Used Hot Melt Systems for sale (39,110)

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Dcsdeurlcrepfx Afnjc Manufacturer's technical support on request. Machine located in central Poland.

Condition: used, functionality: fully functional, Year of construction: 2014, The printer was rarely used and was located at a university. It is no longer in use. Dodow Inpnepfx Afnjcc

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker! Dcjdpfx Aed S Dqnofnjc Function: The feeding tray of the press is in position, the work piece carpet is pressed under the holding device. With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device. Advantages: • The 3D-thermoforming productivity increases- because of quick clearing the table • Savings of time and staff - the preliminary cutting-out of the pressed parts is removed completely • Simple handling of the boards • The foil edges of the 3D furniture doors are not damaged, because the foil is not pulled over the edge of the door • Automatic transfer of the whole carpet to a carpet trimming machine is optionally available. • The pins will be protected with this turn over system because the cutout of the over standing foil is made not on the pin table. Details: • Rigid welded frame construction to accommodate the machine parts • Standard size 2800 x 2220 mm x 1200 mm • Hydraulic power unit • Turn table consisting of 9 arms with a special surface of rubber • Vacuum system with hose connections for the turn table • Turning cycle approx. 18-25 seconds • Control System: Siemens LOGO • Protective fences and security devices For the presentation of the turning process, a video is available.

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and membrane on machineseeker! RBM 1500 F e a t u r e s • Four-head rotating brush • Infeed inclined roller conveyor with separation • Spiral brush for removal of loose glue residues O p t i o n s • Fifth head rotary brush • discharge roller conveyor with buffer function • Deionization of the furniture fronts after cleaning • Modem for remote maintenance A d v a n t a g e s • Chaotic occupancy by automatic Adaptation to front thickness and size • Up to 2000 parts / 8 h The RBM 1500 is a brush machine for film-coated 3DMöbelfronten. The proven four-head rotary brush system removes the Glue overspray on the backs of the furniture fronts and achieves an optimal edge quality. This result is achieved by the disc brushes pneumatically pressure-controlled touch down and the backs the fronts are singing. The RBM 1500 is for a performance of up to designed for 2000 parts per shift. This is the machine the optimal brush system for smaller and medium sized Productions. The RBM 1500 is with an automatic size and Thickness detection of furniture fronts equipped. This allows adaptation to chaotic loading without loss of time in the run. The flexible control offers the Possibility of brushing rectangle and contour parts. Dcjdpsd S Eagofx Afnec The low-maintenance brushes and long service life ensure low production costs. P r o d u c t i o n Machine: RBM 1500 Front shape: Rectangle / Contour Frontsize minimal (L x W x H): 180 x 90 x 15 mm Maximum frontsize (L x W x H): 3000 x 650 x 38 mm Brush operation: 2000 parts per 8 h Standard parts of 650 x 400 mm

Condition: good (used), In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker! Paternoster For the membran press membrane press FOILS-STORAGE-PATERNOSTER for the foil-roles stock and at the membrane press Technical Description: Height of the paternoster 3800mm Max. foil width 1600mm Max. foil diameter 500mm 12pcs bearing rods Size of the paternoster 1000x2370x3800mm Inclusive foil transporter (trolly) Drive capacity 1,5 kW Total upload 4080 kg at a max. rolls weight of 340 kg Tools weight incl. Up weight- 5240 kg Specific ground-load capacity (1,89 to/m²) Pod-inside-diameter max. 90mm, bearing rods diameter 42,4 mm Side panels - total all over the overall height Protection lattice from 2,2 metres over the floor to the over edge overall-height Load chain as a hollow-bolt chain Dcsdsbgdv Iopfx Afnec Fraction strength 100 kN, division 50mm = bearing rods-hanger system raster Rotation speed ca. 5,5 m/min Control with a key-switch with return (TOTMANN) for switch on/off Nominal voltage 400 V; 3N; 50 Hz mains (net) connection-pipe with CEKON-plug 16A Mains (net) fuse (construction sided)- 10A inert NO Price on request

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3009F459805, Year of construction: 2021, operating hours: 1,514 h, total length: 1,120 mm, total height: 740 mm, total width: 1,070 mm, overall weight: 211 kg, table width: 1,120 mm, table length: 1,070 mm, MJP 2500 Plus, lightly used. Complete with post-processing oven supplied by the manufacturer and an uninterruptible power supply (UPS). Last inspection: January 2024. The machine has been tested and is fully functional (see images and videos). Suitable for use with biocompatible and sterilizable materials certified by 3DSystems. A list of compatible materials and the technical data sheet are attached. Djdpfx Aoxdx Ekofnscc

