Used Hsk63 for sale (90)

Condition: ready for operation (used), Year of construction: 2008, number of axes: 3, This 3-axis Weeke Venture 1M CNC Wood Machining Centre was manufactured in 2008. It features a horizontal drilling unit with 6 individually programmable spindles and a grooving saw aggregate for X-Y direction processing. The machine is equipped with an automatic tool change spindle and a rear automatic tool changer with 6 positions. If you are looking to get high-quality wood machining capabilities, consider the Weeke Venture 1M machine we have for sale. Contact us for further details. • Configuration: V18 High Speed 7500 Giodpjy Hr Rnofx Ahnsu • Positioning system: Console table with laser positioning aid • Drilling unit: Horizontal drilling unit with 6 individually programmable spindles • Grooving unit: Grooving saw aggregate, 90° swivelling, for X-Y direction processing • Spindle: F1-HSK63, 9 kW, automatic tool change spindle • Tool changer: W6 rear automatic tool changer with 6 positions • Tool change assistance: Tool change aid device • Control system: Power control PC85T • Safety: CE-certified safety and protective equipment

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Gisdew S I Dgspfx Ahnsu Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, Year of construction: 2013, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process. Accessories: Total enclosure, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces. Probe, Automatic central lubrication, Coolant system for dielectric fluid, Automatic fire extinguishing system, Mist extractor, Machine lamp. Cutter outside diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outside diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm Tool weight: max. 20 kg Gjdpfx Ahjylkvlonjiu X axis travel: 500 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis rotation range: 360 ° E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2280 mm Weight approx.: 4800 kg Connected load: 5,4 kW colour: gray RAL 7035/7043

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] Gisdpfxsy Tzcte Ahneu EQUIPMENT - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Condition: used, Year of construction: 2003, Technical details: x-travel: 800 mm y-travel: 400 mm z-travel: 350 mm total power requirement: 44 kW weight of the machine ca.: 8,8 t dimensions of the machine ca.: 6,1 x 4,1 x 3,3 m tool taper: HSK63 number of spindle speeds: 36-12.000 Number of tools: 2 x 21 St. Gisdpsuqq Uqefx Ahnju rotary table diameter: 1340 mm

Year of construction: 2017, condition: excellent (used), With B + C axis Working travels 800 x 900 x 620 mm Table diameter 800 mm Spindle taper HSK63 Spindle speeds -15'000 rpm Tool changer 64 Pos. Control HEIDENHAIN iTNC 640 Gjdslhqz Ujpfx Ahnjiu Coolant through spindle Misc.accessories MARCELS MASCHINEN CH

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: VT0341, functionality: fully functional, High-performance machining center SPINNER VC850-5A Travel distances X850, Y510, Z510 mm High-performance milling spindle up to 18,000 rpm Power Pmax 20 kW / Nmax 66 Nm as a built-in hybrid spindle with direct drive, without belt Tool holder on the spindle HSK63 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in the X/Y/Z axes In the latest generation of SIEMENS "SINUMERIK ONE" control system - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point shifts - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL WHEEL on the operating panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element Electrical preparation for HOWIMAT 2-axis rotary tilting table on VC850/VC1150 2-axis ROTARY TILTING TABLE mounted on the right in the working area particularly rigid and space-saving, suitable for holding chucks or collets TILTING AXIS: Giedpfx Aey S Ttzohnju - Dividing accuracy +- 0.005 degrees - Swivel range 105 degrees - Maximum tangential moment 1,200 Nm ROTARY AXIS with direct drive via coaxial motor: - Dividing accuracy +- 0.005 degrees - Bore 80mm, spindle nose D=160 mm - Maximum tangential moment 500 Nm UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for using the additional tank up to 70/80 bar HIGH-PRESSURE TANK 70bar with paper band filter for flushing centrally through the spindle Additional compressed air supply at the spindle head Compressed air centrally through the milling spindle Flushing gun in the working area PREPARATION FOR SPINNER STANDARD PROBING SYSTEM Wireless SPINDLE PROBE ADDITIONAL HOOD on top for a closed working area STANDARD DOCUMENTATION in German consisting of machine manual and CNC manuals is delivered in digital form on the control system. Paper manuals available at an additional cost. RING EYES for crane unloading, set consisting of 4 pieces absolutely necessary for crane transport STANDARD PAINTING two-color in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demonstration machines, the images are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are included in the scope of supply only to the extent listed in the technical description. Please request a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 305.04.029.21, functionality: fully functional, operating hours: 5,820 h, input voltage: 400 V, type of input current: three-phase, table length: 3,090 mm, table width: 2,095 mm, Equipment: documentation/manual, Felder Format A4 milling plotter. The machine is fully functional and has been used. - Machine equipped with two Becker 500m3/h pumps. - Automatic tool length measurement. Gjdey Tuw Rspfx Ahneiu - Handheld terminal for axis control. - HSK63 tool holder with magazine. - 2 rows of limit stops (6 in total, 3 on the left and 3 on the right side of the machine). - Foot pedal for vacuum activation. - Automatic lubrication. - The machine’s production program is TPA CAD. - Yaskawa servo drives, Festo pneumatics. - HSD main spindle.

