Used Hops for sale (386)

Condition: good (used), 1 x Alpina 330 Bowl Cutter 330 litres Kedpfoytgwzex Ac Ejdr with loader and emptier

Condition: good (used), Year of construction: 2005, Complete industrial paint booth, manufacturer Walther: 1 single booth + 1 double booth. Drawings with dimensions are available upon request. Kdodsxvbdmspfx Ac Eer

Condition: new, Year of construction: 2026, pressing force: 80 t, stroke length: 400 mm, - Capacity: 80 tons - Cylinder stroke: 400 mm - Working width: 920 mm - Electrically or manually operated - Pressure gauge - Emergency stop Kdedpfoy T Sntjx Ac Eer - 400V

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: Kjdpfx Aewzmcbjc Ejdr PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Storage location: Supplier Kdsdpjvvi Anofx Ac Esr

Condition: used, mileage: 365,000 km, power: 132 kW (179.47 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, airbag, central locking, electric window regulation, power mirror, traction control, Year of manufacture: 2016 Front axle: Steering Rear axle: Double wheels = Additional options and accessories = - Air suspension - Camera system - LED- lighting - Outside temperature display Kdedpfszu Nmtex Ac Eor - Radio/CD player - Reversing camera = Remarks = 3.0 L Engine 2 x Refrigerator Netto price 16.800,-- euro.

Condition: new, Year of construction: 2025, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Kdedoyffylopfx Ac Esr Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: like new (used), Year of construction: 2022, How do you do? We are offering you our cross-cut saw from MS Maschinenbau in very good condition. Technical data: Lengths between 600 mm - 3000 mm Workpiece thickness min. 3 mm max. 100 mm feed 5-30 m/min stepless Roller table is included Condition is as good as new If you are interested, the machine can also be tested. Kdjdpfx Ajtykw Ssc Eer If you have any questions, please contact us.

Condition: used, Year of construction: 2015, Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data - Application: Beer (bottles & cans) - Filling type: Isobaric Filling & Seaming - Bottle formats: 33 cl, 50 cl, 75 cl - Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) - Can formats: 33 cl, 44 cl, 50 cl - Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse Kedjy Sccxjpfx Ac Eodr - Capacity: 650 L - Heating: Propane gas - Electrical: Single-phase Fermentation & Cooling - Total fermentation capacity: 9,800 L - Stabilization capacity: 2,940 L - Dimensions (refrigeration unit): approx. 1,100 × 930 × 840 mm Scope of Delivery  - Isobaric Bottle & Can Filler | Inox CG | — | — | 350–400 bph/cph - Can Seamer | — | — | 2022 | Brand new, never used - Brewhouse | — | — | 2015 | 650 L, propane gas, agitator - Refrigeration Unit | W3/4 | — | 2020 | Multi-unit control, 4 zones - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, cooling jacket (Unit 1) - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, airlock (Unit 2) - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 650 L, dry-hopping port - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 320 L, dry-hopping port - Atmospheric Fermenter | — | — | 2015 | 650 L, non-insulated - Semi-Automatic Labeller | — | — | 2015 | Circular reel labels - Stainless Steel Kegs | — | — | — | 50 pcs, 30–50 L

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 400 mm, - Capacity 100 tons Kedpfewfnqzex Ac Eedr - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge - Emergency stop - 400 V

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Kedpfoyb R Iaex Ac Esdr Technical data  - Brewhouse (Brewiks 500, 2018) - Capacity: 5 HL - Heating: Electric, 36 kW - Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) - 6 CCTs × 12 HL useful capacity - Pressure rating: 3 bar - CIP Stations (Svoboda CIP 100) - 2 mobile CIP units - Tank capacity: 100 L (alkaline + acid) - Canning Line (Wild Goose GOSLING, 2021) - Semi-automatic - Formats: 0.33 L / 0.44 L / 0.50 L - Cooling (Quantor Chilly MAX 50L) - Glycol chiller for CCTs - General Key Information - Power supply (various units): 230–400V, 50 Hz - Applications: Brewing, fermentation, can filling Scope of Delivery  - Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) - Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) - Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) - CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) - Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity - Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used - Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L - Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L - Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer - Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing - Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank - Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min - Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) - Water tank | ROTH | — | — | 2× 750 L - Malt mill | Sommer | Maltman 220 | — | Precision mill - Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis

Condition: used, functionality: fully functional, gearing type: mechanical, fuel type: electric, Year of construction: 2019, Height: approx. 4,700 mm Bunker volume: approx. 60 m³ Plate conveyor width / length: approx. 1,150 x 4,800 mm Length: approx. 7,400 mm Kdodpfxowk E Emj Ac Esr Width: approx. 5,200 mm Bonfigioli gearbox: Type SK 185 Siemens electric motor: 346 to 524 volts, 160 watts

Condition: ready for operation (used), * Brand: Kleemann * Type: dosing belt conveyor with hopper Kdodpfx Acoy Tm Ibo Ejr * A-A length: 5000 mm, Beltwidth: 800 mm.(used) * Driving: gearbox approx 4 kW. * Dim. Hopper: 4000 X 1800 X 1150 mm.(new)

Condition: excellent (used), HOLZ-HER ProMaster 7125 machining center - used Kdedpfx Ajy Uxxnoc Eer Console machine, additional connections for pneumatic clamps, pneumatic workpiece stops with double-acting cylinders, pneumatic feeding aids, hardened, dust-protected prism guides, helical toothed rack and pinion drive (X-axis), ball screw spindles on Y and Z axes, network card for remote maintenance, switch cabinet cooling with heat exchanger, handheld control unit, C-axis, A-axis, rotating disc tool changer, incl. safety fence, incl. anti-fatigue mats, pendulum operation possible, ceiling laser for positioning suction cups / workpiece, central lubrication, manual, incl. material removal simulation ----- Technical data ----- Machining length (contour milling - radius) X: max 3,605 mm, Machining length (contour milling - radius) Y: 1,335 mm, max. travel speed X: 100 m/min, max. travel speed Y: 100 m/min, max. travel speed Z: 25 m/min, max. workpiece length X: 200 mm, Machine control software: CAMPUS HOPS, Main spindle motor power: 9.5 kW (S6), Main spindle speed: 1,000 - 24,000 rpm, Main spindle arbor: HSK 63, Spindle cooling: coolant, Drilling unit motor power: 3 kW, Drilling spindle arbor: M10, Morse taper 11mm, Number of vertical drilling spindles: 10 pcs, No. of horizontal double drilling spindles in X-direction: 1 pc, No. of horizontal double drilling spindles in Y-direction: 1 pc, Number of consoles: 6 pcs, Number of tools in changer: 18 pcs, Vacuum pump capacity: 140 m³/h, Extraction connection Ø: 250 mm, required volume flow: 5,300 m³/h, required static vacuum: 2,500-3,000 Pa, Compressed air connection: 6 bar, Compressed air consumption: 300 l/min, Dimensions incl. fence (L x W x H): 6,712 x 4,585 x 2,760 mm, Weight: approx. 3,800 kg Quality information: - complete basic cleaning - electrical system checked - pneumatics checked - adjusted according to manufacturer's specifications - ready for immediate use

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. Kdodpsxa H Ewjfx Ac Eor If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: used, Workshop Drawer cabinet PAROLAI 11 drawers: 3 drawers height 40 mm 6 drawers height 60 mm 1 drawers height 150 mm 1 drawers height 90 mm Dimensions (L x W x H): 910 x 720 x 1110 mm Weight: approx 150 KG Ksdezmxttopfx Ac Eodr

Condition: used, Year of construction: 1995, with new perforated screen used Brand: RSN Model: SL 400 Year of manufacture: 1995 CE type certified GS wood dust tested Kedpfx Acew U Emkj Eedr Motor: 18.5 kW Slow-running with hydraulic moving floor Hopper opening: 800 mm x 1000 mm Rotor width: 800 mm x 250 mm Vibration damper Number of knives: 18 pcs Screen hole diameter: 20 mm Original price approx. €27,000.00 Extraction connection: D 180 mm Space requirement approx. 1900 mm x 1300 mm x 1620 mm / plus platform Weight approx. 1500 kg Total connected load approx. 19.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Transfer in current condition as inspected without guarantee or warranty

Condition: excellent (used), Material storage cabinet – sliding door cabinet – workshop cabinet Width 2000 mm Depth 500 mm Height 1950 mm Kdodpfszmu Hvsx Ac Ejr

Condition: new, Year of construction: 2026, pressing force: 60 t, stroke length: 400 mm, clearance between the columns: 820 mm, - Capacity: 60 tons Kdedpfxjy Uahde Ac Eer - Cylinder stroke: 400 mm - Working width: 820 mm - Electrically or manually operated - Pressure gauge - Emergency stop - 400 V

Condition: good (used), 703 USED Fridrich 60x80 oven with proofer. EXTERNAL DIMENSIONS (in cm): - W: 90, - L: 205, - H: 220, CHAMBER DIMENSIONS (in cm): - width 60, - depth 130. EQUIPMENT: - 5 chambers - hood - fogging of each chamber - proofer 60x120 cm The device is available to verify in our warehouse (36-068 Bachórz, Poland). Kjdpsrdvkkjfx Ac Eodr Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN.

