Used Hose Crimping Machine for sale (65,733)

Condition: good (used), Year of construction: 2020, operating hours: 22 h, Internal article number: 25019 Scrubbing suction machine Nilfisk BA 751 Serial number: 3510172302 101 Year of manufacture: approx. 2020 / 2021 (not discernible) Only approx. 21.5 operating hours so far!! The machine is in perfect working order and will continue to be used until the sale. Therefore, additional operating hours may be added. The batteries were defective. The cleaning device is currently operated with conventional car batteries. Fjdpjwq Nd Tsfx Am Eepp

Condition: used, Year of construction: 2020, 5-axis CNC machining center Fsdpfe Aiubdjx Am Ejpp Manufacturer: Houfek Type: Scorpion CE21RA Year of manufacture: 2020 Technical data - Workpiece size: 3200x2100x150 mm - Travel ranges X / Y / Z: 3900 / 2750 / 350 mm - Rapid traverse X / Y / Z: 70 / 70 / 35 m/min - Spindle: HSD ES 779 L 6P, 22 kW, max. 24,000 rpm HSK A63 - Drilling unit: 36 drilling spindles, grid 32 mm, stroke 70 mm, 1.7 kW (3 pcs.), drill chuck D = 10 mm (side screws) - Chain tool changer: 60 tools, max. length 180 mm, max. 100 mm, max. 3 kg, servo motor - Disc tool changer: 21 tools, max. length 150 mm, max. 150 mm, max. 5 kg, servo motor (additional controlled axis) - Vacuum table: Grid table (nesting), 8 zones, controlled via the control panel - Additional connections: pneumatic 4x pairs 6 mm (external clamping elements), vacuum 4x pairs 12 mm (templates, fixtures) - Machine accuracy: 0.1 mm / 1000 mm - Repeatability: 0.05 mm - Flatness and squareness X, Y, Z: 0.1 mm / 1000 mm - Electrical connection: 3/N/PE 400 V, 50 Hz, rated current 117 A, control voltage 24 V DC, IP 54 - Compressed air: min. 7 bar, approx. 300 l/min Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), bore capacity in steel (diameter) 20.0 mm bore capacity in cast iron 25.0 mm throat 210 mm bore stroke 100 mm turning speeds 240 - 3800 U/min table-size 300 x 425 mm morse taper MK 3 total power requirement 0.6 / 1.2 kW weight of the machine ca. 300 kg range L-W-H 500 x 700 x 1750 mm Machine from a vocational school (!!) - in checked condition - machine video - ?v=WGhTKBNBT2E Furnishing : - Column drilling machine - Drive: V-belt - manual spindle feed - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank Fodpsxacbzjfx Am Espp - adjustable drilling depth stop - Keyless drill chuck including taper mandrel - Connection cable + 16A plug

Condition: good (used), x-travel 315 mm y-travel 180 mm Fpjdpoxl E Sgefx Am Eep z-travel 320 mm taper in main spindle ISO 40 table surface area 600 x 250 mm T-slots 5 Stk. turning speeds 45.0 - 1950 U/min feed stepless 10 - 170 mm/min voltage 400 V total power requirement 5.1 kW weight of the machine ca. 1300 kg range L-W-H 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained (!!) Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in X+Z+Y axis * Rapid traverse continuously adjustable - Swiveling machine light - Control cabinet, installed on the left - Coolant device

Condition: used, Year of construction: 2008, travel distance X-axis: 705 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, table width: 460 mm, table length: 1,260 mm, table load: 400 kg, overall weight: 5,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 26,000 rpm, spindle nose: HSK-E50, number of slots in tool magazine: 28, tool length: 260 mm, tool diameter: 63 mm, tool weight: 3,000 g, Vertical Machining Center Manufacturer: FEHLMANN Model: PICOMAX 90-HSC Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Technical details: X-axis travel: 705 mm Y-axis travel: 425 mm Z-axis travel: 610 mm Feed rate (X, Y, Z axes): 1 – 20,000 mm/min Feed force (X, Y, Z axes): 12,000 N Table clamping surface: 1,260 x 460 mm T-slots (quantity x width x spacing): 9 x 12-H8 x 50 mm Max. table load: 400 kg Distance floor – coordinate table: 1,026 mm Distance coordinate table – spindle nose: 92 – 702 mm Horizontal throat depth: 480 mm Spindle speed: 50 – 26,000 rpm Drive power – main spindle (100/40% duty cycle): 11.5 / 15.0 kW Max. torque S1/S6: 25.2 / 32.9 Nm Tool holder: HSK-E50 Number of tool positions: 28 Max. tool diameter: 63 mm Max. tool dia. with adjacent station free: 100 mm Tool length: 260 mm Tool weight: 3 kg Power rating: 22 kVA Weight: approx. 5,200 kg Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation - FEHLMANN ATS 160 CNC rotary table - incl. machine vices (see image 6) Accessories, pictured tools, and workholding devices are included in the scope of delivery only if stated in the additional information. Fpedpfxezq Hkho Am Ejp Subject to technical changes, errors, and prior sale.