Condition: excellent (used), Year of construction: 2011, 4-AXIS MILLING AND ROUTING CENTER LOADER FOR 9 TOOLS Brand: POUWELS Model: DEF 1000 Type : SPEEDO Serial number: 135 Godpfx Aelc Hzwshneiu Year : 2011 (Machine deployed and visible in our workshops by appointment) The DEF 1000 router is designed for routing all types of wood parts exclusively. It is specialized for staircase manufacturing. MACHINING CAPACITIES : Movements (machining strokes) : - X travel: 6000 mm (option installed) Y movement: 1000 mm Vertical movement (Z axis): 380 mm - Maximum travel speeds : X axis: 75 m/min Y axis: 75 m/min Z axis: 30 m/min - C axis rotation: -90 +90°. MACHINE COMPOSITION - Control panel Windows 7 Pro computer - Ethernet hub - Manual or programmed control mode : Pouwels Prostair program direct link Autocad 2008 Control system: Num 1050 Digital Drive - 3-axis routing heads 7.5 kw - 0 to 24000 rpm - Horizontal routing head with rotation ( C axis ) 7.5 kw - 24000 rpm - Fixed side tool changer for 9 HSK63 F tools ER32 collets OTHER FEATURES : - Power supply : 400v Three-phase+N+T - Installed power: 15 kW In Max 37.5A - Suction cups Ø180mm and Ø120 h.70mm - One vacuum pump 170 m3/h - Pneumatic supply: 8 bars - CE standards - Suction: centralized outlet Ø 250 mm - Recommended flow rate: 8000 m3/h (5500 min.) Overall dimensions 8300 x 3500 x 2050 mm Weight 8560 kg Please consult us for the supply of consumables, accessories and/or vacuum systems. Machine offered as is. Prices ex-store. Delivery and additional services on request.

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 48 kVA, torque: 143 Nm, controller manufacturer: SIEMENS, controller model: 840D power line, workpiece height (max.): 800 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, total height: 3,700 mm, total length: 6,500 mm, total width: 3,300 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (min.): 45 rpm, spindle speed (max.): 16,000 rpm, coolant supply: 70 bar, spindle motor power: 30 W, number of slots in tool magazine: 80, tool length: 320 mm, tool diameter: 150 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HELLER MCi16 840Dpl • Year of manufacture: 2000 • Tool holder: HSK63 • Max. tool length: 320 mm • Chip-to-chip time: 2.8 s • Spindle power: 40 kW • Spindle speed: 45 - 16,000 rpm • B-axis: NC axis (360,000 x 0.001) • Travel X, Y, Z: 630 mm • Rapid traverse speed X, Y, Z: 40 m/min • Feed rate X, Y, Z: 40 m/min • Feed forces X, Y, Z: 10,000 N • Acceleration: 7 m/(s²) • Pallet changer: double (change height 800 mm) Godpfx Ahsy Rn H Hsnsiu • Magazine: chain magazine with 80 positions • 2nd control panel at magazine loading station • Hydraulic workpiece clamping • BLUM touch probe receiver • Interface for 5th axis • SIEMENS PCU • KNOLL VFR (vacuum rotary filter) system and chip conveyor • Coolant chiller unit • Oil mist extraction The machine has been used exclusively for finishing aluminum components and is being removed from production due to capacity reasons. Our company specializes in HELLER machine tools, and the above-mentioned machine has been serviced by us in recent years. A condition assessment was performed on-site and can be provided upon request. The spindle’s tool clamping system was replaced in 2025. The result of the machine geometry measurement will be provided as soon as available. The machine can be inspected under power by serious prospective buyers by prior arrangement. Location: 72379 Hechingen, Baden-Württemberg, ex works

Condition: ready for operation (used), Projector for optical data capture Electronic digital displays for measuring tool radius and height HSK63 toolholder for PowerLock tools Desktop PC with operating system PC is fully installed, configured, and tested with dedicated PowerCom software for the POWERMAT system User manual Gisdpfx Ahoy Sf Nzoneu Year 2010

