Used Hot Glue Laminating Machine Hand Conditioning for sale (96,369)

Condition: used, Year of construction: 1989, A machine for applying glue to cardboard. Ledpfx Asua H Hmsbnoac Technical parameters: - working width: 170 mm - machine dimensions: 5800x2400x1800 mm - power supply: 400V Technical condition: used machine, to be reviewed

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Lajdpfx Aoy Sd Tlsbnsc Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Laedpfxjzb Ip Io Abnjc Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Lasdpsydnxnjfx Abnjc Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: used, functionality: fully functional, Limitless hot stamping machine / foil stamping press. Industrial hot foil stamping machine suitable for printing and branding applications. Machine details: Manufacturer: Limitless Hot Stamping Machines Model: 360B 240V 1050 watts Industrial production unit Suitable for: foil printing hot stamping packaging decoration leather goods plastics promotional products industrial marking Lasdey Sg Hnepfx Abnec Commercial production machine from operational facility. Sold as seen / untested.

Condition: good (used), For sale is a professional laminator IBICO IL-12HR (A3). This device is ideal for offices, copy shops, schools, or small print shops. Technical specifications: Lasdpfx Aeufgn Isbnjc • Manufacturer: IBICO • Model: IL-12HR • Type: Hot laminator (Pouch Laminator) • Max. laminating width: 320 mm (A3) • Operating voltage: 230V / 50Hz • Power: 1100 W • Temperature range: up to 160°C • Multiple speed settings • Digital temperature display • Reverse function Condition: Used, fully functional. Normal signs of use (see photos). The device heats up correctly and operates reliably. Scope of delivery as shown. Advantages: • Robust metal construction • Suitable for continuous operation • Even heat distribution • Ideal for A3 and A4 documents • Also suitable for thicker laminating pouches

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Ljdpfx Aezgc U Uobneac Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Lasdpfxszgc Uuj Abnsc Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: excellent (used), Gietz FSA 790 EFF, year of manufacture: 2001 Technical specifications: - MABEG feeder - 2 x transverse foil - 3 x longitudinal foil - Hot foil embossing (2 x honeycomb plate) - Die-cutting (additional die-cutting tool) - Hologram option (electronics refurbished in 2020) Lasdpfxszd T Hpe Abnoc - 6 heating zones Technical details: - Maximum sheet size: 790 x 560 mm - Minimum sheet size: 297 x 210 mm - Maximum stamping area: 720 x 520 mm - Speed up to 5,500 sheets/hour

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Lodezb Aicopfx Abnjac Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: ready for operation (used), A good used Saxon 5 Hot Air Heat Sealer with height adjustable column and mobile trolley - right to left configuration - tested and working well - videos available on Whats App Ready to ship worldwide Lsdpfjzcylwox Abnsac

Condition: ready for operation (used), functionality: fully functional, We offer this ready-to-use IML Machinery DA-900 IML DA 900 box laminating machine. Manufacturer: IML Machinery Model: DA-900 Condition: ready for use Category ID: 174 Type ID: 82 Machine type: IML DA 900, box laminating machine DESCRIPTION Thanks to its ease of operation and quick changeover capability, this electro-pneumatic machine is suitable for small and medium production volumes of high-quality boxes. The operator places the box onto the pre-glued facing paper and then manually feeds it into the machine. Once the box is positioned, the processing sequence is started via the machine's foot pedal. The machine then operates independently, lining the box, including the inner flap. At the end of the cycle, the box is automatically ejected. TECHNICAL DATA Production: approx. 7 pieces/minute Voltage: 220 volts, single-phase Total power: 2.5 kW Lajdpezfv Tzjfx Abnsc Compressed air connection: Rilsan hose Ø 12 mm Air consumption: 20 NL/minute at 6 bar DA 900 Box dimensions (L × W × H): min. 60 × 60 × 10 mm; max. 430 × 350 × 120 mm Machine dimensions (W × D × H): 1200 × 1400 × 2300 mm Weight: 1000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Ledpfx Aozc Rxbsbnjac Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: excellent (used), Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Ljdpfx Aewv Tuajbnsac

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1522, We are offering this well-maintained H&H AI 008 hot air taping machine, manufactured in 2015. Manufacturer: H&H Model: AI 008 Year of manufacture: 2015 Condition: good Category ID: 677 Type ID: 2467 Machine type: Hot air taping machine Lodpezdy Rbjfx Abnoac If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is located at our production facility in Mönchengladbach and can be inspected and tested there during normal business hours. It was in use in our production facility until recently. It is perfectly suited for waterproof seam sealing.