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Dcsdpfxevmxvfe Afnoc Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: new, Year of construction: 2025, functionality: fully functional, Drying Centrifuge Model ERFOR® CR8 Component device for recycling washing lines ♻️ ♻️ ♻️ The machine is designed for drying plastics—both soft and hard—including: films such as LLDPE, LDPE, HDPE, PP, PVC, PS, PA, post-agricultural films, agro-fibre, shredded big bags, PP sacks, fishing nets, peat packaging, and many more. Drying centrifuges Model - CR8 55/75 Motor power [kW] - 55/75 kW Film drying capacity [kg/h] - 1500/2000 Dimensions (L*W*H) (mm): 1970*2800*2060 / 2100*3150*1900 Ground material drying capacity [kg/h] - 5000 Dsdouql Rtepfx Afnocc Our offer also includes: Complete plastic recycling systems DWFS® washing lines Granulation and extrusion lines For more information, please visit our website.

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg Dsdpfx Afeuqwzwsnjcc

Year of construction: 2024, condition: new, functionality: fully functional, We are a manufacturer of complete technological lines for washing and granulating plastics. We also offer individual devices such as centrifuges, washers, screw presses, and flotation tanks. A high-performance plastic washing and granulation line, engineered for processing a wide range of materials including PE, PP, HDPE, LDPE, LLDPE, PS, and ABS. This comprehensive recycling solution efficiently manages cleaning, drying, and granulation processes, ensuring the production of high-quality recycled material. Each line is custom-designed to meet the specific requirements of our clients, with throughput capacities ranging from 300 kg/h up to 2,500 kg/h, providing the ideal solution for operations of any size. The system is built for long-term durability and user-friendly operation, making it suitable for both small and large-scale recycling plants. Advanced technologies maximize productivity, reduce energy consumption, and ensure consistent results, delivering a reliable and cost-effective solution to enhance plastic recycling efficiency. Dedpfx Asuqu Uhofnjcc Please contact us for inquiries and quotations. Erfor.pl

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. Dodpouqmavofx Afnocc We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dedpfjp H Swdex Afnecc Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Year of construction: 2003, operating hours: 70,263 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-21425, MACHINE DETAILS Dcsdoyf Dr Hjpfx Afnoc Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 70,263 h

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 100,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm Dsdjyf A U Hjpfx Afnecc EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Year of construction: 2003, operating hours: 64,363 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-22267, MACHINE DETAILS Dcodpfjyf A E Sox Afnsc Dimensions & Weight Dimensions (L x W x H): 880 x 660 x 1,150 mm Weight: 182 kg Operating hours: 64,363 h

Year of construction: 2003, operating hours: 59,762 h, condition: ready for operation (used), functionality: fully functional, overall weight: 182 kg, total length: 880 mm, total width: 660 mm, total height: 1,150 mm, machine/vehicle number: 14-26298, MACHINE DETAILS Dcjdsyf Apqjpfx Afnec Dimensions & Weight Weight: 182 kg Dimensions (L x W x H): 880 x 660 x 1,150 mm Operating hours: 59,762 h EQUIPMENT Robot handheld control device

Condition: ready for operation (used), functionality: fully functional, total width: 600 mm, total length: 1,700 mm, overall weight: 183 kg, coil width: 600 mm, mandrel diameter: 80 mm, TECHNICAL DETAILS Max. coil width: 600 mm Mandrel diameter: 80 mm MACHINE DETAILS Dodpfjyf Aiwjx Afnscc Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 600 mm x 800 mm Machine weight: 183 kg Connected load: 400 V

Year of construction: 1994, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30194.117.0, MACHINE DETAILS Dimensions & Weight Dcedpfxjyf Aido Afnec Dimensions (L x W x H): 800 x 800 x 1,850 mm Weight: 310 kg EQUIPMENT Roll bar Cable set Robot hand control unit Control software Logbook

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1061276, filter area: 50 m², total height: 2,760 mm, total width: 1,520 mm, total length: 1,520 mm, operating pressure: 6 bar, Submission of a bid obligates timely collection by 27.02.2026! TECHNICAL DETAILS Filter area: 50 m2 MACHINE DETAILS Control type: 24 or 230 V Opening/closing time: max. 2 s Operating pressure: 6 bar Dcedpfx Aeyfn Sdefnec Dimensions (L x W x H): 1,520 x 1,520 x 2,760 mm EQUIPMENT Sendzimir-galvanised pipe components Shaped parts Machine connections Flame-retardant antistatic PU spiral hoses Hose cuffs Pipe clamps Mounting material for conveying chips and dust from 7 woodworking machines Pneumatic shut-off slides Slide housings made of die-cast aluminium

