 800 – 6,100 kW Hfsdpfx Anezx R U Tj Nsn Minimum connection pressure: 100 mbar Maximum connection pressure: 4,000 mbar NOx class: 2 Power supply: 380 V / 3-phase / 50 Hz Electrical power: 16.59 kW Protection class: IP40 Made in Germany CE marking Scope of delivery: Operating hours approach. 20,000 operating hours Complete burner package included: Weishaupt G60/2-A ZM-NR burner gas pipeline control cabinet Burner control and electrical components Associated fittings/components (visible on burner) The burner is currently installed on an industrial boiler and can be viewed when installed. Used industrial plant in good condition, appropriate to its age. The burner was used in an industrial application and is being dismantled as part of a system renewal. Viewing requested before purchase. The buyer can inspect the plant before dismantling and check the technical condition and the components included. The burner is dismantled for transport. Loading and transport can be arranged by arrangement. International buyers and export requests are welcome. 8500 € + VAT Price negotiable for serious prospects. Location: Slovenia, EU.

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Hfedpfx Aez Ru Erjn Nen Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Hfsdpfsz Ruxlex An Njn Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Tube in Tube Legth: 13 meters including bends

Condition: used, Year of construction: 2009, power: 800 kW (1,087.70 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 11,700 kg, nominal power: 800 kW (1,087.70 HP), input frequency: 50 Hz, input current: 950 A, ambient temperature (max.): 30 °C, We are offering this used Jenbacher JMS 412 GS-N.TE combined heat and power (CHP) unit, manufactured in 2009. Hfodpfxsz Ehc Ej An Nsn Type: JMS 412 GS-N.TE Serial number: 6289001 Year of manufacture: 2009 Rated power: 800 kW Power factor: 1 Maximum operating altitude: 150 m Maximum ambient temperature (intake air): 30 °C Rated frequency: 50 Hz Rated voltage: 400 V Rated current: 950 A Weight: 11700 kg Performance class: G2 The unit was only operated at 555 kWh by the previous owner, but we used it at 800 kWh. According to the data sheet, it is designed for 800 kWh operation. We operated the unit with natural gas. We are selling the complete unit in a soundproof container, including the exhaust heat exchanger and chimney. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, We are offering two new Totem 20 combined heat and power (CHP) units, as well as a new Totem 10 CHP unit, manufactured in 2016. These CHP units are from a warehouse clearance. According to the previous owner, the units are eligible for CHP subsidies, as they have never been installed. However, this must be verified independently. Hfodpoytympjfx An Nen The TOTEM 20 generates a maximum of 20 kW of electricity and 48.5 kW of heat. The TOTEM 10 generates a maximum of 10 kW of electricity and 25.2 kW of heat. Please refer to the uploaded data sheet and operating manual for all other technical specifications. Depending on the location, the CHP units can also be delivered to Germany or Austria. The price for the Totem 10 is €6,000. The price for the Totem 20 is €7,000. The current list price for a new Totem 20 is approximately €57,000 gross, and they are being sold for around €45,000 (see photo). If you have any questions or require further information, please send us a message or call us. We offer a start-up guarantee in the form of a return policy in case of any issues, but we will not cover any costs incurred.

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the universal solution for every application. The display is user-friendly. Hedpsziivqsfx An Nefn Intended use: This heat sealing press is particularly suitable for industrial applications where precise temperature control and the ability to use smaller sealing plates (140 x 140 mm) are required. Common applications include applying patches, transfers, or embroidery to textiles. Special features: Robust and durable: The machine is designed for intensive use and is popular in both the textile industry and other industries that require high volumes with medium to high temperature processing. High flexibility: The temperature range of 25 to 210 °C and the adjustable timer of 1 to 240 seconds provide flexibility for a variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat sealing press with the following technical specifications: Technical data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (millimeters): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: used Scope of supply: (See picture) (Subject to changes and errors in the technical data and information!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Hfsdpfoz N H D Djx An Nsn Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, manufactured in 2018, hot water system, output 550 kW, underfeed firing with a moving grate, including pneumatic cleaning, including infeed auger with backfire protection, including multi-cyclone separator mounted directly on the heat exchanger, including ash removal with an auger, including control system, the system is fully functional! Including electrostatic precipitator, brand Meister, matched to the system, including ash removal for the electrostatic precipitator, including control system for the electrostatic precipitator, including flue gas fan. Hsdpovgf Ibefx An Nefn The system is being sold due to connection to a district heating network. Dismantling can be included as part of the offer.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Hfjdpfxszxqd Is An Njn Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG73/D K/RT50 Temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial use in plastics processing, especially for temperature control of injection molds and other process tools. Serial No.: 102010690002 Year of manufacture 2010 Temperature max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 60 l/min. Hfodpoz N H Dwjfx An Nen Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooler) Motor power of the pump: 1 kW Continuous sound pressure level

