Used Hook Making Machine for sale (70,613)

Condition: used, Year of construction: 2009, Roll production line WP Multimatic MUS Rollmeister SC 51 Hnedpfx Aez A Sd Iek Usu Year of manufacture: 2009 Suitable for sliced rolls, round rolls, and long rolls Maximum hourly output: approx. 5,100 pieces Weight range (without proofing): 30-90g Weight range (sliced rolls): 40-65g Pre-proofing cabinet I (before long rolling): 6 minutes Pre-proofing cabinet II (after long rolling, before cutting): 6 minutes Dough divider and rounding machine Multimatic MUS, 4-row Pressure roller on spreading belts after the head machine Long rounding station Pressure roller before the cutting station, height-adjustable Cutting station Bypass for green operation without proofing cabinet Discharge device for Euro pallet sizes With heating and humidification With tunnel dryer

Condition: refurbished (used), Year of construction: 2023, COLD FORMING CARLO SALVI 550/SV Completely Refurbished by HBR srl Possibility of having the version RF (with semitubular group). Machine with quick change system on K.O. cams. Range production: min. and max. wire diam.: 2 - 4,76 mm. max. cutoff length: 65 mm. max shank length: 50 mm. Hnedpfx Aksqhndme Uou max production per min: 500 Motor Power: HP 7,5

Condition: excellent (used), Year of construction: 2001, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 361-006203, total length: 8,300 mm, total width: 1,700 mm, total height: 3,000 mm, input voltage: 400 V, overall weight: 3,400 kg, power: 10 kW (13.60 HP), Lisec VL-1N/20 sealing robot, year 2001, for double and triple glazing, consists of the following: RTVN-15/20VFE, sealing robot infeed conveyor with glass unit measuring device (glass and spacer frame) Hnedpfxex Syhlj Ak Ueu VL-1N/20, sealing robot, for sealing double and triple units up to a total unit thickness of 52 mm and unit size up to 3.5 x 2.0 m The machine is in good condition. It has been installed and operational with us since 2013. Regularly serviced and fully functional. Inspections in operation are possible until 28.02.2026. It will then be dismantled and ready for sale (loading). The machine is available for collection from 01.03.2026.

Condition: used, Manual sealer Reinhardt Hodsyf Eb Nepfx Ak Uonu

Condition: excellent (used), Egg layer Zenith 912 for palisades production. Moulds: - palisade 60cm - palisade 80cm - palisade 100cm Hedjz Nfw Aopfx Ak Uonu - palisade120cm Very good condition

Condition: ready for operation (used), A bottom-seal bag/sack welding machine Stiegler is available. Film width: 1050mm, section length range: 90mm-650mm, max. operating cycle: 140/min, max. film web speed: 80m/min, max. roll diameter: 800mm, max. web speed: 60m/min, core diameter range: 76mm. Machine dimensions X/Y/Z: approx. 6000mm/1700mm/1600mm, weight: approx. 3400kg. Including 2 welding bars, punching device and Euro hole punching. The edge control of the machine is defective. Documentation available. An on-site inspection is possible. Hnsdpoy D Trzefx Ak Ueu

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Hedozqt Dnepfx Ak Ujnu Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: ready for operation (used), Year of construction: 1991, A W+D envelope manufacturing line is available. Blank length range: 265mm-653mm, blank width range: 214mm-726mm, max. production output: 450/min, paper weight range: 80g/m²-150g/m², max. paper roll diameter: 1500mm, max. paper roll width: 686mm, window reel width range: 30mm-490mm, window material section length range: 55mm-280mm. Documentation available. An on-site inspection is possible. Hedpfeyyy Nljx Ak Usnu

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, type of input current: three-phase, overall weight: 1,000 kg, König Rex T5S Depositing Machine Depositing machine for dough portions and forming machine robust technology weight range approx. from 30 to 85 grams Hsdpfx Aoyaklisk Uenu with discharge conveyor connection 400V, 16A-CEE plug used machine Visit our large bakery machine warehouse!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 380 V, For sale: pasta divider and long-forming machine in excellent condition. Dividing range: 25-140 grams. Recently serviced and ready for use. Original machine manual and complete documentation are available. Hnjdpfxoz Dx Ayo Ak Uou

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Hodpfxjxxb Rrj Ak Uenu Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Rotating sealing table More technical information can be found attached as Tech. data file Hjdpfx Aszzw Nvek Uenu Good and clean condition As is Available immediately

Condition: refurbished (used), WP Formprofi Hedpetrwfujfx Ak Uonu

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Hnsdpfx Akoztrpnj Uou

Year of construction: 1990, condition: good (used), Great condition. 900 nails per minute. Minimum diameter of wire 0.7 mm Maximum diameter of wire 1.4 mm Minimum length of nail 6 mm Maximum length of nail 35 mm Oil consumption 0.1l/ 8 hours Total weight 540 Kg Hjdpfx Asfmgrysk Usnu