Condition: like new (used), functionality: fully functional, Equipment: compressor, Vivid Matrix MX370P Laminating/Sleeking Machine pneumatic pressure adjustment of the heating roller unwinding for sleeking film Faster Foiling Kit for sleeking max. speed 10 m/minute max. sheet width 370 mm max. sheet length 1200 mm standard with manual feeder Optionally available: Vivid OmniFow Feeder 380 30 cm stack height max. sheet width 330 mm Laedozbrrgjpfx Abnjc max. sheet length 380 mm Both are available on short notice.

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Ledpfx Aboy E Avljneac Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, GMP QTOPIC-380 F Hot laminator for single-sided lamination, year of manufacture 2022 Working width 380 mm. Chrome roller 100 mm Ø. Thermal lamination up to 10 m/min. Single-sided lamination with de-curling device for perfectly flat sheets. Automatic sheet overlap for consistent results, independent of the operator. Working width 380 mm Films 25 - 44 microns, 58/77 core Paper thickness 120 g/m² ~ 350 g/m² Speed up to 10 m/min Heating time 5 minutes Pressure roller pneumatic Connection values 230 V, 2.8 kW Dimensions H x W x D in mm 1350 x 1700 x 720 Separation also possible for nylon films, pneumatic roller pressure with automatic stop at the end of the stack, including compressor. Laodpfeza Hdzsx Abnoc Sleeking (printing enhancement). Use of embossing rollers possible.

Condition: excellent (used), Year of construction: 2017, The FOLIANT Pollux 760 SF High-Speed Compact Industrial Laminating Machine Year: 2017 Maximum sheet size: 760 x 1100 mm Minimum sheet size: 320 x 250 mm Maximum speed: 50 m/min Paper weight: 115 - 600 gsm Temperature control: 80 - 140 °C PALLET STACKER FILM LOADER Touch screen controls Lodezdyqzopfx Abneac

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Lsdpfx Abezdnpxonjac Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: new, Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 3JUM178, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 250 mm/s, Komfi Junior 36 Brilliantly simple, compact and easy to operate laminator for orders up to B3 sheet format. Despite its small footprint it provides professional high quality lamination in a cost-effective package. Automatic sheet separation using built-in perforator and unique Komfi design tilting separating mechanism. Speed 15 m/min = 2000 SRA3 sheets/h Max sheet size 36 x 80 cm Paper weight 115-350 g/m² Machine dimensions (delivery desk included) 277 x 77 x150 cm Basic configuration Feeder: Manual feeding, automatic overlap control, mis-feeding detection. Laminating Unit: IR heating with temperature sensor, adjustable spread roller, rubber-coated pressure roller, adjustable stoppers, pneumatic pressure system. Separator & Delivery: De-curling unit, film perforator, skewing wheel, snapping unit with fixed speed, fixed delivery desk. SW functions included Zero overlap option for thick sheets processing. Choice of measuring units. Intuitive user interface with built-in diagnostics and troubleshooting. Options Auxiliary piston compressor if central air supply is not available. External automatic sheet feeder for later upgrade. Teflon coated pressure roller with non-sticking surface to reduce film or duplex print marking. Airshaft for easier changeover of laminates. Film slitter to cut film roll to the required width. Additional On roll perforator. Lajdpfx Abszdnnnsnoc Effect foiling device with possibility to apply PSA film too. 1″ unwinding shaft for effect films. Automatic skew wheel for reliable separation of difficult films. Air ionizer for smooth sheets unloading without static charge. Roll lift for comfortable handling of laminating film rolls.

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Year of manufacture: 2017 Ledpfxexcwr Hs Abnjac Motor power: 0.75 kW

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Year of manufacture: 2017 Lasdpfoxcw Afex Abnsc Motor power: 0.75 kW

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Year of manufacture: 2008 Machine length: 11,000 mm Lasdpfx Aezdlabebnsc Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,300 mm, input voltage: 380 V, overall weight: 360 kg, roller diameter: 185 mm, height adjustment type: mechanical, working height: 120 mm, Roller glue spreader FIN SC2R-1300 Working width: 1300 mm Working height: 120 mm Lasdpfx Abjx Af Nyenjc Manual roller gap adjustment Roller diameter: 185 mm CE certificate Power: 0.37 kW Weight: 360 kg