Year of construction: 2024, condition: used, Manufacturer: Ziemex Processing Equipment Year: 2024 Model: Z-compact Hsdpfx Ajz Iubmen Nsfn Serial number: 1403204 Type: Welded plate heat exchanger Material: 1.4404 stainless steel (316L) Fluid: Oil (circuit B) / Water (circuit A) Circuit B volume: 59 L Circuit A volume: 6 L Permissible pressure: 0 to 6 bar Permissible temperature: 0 to +200 °C (circuit B) / 0 to +110 °C (circuit A) Test pressure: 9.5 bar (circuit B) / 8.7 bar (circuit A) Fluid group L1G GR2 Heat exchange surface area: 4.2 m² Unladen weight: 142 kg The Z-compact® welded plate heat exchanger combines the thermal efficiency of a plate heat exchanger with the mechanical robustness of a shell-and-tube heat exchanger. L'échangeur de chaleur à plaques soudées Z-compact® allie le rendement thermique d'un échangeur de chaleur à plaques à la robustesse mécanique d'un échangeur de chaleur à calandre et tubes. Under equivalent operating conditions, the Z-compact® offers better heat transfer than a conventional tube-and-shell heat exchanger. Its heat transfer surface is more efficient and its pressure drops are lower.

Condition: used, pressure: 5.5 bar, input voltage: 230 V, nominal heat output: 380.2 kW (516.93 HP), heating capacity: 373.8 kW (508.23 HP), temperature: 110 °C, tank capacity: 680 l, input frequency: 50 Hz, operating pressure: 5 bar, We are offering this used Buderus Centra 1740 B2 heating and fan unit, year of manufacture unknown, for sale. Hjdpfx Anoz Eiwdo Nsfn Maximum firing heat output Qn (H): 373.8 kW Nominal heat output Pn 50/30 °C gas: 366.0 kW Nominal heat output Pn 80/60 °C gas: 380.2 kW Nominal heat output Pn 50/30 °C oil: 364.8 kW Nominal heat output Pn 80/60 °C oil: 364.8 kW Operating pressure pMS: 5.5 bar Test pressure PT: 7.9 bar Maximum temperature Tmax: 110 °C Volume: 680.0 l Nominal voltage: 230 V Nominal frequency: 50 Hz Nominal current: 10.0 A If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2001, operating hours: 123 h, functionality: fully functional, power: 350 kW (475.87 HP), Type: Mawera FU350RIA, fully automatic wood chip heating system with underfeed firing system. Output: 350 kW. Domestic hot water system with a maximum supply temperature of 95 °C. Year of manufacture: 2001. Hfodpfxozwuxgs An Non Components: Boiler (combustion chamber and heat exchanger), automatic feed auger, ash separator, flue pipes, flue gas fan, documentation, LOGIC control system, electrical control cabinet. Inspection possible in Upper Austria after prior appointment, in disassembled condition. Already disassembled, ready for immediate loading.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Hfedpfx Aozpy Idjn Njn Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: new, functionality: fully functional, Year of construction: 2026, power: 35.3 kW (47.99 HP), Highly efficient 4-pipe heat pump with R290 (propane) (EXAMPLE) This state-of-the-art 4-pipe heat pump was specifically designed for the flexible, simultaneous, or independent provision of both chilled and hot water. Thanks to the latest inverter technology and the environmentally friendly refrigerant R290, the system offers maximum energy efficiency with a minimal environmental footprint. The unit features robust cladding panels and integrated sound insulation for the compressor compartment, ensuring extremely quiet operation. Equipped with a factory-integrated hydraulic kit (1 pump) and a 100-liter buffer tank, the system is ready for immediate operation and can be seamlessly integrated into complex building systems. Key technical data at a glance: • Cooling capacity: 14.1 – 35.3 kW (modulating) • Heating capacity: 19.2 – 39.5 kW (modulating) • Refrigerant: R290 (propane – future-proof and GWP-compliant) • Compressor configuration: 1 highly efficient, semi-hermetic reciprocating compressor / 1 refrigeration circuit Hfjdpfx Anoz Nvkas Non • System type: 4-pipe unit Credit brokerage and advice are provided by KREDIT DE AG. Representative example according to § 17 PAngV: Basis for calculating the stated rate (assuming creditworthiness): Net loan amount €35,000.00, 7.10% fixed interest rate, 7.20% per annum effective annual interest rate, 96 months term, total amount €45,976.68, monthly installment €478.92.

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,000 kg, heating capacity: 198 kW (269.20 HP), large warm air furnace for firewood and residual materials External dimensions approx. 3.5 m x 1.5 m x 3 m Weight 4 t with control system Hodjw Ucfdjpfx An Nofn with warm air blower

Condition: used, GH Induction Type: 30 SMBC Hfjdpfjzdp H Sex An Njn Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, ease of operation, and high efficiency) in a series resonant circuit and a compact design, with cooling integrated into the generator cabinet. Rittal generator cabinet and GH Induction TC150/2 resonant circuit Voltage 400V, Frequency 50 Hz, Current 56 A, Power 37.5 KVA In like-new condition! Scope of supply: Transistor generator, Rittal generator cabinet with cooling, and TC150/2 resonant circuit (Subject to changes and errors in the technical data; specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.