Condition: used, rotational speed (max.): 1,400 rpm, rotational speed (min.): 80 rpm, throat depth: 285 mm, table width: 470 mm, table length: 620 mm, Column-type drilling machine Manufacturer: ALZMETALL Type: AB 3 ESV Technical specifications: Overhang (throat depth): 285 mm Fsdpfs Aivw Rjx Am Eepp Stroke: 160 mm Table dimensions: 620 x 470 mm Speed ​​range: 80 – 1,400 rpm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and information; prior sale reserved!

Condition: excellent (used), x-travel 16500 mm y-travel 2000 mm z-travel 1200 mm Control HEIDENHAIN TNC-640 spindle speed: 4000 U/min. rapid traverse 25 m/min tool change unit 60 Fpsdpfx Amj Aiv Hno Eep coolant IKZ dividing each Kopfachse 2,5° tool taper ISO SK-50 total power requirement 68 kVA weight of the machine ca. 51 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from Arburg, model 370 C 800-100. The injection unit has been removed but is included. Overall, the machine is in good condition. Technical specifications: Year of manufacture: 2007 Clamping force: 800 kN Fpsdpox U Dnusfx Am Eop Distance between tie bars: 370 x 370 mm Maximum platen distance: 750 mm Tool installation height: 250 mm Injection unit: 18/20/25/30 (selectable) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices include VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Year of construction: 2006, condition: good (used), Manufacturer: Kronen Model: GEWA 3800 V Fjdpfx Ame Ait U Ue Eepp Year: 2006 Condition: Used Serial number: 380 Stock number: 3428 Capacity: max. 1800 kg/hr Water inlet: 2 3/4" Water outlet: 2 x 2" Infeed height: 1070 mm Outfeed height: 830 mm Power: 3 x 400V, 50Hz, 5.9kW Dimensions: 3800 x 1000 x 1600 mm Weight: 583 kg

Condition: used, Year of construction: 2023, Manufacturer: Plasmatreat GmbH, Steinhagen, Made in Germany Type: PTU1212 Serial no.: 10715 Commission no.: 262904 Year of manufacture: CW 19/2023 Power supply: 3~ / 400 V / 230 V AC / N / PE, 50–60 Hz Imax / fuse: 12 A / 3 × 16 A Icw: 0.64 kA Marking: CE Equipment (as per photos and HMI) KUKA articulated robot for part handling within the cell. Plasma nozzle system PFW10PAD (designation as per HMI). PlasmaPlus® unit (HMI function “PPlus”) with vaporizer, gravimetric precursor dosing, MFC/GFC gas control for process and carrier gas, and precursor reservoir. Plasmatreat touch HMI on a support arm, with recipe management, set/actual and tolerance monitoring of all process parameters, emergency stop and control buttons. Fully enclosed safety housing with glazed doors, signal light, main switch, and extraction connection. Mobile control unit with push buttons. TBH extraction and filter unit, connected to the cell via a flexible hose. Please note: * Sold in the name and on behalf of BorgWarner Turbo Systems. * Location: Kirchheimbolanden, Germany Fpedpfx Ae Air S Eem Eop * Not included: workpieces, work tables and part carriers, pedestal fan * The machine is currently not in production and has been stored.

Condition: used, Year of construction: 1995, Manufacturer: Koppens Model: PR600 Year: 1995 Condition: Used Serial number: 1087 Stock number: 3425 Belt width: 600 mm Power: 3 x 400V, 50Hz, 1.7kW Dimensions: 2450 x 850 x 2150 mm Weight: 300 kg Fsdpfx Aj Aitxqem Espp With a transfer belt of 340 mm.

Condition: used, Year of construction: 2001, Brand and Model: CORREA EURO 2.000 Type: CNC Year: 2001 Cnc: HEIDENHAIN TNC- 426 Table dimensions: 2000x1000 mm T- slots: 8 x 22 mm Distance between slots: 125 mm Maximum table load: 5000 kgs X – axis travel : 2000 mm Y- axis travel : 1250 mm Z – axis travel: 650 mm Spindle head Direct exit Taper: ISO 40 Speed range : 20-10000 rpm Spindle power : 25 kw Working feed rates: 2-20000 mm/min Rapid traverse rates(X,Y,Z) : 20000 mm/min Approx. Machine weight: 14000kgs Machine dimensiones: 6500x3728x4000 mm Machine equipped with: Fodpfs Aivm Ijx Am Ejpp Electronic handwheel : HR-410 Chip conveyor 2 Longitudinal , 1 transverse Toolt changer : ATC 24 Through-spindle cooling

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Minolta AccurioPress C4070” colour production system Fpedpj Ait Ivsfx Am Esp Items for sale: 1x Minolta AccurioPress C4070 with the following specifications: incl. PF-707-m paper deck incl. IC-609 image controller incl. FS-532/RU-518m booklet finisher incl. IQ-501 Integrated Colour Care Unit incl. MK-760 Long Sheet Kit incl. MB-508 Multi-bypass Unit incl. SD-510 Booklet Unit Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 919,107 pages Black: Approx. 616,939 pages Colour: Approx. 302,168 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 1998, Control system: Heidenhain TNC 124 Travel ranges X/Y/Z: 500 x 400 x 400 mm Spindle speed: 4,500 rpm Fpjdps Ai H Niofx Am Eop Tool holder: SK 40 Manual rotary table with tilting axis: 700 x 500 mm