Condition: new, Year of construction: 2025, Z-MaT UA650, 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD display Dual torque direct drive Travel (X/Y/Z): 800/800/550 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through spindle Spindle air curtain Spindle oil cooler Double arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Gsdpfxewku Evj Ahnjiu Max. tool length: 300 mm Max. tool diameter: 75/120 mm Table Table diameter: Ø 630 mm Max. workpiece diameter: 650 mm Max. table load: 850 kg T-slot (width x number x spacing): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120–670 mm A-axis swivel range (tilt): ±120° C-axis rotation: 360° Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoders Standard Equipment End-of-operation light, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air pressurized (XYZ) Automatic tool changer Air blow gun Coolant gun Coolant tank Coolant flush system (chip flushing) Full splash guard Transformer: 400V, 50Hz Control cabinet heat exchanger Automatic shutdown Leveling bolts and blocks Toolbox CE compliance Hinged belt chip conveyor Machine Size and Weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 16,500 kg Errors and prior sale excepted A wide range of automation options available

Condition: excellent (used), Year of construction: 2024, Model: CNC5003 Notes: Condition: Ex-demo CNC5003 is a state-of-the-art CNC machine, designed from the ground up to industrial standards for durability and process stability. The machine is specifically engineered for wood, panel materials, plastics, foam, composites, and light alloys. • FANUC controller • Working area: X - 3080 mm Y - 1540 mm Gjdpfxoyr Daws Ahnsiu Z - 200 mm • 6-zone vacuum table • HSK63 11kW 24000rpm electrospindle • Tool magazine (12 slots) Additional information • The vacuum table is divided into 6 zones, each with an individual valve. Each zone features 36 individually sealed vacuum points, providing a total of 216 individually sealable vacuum points. • Electrospindle: Our standard spindle motor is a high-power 11 kW unit with HSK63F. The spindle is driven by an inverter and reaches speeds up to 24,000 rpm. The spindle motor is equipped with ceramic bearings. • Automatic Tool Changer (ATC): The machine comes with a 12-position tool changer mounted on the gantry for fast tool changes. • The ATC magazine is conveniently accessed via a hatch for easy maintenance.

Condition: used, Year of construction: 2001, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, table width: 1,250 mm, table length: 2,500 mm, rotational speed (max.): 18,000 rpm, overall weight: 35,000 kg, CNC Siemens 840D universal head, HSK63 spindle Giedpfx Asy H Av Ishneu maximum spindle speed 18,000 rpm 100-position tool changer table 2500x1250 mm travels 2300x2300x1000 mm chip conveyor tool set

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Gisdpfx Ahjy Ibgzonju Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Gisdpsvu U Itofx Ahnsu Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 Gisdpfx Asr Ai Sqohnsu No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Total installed power (Kw) 27,5 (ca.) WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) Gijdpfxew Dc Nij Ahnou No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: excellent (used), HEIDENHAIN TNC430 with B + C axis Working travels 800 x 600 x 500 mm Table size Ø 280 mm Table swivelling +/-110° Table rotating 360° Spindle taper HSK63 Spindle speeds -15'000 rpm tool changer 30 pos. Giodpek Dz Ngefx Ahneu Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) Gijdpfx Aoyxn Tiehneu OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: good (used), Year of construction: 2010, machine/vehicle number: AA2/001307, functionality: fully functional, operating hours: 25,000 h, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 6,500 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 180 mm, controller manufacturer: NUM, total height: 2,750 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 6,500 mm, table width: 1,350 mm, controller model: 1040, feed length X-axis: 6,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 30,000 m/min, spindle motor power: 11 W, nominal power (apparent): 15 kVA, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 45,000 m/min, spindle speed (min.): 24,000 rpm, table height: 950 mm, Working travel of axes X-Y-Z: 6500 x 1350 x 250 mm Working area: 6500 x 1250 mm Gjdpjw Au N Sefx Ahneiu C-Axis = 640, B-Axis = 270 PRISMA milling unit with 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600–20,000 rpm Tool holder HSK63 Working table with TVN pads and vacuum cups Cross laser projector on working table TVN vacuum cup Pneumatic clamps Tool magazine for 24 tools Drilling unit Vacuum pump 5.5 kW, 250 m³/h CNC control NUM Operating system: Windows XP Xilog Plus Maestro Weight approx. 5,450 kg

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Gisdpefwvppefx Ahneu Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Giedpfx Ahei U Dxusnsu Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Gijdstt S D Rspfx Ahnju Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Gsdpfxett Sy He Ahnoiu Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Good condition. Available immediately.