Year of construction: 1987, condition: not inspected (used), Used condition. 600 nails per minute. Minimum diameter of wire 2.2 mm Maximum diameter of wire 3.15 mm Minimum length of nail 45 mm Maximum length of nail 80 mm Hnedpfx Aksf Um Uzj Usu Oil consumption 0.036l/ 19800 nails Total weight 1604 Kg

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 800 mm, total width: 1,400 mm, total length: 800 mm, total height: 1,695 mm, DGUV certified until: 07/2027, type of input current: three-phase, overall weight: 1,000 kg, conveyor belt width: 50 mm, Head machine, dough divider and rounder König Rex Classic Weight range approx. 30 to 85 grams with discharge belt Connection: 400V, 16A-CEE plug Used machine Visit our large bakery machinery warehouse! Hodpfx Aksx N Hgco Ujnu

Condition: used, Video of the machine in operation available upon request. Hedpezzpcbsfx Ak Ujnu Here is the complete specification sheet based on the model: *ACIERA F5EP WORKING CAPACITIES:* - *Table: 800 x 300 mm* - 6 slots of 12 mm - *Travels: X 500 mm / Y 325 mm / Z 420 mm* - *Quill travel: 60 mm* - *Spindle / table distance: 365 mm* - *Spindle: ISO 40 - inclinable +- 90°* - *Speeds: 50 to 3400 rpm with continuously variable speed drive* - *Feeds: 10 to 600 mm/min in X/Y/Z* - *Rapid traverse: 1.5 m/min* - *Power: spindle motor 3 kW - Total 5 HP / 3.7 kW* - *Weight: 1600 Kg* - *Dimensions: 1200 x 1600 x 1800 mm*

Year of construction: 1973, condition: not inspected (used), Great condition. 900 nails per minute. Minimum diameter of wire 0.7 mm Hjdpfx Aefy Uwdek Uonu Maximum diameter of wire 1.4 mm Minimum length of nail 6 mm Maximum length of nail 25 mm Oil consumption 0.1l/ 8 hours Total weight 540 Kg

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, working width: 300 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 09/2027, type of input current: three-phase, conveyor belt width: 300 mm, year of last overhaul: 2024, Lippelt Mini Rustica roll production line for all types of specialty rolls simple and efficient production of square dough pieces robust technology connection: 400V, 16A CEE plug dimensions: approx. L 2300 x D 750 x H 1370 mm, L x W x H used machine Hedoy H Utlopfx Ak Uenu We have other bakery machines in stock for you!

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Equipment: CE marking, We offer this machine in very good condition: Zhou Tai AMD650Z, a bag-making machine, manufactured in 2021. Manufacturer: Zhou Tai Model: AMD650Z Year of manufacture: 2021 Condition: very good Type of machine: Bag-making machine Hjdpfx Ajzy Ig Ask Uenu If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, working width: 250 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 06/2027, type of input current: three-phase, conveyor belt width: 250 mm, year of last overhaul: 2026, Lippelt Mini Rustica Roll Production Line for all types of specialty rolls stainless steel design simple and efficient production of square dough pieces infinitely adjustable cutting length cutting rollers NEWLY coated machine is mobile simple, robust technology only available from us, DGUV V3 certified Hsdpfx Aksx I U H Us Uonu connection: 400V, 16A-CEE plug dimensions: L 2300 x W 750 x H 1370 mm, LxWxH used machine, cleaned & SAB inspected with warranty + spare parts service Optional: Rumo seed dispensing station maintenance contract service package spare parts box delivery service instruction & commissioning We have other bakery machines in stock!

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, Part of a Lisec DGU line 2.5 x 2.0 m, 1992-1994, consisting of: RSV-27/25, 1992, frame set section PSL-25/20, 1994, assembling station Hnodpfx Aertp D Aek Uou Both machines are in working order and can be seen in our warehouse in Hofkirchen/Austria

Condition: used, Year of construction: 1990, Progressive Header SACMA SP.140 Fully operational Available for any test PROGRESSIVE HEADER SACMA SP.140 Technical information: Number of dies: 3 Heading tonnage: 420 kN Hodpfx Akow Eluwj Uenu Maximum cutoff diameter at 500N/mm²: 8 mm Maximum cutoff length: 65 mm Max. kickout stroke die: 45 mm Max. kickout stroke punch: 14 mm Production speed (pieces per minute): 350 Main motor power: 19 kW Die diameter: 45 mm Die length: 75 mm Punch diameter: 38 mm Net weight: 8,500 kg Gross weight: 10,000 kg Condition: Very good, fully operational Year: 1990 Ready for immediate delivery Machine runs without any issues. Available at HBR srl – Calolziocorte (LC) Italy

Year of construction: 2000, condition: excellent (used), Capacity: Hsdpfszc H Hhjx Ak Ujnu 6.000 kg per hour butter out. 12.000 liter per hour cream in.