Condition: ready for operation (used), functionality: fully functional, controller manufacturer: Klöckner-Möller und SPS-Siemens, workpiece length (max.): 2,500 mm, workpiece weight (max.): 50 kg, stack height: 1,200 mm, Auction of a feeding and stacking system for the furniture industry! Bargstedt TBH20/ER/25/08/S (single-sided feed station, machine no. 0-280-07-7582) 1 powered stacking roller conveyor 1 lifting table with powered stacking roller conveyor 1 vacuum suction carriage (minimum workpiece dimensions 280 x 230 mm) 1 stripping wall 1 central thickness adjustment for the suction carriage 1 height-adjustable belt conveyor 1 infeed roller conveyor with skewed support rollers Vacuum crossbeam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack change time: 35 seconds Basic cycle output max.: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (turning station from longitudinal to transverse, machine no. 0-282-07-7584) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 - 50 m/min MACHINE DETAILS Total connected load: 2 kW Air consumption: 27 NL/min Operating pressure: 6 bar Bargstedt TDK 10/25/10 (turning station from transverse to longitudinal, machine no. 0-282-07-7585) TECHNICAL DETAILS Roller diameter: 65 mm Roller pitch: 125 mm Max. workpiece weight: 50 kg Feed rate: stepless from 10 - 50 m/min MACHINE DETAILS Djdoyg Haijpfx Afnocc Total connected load: 2 kW Air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (single-sided stacking station, machine no. 0-281-07-7589) 1 height-adjustable single panel transport 1 vacuum suction carriage (minimum workpiece dimensions 280 x 230 mm) 1 central thickness adjustment for the suction carriage, adjustable for panel thickness to take over the panels 1 lifting table with powered stacking roller conveyor 1 powered stacking roller conveyor, placed behind the stacking station Vacuum crossbeam (2-lane operation, max. 4 parts in sequence) TECHNICAL DETAILS Stack height: 1200 mm Stack change time: 35 seconds Basic cycle output max.: 17 cycles/min Max. workpiece weight: 50 kg Max. workpiece length: 2,500 mm MACHINE DETAILS Control: Klöckner-Möller and Siemens PLC Total connected load: 14 kW Compressed air consumption: 81 NL/min Operating pressure: 6 bar

Condition: used, machine/vehicle number: 008296, Stock dimension length: 40000 mm Stock dimension width: 10600 mm Djdpfx Afjx A Tbdsnecc

Condition: used, Donaldson Torit industrial dust collection system, main silo is approx. 40' tall with 2 blower fans, includes all duct work, dust collection system includes duct work inside building, does not include dust container shown in photo, unit only, 1 blower fan has 150 HP, 3 phase motor, control panel has Allen Bradley Panel View Plus 1000 touch screen display, winning bidder responsible for proper removal. Please contact auction manager for removal information of unit. Dedexdc Tfepfx Afnocc

Condition: excellent (used), MiVeg System 4080 skewering system for meat and veg kebabs. These are a far more reliable system than the normal French machines sold for this job. Cost new was EUR 160,000 Dcodou Tty Hopfx Afnjc