Condition: excellent (used), Year of construction: 2020, Brother C-00 control system Fedpe Ai H Nuofx Am Ejpp Travel ranges X/Y/Z: 650 x 400 x 435 mm Dual pallet changer, 800 x 400 mm Spindle speed: 16,000 rpm Tool magazine for 40 tools, BT 30 Coolant pressure: 70 bar 3D measuring probe, OMP 40 Electronic handwheel Chip conveyor

Condition: defective spare-parts repository (used), Year of construction: 1997, grinding length: 880 mm, grinding width: 510 mm, grinding wheel width: 100 mm, spindle speed (max.): 4,300 rpm, overall weight: 7,500 kg, power: 26 kW (35.35 HP), Surface Grinding Machine Fodpfxowwl N So Am Ejpp Manufacturer: JUNG Model: C 740-E Year of manufacture: 1997 Control system: Siemens Technical specifications: - Grinding length: 880 mm - Grinding width: 510 mm - Max. speed: 4,300 rpm - Grinding wheel diameter: 210 – 400 mm - Grinding wheel width: 100 mm - Total power requirement: 26 kW - Machine weight: approx. 7.5 t The machine is untested and is offered as a source of spare parts! Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1970, mechanical ja Fpedpfsy Ty N Sjx Am Eep centre distance 2000 mm weight of the machine ca. 7,9 t

Condition: used, Year of construction: 1999, x-travel 1900 mm y-travel 800 mm z-travel 800 mm control 426 Heidenhain weight of the machine ca. 12 t Fodpsrpa N Iefx Am Eepp

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “HP Latex 700” latex printer Item for sale: 1 x HP Latex 700 We are happy to configure the machine to your requirements. Please feel free to contact us! Fjdpfx As Ai D Sdem Eepp Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo! Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2000, Working width: 230 mm Working height: 130 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top, top, bottom Motor power, bottom spindle: 5.5 kW Motor power, right spindle: 5.5 kW Motor power, left spindle: 5.5 kW Fpedo Ai Em Topfx Am Eep Motor power, top spindle: 5.5 kW Adjustment, right spindle: hand crank Adjustment, left spindle: hand crank Adjustment, top spindle: hand crank Planing heads: Tersa Feed rate: infinitely variable Feed roller pressure: mechanical Current consumption: 45A Power consumption: Motor brake: automatic Dust extraction port: Machine length: 4000 Machine width: 1700 Weight: 1500

Condition: excellent (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, overall weight: 18,000 kg, type of input current: three-phase, input current: 380 A, total width: 3,000 mm, total length: 7,000 mm, total height: 3,500 mm, input frequency: 50 Hz, Stack-type flexographic printer. Fsdpfxjzv D Dce Am Eopp

Condition: new, Year of construction: 2012, functionality: unexamined, machine/vehicle number: Modelo Y15V # de Serie C12070192, screw diameter: 22 mm, displacement volume: 36 cm³, injection pressure: 1,417 bar, injection weight: 44 g, ejector stroke: 200 mm, plate length: 240 mm, plate width: 200 mm, plate height: 40 mm, total length: 1,200 mm, total width: 1,200 mm, total height: 2,400 mm, overall weight: 700 kg, heating capacity: 2 kW (2.72 HP), power: 2.2 kW (2.99 HP), type of input current: AC, input frequency: 60 Hz, input voltage: 220 V, I am selling 3 Guan Ming Y-15 V machines and 1 Y-25V machine, all new from old inventory. They have been stored in their original packaging since they were received from China in 2012 and have never been put into production. There are 3 machines with a capacity of 15 tons and 1 machine with a capacity of 25 tons. The Y-15V machines have a 22 mm screw and a maximum injection capacity of 44 grams. The Y-25V machine has a 30 mm screw and a maximum injection capacity of 103 grams. All 4 machines are located in Tepotzotlán, State of Mexico. Fpjdpsz Aby Ujfx Am Eop They are sold without molds, accessories, or spare parts. Price plus VAT. Loading, crane, maneuvering, insurance, and transportation are the responsibility of the buyer. The machines are sold subject to inspection and testing by the buyer. Payment must be made before the machine(s) are removed.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S2 year 2015 servo envelope inserting system available. 12 station base system!!!!! The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 Fodpjxyfmgsfx Am Eopp - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Year of construction: 2012, condition: excellent (used), Now available: Fpjdpfxjhx Rkcs Am Eop Mueller Apparatebau 6612 cutting system with complete pile stacking line This machine is equipped wih following for processing continues feed, cutting and stacking - unwinder - Mueller apparatebau merger - Mueller apparatebau cutting system - Mueller apparatebau automatic collating table - Mueller apparatebau output belt Now available for a very good price!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Fjdpfx Amsg Tu N As Espp Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.