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface Ksdpjzutrasfx Ac Esdr The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: good (used), Year of construction: 2000, Offer 24467 Technical data: - max. pressing force 10 t - max. ram stroke approx. 550 mm - Tool mounting thread M 16 - Width of column approx. 1000 mm Kdsdpfxeuzhmge Ac Eer - Column depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm - Table height adjustable - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg

Condition: good (used), Workshop trolley, 400kg load capacity – used - : Price per unit: €550 (net) Manufacturer: unknown, probably Fetra Model: unknown Year of manufacture: unknown Load capacity: 400kg 2 fixed castors, 2 swivel castors Wooden worktop with 3-sided edge 4 drawers 1 cabinet door Wooden top width: approx. 1.20m Depth: approx. 69cm Height incl. worktop: 93cm Kodpfx Ajx El Haoc Eodr Length with handle: approx. 1.30m Width of steel frame: 1.04m Cabinet door width: approx. 46cm Cabinet door height: approx. 56cm Drawer width: approx. 43cm Drawer depth: approx. 55cm Condition: good Available: immediately Location: Frankenberg / Saxony warehouse

Condition: new, Year of construction: 2026, functionality: fully functional, MP180 Pressure Cabinet Washer is an industrial cleaning device designed for washing heavily contaminated mechanical, metal, and industrial components. Thanks to pressure cleaning technology and a stainless steel construction, the machine provides high durability, efficiency, and safe operation even under demanding working conditions. The closed-loop system and the ability to heat the cleaning fluid up to 70°C enable effective removal of grease, oils, carbon deposits, and other stubborn contaminants. Main advantages of the MP180 washer Closed-loop system with heated cleaning fluid – improved removal of difficult contaminants at temperatures up to 70°C. Pressure up to 8 bar – effective cleaning of hard-to-reach areas and heavily contaminated components. High-quality stainless steel construction – corrosion and mechanical damage resistance, ideal for long-term industrial use. Two-function gun – allows selection between compressed air only or cleaning fluid mixed with air, also enabling component drying. Adjustable leveling feet – precise machine positioning even on uneven surfaces. Construction and technology The MP180 cabinet washer has been designed for maximum functionality in industrial environments. The design of the washing chamber and the integrated fluid heating system allows maintaining a constant cleaning temperature, significantly increasing washing efficiency. The pressure gun with an adjustable operating mode enables both cleaning and drying with compressed air. All components that come into contact with liquids are made of materials resistant to aggressive cleaning agents and chemicals. Precision and work efficiency Thanks to high cleaning pressure and elevated operating temperature, the MP180 pressure washer enables thorough removal of even stubborn contaminants from components with complex geometries. The operator has full control over the cleaning process – from adjusting the intensity of the spray stream to drying the cleaned parts. The 180-liter working chamber allows comfortable cleaning of medium-sized components without the need to disassemble them into smaller parts. Applications The MP180 pressure cabinet washer is suitable for: Automotive workshops, Industrial plants, Machinery service centers, Manufacturing facilities. It is ideal for cleaning: Engine components, Gearboxes and transmission parts, Valves, Pump housings, Hydraulic system components, Other metal parts requiring intensive cleaning. Thanks to its corrosion resistance and high durability, the machine is suitable for long-term operation in chemically demanding environments. Standard equipment Two-function gun (air / cleaning fluid + air) Cleaning fluid heating system Built-in 180-liter tank Stainless steel working chamber Adjustable leveling feet Kdjdjuc Tpyspfx Ac Esr Technical specifications – MP180 pressure cabinet washer Parameter Specification Washer capacity 180 L Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: used, pressure:120 t stroke:400 mm table surface area:1750 x 500 mm Kedpfxet Hmlds Ac Ejdr press capacity:120 t working width:1740 mm total power requirement:3,0 kW weight of the machine ca.:2 t dimensions of the machine ca.:2 x 1,0 x 1,5 m