Condition: good (used), mileage: 515,050 km, power: 324 kW (440.52 HP), first registration: 06/2012, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 4,200 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,740 mm, total width: 2,550 mm, total height: 3,620 mm, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, traction control, trailer coupling, - Digital tachograph - Tachograph (control device) - Fixed - Short cab - PTO (power take-off) - Pump - Central lubrication Number of axles: 4, configuration: 8x4, payload: 18,965 kg, unladen weight: 17,035 kg, gross weight: 36,000 kg, total fuel tank capacity: 580 liters, trailer coupling, center axle trailer load (braked): 24,000 kg, king pin diameter: 40 DIN, fifth wheel: fixed, number of locks: 2, central lubrication, suspension type: air suspension, cab type: short cab, cruise control, tachograph (control device), digital tachograph, air conditioning, electric windows, electric mirrors, radio/cassette, color: blue, heated mirrors, reversing camera, lighting type: halogen lamp, climate control, seat heating, flashing lights, engine output: 324 kW (434 HP), fuel: diesel, Euro standard: 5, gearbox type: AS-Tronic, gearbox make: ZF, gears: 12, power steering, ABS, ASR, PTO (power take-off), type of PTO: 1, starter battery, system length: 600 cm, pump, hooklift height: 128, central locking, seats: 2, seat layout: 1+1, seat upholstery: fabric, seat adjustment: manual, crane, crane manufacturer: Palfinger PK 22002 EH, crane year: 2012, crane lifting capacity: 22, maximum load: 1,820 kg at 10.5 m, number of stabilizers: 2, CE certified, control position: both, remote control, crane position: behind the cab, sliding: 3, hydraulic auxiliary connections: 2, rotor Transmission Transmission: ZF, 12 gears, automatic Axle configuration Brakes: disc brakes Axle 1: tire size: 385/65R22.5; steered; tire profile left: 8 mm; tire profile right: 4 mm; suspension: leaf spring Axle 2: tire size: 315/80R22.5; twin tires; tire tread left inner: 11 mm; left outer: 6 mm; right inner: 2 mm; right outer: 6 mm; suspension: air suspension Axle 3: tire size: 315/80R22.5; twin tires; tire tread left inner: 4 mm; left outer: 7 mm; right inner: 12 mm; right outer: 12 mm; suspension: air suspension Axle 4: tire size: 385/65R22.5; lift axle; steered; tire profile left: 8 mm; right: 6 mm; suspension: air suspension Dcsdpfxjyhl Dio Afnoc Weights Unladen weight: 17,035 kg Payload: 18,965 kg Gross weight: 36,000 kg Functional Crane: Palfinger PK 22002 EH, year 2012, behind the cab Loading platform height: 125 cm Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Identification Registration: BZ-XT-06 Kleyn Trucks is one of the world’s largest independent dealerships for used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years and price classes. Why buy from Kleyn Trucks? Simple! • Large and fast-moving stock • Recognizable quality • Competitive prices • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more…. Please visit our website...

Condition: good (used), mileage: 376,667 km, power: 353 kW (479.95 HP), first registration: 11/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 6,050 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 8,420 mm, total width: 2,550 mm, total height: 3,290 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, - Digital tachograph - Tachograph (recording control device) - Fixed - Short cab - Power take-off (PTO) - Pump Number of axles: 4, configuration: 8x4, payload: 22,320 kg, curb weight: 13,680 kg, gross weight: 36,000 kg, total fuel tank capacity: 335 liters, trailer coupling, unbraked trailer load: 750 kg, center axle trailer load, braked: 24,000 kg, kingpin diameter: 40 DIN, fifth wheel: Fixed, number of diff locks: 1, suspension type: air suspension, cab type: short cab, cruise control, tachograph (recording control device), digital tachograph, air conditioning, electric windows, electric mirrors, color: multicolored, heated mirrors, lighting type: halogen, lane assist, climate control, seat heating, Bluetooth, warning lights, engine power: 353 kW (473 hp), fuel: diesel, Euro 6, transmission type: AS-Tronic, transmission make: ZF, gears: 12, power steering, ABS, ASR, power take-off (PTO), type of PTO: 1, starter battery, superstructure year: 2018, system length: 585 cm, manufacturer hooklift and cable system: VDL, system type: S-25-6200, pump, hooklift height: 132, central locking, seating capacity: 2, seat configuration: 1+1, seat upholstery: fabric, seat adjustment: manual Transmission Transmission: ZF, 12 gears, automatic Dcedpfx Afjxniudjnsc Axle configuration Brakes: disc brakes Axle 1: Tire size: 385/65R22.5; steered; left tire tread: 6 mm; right tire tread: 7 mm; suspension: leaf spring Axle 2: Tire size: 315/80R22.5; twin tires; left inner tread: 2 mm; left outer tread: 3 mm; right inner tread: 3 mm; right outer tread: 3 mm; suspension: air suspension Axle 3: Tire size: 315/80R22.5; twin tires; left inner tread: 4 mm; left outer tread: 5 mm; right inner tread: 4 mm; right outer tread: 4 mm; suspension: air suspension Axle 4: Tire size: 385/65R22.5; lift axle; steered; left tire tread: 9 mm; right tire tread: 9 mm; suspension: air suspension Weights Unladen weight: 13,680 kg Payload: 22,320 kg Gross vehicle weight: 36,000 kg Functional Loading platform height: 145 cm Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Financial Information Leasing rate: €1,253 per month (default, 72 months); ask for more information and terms Identification Registration: 42-BLP-2 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognized quality • Competitive prices • Professional conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates arranged quickly • Expert technical services • The security of "recognized quality" • And more.... Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in...