Used Hot Gluing Foam for sale (4,558)

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Facility to connect up to 6 hoses 10kg Tank Capacity Hfjdpfxjwq Suuj Af Ajk

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Hfjdpfxowq Sv Ee Af Ajk Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hsdpfsp H Swdsx Af Aofk Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Hsdpfszt N R Njx Af Asfk

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES – very good condition – used press – not repainted – designed for professional use Hedpfxjzulxle Af Aofk Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: used, machine/vehicle number: 008695, Max working length: 2500 mm Max working width: 1300 mm Pressure Exerted: 2 Kg/cm2 Hfodpfx Afoztkbps Ajk No of Pressing cylinders: 4

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Hjdpexx Tmrofx Af Aofk Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted Hsdpfx Afsxx Ti Tj Aofk SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim Hfsdpezkh S Hefx Af Aek

Condition: used, double-acting hand lever cylinder Hfjdpjzkl T Iofx Af Ajk Storage location: Nattheim

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, NEW ++ NEW Unox Speed Compact Hot Air Oven NEW ++ NEW Unox Speed oven for baking, cooking & steaming Touch control/operation with ADAPTIVE Cooking & SPEED Plus 384 cooking programmes & 10 favourite programmes can be stored Tray size 300 x 300 mm Temperature range from +30°C to 280°C Oven-Microwave-Hot Air Flows Dimensions: 424 x 669 x 616 mm (W x D x H) Connection 220-240V, Schuko plug New unit with warranty & spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Special trays Spees.Bake tray Quick.Rinse hand shower Speed Marks Ethernet connection DDC.App Spray & Rinse cleaner Maintenance contract Delivery service Commissioning & instruction Hjdpfxsxckaks Af Ajfk Visit our large oven showroom!

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Hfsdeztz D Uspfx Af Ajk Includes additional components, fillers, and letterpress locks.

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm Hfedozryy Espfx Af Aek - Press cylinders: 6

Condition: used, Technical data: Hfodpfozrx Uzsx Af Aok - Bore: 50 mm - Flight circle (ø): 202 mm - Length: 70 mm - Marking: MEC - Set: Left + Right

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Hsdpfxjxgqmxo Af Ajfk Storage location: Nattheim

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Hfodeztn Nkspfx Af Ajk Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: ready for operation (used), functionality: fully functional, Hot stamping machine Semi-automatic Mechanical sliding table Temperature and timer control Stamping plate size: 35 x 24 cm Hfsdpfxozq Uuuo Af Ajk Various replacement plates In addition, inking unit included (disassembled)

Condition: used, mileage: 17,025 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 55,000 mm, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (at the following telephone number). MAN LE 8.150 4x2 fire engine 2,500-liter foam tank Cruise control, engine brake, ABS/ESP/ASR, auxiliary drive, halogen headlights, additional roof-mounted headlights, rotating beacons, air horns, Rockinger trailer coupling (40 mm), tire tread: 1st axle 12-13 mm, 2nd axle 12-15 mm Hedpfx Afezhzt Ee Asfk Permissible total weight: 7,800 kg, unladen weight: 4,610 kg, payload: 3,190 kg Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. You can find more information on our website. ... Errors, changes, and prior sale reserved!!! ESP Cab: For local transport = Further information = Engine displacement: 4,580 cc GVW: 7,800 kg Please contact Tobias Ebert for further information.

Condition: used, mileage: 17,656 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 55,000 mm, total width: 23,700 mm, total height: 2,850 mm, Year of construction: 2005, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at ). MAN LE 8.150 4x2 fire engine 2,500-liter foam tank, cruise control, engine brake, ABS/ESP/ASR, auxiliary drive, halogen headlights, additional roof-mounted headlights, all-round warning lights, air horns, Rockinger trailer coupling (size 40), tire tread depth: 1st axle 12-13 mm, 2nd axle 13-15 mm, permissible total weight: 7,800 kg, unladen weight: 4,610 kg, payload: 3,190 kg. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change without notice!!! ESP Cab: Designed for local transport Hedpezf Ul Njfx Af Aofk = Further information = Engine displacement: 4,580 cc GVW: 7,800 kg Please contact Tobias Ebert for further information.

Condition: used, mileage: 10,616 km, power: 110 kW (149.56 HP), axle configuration: 4x2, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total width: 23,700 mm, total height: 28,500 mm, Year of construction: 2005, Equipment: ABS, EBS, For any inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (Tel. ...). MAN LE 8.150 4x2 Firefighting Vehicle Body: 2500 F, 2,500-liter foam tank, Schmitz: SLF 25/25, number of seats 3, manual transmission, cruise control, engine brake, ABS/ESP/ASR, PTO, halogen headlights, rotating beacons, 40 mm Rockinger coupling, tire tread: 1st axle 12-13 mm, 2nd axle 13-14 mm On request, we can provide you with a leasing or financing offer. Hfjdpoy Ivq Uofx Af Aok Mr. Seidel (Tel. ...) will be happy to assist you. You can find more information on our homepage. ... Errors, changes, and prior sale reserved!!! ESP Cab type: Short-haul = Further information = Engine displacement: 4,580 cc Gross vehicle weight: 8,600 kg Please contact Tobias Ebert for more information.

Condition: ready for operation (used), functionality: fully functional, Boiler plant for production of hot water suitable for wood driers. Capacity : 1 MW Designed for solid fuel like, wood chips, sawdust, bark Plant is available beginning of 2027 Hfedpezt Iycofx Af Aok

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Hjdjw Na Hbjpfx Af Ajfk

Condition: ready for operation (used), Press force: 420kN, specific pressing force: 60N/cm², motor power: 22kW, max. theoretical throughput: 2000kg/h, filling height: 950mm, bale dimensions: 1000x720x1200mm, max. bale weight: 600kg, width: 2000mm, height: 2150mm. An on-site inspection is possible. Hfodpfxezk Nars Af Aok

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Hodpeuyk S Aefx Af Aofk

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Hfsdpfx Asttbd Nef Aek